Safari Refresh Button vanished from Tool Bar!

Uploaded Safari 4 and now find the Refresh Button has disappeared from the Tool Bar! I used it all the time when updating Web Sites and testing them live. Tried the Reload Page pull-down but it is not the same. The old page is still there. It's a pain to Reset Safari each time. Had to go over to FireFox! Any ideas? Or how do I get back to Safari 3!

Wesley wrote:
The refresh button is to the right within the address bar; or as mentioned Cmd-R works as always.
This is undeniably the case but I want it back where it was, close to the other controls. I also want the blue progress bar back. At least that gave some idea of how the page load was proceeding.

Similar Messages

  • How to add push button in application tool bar in SAP transaction VA01

    How to add push button in application tool bar in SAP standard transaction VA01 and how to implement the code for that function code.

    There is no scope to create a push button in application tool bar. Instead of that we can add in a menu bar.

  • How to create a new push button in application tool bar in GMGRANT thru BDT

    Dear SAP Gurus -
    We have a requirement in 'GMGRANT' transaction. We need to create a button in the application tool bar of 'GMGRANT' transaction. Once the button is activated, if the user clicks on the button then it will go to a new screen (external screen). User can input data in to the external sceeen and upon saving, the data will be stored in to a custom table and when user clicks on 'back ' button user should come back to the GMGRANT transaction.
    Just wanted to know, how to create / activate a new button on application tool bar of GMGRANT transaction and what are the configuration and detail steps to achieve the same through BDT.
    We went through a lot of documents on BDT but do not have a proper solution.
    Could you please help.
    Thanks in advance.
    Regards,
    Atul Mohanty

    hi,
    You can find user-exits (menu exits) to add new menu item.
    But, there is no possibility to add new buttons on application tool bar.
    Regards,
    Sailaja.

  • How to hide button in application tool bar

    Hi
    There is a standard SAP report. after executing it,
    There are 5 buttons in application tool bar .
    I want to hide 3 of the buttons,
    How can I hide them not by change program.
    (Ex, can I use transaction variant).
    Best Regards,

    try to use transaction variant....
    Edited by: shan palani on Dec 17, 2008 10:48 AM

  • Push buttons on application tool bar , should be changed based on radio but

    Hi fndz,
    i have 2 radio buttons on selection screen.
    depend on the radio button i select , the push buttons on 
    application tool bar of basic list should be changed.
    can u plz help me.
    Thanks & Regards
    kumar

    Hii..
    Parameters : r1 radiobutton group GRP1 ,
                        r2 radiobutton group GRP1 .
    START-OF-SELECTION.
       CASE 'X'.
       WHEN R1.
         SET PF-STATUS 'S1'.
       WHEN R2.
         SET PF-STATUS 'S2'.
       ENDCASE.
    Note: if you want to call the Same GUI Status (app toolbar), you can use the syntax
    SET PF-STATUS 'S1' EXCLUDING <ITAB>
    hope this solves ur issue.

  • Creating button in standard tool bar

    Hi gurus,
    I hve to create  button in standard tool bar along with the existing icons and buttons, plz help
    how to suppres the fields other than screen table methods?
    reward asure
    with regards,
    thambe

    hi,
    if u using ALV then go to SE41.
    Give SAPLKKBL as program name and STANDARD_FULLSCREEN as status....
    now click on Copy Status and in that give ur program and status name into To.....
    now in REUSE_ALV_GRID_DISPLAY
    FORM display_list.
      g_f_repid = sy-repid.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program       = g_f_repid
          i_callback_user_command  = 'USER_COMMAND'
          i_callback_pf_status_set = 'SET_STAT'
          it_fieldcat              = g_t_fieldcat[]
          it_events                = g_t_events[]
        TABLES
          t_outtab                 = g_t_itab
        EXCEPTIONS
          program_error            = 1
          OTHERS                   = 2.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM. " display_list
    FORM set_stat USING rt_extab TYPE slis_t_extab.
      SET PF-STATUS 'ZSTAT' EXCLUDING rt_extab.
    ENDFORM.                    "set_stat
    here my status name is ZSTAT which i gave in SE41...
    and in user_command form...
    FORM user_command USING u_comm LIKE sy-ucomm selfield TYPE slis_selfield.
      CASE u_comm.
        WHEN 'DET'.
        ........ur logic.........
      ENDCASE.
    ENDFORM.                    "user_command
    reward if usefull...

  • Safari refresh button?

    Hi, Please how do I add a refresh button to the Safari tool bar?
    Thanks in advance, Elizabeth

    Hello Elizabeth,
    Click on the small circular arrow next to RSS in the menu bar.  You shouldn't need to add it; it should be there.

  • How do I add a print button to the tool bar?

    When I open the menu there is not a "print" button to add to the tool bar. Even under customize there is not a "print" button. How do I print from mozilla?

    The Print button in the "3-bar" Firefox menu button drop-down list opens the Print Preview window.
    You can click the Print button in the Print Preview window or use the Print item in the File menu (File > Print) or use the Ctrl+P shortcut to have access to the print selection item and other print setup options.
    You can look at this extension:
    *Universal Print: https://addons.mozilla.org/firefox/addon/universal-print/
    There are other things that need attention.
    Your System Details list shows that you have a user.js file in the profile folder to initialize prefs each time Firefox starts.
    The user.js file is only present if you or other software has created this file and normally it wouldn't be there.
    You can check its content with a plain text editor (right-click: "Open with"; do not double-click).
    The user.js file is read each time Firefox is started and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
    You can delete the user.js file if you didn't create this file yourself.
    *http://kb.mozillazine.org/Preferences_not_saved

  • How to print/save CL_GUI_ALV_GRID data using button in custom tool bar?

    Hi,
    I have a screen 9002 where I have used a CUSTOM CONTAINER and the screen 9002 is called from 9001.
    I am showing an ALV GRID in the CUSTOM CONTAINER by using CL_GUI_ALV_GRID.
    Screen 9002 also has 2 buttons (PF-STATUS): PRINT and SAVE in application tool bar. Now, I need to print the data of ALV and save the data in excel by pressing these 2 buttons respectively. Please let me know the way-out. If these functionalities can achieved by standard tool of the screen 9002, it will be also OK.
    Thanks
    Arghya

    Hi,
    Why don't you use the function "excel inplace" in the ALV?  With the ALV you have some buttons "SORT/TOTAL/FILTER... and you have PRINT and EXCEL INPLACE"?
    Do you use the method   call method g_grid->set_table_for_first_display in order to display your data alv?
    Best regards

  • How to add button on application tool bar of standardt ransaction

    Hi All,
    Can any one let me know how to ADD the button in on application tool bar of standard transaction by using SHD0 transaction or any other solution.While adding the button I don't want do any code modification.
    Thanks,
    Vijay

    http://help.sap.com/saphelp_nw04/helpdata/en/c8/19762743b111d1896f0000e8322d00/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/83/7a18cbde6e11d195460000e82de14a/frameset.htm
    these are the avilable user Exits for the Tcode..C203
    XCZD0004 Extend authority check for the material-recipe allocati
    CMDI001 Determine explosion control for BOM
    CPAU0001 Enhancement for Authorization Check in Task Lists
    CPDO0001 Test units of measure for reference operation set
    CPRE0001 Enhancement for Reorgnization Checks in Task Lists
    Run this Program.. enter the Tcode. u'ii get teh BADI's exist for the Tcode
    REPORT Z_FIND_BADI .
    TABLES : TSTC,
    TADIR,
    MODSAPT,
    MODACT,
    TRDIR,
    TFDIR,
    ENLFDIR,
    SXS_ATTRT ,
    TSTCT.
    DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
    DATA : FIELD1(30).
    DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
    PARAMETERS : P_TCODE LIKE TSTC-TCODE,
    P_PGMNA LIKE TSTC-PGMNA .
    DATA wa_tadir type tadir.
    START-OF-SELECTION.
    IF NOT P_TCODE IS INITIAL.
    SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
    ELSEIF NOT P_PGMNA IS INITIAL.
    TSTC-PGMNA = P_PGMNA.
    ENDIF.
    IF SY-SUBRC EQ 0.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'PROG'
    AND OBJ_NAME = TSTC-PGMNA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM TRDIR
    WHERE NAME = TSTC-PGMNA.
    IF TRDIR-SUBC EQ 'F'.
    SELECT SINGLE * FROM TFDIR
    WHERE PNAME = TSTC-PGMNA.
    SELECT SINGLE * FROM ENLFDIR
    WHERE FUNCNAME = TFDIR-FUNCNAME.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'FUGR'
    AND OBJ_NAME EQ ENLFDIR-AREA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    ENDIF.
    ENDIF.
    SELECT * FROM TADIR INTO TABLE JTAB
    WHERE PGMID = 'R3TR'
    AND OBJECT in ('SMOD', 'SXSD')
    AND DEVCLASS = V_DEVCLASS.
    SELECT SINGLE * FROM TSTCT
    WHERE SPRSL EQ SY-LANGU
    AND TCODE EQ P_TCODE.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) P_TCODE,
    45(50) TSTCT-TTEXT.
    SKIP.
    IF NOT JTAB[] IS INITIAL.
    WRITE:/(105) SY-ULINE.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    Sorting the internal Table
    sort jtab by OBJECT.
    data : wf_txt(60) type c,
    wf_smod type i ,
    wf_badi type i ,
    wf_object2(30) type C.
    clear : wf_smod, wf_badi , wf_object2.
    Get the total SMOD.
    LOOP AT JTAB into wa_tadir.
    at first.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 'Enhancement/ Business Add-in',
    41 SY-VLINE ,
    42 'Description',
    105 SY-VLINE.
    WRITE:/(105) SY-ULINE.
    endat.
    clear wf_txt.
    at new object.
    if wa_tadir-object = 'SMOD'.
    wf_object2 = 'Enhancement' .
    elseif wa_tadir-object = 'SXSD'.
    wf_object2 = ' Business Add-in'.
    endif.
    FORMAT COLOR COL_GROUP INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 wf_object2,
    105 SY-VLINE.
    endat.
    case wa_tadir-object.
    when 'SMOD'.
    wf_smod = wf_smod + 1.
    SELECT SINGLE MODTEXT into wf_txt
    FROM MODSAPT
    WHERE SPRSL = SY-LANGU
    AND NAME = wa_tadir-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    when 'SXSD'.
    For BADis
    wf_badi = wf_badi + 1 .
    select single TEXT into wf_txt
    from SXS_ATTRT
    where sprsl = sy-langu
    and EXIT_NAME = wa_tadir-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED ON.
    endcase.
    WRITE:/1 SY-VLINE,
    2 wa_tadir-OBJ_NAME hotspot on,
    41 SY-VLINE ,
    42 wf_txt,
    105 SY-VLINE.
    AT END OF object.
    write : /(105) sy-ULINE.
    ENDAT.
    ENDLOOP.
    WRITE:/(105) SY-ULINE.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No.of Exits:' , wf_smod.
    WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
    ENDIF.
    AT LINE-SELECTION.
    data : wf_object type tadir-object.
    clear wf_object.
    GET CURSOR FIELD FIELD1.
    CHECK FIELD1(8) EQ 'WA_TADIR'.
    read table jtab with key obj_name = sy-lisel+1(20).
    move jtab-object to wf_object.
    case wf_object.
    when 'SMOD'.
    SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    when 'SXSD'.
    SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
    CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
    endcase.
    Please give me reward points...

  • TS4118 my refresh button disappeared from outlook so I can no longer sync with my icloud????

    I set up icloud last night to enable me to use my outlook calendar on my iphone. it worked. this morning, my refresh button on outlook disappeared and I can no longer sync the 2 calendars. help!

    crpomy wrote:
    Mine is showing in the innactive section.  Need to move active.  How to I do this?
    Go to Tools>Trust Center>Add-Ins, at the bottom next to "Manage:" choose "COM Add-Ins" from the drop-down list and click "Go".  In the next screen check "iCloud Outlook Add-In" and click OK.  You may need to close and re-open Outlook for the change to take place.

  • HT5271 I get error message that my version of Safari does not support community tool bar?

    Everytime I open Safari I get an error message that saids This version of Safari does not support the community tool bar. How can I fix this situation?

    That toolbar/ct plugin seems to cause problems for all who install it!
    If you are running Tiger or Leopard:
    Close Safari, then locate and delete the following files and it should be gone:
    /Library/Application Support/Conduit
    /Library/InputManagers/CTLoader
    /Library/Receipts/ctloader.pkg
    /Library/Receipts/<Toolbar name>.pkg
    /Library/Application Support/SIMBL/Plugins/CT2285220.bundle
    /Users/<User name>/Library/Application Support/Conduit
    where / is the root library on your Hard Disk.
    If you are running Snow Leopard you should also look here:
    Library/launchAgents/com.conduit.loader.agent.plist
    Library/Application support/conduit plugins
    Also, as mentioned by Gilli2000:
    Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
    Maybe it is harmless, but trash those items anyway!
    If you are running Lion:
    From the Finder Menu bar, select Go ▹ Go to Folder, and in the box that opens write:
    ~/Library/Application Support/Conduit
    Delete the second item if it is there.
    Now select Go to Folder again and enter  /Library
    From the folder that opens, delete the following items if they are there (you may need your login password):
    Application Support/Conduit
    InputManagers/CTLoader
    LaunchAgents/com.conduit.loader.agent.plist
    ScriptingAdditions/ct_scripting.osax
    then close the folder. Now select Go to Folder again and write: /Applications/Toolbars
    Delete that item and close the Finder windows you opened. Log out then log back in, and you should be rid of it.
    Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

  • Opening yahoo from tool bar, opens a tab to the left but you have to scholl to read

    When iI open yahoomail from the tool bar, it opens a tab to the left and you have to school to read it. if I open it after opening another tab and use book marks it will open in a full tab and work , or least it use too before it stopped working, but this you are working on. It is not much good to have to school.
    thanks Phil

    Is that a bookmark you are using to open Yahoo Mail?
    If so, right-click that bookmark and select '''Properties''', then un-check the preference for '''Load this bookmark in the sidebar''', and then click Save.
    Using JavaScript buttons on web pages for "Bookmark this Page" causes that preference to be selected when saving the bookmark in that manner. So, don't use those buttons, use the "Bookmark this Page" feature that is built into Firefox instead.

  • FCP x (trial) , does not have a "share" button in the tool bar

    hi
    did you get an answer to the question on how to export a file in the trial version of FCPX?  In my trial version there is no "share" button in the toolbar at the top of the screen.
    When i select file -> share -> .... i get a "blank" destinations screen, giving me no options as to where to export to.
    Can anyone help as this is my first project in FCPX and without exporting/sharing it is not worth purchasing the product.
    BTW my file size is 13GB - could this have anything to do with my issue?

    Yes, Share is in the File menu now (as well as to the far right of the tool bar).  If it is blank, something is wrong.  Try using the free application "Preference Manger" from Digital Rebellion to trash the FCPX pref files.  If that doesn't work, move the application from the Application folder to the Trash.  Then launch the App Store, in the Purchases section, click "Install" to the right of Final Cut Pro X (it will not effect your Projects and Events at all, they stay safe).
    File or project size shouldn't matter.  This is not a very common issue, but in the rare instances it does show up, one of the two solutions above will fix it.

  • How do i add buttons in the tool bar?

    Hi,
    I want to add buttons like "Load' in the tool bar.How do i do it? I am using LabView7.1
    Please help me..
    Regards
    Meenatchi

    Meenatchi wrote:
    I am creating one dialog,in that i want to add menu bar and title bar.
    See the attached VI, whose Window Appearance category is set to Top-level, from the VI Properties window.
    From this, you can go ahead customizing the menu bar to your wish.
    - Partha
    LabVIEW - Wires that catch bugs!
    Attachments:
    Top-level Application Window.vi ‏11 KB

Maybe you are looking for