Safari reload program 7.0 how?

Safari suddenly freezes with an attempt to reload a previous web page by sliding the page sideways with two fingers. I have to quit and restart Safari. There must be a glitch in the program. This only occurs on my desktop, not my other Macs. How can I trash the current program and download another copy?
aehaas

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Similar Messages

I have just updated to 10.7.3 and safari always reloads previous pages I have been on every time on open it, my home page is set to google yet it always reloads from the history, how do I stop this

I have just updated to 10.7.3 and safari always reloads previous pages I have been on every time on open it, my home page is set to google yet it always reloads from the history, how do I stop this

There is a setting in the System Preferences for this as well that may be causing it. Go to System Preferences>General>Restore windows when quitting and reopening apps - at the bottom of the window under Number of Recent items. Remove the checkmark from that setting.
Also - if you close all of your windows when you are done with Safari - it should open to your home page.

How to delete safari virus programs

how to delete safari virus programs from the publicity videos software

liviufrommontrouge wrote:
how to delete safari virus programs from the publicity videos software
I'm not sure I understand what that is. Can you clarify?
It's likely that jaredfs' proposed solution will work, if you are infected with some kind of adware. However, it's hard to tell whether that's the case from your description.

How to get original serial number to reload program onto new computer?

How to get original serial number to reload program onto new computer?

Hi rehe,
Please check the KB: Find your serial number quickly to find your serial number.
You can contact our chat support for help in retrieving your serial number: Serial number and activation support
Regards,
Rave

How to execute a reload program in SARA (adk's)

hi folks,
i have created a buisness object in T-code AOBJ. i have assigned write, delete and reload program to it. when i open t-code SARA and give my buisness object there i am able to see write and delete option there. i can execute my write and delete programs from SARA. how can i execute my reload program. ?? are reload program not executed by t-code SARA??? replies will be appreciated.
regards,
sudhir

Hi Sudhir,
Try this: In SARA, Choose menu Goto ->Reload.
By the way, just a word of caution, it is not recommended to reload archived data as it may cause inconsistencies. so please use it with care.
If your requirement is just to read the archive data, please make use of read programs based on ADK / Archive information system.
Hope this helps,
Naveen

I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

See below if the search engine setting was changed without your knowledge and you can't change it back.
You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
Step 1
In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that theVersion is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
This step does not completely inactivate Genieo.
Step 2
Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 3
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller. As he knows and intends, the uninstaller does not completely remove the malware.

I have a safari browser 5.1 version, how can I update safari browser

I have a safari browser 5.1 version, how can I update safari browser

You need to upgrade the computer's OS or switch to a product such as Firefox.
To upgrade, open the Mac App Store and try downloading Yosemite. If you get told it's incompatible, choose About this Mac from the Apple menu, check if the computer has at least a Xeon or Core 2 Duo(not Core Duo) CPU and 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(124663)

I have safari 5.10 10. How do i get to safari 6 or higher?

I have safari 5.1 10. How can i get to safari 6 or higher?

You need to be running Lion or newer. Open the Mac App Store and try downloading Mavericks. If you get told it's incompatible, choose About this Mac from the Apple menu, check if the computer has at least a Xeon or Core 2 Duo(not Core Duo) CPU and 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
Back up your data before upgrading. Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(109863)

Reload program

Hi experts,
1.Can the custom specific fields be included in archiivng or not.
2. Whether the standard reload program is needed for all objects.
3. Once the data is archived , Is it possible to reload the data back into the tables without using the reload program.
4. I want to run my archiving process every month using a particular object in batch mode.
In that case How do I assign the required archive flag automatically.
Thanks In Advance,
Shree.

Hi Swarna,
1.Can the custom specific fields be included in archiving or not.
Yes, if the custom field is included in the table that can be archived with Custom Archiving object. If this custom field is added to the standard table then check archiving object & archive with it.
2. Whether the standard reload program is needed for all objects.
In most cases client will not go for reloading option for all the archived data, it might required for Master data or Financial documents and in ECC system SAP has removed options of reload. Most of my case reloading option has not loaded the data back into all tables so with this my suggestion is try to convenience client at the initial phase for not going for reload options.
3. Once the data is archived , Is it possible to reload the data back into the tables without using the reload program.
No, it is not possible to reload the data back into the system without using reloading program.
4. I want to run my archiving process every month using a particular object in batch mode.
Yes, you can do this by creating Dynamic variant and scheduling it every month.
If the archiving object requires deletion flag to be set as a pre-requisites then you can create a custom program to set this or if that archiving object has program to set the deletion flag then use it. This as to be done every month before variant schedule date and time.
-Thanks,
Ajay

When I move my curser over certain things I get this Message in a window that pops up and says "We noticed you may have signed in or signed out in another window click ok to reload your page." How do I get this to stop.

When I move my curser over certain things I get this Message in a window that pops up and says "We noticed you may have signed in or signed out in another window click ok to reload your page." How do I get this to stop.

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
You may have to create an Allow cookie exception for that server.
* Tools > Page Info > Permissions

Safari and camera have dissappeared, how do I retrieve?

safari and camera have dissappeared, how do I retrieve?

I would look in restrictions
if restrictions was not set to remove them
then I would look in all folders
if I still could not find it I would reboot the ipad

I have home videos on my ipad that are no longer on my windows 7 pc and i need them back on my computer so that I can email them out (can't share from that program on ipad), how do i get them back on my pc?

I have home videos on my ipad that are no longer on my windows 7 pc and i need them back on my computer so that I can email them out (can't share from that program on ipad), how do i get them back on my pc?

Hey JennaPickle,
If you want to get your personal vidoes off your iPad and onto your computer, follow the steps in this document:
iOS: Importing personal photos and videos from iOS devices to your computer
http://support.apple.com/kb/HT4083
Take care,
Delgadoh

Safari Developer Program License Agreement: We are unable to process your request

Hi all,
I'm trying to sign up for the free Safari Developer Program. Everything proceeds as normal until the step Agree to License[1] after which point I receive the message "We are unable to process your request." I have tried to logout of the Member Center and cleared all apple.com cookies. I've tried to start the process again from the beginning too. I've verified all my contact details. I get the same result each time.
1. https://developer.apple.com/ios/enroll/listAgreement.action
I have had an Apple ID with this email address for several years, but this is my first time trying to join the Developer Program. Can anyone offer some advice? Thanks.
Lucas

OK, I'm answering my own question. I've filled-in the support ticket. The lady from Apple support just called me and helped me deal with the issue as there was no other option to solve it by myself.
That's where I have filled in my support case (very bottom of the page):
https://developer.apple.com/support/safari/enrollment.html

I have purchased the program and now how do I convert a PDF file into excel?

I have purchased the program and now how do I convert a PDF file into excel?

Hi johnhnk2,
Please see Getting Started with ExportPDF | Adobe Community.
That document will tell you what you need to know to get started. Please note, however, that it can take 24-48 hours for an order to process fully.
Best,
Sara

In Safari, history has disappeared. How do I get it back?

In Safari, History has disappeared. How do I get it back?

Try quitting Safari completely and then reboot your iPad.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Safari reload program 7.0 how?

Similar Messages

Maybe you are looking for