Safari RSS starts, then immediately stops!

Brand new PowerBook (running 10.4.2 w/all updates); copied contents of my previous PowerBook using Migration Assistant; when I try to launch Safari RSS it begins to launch but immediately closes, giving me a report form to send to Apple.
I've been using Firefox, but thought I'd give Safari RSS another chance on this new machine. Any suggestions?

Hi Mark
There are so many things that can give this behaviour.
• Dirt in Camera (cleaning tape ?)
• Bad tape with lot's of drop-outs
• Bad FW-Cable
• low free space on internal (start-up) hard disk
• untidy hard disk (Apple Disk Util tool)
• error in pref file - delete and iMovie makes a new OK one
• iMovie in PAL-mode and Your Camera in NTSC
• tape recorded in LP-mode (90min on 65min tape) - Don't - but use SP
See - lot's of guessings
Exclude those and please report back on progress.
Yours Bengt W

Similar Messages

  • Workflow Manager Backend services starts and then immediately stops.

    I cannot start the Workflow Manager Backend service.  It starts and then immediately stops.  The event log shows the error "Service cannot be started.  System.Security.Crytography.CryptographicException: Keyset does not exist". 
    This problem may have started when the password for the account that the service runs under expired.
    The Windows Fabric Host Service and the Service Bus Gateway and Service Bus Message Broker services are all running.
    SJT00

    I cannot start the Workflow Manager Backend service.  It starts and then immediately stops.  The event log shows the error "Service cannot be started.  System.Security.Crytography.CryptographicException: Keyset does not exist". 
    This problem may have started when the password for the account that the service runs under expired.
    The Windows Fabric Host Service and the Service Bus Gateway and Service Bus Message Broker services are all running.
    SJT00

  • Purchased song starts and immediately stops

    I purchased my first song and downloaded it to my iPod Nano 2Gb. When it starts playing it immediately stops and goes back to the initial menu. This song plays in iTunes, and the other songs in the iPod play just fine.
    I noticed the format is a "Protected AAC file", showing up in Windows as a MPEG-4 Audio File (Protected).
    Any help?
    iPod Nano 2Gb    

    I noticed the format is a "Protected AAC file",
    showing up in Windows as a MPEG-4 Audio File
    (Protected).
    That would be the iTunes Music Store file format
    (completely normal).
    Try this article:
    http://docs.info.apple.com/article.html?artnum=303854
    Let me know if that doesn't work.
    CG
    After trying all the steps in the above link, i finally used iPod Updater to restore the iPod, then it finally worked. All of this was performed under full administrative rights. Many thanks for your help.

  • PowerPC apps start then immediately quit all the time...

    9 times out of 10 a PowerPC app will start and then immediately quit. This happened with 1 GB RAM and it happens with 2 GB. It has happened since day one and I'm sick of it.
    On a daily basis I use Word, Excel, Photoshop CS 2, Quicken 2005, Thoth, and a few other PowerPC apps. I cannot find, or do I want to find alternatives to these apps. I like them.
    I've repaired permissions, run Disk Utility, reinstalled the 10.4.7 combo updater, et cetera. Nothing remedies this problem.
    What could be causing PowerPC apps to almost never run on my brand new $3000 MBP?
    MBP 2.16 GHz   Mac OS X (10.4.7)  

    Sorry to hear of problems although you may have to end up purchasing Office for Mac 2004 if you don’t have already, and perhaps newer versions of other software favorites. With newer technology, comes new features and updated software to leverage that new technology.
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wo/0.RSLID?mco=1 F8DF60D&nclm=MSStudentTeacherOffer
    Now, if we can get Apple to make this forum web site more stable - that would be a true upgrade.
    Regards,

  • Recently when I load a safari page it almost immediately stops responding. I haven't had any problems until recently.  What's going on?

    Just downloaded MacKeeper onto my 2011 MBP. Suddenly when I open safari, every page stops responding almost immediately after loading. The pages load from the bookmarks, so I know that the connection is good. Once a page hangs I can open another page, which then also hangs. I'm working through FireFox now but I'd really like to resolve this problem. Any suggestions>

    HI Doug...
    MacKeeper is the problem. Your Mac does not rrequire a third party so called, "cleaning" utility. It will do more harm than good as you have already experienced.
    Follow the instructions here > Uninstalling MacKeeper
    Results of an ASC forum search for MacKeeper >  Community Search: Apple Support Communities

  • Why is it when I try to re download apps that were previously deleted from my iCloud, the download looks like it is going to start then it stops almost instantly?

    OK, so this problem has been going on for quite a few months, and has persisted through several iOS updates:
    I deleted both Facebook messenger and Instagram from my iPhone 5s. they have been stored to my iCloud. Now, when I try to re-download just those 2 apps (doesn't happen with any others I have noticed yet), it looks like the download is going to start, but almost immediately switches back to the download from cloud button. I have signed out and back in to my iCloud account and my apple account and neither have worked. A hard reset did not work either. Repeatedly tapping (hey I was frustrated!) did not work either. updating my iOS did not work. It only happens to these 2 seemingly popular, well developed apps. Can anyone provide me a solution? Thanks!

    I Also want to try to avoid doing a full reset if possible. Or whatever the process is called that erases all your photos and messages and apps, Etc.

  • Safari 5 Starts, then immediatly quits!

    Hey. I am runnin Windows Vista Home Basic, i used to use Safari 5 alot lately and had no problems with it. Until I tried to load it up today. It would load the browser and then just immedialy quit. I posted the Problem Signiture Below. Someone help please. Ive already tried to upgrade it, but that didnt help.
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: Safari.exe
    Application Version: 5.33.17.8
    Application Timestamp: 4c498967
    Fault Module Name: MSVCR80.dll
    Fault Module Version: 8.0.50727.4053
    Fault Module Timestamp: 4a594c79
    Exception Code: c0000005
    Exception Offset: 00014500
    OS Version: 6.0.6002.2.2.0.768.2
    Locale ID: 1033
    Additional Information 1: c677
    Additional Information 2: 17d78cc6adf9329c09f590d128f173d6
    Additional Information 3: 81d4
    Additional Information 4: cb73b1a88da0ca485c1ac1feba889b8b

    Fault Module Name: MSVCR80.dll
    Fault Module Version: 8.0.50727.4053
    I usually associate that particular dll with user-account-specific Safari errors caused by damaged settings and preferences files.
    Can you check something for me please? This isn't going to be a cure in itself, but it'll tell us the likeliest best course of action to take next with fixing the issue.
    Create a new user account on the PC with full administrative rights. Log out of your normal account and log into the new account. Launch Safari in the new account. Does it launch in there, or do you get the same sort of symptoms as in the usual user account?

  • NetworkManager daemon starts then immediately kills itself

    Hello,
    I am running ArchLinux on a Thinkpad T60 and am trying to use NetworkManager to manage my wifi and ethernet. I have the drivers loaded for both as ifconfig -a shows them. I have installed NetworkManager from the kernel.org mirror as well as the GNOME applet for it. However when I attempt to start NetworkManager it with /etc/rc.d/networkmanager start it shows BUSY then DONE as if it is working. However the daemon does not live after that, it just kills itself with nothing left in the dmesg.log or daemon.log. I have all the default settings for this and have setup my /etc/hosts file correctly as well. Both Dbus and Hal are working fine as GNOME launches happily with everything running normally.
    Would anyone have any idea why NetworkManager would be doing this?
    Thanks in advance

    Also, (I wasn't clear from your post), did you add networkmanager to your daemon array in /etc/rc.conf? You should comment out network and add networkmanager like this DAEMONS=(!network networkmanager). And comment out #eth0="dhcp", and INTERFACES=(!eth0 !wlan0). Do a search for networkmanager on the wiki, there is a page devoted to it.
    Last edited by stlarch (2011-02-18 16:51:50)

  • After installing Photoshop Elements 12  Organizer starts OK but Editor starts then immediately terminates with no error messages. Suggestions appreciated.

    After new install of Adobe Photoshop Elements 12 editor will start but just terminates/disappears with no error message. The organizer starts and runs OK   Win7/64 with latest maintenance  i73770, Nvida GTX 670 16 GB memory. Install log shows no errors. Same thing happened with Adobe Premier Elements 12. 

    Troubleshoot system errors, freezes | Windows | Adobe software

  • Syncing problem, starts then stops... HELP!!!

    I recently reformatted my hd and reinstalled itunes. Now, when i go to sync it starts as its supposed to but then immediately stops. I cant figure it out as Ive tried searching for solutions everywhere! I found people having the same problem but it was because they have windows vista 7.0 beta which seems to be their problem. I on the other hand do not have 7.0, i have 6.0 and have never had this problem before the reformat. My iphone is up to date as is my itunes. Please help! PLEASE!

    If you watch the progress bar, does it stop during the backup (which comes first) or during the sync process (contacts, photos...)
    If it stops right at the start, copy the backup folder located \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\ to a save place. Then delete the backup in itunes/settings/devices and try again to sync.

  • Starts then STOPS!?!?

    Hello.
    I recently reformatted my hd and reinstalled itunes. Now, when i go to sync it starts as its supposed to but then immediately stops. I cant figure it out as Ive tried searching for solutions everywhere! I found people having the same problem but it was because they have windows vista 7.0 beta which seems to be their problem. I on the other hand do not have 7.0, i have 6.0 and have never had this problem before the reformat. My iphone is up to date as is my itunes. Please help!

    Hi there,
    Try downloading and running the hp print and scan doctor located here. It can resolve a lot on its own and give us a better idea of what is going on.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • When i login to my account and it takes me to the desktop, the error sound plays, then the rainbow wheel appears, and finder immediately stops responding

    It started yesterday when i was listening to itunes when all of a sudden the music stopped playing and i had to hold down the power button to shut it down and reboot, and then, when i logged back in, the error sound played, and then finder opened up, but the window was grayed out like i had another app selected, bu i didn't, so i tried to open up itunes and the icon started bouncing and then it stopped midbounce and i had to reboot again because finder wasnt responding. now when i log in, the error sound plays, and finder immediately stops working and then i have to reboot again because i cant click anything and i cant properly relaunch finder. please help

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • FTPSVC/SMTP Starting then Stoping immediately

    Hi,
    When i am starting  FTPSVC or SMTP , its starting, then stoping immediately with this messages : -
    "Services on local computer started and then stoped. Some services stop automatically if they are not in use by other services or programs "
    Basically, I am using Samba4 As Domain controller ( Please dont say, Go away as its not Windows Domain controller ) as i dont think its the issues with Samba4 domain controller as this problem only for this server.
    when I added a servername/Administrator into
    Local Security Policy - > Local Policies -> user Rights -> log on as a service
    i got this messages :
    Failed to save loal policy databasee
    I have also tryed to install the patch which is provide for that issues.
    however IIS is running fine .
    Can any one please help me to find out
    what configuration/permission i need to change to make it work ??
    ( if i remove the server from Domain, its works fine , but  also, there are other server is joined to the same domain controller but they works fine)
    Really appreciated your help.

    Hi alam_2001,
    Based on the error message, please navigate to
    Run, type Services.msc and click OK. In Services console, please right click those two services and select
    Properties. In the service Properties, please:
    Select the
    Dependencies tab, then check and make sure system components which this service depended on run as normal.
    In
    Log On tab, please check which account it logged on as.
    If this issue still persists, please navigate to Event Viewer and check if you can find some related error
    messages.
    In addition, based on your description, it seems to be more related to the IIS configuration. I suggest that
    you would post your question in IIS Forum. I believe we will get a better assistance there.
    http://forums.iis.net/
    Hope this helps.
    Best regards,
    Justin Gu

  • Can I stop Safari from starting when connecting to a network on my iPad?

    Can I stop Safari from starting when connecting to a network on my iPad?
    On my home network the wi-fi connection happens automatically without opening Safari. But on my work network, when attempting to make a connection the iPad lets me enter my user name and password, but then tries to open the webpage www.apple.com, which is blocked by iPrism as entertainment, so I can't actually connect to that network. oes anyone know a fix for this problem?

    Can I stop Safari from starting when connecting to a network on my iPad?
    On my home network the wi-fi connection happens automatically without opening Safari. But on my work network, when attempting to make a connection the iPad lets me enter my user name and password, but then tries to open the webpage www.apple.com, which is blocked by iPrism as entertainment, so I can't actually connect to that network. oes anyone know a fix for this problem?

  • I have two imacs in different rooms and Safari started crashing immediately after opening on both machines. latest version is installed.Any ideas?

    I have two iMacs in different rooms and Safari started crashing immediately after opening on both machines. latest version is installed.Any ideas?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Maybe you are looking for