Safari running too slow!!!!

I already try reseting it, erasing cookies and cache, enable, and turning off extensions.. this issue started 4 days ago.also sometime when I open a page it send me to another one but its full of ads like I have a extension installed but I have the extensions turned off.

Check your top sites -- never used them - but they seem to have been populated with RSS sites that I went into once that were refreshing automatically - and things like msn which I didn't use.
I removed all top sites (actually prevents them from becoming top sites again) and now remove any that pop up in there. That has speeded up the load of sites I want to go to.

Similar Messages

Application running too slow on sun T5440 but run normal on sun M3000

Hi all,
I have application running on sun server T5440 4x8x1.4 GHz, 64 GB RAM, application running very slow though load average too low. when I install my application on another server SUN M3000 (One CPU 1x8x2.5GHz, 8GB RAM), application run smoothly.
Here is my server T5440 info:
Code:
bash-3.00# uname -a
SunOS 5.10 Generic_142909-17 sun4v sparc SUNW,T5440
Psrinfo -pv
Code:
bash-3.00# psrinfo -pv
The physical processor has 64 virtual processors (0-63)
UltraSPARC-T2+ (chipid 0, clock 1414 MHz)
The physical processor has 64 virtual processors (64-127)
UltraSPARC-T2+ (chipid 1, clock 1414 MHz)
The physical processor has 64 virtual processors (128-191)
UltraSPARC-T2+ (chipid 2, clock 1414 MHz)
The physical processor has 64 virtual processors (192-255)
UltraSPARC-T2+ (chipid 3, clock 1414 MHz)
/etc/system
Code:
set semsys:seminfo_semopm=10000
set semsys:seminfo_semmsl=10000
set semsys:seminfo_semmni=1024
set max_nprocs=50000
set msgsys:msginfo_msgmnb=2097152
set msgsys:msginfo_msgmni=2560
set msgsys:msginfo_msgtql=2560
set shmsys:shminfo_shmmax=1073741824
set shmsys:shminfo_shmmni=1000
set rlim_fd_cur=10000
Ipcs
Code:
bash-3.00# ipcs -a
IPC status from as of Wed Jun 13 12:31:01 ICT 2012
T ID KEY MODE OWNER GROUP CREATOR CGROUP CBYTES QNUM QBYTES LSPID LRPID STIME RTIME CTIME
Message Queues:
q 62 0x1388 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 61 0x1387 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 60 0x1318 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 59 0x12a9 --rw-rw-rw- topx topx topx topx 0 0 2097152 9069 9071 10:25:38 10:25:38 8:36:22
q 58 0x100f --rw-rw-rw- topx topx topx topx 0 0 2097152 9069 9070 10:06:16 10:06:16 8:36:22
q 57 0xfa0 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 9071 9069 10:25:38 10:25:38 8:36:22
q 56 0xf30 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:20
q 55 0xc27 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:28:14
q 54 0xbb8 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 172 9066 10:47:08 10:47:08 8:28:14
T ID KEY MODE OWNER GROUP CREATOR CGROUP NATTCH SEGSZ CPID LPID ATIME DTIME CTIME
Shared Memory:
T ID KEY MODE OWNER GROUP CREATOR CGROUP NSEMS OTIME CTIME
Semaphores:
s 104 0x9c4 --ra-ra-ra- topx topx topx topx 3 12:31:00 8:36:20
s 103 0xa8c --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 102 0xd48 --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 101 0xce4 --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 100 0x26de --ra-ra-ra- topx topx topx topx 8 10:19:34 8:28:14
s 99 0xc1c --ra-ra-ra- topx topx topx topx 1 8:36:20 8:28:14
s 98 0xbb8 --ra-ra-ra- topx topx topx topx 1 8:43:50 8:28:14
s 97 0xaf0 --ra-ra-ra- topx topx topx topx 500 8:36:20 8:28:14
s 96 0xa28 --ra-ra-ra- topx topx topx topx 500 8:36:20 8:28:14
s 95 0x7ee --ra-ra-ra- topx topx topx topx 1 8:36:20 8:28:14
s 94 0x7e4 --ra-ra-ra- topx topx topx topx 1001 8:36:20 8:28:14
s 93 0x7da --ra-ra-ra- topx topx topx topx 220 8:36:20 8:28:14
s 92 0x7d5 --ra-ra-ra- topx topx topx topx 200 12:05:15 8:28:14
s 91 0x7d0 --ra-ra-ra- topx topx topx topx 200 8:56:42 8:28:14
s 90 0xc80 --ra-ra-ra- topx topx topx topx 2 12:31:01 8:27:52 –a
Prstat
Code:
PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP
9202 topx 1460M 893M sleep 59 0 0:16:37 0.2% integrity_check/1
12455 root 3880K 3600K cpu65 59 0 0:00:00 0.0% prstat/1
9080 topx 142M 130M sleep 59 0 0:00:52 0.0% intf_resp_low/1
9125 topx 102M 78M sleep 59 0 0:00:36 0.0% interface_vsc/1
9121 topx 88M 80M sleep 59 0 0:00:32 0.0% interface_tcu/1
9120 topx 89M 80M sleep 59 0 0:00:29 0.0% interface_rcm/1
9124 topx 87M 78M sleep 59 0 0:00:29 0.0% baplie_merge_v2/1
9122 topx 86M 78M sleep 59 0 0:00:28 0.0% interface_eih/1
9115 topx 88M 77M sleep 59 0 0:00:33 0.0% intf_batch_even/1
9114 topx 88M 77M sleep 59 0 0:00:39 0.0% intf_event/1
9117 topx 87M 78M sleep 59 0 0:00:32 0.0% interface_bxy/1
9118 topx 86M 78M sleep 59 0 0:00:29 0.0% interface_ppm/1
NPROC USERNAME SWAP RSS MEMORY TIME CPU
41 topx 334M 2237M 3.4% 0:30:17 0.3%
43 root 186M 195M 0.3% 0:14:45 0.0%
1 noaccess 152M 136M 0.2% 0:04:00 0.0%
1 smmsp 3688K 11M 0.0% 0:00:04 0.0%
1 lp 1208K 3880K 0.0% 0:00:00 0.0%
6 daemon 7264K 9944K 0.0% 0:00:26 0.0%
Total: 93 processes, 259 lwps, load averages: 0.40, 0.39, 0.39
Prstat –mL
Code:
bash-3.00# prstat -mL
PID USERNAME USR SYS TRP TFL DFL LCK SLP LAT VCX ICX SCL SIG PROCESS/LWPID
9202 topx 0.9 0.0 0.0 0.0 0.0 0.0 99 0.0 2 0 5 0 integrity_ch/1
9080 topx 0.4 0.0 0.0 0.0 0.0 0.0 100 0.0 5 0 20 0 intf_resp_lo/1
9114 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 13 0 66 0 intf_event/1
17282 root 0.1 0.2 0.0 0.0 0.0 0.0 100 0.0 20 1 324 0 prstat/1
9117 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 interface_bx/1
9118 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 interface_pp/1
9115 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 15 0 80 0 intf_batch_e/1
9121 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_tc/1
9125 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_vs/1
9120 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_rc/1
9123 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_vs/1
9124 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 baplie_merge/1
9122 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 8 0 56 0 interface_ei/1
9119 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 8 0 56 0 interface_cp/1
9204 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 15 1 1K 0 sys_check/1
259 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 13 2 98 7 in.mpathd/1
1 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 3 0 99 3 init/1
1337 noaccess 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 100 0 100 0 java/14
140 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 19 0 114 0 nscd/851
Total: 90 processes, 256 lwps, load averages: 0.40, 0.40, 0.39
Vmstat
Code:
bash-3.00# vmstat 1 10
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr m0 m1 m2 m3 in sy cs us sy id
0 0 0 87720712 60562856 173 645 199 44 44 0 0 0 0 0 0 886 2819 525 0 1 99
1 0 0 87563976 59743040 73 327 0 15 15 0 0 0 0 0 0 747 2831 439 0 1 99
0 0 0 87563656 59742808 61 306 0 15 15 0 0 0 0 0 0 770 2684 427 0 1 99
1 0 0 87563656 59742824 0 0 0 0 0 0 0 0 0 0 0 886 1302 525 0 1 99
1 0 0 87563656 59742816 62 305 0 15 15 0 0 0 0 0 0 722 2652 420 3 1 96
1 0 0 87563656 59742840 554 2777 0 139 139 0 0 0 0 0 0 959 9736 749 1 1 97
0 0 0 87563456 59742672 1155 5735 0 292 292 0 0 0 0 0 0 1113 17489 1145 1 3 96
1 0 0 87563656 59742840 0 0 0 0 0 0 0 0 0 0 0 845 1613 654 0 1 99
0 0 0 87563656 59742856 62 305 0 15 15 0 0 0 0 0 0 900 2647 526 0 1 99
0 0 0 87563656 59742856 62 304 0 15 15 0 0 0 0 0 0 683 2661 396 0 1 99
Mpstat
Code:
CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl
0 0 0 130 261 1 121 0 13 1 0 0 0 1 0 99
1 0 0 35 133 2 143 0 9 6 0 64 0 0 0 100
2 0 0 5 20 2 17 0 3 0 0 29 1 0 0 99
3 0 0 0 3 0 2 0 0 0 0 0 0 0 0 100
4 0 0 3 14 0 15 0 2 2 0 13 0 0 0 100
73 0 0 474330 77 3 0 7 0 2 0 2596 67 33 0 0
73 0 0 487701 37 0 0 7 0 8 0 2670 66 34 0 0
73 0 0 476377 14 0 0 8 0 1 0 2610 66 34 0 0
78 0 0 473950 11 1 0 7 0 13 0 2593 67 33 0 0
78 0 0 480562 9 0 0 7 0 4 0 2630 66 34 0 0
79 0 0 320989 14 1 0 8 0 0 0 1766 77 23 0 0
79 0 0 479148 9 0 0 7 0 8 0 2622 66 34 0 0
79 0 0 479426 13 0 0 7 0 2 0 2622 67 33 0 0
79 0 0 488949 9 0 0 8 0 13 0 2678 66 34 0 0
64 0 0 482229 15 2 0 8 0 7 0 2638 65 35 0 0
77 0 0 475571 14 1 0 7 0 8 0 2602 67 33 0 0
69 0 0 467795 22 1 0 7 0 40 0 2563 66 34 0 0
69 0 0 318623 9 1 0 7 0 8 0 1751 77 23 0 0
66 0 0 465179 92 1 2 8 0 62 0 2545 66 34 0 0
When my application running, some of CPU have IDLE state = 0 and hold the CPU while another CPU have IDLE state 100. I think this is my bottleneck but I cannot find any solution for solve that.
Netstat
Code:
bash-3.00# netstat -i
Name Mtu Net/Dest Address Ipkts Ierrs Opkts Oerrs Collis Queue
lo0 8232 loopback localhost 244022 0 244022 0 0 0
nxge0 1500 TOPX-01-DUMMY1 TOPX-01-DUMMY1 3594863 0 5801650 0 0 0
nxge1 1500 TOPX-01-DUMMY2 TOPX-01-DUMMY2 160954 0 151230 0 0 0
iostat
Code:
bash-3.00# iostat -xn
extended device statistics
r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b device
0.1 0.1 1.5 30.8 0.0 0.0 1.8 9.0 0 0 md/d0
0.0 0.1 0.8 30.8 0.0 0.0 0.0 9.9 0 0 md/d1
0.0 0.1 0.8 30.8 0.0 0.0 0.0 9.8 0 0 md/d2
0.0 0.0 0.0 0.0 0.0 0.0 0.0 15.2 0 0 md/d3
0.0 0.0 0.0 0.0 0.0 0.0 0.0 10.9 0 0 md/d4
0.0 0.0 0.0 0.0 0.0 0.0 0.0 19.4 0 0 md/d5
0.0 0.0 2.2 1.5 0.0 0.0 0.8 7.4 0 0 md/d6
0.0 0.0 1.1 0.7 0.0 0.0 0.0 8.5 0 0 md/d7
0.0 0.0 1.1 0.8 0.0 0.0 0.0 8.2 0 0 md/d8
0.0 0.1 0.4 0.6 0.0 0.0 7.6 10.0 0 0 md/d9
0.0 0.1 0.2 0.6 0.0 0.0 0.0 9.1 0 0 md/d10
0.0 0.1 0.2 0.6 0.0 0.0 0.0 7.8 0 0 md/d11
0.0 0.0 0.0 0.0 0.0 0.0 0.1 10.4 0 0 md/d12
0.0 0.0 0.0 0.0 0.0 0.0 0.0 8.5 0 0 md/d13
0.0 0.0 0.0 0.0 0.0 0.0 0.0 8.4 0 0 md/d14
0.1 0.5 2.1 32.3 0.0 0.0 0.0 9.9 0 0 c0t0d0
0.1 0.5 2.1 32.3 0.0 0.0 0.0 9.8 0 0 c0t1d0
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 c1t0d0
0.9 0.9 125.3 123.1 0.0 0.1 0.0 34.2 0 2 c4t600144F0CC00C29A00004D1E456F0003d0
0.3 0.7 20.7 53.9 0.0 0.0 0.2 8.2 0 0 c4t600144F0CC00C29A00004D1E43880001d0
0.1 0.2 50.7 111.5 0.0 0.0 0.0 59.1 0 1 c4t600144F0CC00C29A00004D1E453E0002d0
Please help me find the bottleneck of my T5440 server?Thanks so much for all your help.

Moderator Comment and Action:
@ O.P.,
You cross-posted this to at least two other forum web sites:
http://www.linuxquestions.org/questions/solaris-opensolaris-20/application-running-too-slow-on-sun-sparc-t5440-but-run-normal-on-sun-m3000-4175411155/
http://www.unix.com/solaris/189945-application-running-too-slow-sun-sparc-t5440-but-run-normal-sun-m3000.html
... and didn't think that was important enough to simply mention the fact.
Timestamps suggest that OTN was the last place you posted to.
Poor forum etiquette.
Why would anyone spend the time to try to give help that you have already received elsewhere? That's a waste of their time.
(Yes, you already received the suggestion to use Dtrace in one of those other sites.)
This thread is locked as irrelevant.

Mackbook pro 10.7.2 lion running too slow!!!

mackbook pro 10.7.2 lion running too slow!!! why ?

Dunno. Dunno anything about your Mac, free hard drive space, ram, etc. No info no answers.

Since downloading Mountain Lion, why is Safari running very slow? I've check the internet and it's fine.

Since downloading Mountain Lion, why is Safari running very slow?

You're going to have to be more specific and include some details.

Why is Safari running so slow under Mountain Lion?

Why is Safari running so slow under Mountain Lion?

I have other mac's on my home network that are still running Snow Leopard and the are performing well. I wanted to use the iCloud so I upgraded and instantly started experiencing the slow down, to the point of ridiculousness. Other function are mixed some normal speed, others a day on the beach with the spinning ball. Firefox is at full speed, good thought, haven't checked Chrome yet.
Last night and hooked into a projection unit that adjusted my screen resolution for a presentation and after the event my Mac reset back to the normal settings and Safari launched and is running normal speeds so far. In the past there have been issues with performance speeds and certain resolutions, has anyone had similar luck or is this a fluke?

Laptop running too slow how can i run a clean up application or system check.

My Laptop is running too slow and is constantly buffeting, how can i run some clean up software or a system check.

If your Mac runs slowly:
http://support.apple.com/kb/PH19031?viewlocale=en_US&locale=en_US
Start up in Safe Mode. http://support.apple.com/kb/PH18760
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Repair Disk
Steps 1 through 7
http://support.apple.com/kb/PH5836
Run EtreCheck for a system report.
https://discussions.apple.com/docs/DOC-6173
FileVault encryption may make the Mac run slowly after installing new version of OS X.

APO - SNP Alert Macros running too slow

Hi,
We have created alert macros which run for next 27 weeks for 38000 Product-Location Combinations. They are running too slow.
We are deleting alerts externally using program /sapapo/amon_reorg and then running this macro with "ADD" . This macro slows down once it starts filling up alert table with 100,000 records. What are the best practices for writing the macro so that it runs fast ?.
Thanks.

Is it necessary to write all the alerts? What I mean is, do you filter the results when you view them through the Alert Monitor?
If your alert profile has a minimum threshold set for an alert type, then you can read this threshold in the macro and only write alerts that fall below the threshold.
e.g.
Step: Get Threshold Values : ( 1 Iterations :Initial;Initial )
    Action Box: Get Threshold Value
      LAYOUTVARIABLE_SET( 'Alert_Thresh' ;
      ALERT_PROFILE_THRESH( SDP_ALERT_PROFILE' ; '4100' ; 'I' ) )
Where SDP_ALERT_PROFILE is the profile that contain sthe minimum threshold you want to use and 4100 is the alert type. The I is for information, can use either W for Warning or E for Error as well.
Then use the variable Alert_Thresh to check if your value falls below this, only then write the alert.
Regards
Ian

FCP X running too slow

I am experiencing FCP running too slow, finding it hard to edit footage.

You are not the first to see this slow down.. But often by deleting render files can solve this slow down or restart the computer. I know this should not be so, but untill Apple make some fixes there is little to ad. You are actually doing everything right. And I assume you are using better formance not high quality.

Mac book pro safari running extremely slow

Not sure what to do. Was working fine yesterday and now today it's slow or not working. Google chrome is running just fine. Thank you in advance! Need help!
Problem description:
Safari running extremely slow and sometimes not at all
EtreCheck version: 2.1.6 (109)
Report generated January 24, 2015 at 7:25:16 AM MST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (Retina, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro10,1
1 2.3 GHz Intel Core i7 CPU: 4-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 336
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD spdisplays_2880x1800Retina
NVIDIA GeForce GT 650M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 0:43:2
Disk Information: ℹ️
APPLE SSD SM256E disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 249.78 GB (11.71 GB free) (Low!)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Adware: ℹ️
Geneio [Remove]
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
User Launch Agents: ℹ️
[loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Google Drive Application (/Applications/Google Drive.app)
Google Chrome Application Hidden (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.287 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.287 - SDK 10.6 Cannot contact Adobe
AnyMeeting_v1.6: Version: AnyMeeting_v1.6 1.6 - SDK 10.9 [Support]
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Support]
JavaAppletPlugin: Version: Java 7 Update 17 Check version
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
WebEx64: Version: 1.0 - SDK 10.6 [Support]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      8% WindowServer
      4% Google Chrome
      1% sysmond
      0% fontd
      0% Google Drive
Top Processes by Memory: ℹ️
249 MB Google Chrome
241 MB WindowServer
206 MB Safari
206 MB Google Chrome Helper
172 MB spindump
Virtual Memory Information: ℹ️
530 MB Free RAM
3.75 GB Active RAM
2.97 GB Inactive RAM
1.22 GB Wired RAM
4.17 GB Page-ins
23 MB Page-outs
Diagnostics Information: ℹ️
Jan 24, 2015, 07:20:12 AM /Library/Logs/DiagnosticReports/nsurlstoraged_2015-01-24-072012_[redacted].cpu_ resource.diag [Details]
Jan 24, 2015, 06:42:49 AM Self test - passed
Jan 21, 2015, 08:26:20 PM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-01-21-202620_[ redacted].cpu_resource.diag [Details]

Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
Back up all data before making any changes.
Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If not, do that now and see whether there's any change.
If your browser is Safari, then from the Safari menu bar, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If the Downloads button (with the icon of a downward-pointing arrow) is showing in the toolbar, click it and then click Clear in the box that appears. The download history will be removed. Any change?
If you're running OS X 10.9 or later, select the Advanced tab in the Preferences window and uncheck the box marked
          Stop plug-ins to save power
Any change?
Quit and relaunch the browser. Any change?
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
If other browsers and Internet applications are also affected, follow these instructions and test. Any change?
If Parental Controls is active for any user, please turn it off and test. Any change?
If only Safari is affected, launch the Activity Monitor application and enter "web" (without the quotes) in the search box. If a process named "Safari Web Content" is shown in red or is using more than about 5% of a CPU, select it and force it to quit by clicking the X or Quit Process button in the toolbar of the window. There may be more than one such process. Any improvement?
Follow the instructions in this support article. Any change?
Open the iCloud preference pane and uncheck the box marked Photos, if it's checked. Any change?
Are there any other devices on the same network that can browse the Web, and are they affected?
If you can test Safari on another network, is it the same there?
If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

Laptop run too slow and hang

I bought toshiba setelite amd quad core 4 gb ram 640gb hdd model is l745d laptop 1 months ago , and this laptop running too slow , and hang many times and heatin too much and when I play song there songs play stop play stop mean cauz of hang so plz tell me what is the reason is there a hdd problem motherborad problem or ram problem plz tell me

Hi I recommend you go back to factory setting. That will eliminate software problems.
Dokie!!
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Java web start application runs too slow...

Hello,
I am new to Java Web Start. I have created a java web start application and when i enable web start from local Execution, then it works perfectly well. But when i upload it on server and then download the application, then it is too too slow...i mean it takes minutes to get the output on clicking some button....my jnlp file is as under:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<jnlp codebase="http://(web server code base)" href="launch.jnlp" spec="1.0+">
<information>
<title>ERD</title>
<vendor>Deepika Gohil</vendor>
<homepage href="http://appframework.dev.java.net"/>
<description>A simple java desktop application based on Swing Application Framework</description>
<description kind="short">ER Deign Tools</description>
</information>
<update check="always"/>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.5+"/>
<jar href="ERD_1_2.jar" main="true"/>
<jar href="lib/appframework-1.0.3.jar"/>
<jar href="lib/swing-worker-1.1.jar"/>
<jar href="lib/jaxb-impl.jar"/>
<jar href="lib/jaxb-xjc.jar"/>
<jar href="lib/jaxb1-impl.jar"/>
<jar href="lib/activation.jar"/>
<jar href="lib/jaxb-api.jar"/>
<jar href="lib/jsr173_api.jar"/>
<jar href="lib/ant-contrib-1.0b3.jar"/>
<jar href="lib/jaxb-impl.jar"/>
<jar href="lib/jaxb-xjc.jar"/>
<jar href="lib/FastInfoset.jar"/>
<jar href="lib/gmbal-api-only.jar"/>
<jar href="lib/http.jar"/>
<jar href="lib/jaxws-rt.jar"/>
<jar href="lib/jaxws-tools.jar"/>
<jar href="lib/management-api.jar"/>
<jar href="lib/mimepull.jar"/>
<jar href="lib/policy.jar"/>
<jar href="lib/saaj-impl.jar"/>
<jar href="lib/stax-ex.jar"/>
<jar href="lib/streambuffer.jar"/>
<jar href="lib/woodstox.jar"/>
<jar href="lib/jaxws-api.jar"/>
<jar href="lib/jsr181-api.jar"/>
<jar href="lib/jsr250-api.jar"/>
<jar href="lib/saaj-api.jar"/>
<jar href="lib/activation.jar"/>
<jar href="lib/jaxb-api.jar"/>
<jar href="lib/jsr173_api.jar"/>
</resources>
<application-desc main-class="erd.screen1">
</application-desc>
</jnlp>
I dont understand the reason. Could you please help me out.
Thank you,
Deepika Gohil.

Check your web server's access logs to see how many requests web start is sending for each jar. After you've loaded the application the first time, for each subsequent launch, if you've got everything configured right, you should only see requests for the JNLP file and maybe some gifs because web start should load everything else out of the cache (if you're using the version-based download protocol). Or if you're using the basic download protocol, then you might see requests for each jar file, but even in this case, if your web server is prepared to evaluate the last-updated attribute for each jar request and for jars that have not changed, respond with no actual payload and a header value of Not-Modified, then that should run almost as fast.
You might also want to consider changing the "check" attribute of the "update" element from "always" to "background" for a couple of reasons. It should allow your app to start sooner (but this means that you might have to launch once or twice after an update is applied to the web server before the update shows up on the workstation). Also, my impression is that "always" is broken and prevents web start from ever checking to see if your jnlp file has been updated if you launch your app from a web start shortcut - launching from a browser is less likely to have this problem, depending on how often your browser is configured to check for updated resources.

Macbook air running too slow

My Macbook air is runnning too slow. I thought it was my internet service at home, but it is everywhere. Can someone help me clean out old or unneeded files? Thanks!

I wonder if there's some online activity going on (as it used to run OK) which is hogging CPU / memory?
If you open Activity Monitor and click on the "percentage" field it will order the processes so you can see which is taking up most.
You could try disconnecting from the internet to see if that makes a big improvement... if it does, maybe something wrong with a site you're visiting?

Safari 5 too Slow

Hi, Im using Safari 5 and I have to problems, one I a Web developer so Im trying with <video> tag (html5) and when I play a movie it spends like 50 minutes to load I used a extenseion on Safari to convert You tube flash player into html5 but it spend a lot of time to load and I want to enjoy these cool features of html5, Second: The reader its too slow I cant even see any Article because it takes a lot of Time to load and is impossible to scroll down without closing it.
Please Help me.

Yes, as long as your Mac meets the minimum requirements.
http://store.apple.com/us/product/MACOS_XSNGL
If you upgrade to SL, make and back up all your important files first.
Bear in mind, upgrading from one Mac OS X to the next may not have any effect on how fast Flash / HTML 5 content streams.
How's your internet speed?
http://www.speedtest.net/

Safari runs toooo SLOW after Time Warner took over from Adelphia cable

I have a Motorala cable modem SB5100 which with my previous Adelphia cable connection worked great. About 3 months ago, Time Warner took over Adelphia here in San Diego. Since that time, my commuter has been running sooo slow! I talked with the Time warner tech who suggests my modem may not be working. My question to you techies (which I am not) is it the modem which they are trying to get me to change (I own it) and rent theirs or is it my computer?? Could I have picked up a virus or have I done something to my computer which is slowing the internet use. It takes forever to access any site or turn a page. I find it hard to believe that my modem is the issue since it worked fine with Adelphia. TWC in fact uses the same modem as I have with other clients. Is there anything else I can do or run to see if it is the computuer versus the modem? Any help is greatly appreciated.
Thanks!!

I have this same problem - but I do not understand the 'add a location' - do you add a city or state? I understand everything else -
I have Road Runner -
Please forgive if I have posted this in a wrong place - I am a 68 year old 'little ole lady' and not very computer saavy!
But I'm learning - Very slowly!
I have Roadrunner too.
This is what I did (subsequent to the referenced
thread)
Go to the System Preferences>Network panel
- Location - set up a personal location by clicking
on the drop down menu and selecting "add a location".
Use a name familiar to you. Once established,
select "apply".
Next, click on the "Show" drop down menu and select
Network Port Configurations. Only Ethernet (or
Airport) ought to be checked. Move it to the top of
the list (you can drag it). Select "apply".
Back to the "Show" menu, depending on your
connection select "Ethernet" or "Airport". Click on
the TCP panel. There enter 4.2.2.2 in the DNS
servers box and select "apply". Or, as an
alternative, follow the DNS suggestions outlined
here.
Personally, I have found the OpenDns codes to be most
effective for my system.
There is no virus affecting Macs.
Message was edited by: Hawaiian_Starman

Why does my safari run so slow and does not want to download?

I have an IMac Intel running Mountain Lion and my internet Safari is sooo slow or it just does not download. I had to use my laptop to go to support - here - because my desktop safari is still stuck.

Try troubleshooting Safari extensions and third party plugins.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow all other plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
Check download speed here > Speedtest.net - The Global Broadband Speed Test
Less than 15Mbps, contact your ISP for upgrade options.

Safari running too slow!!!!

Similar Messages

Maybe you are looking for