Safari save as window opens larger than screen size and I can't get to the
In safari, I choose File -> Save As. The save dialogue window is taller than my screen and the buttons get buried under my bottom toolbar. I can't reach the save buttons and I can't seem to reach the right hand corner to manual resize it. I've tried clicking the green button in the top left hand corner but it doesn't change a thing.
thanks to anyone that can clear this up.
s
I tried clicking the blue export button so its pointing down and the save dialogue window does shrink. However, the adjustable dashes that normally appear in the bottom right hand corner, are not there. The only appear when the export button is pointing up. Too bad I can't reach it.
Your 2nd idea worked! My display was already at max resolution BUT I had a 2nd monitor and dragged the save box over and the smaller display was enough to reach that bottom corner.
yeah!
Similar Messages
-
When I first open Firefox, it appears fine, then one second later it expands so that I cannot see any thing but the current message. The only way I seem to be able to even exit is to use the Windows Task Manager to kill the application. The other user on the same machine does not have this problem. We are both using Firefox version
Which security software (firewall) do you have?
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls -
The main part of the safari page is grey and won't respond/can't type in any commands. I can move back through the previous pages, and even open new ones via the URL, but can't get onto the main part of the page and I can't get onto the 9 page option. !?
Help, please.Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
How do I reset the keypad shortcuts on a Convoy? When I flip open the phone a new text message screen opens and I can't get to the menu.
That's weird that these iphones are restored/activated through iTunes. I have a Apple so I have iTunes, yay!! I am guessing that the link that you gave me will tell how to put this iphone into Recovery mode? Now, this old iphone would of been activated on his laptop, which is with him and he is out of state. I have a new Apple, his new iphone would of been activated on our new Apple computer because he was here for Christmas and he didn't bring his laptop with him, or did he bring it with him, I don't remember now.... Now the question is, will I be able to restore his old iphone on my new computer seeing it would of activated on his laptop which is with him out of state. I am so worried that I am going to lock up this phone now. I thought I deleted the orginal guestion, and rewrote it, good grief, lol Oh wow, you are a level 10, I would be at a level -10!
-
I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.
What specific KB?
Do you know it works?
I set my 2103 nMP with an older (black) Apple USB KB and it worked fine -
How can I install the iMac Graphics Firmware Update 2.0, if the screen is white and I can't get to the Apple menu? My computer has 5 vertical purple lines against white screen at startup before the Apple logo appears and the spinning gear...then everything disappears and the screen hangs on the white screen. I have tried unplugging and removing all my peripherals and the COMMAND, OPTION, P & R set of keys and still nothing. I have tried COMMAND C to start up from cd and it only tells me to turn off the computer and turn it back on. I found information on Apple's Support pages regarding the iMac Graphics Firmware Update but I am unable to download and install if I can't get to the Apple menu. Can anyone help?
You may have hardware problem, I think a visit to your local Apple Store or AASP is in order.
-
I want to click to open the message but it is opening when I select it, and I can't get rid of the open Pane below the messages.
Excellent. Thank you very much...
-
My old iMac and OS 10.4 will not accept the New iTunes Version 10 application and I can't get past the screen offering to download iTunes 10. This is wrong and I need help getting past this situation. Help!
Sure, you can get around it if you don't need the newest version of iTunes. I still use version 7.5 because the newer versions didn't strike me as offering anything I needed.
If you do need a version 10-something then you will have to upgrade your operating system to Leopard (fi your computer will support it) at least. If you need 10.5 for some reason then there's no getting around it, you will have to buy a new computer. -
help! my first mac! and I can't get past the Welcome menu window... I try to select "united states" and want to continue but nothing happens. Any idea why?
Restart the Mac, and start over, it very well could be frozen. This is not the way you would like to start out your Mac experience!
-
Problem with printing graph larger than screen size in labview6 (plots are shopped).
I have attached with my message the report I try to print. It is a Labview 6 vi.
I had no problem with Labview 5. But with Labview 6, the plots are shopped (all the rest of the report is correct). What is printed is not what I see.
The graph is intentionnaly built very large, then rescale to fit page, in order to improve the print quality of the plots. I repeat it, it worked fine with Labview 5.
Thanks if you can help.
Lionel.
Attachments:
Print_of_large_scale_graph.vi 284 KBHi Lionel,
I experienced a similar problem days ago: re-compiling a vi from LV 5.1 to LV 6.0.2 its front panel could not be printed anymore; no error, just a blank sheet.( The mass compile procedure did not reported any error).
The only way to get out from this headache was to re-build the vi in LV 6.0.2, I simply selected all its diagram and copied it in a new vi, saved it and I got print-outs!
Try it.
Good luck,
Alberto -
Hello hello,
I am a french user and i have a big problem with safari.
Safari doenst want to open certains websites ( such as Allocine.fr) and i have a message on the console:
09/05/2014 11:12:18,000 kernel[0]: need filter
09/05/2014 11:12:18,000 kernel[0]: need filter
09/05/2014 11:12:18,000 kernel[0]: need filter
I have already disabled all the plug-ins but the problem is still here!!
Thank you for helping mePlease read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I just opened my new ipad2-32GB. It is connected to my macbook pro and itunes is opened. But it is stuck on a screen for language choices. How do i get to the correct screen to begin using it?
yes, thanks. I needed to reset using the power button and home button and hold for longer than i thought. After some serious worry (I'm an electronic illiterate!) I do have everything working and synced with my laptop and phone.
I am glad to have discovered the "support community" site -
Photoshop is too large for my Macbook Pro screen. I cannot access the resize handles - they're off the screen and I can't drag it. Any solution?
Do you see the red, yellow, and red window buttons? If so click on the green one.
If you don't see them then you are possibly in full screen mode, and pressing the "F" key once or twice allow you to get back to normal mode. -
My screen disappeared and I can't get it back
I posted this problem last week, but I may not have explained it properly. While on Firefox, the page suddenly disappeared and all I can get is a picture of the page when I mouse over the icon in the taskbar. Clicking on the picture doesn't restore the page. If I click on the icon itself, the page appears to fly off my screen and flies back when I click again, but it doesn't restore to full screen. I can't access any links or buttons because I don't have a web page at all, and I can't reset Firefox for the same reason. Is there anything I can do to fix this without actually using a web page?
Thanks to the one person who replied last week, but I can't access the page to use the links. I need a solution that doesn't involve a web page.* Use Restore or Maximize in the right-click context menu of the Taskbar icon to set focus to the Firefox application if you do not see the Firefox window.
* Open the system menu of that Firefox window via Alt+Space and see if you can move and resize the window into view by using the keyboard cursor keys.
If this works then first close all other open Firefox windows and then close Firefox via "File > Exit/Quit" to save this setting.
If the above didn't help then see:
* http://kb.mozillazine.org/Corrupt_localstore.rdf -
How does Adobe create a desktop icon when I open a web pdf document, and how can I get it to stop?
I am finding a host of pdf file icons cluttering up the desktop when I exit the Web after researching a topic. I have saved some files with the 'save as' feature, but there is nothing else I have done.
I have looked through the usual properties, options looking for clues for this automatic program, to choose a different one... and have yet to find anything indicating this program or process.
How is this happening and how can I stop it?
Thank you!Thanks for your interest in helping- This system has Firefox (whatever is recent) , Windows 7 Professional, Adobe Reader XI.
While on the Web, I have opened, perused, then saved docs to file using 'save as' option in the browser; and on closing the browser, I see numbers of pdf shortcuts on the desktop.
Also, this kind of thing has occurred inconsistently, so there has been nothing "usual" in my actions to which I can attribute these icons.
Sorry - I delete them and clean out the recycle bin, or I'd be able to tell you whether these were shortcuts or the actual files. I'm trying to resurrect the image in my mind, and I believe they may have been the docs, not simply shortcuts...
Thank you for your time!
[private data removed]
Maybe you are looking for
-
I just rented an SD version of a movie using iTunes on my MacBook Pro because there was no SD option available on my 3rd generation ATV (and I had to update my CC anyway). The movie is downloading now and if I wanted to, I could watch it as it downlo
-
How to get the list of columns of a transaction output
Hi All, My requirement is like this: I want the list of columns of a transaction.In a drop down, I am displaying all the transactions.I will select any transaction and want to populate the list of columns of that selected transaction in another drop
-
i accidentally hit a key and a black bar is appearing at bottom of screen that keeps talking everything i type , how do i get rid of it?
-
Hi All, We have requirement to exect the bleow query by not using Custom SQL select * from A a where a.x1 not in (select b.x1 from B b). Is this possible using simple DBadapter by selecting "*perform an Operation on table*" by modifingt the Toplink i
-
I have some database related questions
hey all i am currently designing a java GUI program for a dvd renting shop. this program obviously needs a databse, i was just wondering how much possibly a database on a home pc could hold data because this shop have about 15000 DVD title and about