Safari scrolling does not work in osx mavericks please solve this issue

safari scrolling does not work in osx mavericks please solve this issue

I know it is a limited topic, but could you provide a little more detail?

Similar Messages

  • SanDisk USB 3.0 Card Reader does not work with OSX Mavericks.

    Since updating to OSX Mavericks (10.9) My  USB 3.0 SanDisk "ImageMate All-in-One" Card Reader has begun to fail.
    It all seems to work proper at first. The memory card shows up in finder and I'm able to browse the files. But when I try to transfer any files it un-mounts from finder and only transfers the first file.
    This does not happen under previous OSX versions. I have tried on other computers since, so the card reader is fine.
    My USB 2.0 card reader saved my life this time. It works totally fine.
    Is this a known problem? Are you guys working on it?

    Solved in this post here:
    https://discussions.apple.com/message/24016337#24016337

  • The botton to open a new tab is not working. How I can solve this issue?

    the bottom next to the tabs, the one that opens a new tab fast is not working, also the ctrl+T keyboard command is not working also. The only way to open a new tab is right click on the mouse, but always on some link, I can not open a new blank tab.
    Thanks

    Try uninstalling the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and the current version of Firefox.

  • Image display control scrolling does not work properly when zoomed in

    I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
    Has anyone noticed this behaviour, and what would be a reliable solution to avoid this? 
    Dirk

    Hello,
    no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
    I have attached a VI for simplicity (although there is hardly any code in it).
    If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position. 
    I think it is a bug in the implementation of the image display control.
    Thanks,
    Dirk
    Attachments:
    scrolling.vi ‏818 KB

  • Hp scanner software Scan 3 does not work with osx yosemite

    The older software called HP Scan 3 does not work with OSX 10.10. Where can I download an update for this software? 

    Hello @ringie,
    Welcome to the HP forums.
    I understand that you would like to scan from your Photosmart premium C410 to your Mac 10.10.
    I would like to help.
    There is currently no updated software.
    Try the following work around.
    Scanning in OS X v10.10 Yosemite without HP Software
    Hope this helps get you scanning.
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • Huawei e3276 does not work on OSX 10.10 please help

    After I installed Yosemite Huawei e3276 does not work on OSX 10.10, please advise any work around for this issue - Thank you

    Found a very easy solution online.  Just download the software here and install. works immediately.
    http://translate.google.com/translate?hl=en&sl=sv&u=http://www.tre.se/privat/kun dservice/teknisk-support/Mobilt-bredband/Uppgradering-modemrouter/Yosemite/&prev =search

  • Scrolling does not work in LR

    I've been frustrated by this for a while now. When in LR (currently on version 4.2, but same thing happens in earlier versions too), scrolling does nothing. If i'm trying to scroll up or down a panel, nothing happens.
    I'm on a Lenovo W701 running Win & 64bit. The scrolling does not work using either the track point or the touchpad.
    The work properly in all other applications.
    The pointer will change to an icon the represents scrolling while in LR, but nothing happens. Any thoughts or suggestions?
    If there is any other information that you might need, let me know.
    Thanks!
    Quinn

    What about a mouse? Does the wheel scroll?
    Sent from phone.

  • Mp600r does not work after installing mavericks 10.9 what do I do now ?

    Canon Mp 600r does not work after installing Mavericks 10.9 What do I do now ?

    This thread should help:
    https://discussions.apple.com/message/19407500#19407500?ac_cid=tw123456#19407500

  • Scroll does not work.

    Hi,
    Scroll does not works.
    How can I fix it?
    P.S Photoshop CC 2014.2.2
    Thanks,
    Max

    I have discovered the solution and it involves an issue I suspected. After the restore of my old Time Machine Lion files to my new MBP running ML, the restore restored my computer back to Lion. After an install of ML, my computer worked perfectly except the fancy Scroll and zoom featured we all love from the trackpad. Ha already installed ML on other partitions and the trackpad worked perfectly on them.  Even the guest login's trackpad worked perfectly but not the main admin account.
    First thought was to create a new admin account and copy everything from the old admin to the new admin and then delete the old admin account. Hated the idea because all files had to be copied rather than moved.
    So what was left to do. I had thought of deleting all the apple preferences from the library and replace them with the contents of the library on another partition in ML. First I deleted old preferences many of which were old Lion preferences. That didn't solve the issue.
    I forgot that Lion and ML HIDE the user library so I was working on the wrong library. Discovered the Terminal command "chflags nohidden ~/Library" and I chose to reveal the user library on a ML partition.
    Solution:
    I booted into another ML partition. I guess that I could have booted into the new admin user account and changed the permissions  to access the old admin users Library But I chose to boot
    from another ML partition: copy ALL the com.apple. XXXXX.plist files and the folder  BY Host. It has special hidden files. Other  way is to copy the Preferences folder we'll say into the Desktop.
    I then proceeded to delete ALL the com.apple…….plist files and the Host folder into the trash. Then I copied all the apple.com…plist files and the Host folder and then rebooted. And now my wonderful Trackpad works as mountain Lion intended it to work.
    I'm leaving this solution because there's someone else in the MacWorld with the same issue.
    Ted

  • Two finger scrolling does not work on my MacBook (late 2008)

    Two finger scrolling does not work on my MacBook (late 2008) with either the notebook trackpad or a b/t conected magic trackpad.  Yes, I've set system preferences.  Suspect a driver or s/w problem.  Ideas?

    Saw another post that hinted that you need to go to accessibility settings:
    System Preferences > UniversalAccess > Mouse & Trackpad > Trackpad Options
    Enable scrolling (and I enabled dragging while I was at it and it worked.  Looks like wierd things can get set even if you don't mean it to.

  • MB Air two finger scroll does not work for a user but does for another

    Hi
    MB Air. 10.9.3.
    Defective Trackpad was just replaced. Two finger scroll does not work for the main user. I made a test log in and two finger scroll works. I booted off an external drive and two finger scroll works.
    I pulled all of the user preferences out, logged out and in and still does not work. Zapped PRAM. Checked all trackpad settings. No luck.
    Tried this in Terminal:
    defaults write -g com.apple.trackpad.scrollBehavior 2
    Any ideas?

    This sounds strange but check the settings in Settings>Accessability for the track pad. I belive your problem lies there not in Track Pad set up in Settings.

  • Horizontal Scroll does not work with Apple Magic Mouse

    Horizontal Scroll does not work with Apple Magic Mouse as it does with other Adobe software such as Photoshop.

    The system preferences window for the mouse has changed. The GUI elements are different.

  • Two finger scrolling does not work on Synaptics touchpad + clicking problems in web browsers

    Hello,  Since yesterday, i have problems with my synaptics touchpad on my HP Elitebook 8570w.The two finger scrolling and scrolling at the edge of the pad does not work.Also in google Chrome, all the links open in a new tab and when i try to click the new tab, it closes (normally that is the action when i click it with the middle touchpad button) Even in the practice mode of the synaptics settings of the touchpad, the two finger scrolling and edge scrolling does not work. Both options are enabled in the settings. I already tried to roll back the driver and reinstall the driver, without any effect.I expect the problem is the touchpad or the buttons itself. Is there a way to test the buttons and touch pad? How can i solve this problem?  please help me  sincerely, Karel 

    I would try installing the Windows 8.1 (64-bit)  Synaptics touchpad driver available in your sleekbook's web support download section before using compatibility mode.  Try the available earlier versions if the current driver does not work for you. 
    If you still do not have positive results, then use compatibility mode (choose Windows 8) on all three Windows 8.1 synaptics touchpad drivers, starting with the most current one.
    To use compatibility mode to install the driver softpaq just right click on the file and choose troubleshoot compatibility. Choose Windows 8 and run the installer.
    The following video has a decent explanation, but the narrator does not get to the point for a bit. Skip forward to minute 4  and watch it from there.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • " help me please"  I have Windows 7 installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me

    " help me please"  I have Windows 7  32 bit installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me
    I have to boot with a Windows
    When I use the Mac operating system not have a problem  and DisplayPort to VGA Adapter Working properly
    why does not work with windows ?
    What should I do؟
    I'm grateful to give advice
    tanks
    [email protected]

    Someone in another section answered this. Thanks.

  • The message function on my Ipad just quit working.  I was using it while in Mexico and it just quit.  I have come home and synced my Ipad with Itunes and function still does not work.  How do I get this function to work again?

    The message function on my Ipad just quit working.  I was using it while in Mexico and it just quit.  I have come home and synced my Ipad with Itunes and function still does not work.  How do I get this function to work again?

    When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive.  It would be a few months old so it wouldn't have the complete library on it....any ideas?  I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

Maybe you are looking for

  • Handoff mail problems 8.0.2 and 10.10

    I am having problem with continuity/handoff and mail. When I start writing an Email on the iPhone and then handoff to the Mac, the Email opens after some time of a wheel is spinning next to "loading". Then I see what I had typed on the iPhone but I c

  • Do i need to buy anything besides a power converter to use my US ipad in europe?

    I am traveling abroad to Europe and bringing my iPad. They told us somethings would work like our cell phone chargers and computer chargers while others like blowdryers usually blow the socket. Do I need to buy some kind of special converter for my i

  • Brightness doesn't work in Windows 7 on Mini 210 HD

    Hi, I've bought a Mini 210 HD a month or two ago, and i promptly removed XP to put Windows 7 Ultimate (32-bit) on it. This has worked more or less OK, but ever since upgrading i have been unable to use the brightness functions of the lap-top in any w

  • Cannot scan to PDF in Adobe Reader XI

    IN adobe reader X there were many "Create" menu items, including Create PDF from Scanner -- now in Adobe Reader XI there is only Create PDF online and all the instructions as to how to scan give the directions for how it was done in Adobe X even tho

  • Master Page button hidden prob

    How can i make a button in a masterpage invisble?? The code should run from a Script Object. Hierarchy is :: testForm MasterPage Page1 resetButton MainPage Variables MyScripts MyScripts is a script object.. And i want to make the resetButton in Maste