Safari, Secure connection to sites, and Parental Control

I'm setting up Safari for a child, and have Parental Controls enabled and am customizing the list of sites that can be visited. I'm allowing Netflix.com and have multiple http and https Netflix URL's allowed. However, when I test accessing this site, Safari gives an error stating that it cannot establish a "secure connection".
The same computer, with a different account, can access the same URL without the error. My assumption would be that since I specifically allowed several Netflix.com URL's, that this would work just fine. By granting specific access, you are bypassing Parental Controls in a controlled way.
What's causing this to not work?
Thanks for your help.

Netflix only provides HTTPS when loggin in or visting the main site, not for the content or it would have to encrpyt the video stream (expensive).
It also sends one to another site (with another name "movies.netflix.com" here) to view the content, perhaps you have to access the account from another machine, grab the URL it directs you too and enter that into Parental Controls.
Silverlight also has to be updated, check your Flash too.
https://www.mozilla.org/en-US/plugincheck/
I did see the thread about using the IP address for HTTPS sites, but wouldn't there be a large number of IP addresses associated with a Netflix type of site due to all of the streaming video feeds available?
If that wouldn't be a problem, does anyone know how to determine the IP address of Netflix?
The video streams are not encrypted, and IP addresses are just the physical buildings of the servers themselves, the buisness name (URL) can change locations and that's what the Domain Name Server is used for to resolve those IP numbers for you in case they do change.
Netflix log in and content delivery have different IP addresses, the content delivery may use IP's of servers closer to your location, so it would not assist you for me to give those out.
You can install Firefox web browser and a add-on called FlagFox, which displays a little country flag in the URL address bar of each website you visit which you can right click and "Copy IP" if you so need it.
I don't advise using the IP, as that can change, use the URL so the Domain Name Server of your ISP can provide the correct IP address so your comptuer can connect.
Also Firefox has more add-ons for control and a nearly completely customizable web browser that may be a better choice for children/special needs (big buttons, type etc) than Safari.
There is Public Fox which can lock down certain aspects of the browser (prevent downloads for instance or changing things.)
Theme Font & Size Changer which can enlarge the type of Firefox itself, there is NoSquint which can auto-zoom all web pages etc.
There are Firefox Personas and Themes that can dress up or "childize" the browser so it's more fun for children.

Similar Messages

  • Any ideas for security and parental control software yet???

    Just received two of the touchpads from the fire sale and gave them to my kids, both under 10.  I am very interested in limiting the sites that can be accessed through the browser, as well as a few other things.  Has anyone found a practical means of doing this?  I'd hate to give up on this and switch it over to Android, especially since there is only Gingerbread available.  But, I just don't know what else I can do about these.  Any ideas? 
    Thanks!
    Post relates to: HP TouchPad (WiFi)

    Please take this post with a grain of salt. I don't claim to be a security and parental control software expert, but I have researched these solutions and have some personal experience with them. That being said, here's some ideas to get you started.
    As speedtouch mentioned, OpenDNS is a fantastic solution for website filtering. They have a great set of filters that can be customized and are one of the easiest systems to set up. Simply install an updater app on one of your desktop computers (or directly on your router if it's supported), configure your router to use their DNS servers, and you're good to go. I personally use this system mysefl and it works really well. The only downside in my experience is that there is not a temporary override system (at least, not in the free version that I use). An example of when this might be handy: my wife goes clothes shopping and looking at new bras. Every once in a while, a perfectly legitimate site might get blocked (in this case, probably something I don't want my kid looking at but perfectly fine for my wife). The option to "temporarily override the block" or "temporarily allow" the site would be nice, but it doesn't exist.
    Another FANTASTIC solution that I've used in the past is the Astaro Security Gateway. They have a free home version of their "Software Appliance" that goes above and beyond OpenDNS. I haven't used it in a while, but when I did it was able to not only filter web sites but also monitor Instant Messaging and other online activites. It's a bit more involved as you need your own hardware (I used an old computer with 2 network cards and stuck it in between my router and my broadband modem), but the results are pretty powerful.
    The downside to all these solutions, however, is that they will only work when the TouchPad is on your network. If they connect to a neighbors network of if the go to a friends house, all of these systems will be moot because they are completely bypassed. The only way to monitor that content from ANY network would be to install an application on the device itself and to my knowledge, none exist.

  • I started getting messages 3 days ago that my Safari cannot establish a secure connection to Facebook, and it will not open that website. It worked fine for years before this occurred 3 days ago, what can I do to fix it?

    I started getting messages 3 days ago that my Safari cannot establish a secure connection to Facebook, and it will not open that website. It worked fine for years before this occurred 3 days ago, what can I do to fix it?  OS 10.8.3, Safari 6.0.4

    From your Safari menu bar click Safari > Preferences then select the Privacy tab.
    Click:   Remove All Website Data
    Then delete the cache.
    Open a Finder window. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following
    ~/Library/Caches/com.apple.Safari/Cache.db
    Click Go then move the Cache.db file to the Trash.
    Quit and relaunch Safari to test.
    If nothing above helped, troubleshoot Safari extensions.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

  • I downloaded Macfee security and parental control.  The settings have gone back to basic settings but if I try to customise the toolbar by add the "home" icon or adding "contact" to bookmarks until I close and when I open they are gone. Any ideas

    I downloaded Macfee security and parental control.  The settings have gone back to basic settings but if I try to customise the toolbar by add the "home" icon or adding "contact" to bookmarks until I close and when I open they are gone. Any ideas

    Make that four.
    If you have any commercially advertised/available antivirus software installed on your Mac, completely uninstall this per the instructions on the AV developer's website.
    Antivirus software can slow down the normal operation of OS X and can negatively affect OS X performance and operation.
    Do you have apps like MacKeeper or any other maintenance apps like CleanMyMac 1 or 2, TuneUpMyMac or anything like these apps, installed on your Mac? These types of apps, while they appear to be helpful, can do too good a job of data "cleanup" causing the potential to do serious data corruption or data deletion and render a perfectly running OS completely dead and useless leaving you with a frozen, non-functional Mac.
    Plus, these type of apps aren't really necessary. They really aren't.
    There are manual methods to clear off unnecessary data off of your Mac that are safer and you have complete control over your Mac and not just leave a piece of auto cleaning software in charge of clearing off data off of your Mac.
    Their potential of causing OS X issues outweighs the implied good and benefits these types of hard drive or memory "cleaning" apps are written to do.
    Plus, the software companies that write these apps make it hard to easily uninstall these apps if something DOES go wrong and these apps work in a way where you have no recovery or revert function to return your Mac back to its former, working state in the event something does go wrong.
    It is best to never, EVER download and install these types of apps.
    The risk to your system and data is too great a risk!
    Search the web to learn how to correctly and properly uninstall these kinds of apps.
    They all uninstall differently.

  • Safari can't connect to server with parental controls on

    I have one user with admin rights and one user plus guest with parental controls turned on. Recently when parental controls are turned on, I get 'safari can't connect to server' error. When I turn parental controls off again I can connect to the internet again. Why is this?

    Hi and welcome....
    Unfortunately, Parental Controls can only be enabled on a non admin account.
    See if there's a proxy set up for Safari. From the Safari menu bar click Safari / Preferences then select the Advanced tab. Click "Change Settings" next to: Proxies.
    That will launch System Preferences / Network - Proxies.
    If there are any boxes checked under: Select a protocol to configure, deselect the box then click Ok.
    Quit Safari (Command + Q) then relaunch Safari.
    See if Safari can connect in a parental controlled user account.
    Carolyn

  • Safari "Can't connect to server" with parental controls enabled

    Safari says "Can't connect to server" when my childrens' accounts have parental controls enabled. Is there a way to enable parental controls on the administer's account??

    Hi and welcome....
    Unfortunately, Parental Controls can only be enabled on a non admin account.
    See if there's a proxy set up for Safari. From the Safari menu bar click Safari / Preferences then select the Advanced tab. Click "Change Settings" next to: Proxies.
    That will launch System Preferences / Network - Proxies.
    If there are any boxes checked under: Select a protocol to configure, deselect the box then click Ok.
    Quit Safari (Command + Q) then relaunch Safari.
    See if Safari can connect in a parental controlled user account.
    Carolyn

  • Websocket and parental control

    Hi all,
    It seems that receiving packets with websocket (http://en.wikipedia.org/wiki/WebSocket), for a user under parental control, is not possible.
    You can easily test this with a website like http://www.netscan.co
    A site like http://www.momio.me (not for me, for my 8-year old daughter ) depends heavily on the use of websocket.
    Is there any tweak that allows the full use of websocket, yet leave the user under parental control?
    Thanks in advance for any useful hint.
    Peter

    I think the Cisco connect is not working on your computer and you may need to reinstall the CIsco connect software.
    Did you try to change any wireless settings on the router using the Web based setup page of the router. Because if you change the wireless settings of the router using the Web interface then Cisco connect software will stop working and you will get the error message.
    You will need to reset the router and reconfigure it.
    Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router. Uninstall the Cisco connect software that you have installed before. Run the CD that comes with the router. It will install the Cisco connect software on your computer again.
    Once you are able to install the CIsco connect software successfully, you will be able to use the parental control feature.
    Do not change the Wireless network name and wireless security key using the Web based setup page of the router otherwise Cisco connect will stop working again.
    Use Cisco connect to change the the Wireless network name and password.
    If you do not want to use the Cisco connect then you can simply reset the router to factory default settings. Do not run the Cd and reconfigure the router using Web based setup page of the router.
    Open the setup page of the router and change the Internet connection settings manually and you will also find the Access restriction tab on the setup page.

  • Wrt1900AC and parental control

    Does anybody have parental control on Linksys Wrt1900AC working correctly?
    If so, please let me know how you did it?
    I spent 2+ hours with tech support and ended up replacing the router at their advise just to find out that the new one does EXACTLY the same thing - does not block specific sites, like youtube..
    Thank you
    .grig

    I hate do deviate from the original tread, but don't know how to separate them now  
    the device is showing up and disappearing from time to time. I know all IP addresses on my network - that's how i noticed unknown device. The fact that it show connected via port bothers me. I have all four ports in use by known devices and the unknown just show up making it five (wired connections) in the network map. The tech support told me that hubs, switches and network drives will not show on the map. I would say it's a glitch - but it's very consistent. It happened on two different routers and it always show the same IP.
    regarding blocking web sites on different computers - yes, I have tried. That's how I started - trying to block specific web sites on my son's computer and set up some time schedule. nothing works unfortunately. I don't know what else to try.

  • Suggestions/Wishlist: Favorites as Guide Default View, 16:9 Guide and Parental Controls

    Had FiOS installed less than a week ago after years as a DirecTV subscriber.  Overall very happy, but the Guide really needs work.  For starters, Guide Options should allow me to set the default view for the guide to include only a) channels I receive; or b) Favorites.  The latter allows me to filter channels I'll never watch from appearing in an already cluttered guide.  Constraining the guide display to 4:3 makes it look more cluttered and limits the amount of data that can be displayed -- a 16:9 view will be a lot easier on the eye as would the ability to suppress the color coding. 
    Parental Controls: When I unlock a channel, I should have the following options: Unlock This Channel Only or Unlock All Channels (this works nicely in conjunction with having only channels I receive included in the guide).  Unlocking all channels now requires too many steps. A timer feature would be nice as well.  DirecTV has a 4 hour option, at which point you are prompted to re-enter a password.  A better solution would be half-hour increments(e.g. Susie can watch TV for 30minutes after school, but not get sucked into 6 episodes of Hannah Montana...)
    I would appreciate any feedback on the foregoing.  FiOS is a great product -- just a few things to makeit even better.
    Chris

    16:9 guide was started (although it was just a stretched 4:3) but it had so many complaints that it was retracted. It is supposed to be coming in not the next upgrade but the one after that. (two upgrades out). It is going to be a true HD 16:9 guide, but it is still in production.
    There are ways with the Favorites. The link above is an excellent source.
    Same as JUSTIN about the parental controls, I dont need or use them so I have no experience with it.
    And just as an aside, this is a user to user forum, with next to no Verizon official presence. There are a few employees that float in and out and try to help, and I'm sure that some of them try and escalate the suggestions. But we have yet to get any kind of "official" site to make suggestions yet.
    ====================================================================================
    Error exists between keyboard and chair.

  • 10.5.2 and Parental Controls still broken

    When I enable 'Try to limit access automatically' under parental controls Safari blocks all web access. I would love the new features in Leopard if they actually worked as advertised. Anyone know of a way to correct this behavior?

    The only kernel panics I ever get are due to parental controls crashing. It's only happened once, yesterday, since installing 10.5.2 the day before. It used to happen in 10.5.1 about once a week. I was hoping .2 would have fixed the problem, but alas.... I can't seem to pin down the problem. On both accounts I have parental controls enabled for, I do so only to filter spam, so I have it set for unrestricted web access, mail limited, and ichat unlimited.

  • Want to use parental controls to prevent myself from being able to be on certain websites, but i can't do so on my account because i'm the administrator and parental controls don't work with the administrator. How can i do this?

    go on certain websites, but i can't use parental controls on my account because i'm the administrator. How do i prevent access to websites?

    Thanks for the reply, BUT --- i can't fool myself. I can make all the other accounts i want, but i'll still be able to get into the admin account and therefore have access to the websites i don't want to have access to. Is there a way to block websites from ALL accounts?

  • What is the best practice to connect 2 sites and replicate ADDS between 2 different sites using windows server 2012 r2?

    I found that there is new features remote access inside windows server 2012 r2 which is much more easier. Is there anybody can suggest me how to connect 2 different sites and it will be the tunnel to replicate ADDS (RW) between both sites.

    See this
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/133e7780-6a59-4bd7-906b-70830bea48d0/sites-connections-best-practice?forum=winserverDS
    Regards,
    Biswajit
    MCTS, MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, Enterprise Admin, ITIL F 2011
    Blog:
      Script Gallary:
      LinkedIn:
    Note: Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights..

  • Safari 4's Top Sites and Cover Flow is missing!

    So I downloaded the new Safari beta and tried it out. Top Sites and Cover Flow was missing and I couldn't find it anywhere. I installed the latest graphics driver for my computer but still no top sites. Ugh - THE PAIN!
    Specs: Windows XP Pro SP3, 75GB HD, 512 RAM, 96MB intel GRAPHICS.
    Please answer!!

    is your graphics card compatible with DirectX 9.0 and,
    also do you have DirectX 9.0?
    if you don't you need to get it, without CoverFlow and TopSite's don't work

  • Connection timeout on startup+parental controls?

    I've been having a problem with my computer. Whenever I log into my account and try to start the internet, it takes a few minutes for the internet to work; if I try to access a webpage prior to this indefinite span of time, the internet ends up timing out. The same thing happens with parental controls; everytime an HTTPS website is approved, it takes a few minutes for the internet to start working again. I am currently running OSX 10.9, if it heps clarify things. This problem only appears to be happening on my account; the internet works fine on my parents' accounts. Help?

    I've tried vchanging the service order, but that didn't work. What else can I do?

  • Sub account on my mac book pro and parental controls

    hi, I installed OS X 10.8.3 back in May (2013) and have upgraded as and when prompted. My son now has his own log-in on my MacBook.  All is fine but every now and then he gets windows popping up telling him what he is not authorised to use. The only way to avoid this is to remove parental controls but I do not want to do that.  As it is I find the parental controls quite inflexible as they don't allow much flexibility in how you set them.  But where I have blocked a couple of apps that he has no need to use, this pop up window keeps appearing which is really rather annoying.  Can anyone help?  They seem to be 'exterior' apps e.g. Kodak for the printer and Blackberry link.

    hi there.  I can see them popping up even before my son has chosen what he wants to open.  So I know he is not attempting to open them.  But I do agree with you about the fact they should not be popping up.  Even when you move them to a side they pop up again right in the middle of the screen.  What I have noticed the last two times though is that if I go into parental controls and tick and then untick these apps as items that my son can't access i.e. I give permission to use and then I uncancel that action before saving the settings by locking them, then they stop popping up.  And I did see on someone else's chat that they almost have to re-remind the computer of the parental controls for them to work properly (they had a different issue which was about the time allowed on the computer and how their kid could go over their specified 30 minutes).
    But I find the need to remind the computer of the parental controls absurd as I may be out when my son wants to use the mac book and I refuse to give him my password to fix it - noone gets my password otherwise there is no point having one.  I will wait and see if anyone else has a solution.
    Thanks for your post!

Maybe you are looking for

  • Does anyone know how to print a text message from a bill?

    Does anyone know how to print text messages from a phone bill or view them?

  • Total of calculated fields

    In a page-detail table report, there are several numeric fields which must be totalled at the end of the report. Some of the fields are calculated ones, i.e. a dollar amount multiplied by a conversion rate. The total of the calculated fields are alwa

  • Upgraded to Logic 7.2; own Digidesign mix plus...now what?

    Is anybody running a Logic 7.2-centered studio using something other than digidesign HD hardware? I'd love to hear about it! I'm at a turning point - THE most important tool to me is Logic Pro, but I've been using a Mix Plus system for a few years as

  • PL/SQL barcode function

    Hi, We need a free barcode function in PL/SQL. Can anyone provide this for us? Thanks in advance, Juliano Triska <[email protected]>

  • Next and Previous don't work with video in Playlists

    In iTunes for Windows 10.1.2.17, when playing video from a playlist, the video will end and the video window will close, and playback stops. No new video will play. The same thing occurs when clicking on the Next or Previous buttons (both on the vide