Safari slow to load page after loading 3/4 of the page normally

It seams like after the last Safari update a month or so ago is when this problem started. When I first open Safari and navigate to certain web pages (CNN.com and Facebook.com for example) the page will load about 3/4 of the way and then hang for about a minute or more. Mostly, it's the pictures on the page that aren't loaded yet. After about a minute or so, the page will either finish loading; sometimes with all the pictures loaded and sometimes with just a question marks in the space where the picture should have loaded.
I have used the Safari reset many of times and have restart the computer with no luck. Firefox works just fine with no issues. Anyone have any ideas?

Hello and Welcome to Apple Discussions ...
How much free space is on the boot disk? Right or control click the MacintoshHD icon on your Desktop, then click: Get Info. In the Get Info window, click the discovery triangle so it's facing down. You will see; Capacity and Available Make sure you have 10% available disk space, 15% is better. Insufficient disk space can cause the problems you are experiencing.
If it isn't disk space.. if you don't have a disk utility, try Onyx. It's free and available here:
http://www.titanium.free.fr/pgs2/english/download.html
Run the Maintenance and Cleaning scripts once a week.
Repair Disk Permissions. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select FirstAid, then click: Repair Disk Permissions. Quit DU when it's finished and reboot.
Carolyn

Similar Messages

Every time I use safari on my macbook pro with retina display, only half the page will load then it freezes up?

Every time I use safari on my macbook pro with retina display, only half the page will load then it freezes up? It's brand new, so I don't understand why it would be doing this?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

After I tap the d/load button, it say "safiri cannot open the page becasue the address is invalid"....

after I tap the d/load button, it say "safiri cannot open the page because the address is invalid"....
Location NZ

marel wrote:
OK, of course, but the fact is it WAS a valid address, one I've been to many times, but sometimes I get that message!
The address you provided, http://,k/ is not a valid address. It never worked and never will work. Valid addresses are of the form http://somedomainname.topleveldomain.
See the difference? Your address will never work. Once again clear your browser cahe and retype the correct address in the browsers address bar. At some point you likely incorrectlt typed http://,k/ into the address bar and that address is not cached in your browser.

Sites w/ .pdf or .ashx documents as the full page or as an insert in the page don't load the .pdf or .ashx documents - I get an Problem Report window that says "Firefox Plugin Process quit unexpectedly"

Sites w/ .pdf or .ashx documents as the full page or as an insert in the page don't load the .pdf or .ashx documents - I get an Problem Report window that says "Firefox Plugin Process quit unexpectedly" and sends the error to Apple so I have had to revert to Firefox 3 getting rid of 4. Anybody have any thoughts?? (I'm runnng OSX 10.6.7)
pdf was at
<http://www.brigham.com/MSDS/Dust%20Mop-dust%20cloth%20treatment.pdf>
ashx was my utility bill on
<www.pse.com>

OK, I think I have this solved. After reading my post over, I decided to rethink the problem. First thing I did was download Chrome and I tried using that and IE again and surprise! I was having the same problem on those browsers as well. So now we know it wasn't Firefox. I then figured maybe a slow computer meant a virus, so I ran scans. I've had both Avast and IOBit for months now and I've never had a problem with either of them before. Then I downloaded Malwarebytes and ran a third scan. They all picked some stuff up, but nothing serious. Then I tried disabling all the antivirus stuff and that didn't solve anything. But then I decided to keep Malwarebytes and I uninstalled IOBit Security and whammo - problem solved.
I have no idea why out of the blue IOBit would be causing a problem like this so if someone knows, please let me in on the secret. Additionally, IE was working fairly well last night but not this morning. I also don't know why removing IOBit would take care of the nsAppShell issue, because supposedly, that's related to Firefox plug ins. And one more thing...when Comcast hooked my neighbor up to cable, they did it by putting a splitter on my line. They were messing about with the lines yesterday before I got on my computer last night trying to decide how to rerun them and today they did that, taking the splitter off my line and giving my neighbor his own line. That was finished about 30 minutes before I uninstalled IOBit. So....who knows?
But I ain't about to look a gift horse in the mouth. I have my Firefox back and I am so sorry for bad mouthing you last night - I love you, Firefox!

Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens

Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens. I partitioned my hard drive and I tried installing Microsoft windows and that worked just fine. But I do not understand why it wont install mac os x 10.5????? PLEASE HELP ME. Thanks Hamid

Try a new post in the 10.5 Installation forum.
DALE

Project deleted in iPhoto 11 ver. 9.1.1 After spending three months building a twenty six page Book Project in iPhoto i added a page and later decided to delete the page. I selected the page, pressed the delete key and confirmed the delete dialog box ( i

Project deleted in iPhoto 11 ver. 9.1.1
After spending three months building a twenty six page Book Project in iPhoto i added a page and later decided to delete the page. I selected the page, pressed the delete key and confirmed the delete dialog box ( i didn't read, dummy) by pressing the delete button. The whole project was gone, the undo menu was grayed out and there was nothing in the iPhoto trash about my Book.
Surly I can find this if I knew the path to find the project in a library on a back column I have of my hard drive.. Could anyone help me?

Sorry I'm having a hard time getting this.
If I go to my hard drive BIGMAC>Library>Application Support>iPhoto>the only thing in this folder is Themes.
However, when I "Get Info" it's 580MB for 24,421 items. iPhoto says I have 35,977 photos. I would think the database would be into the GB for this many photos.
If I go to BIGMAC>system>Library>I find nothing about iPhoto
Is the iPhoto file in the Application Support the one I need to replace with my backup?
Thanks so much for your help.
Jack

When I'm on safari trying to put my email in for a sample the page keeps reloading and won't stop

When I'm on safari trying to put my email in for a sample the page keeps reloading and won't stop

Did you try a reset?
Restore?

Formerly I could download YouTube videos by double clicking the largest size page element in the Safari activity window address column. Now in V 5.0.5 page elements are not shown, just the page title, and under that about:blank. Suggestions? Thanks.

Formerly I could download YouTube videos by double clicking the largest size page element in the Safari activity window address column . Now in V 5.0.5 page elements are not shown, just the page title, and under that "about:blank". Also, the activity window used to show sequential activity and now each new page replaces the last. Thanks for any suggestions re how to restore previous activity window function.

Not all YouTube videos are available for downloading, but:
There is the Free iTube Grabber which can capture almost any audio and/or video stream (it says here) but only works with Intel Macs.
http://itube-grabber.en.softonic.com/mac
Firefox Download Helper is also supposed to work, you have to be logged into YouTube first.
and the RealPlayer Downloader that comes with RealPlayer SP for Mac from:
http://www.real.com/realplayer/mac
which also downloads videos from YouTube.
There is also iTubeX which allows you to download videos (Flash, HTML5 and others), .mp3 and .swf files from almost every website as easily as possible:
http://www.macupdate.com/info.php/id/27604/itubex
Lastly: How to download Flash videos and play them in Quicktime using Perian is explained here:
http://perian.org/#watch
It's the video at the bottom of the page.

Pop ups and ad pages that jump in front of the page I click on. I have blocked How to get rid of popups in Chrome and Safari as well as system preferences

I can't get rid of the annoying and time wasting pop ups and ad pages that jump in front of the page I click on. I have blocked popups in Chrome and Safari as well as system preferences

You most likely installed adware along with something else you recently installed.
You can either follow Apple's manual instructions for removing it, or the free automated tool, AdwareMedic.

Crystal Reports 9: Page Header plus Page Footer is too large for the page.

Hi,
I have a report that has the following sections.
GH1
GH2a
GH2b - has a sub report
GH2c - has another sub report
GH3
GH4
GH5
details - suppressed
GF5 - suppressed
GF4 - suppressed
GF3 - suppressed
GF2 - suppressed
GF1 - suppressed
The report works fine wehn I run it using Crystal Designer.I am using CR version 9.2.2.693.
When I try to load the report in my application, I get the following error.
Crystal Report Windows Forms Viewer
Page Header plus Page Footer is too large for the page.Error in File rptName.rpt:
Page header or footer longer than a page.
OK
There are no 'suppress blank sections' option set in the sections where the sub-Reports are.
I also tried setting the No Default Printer option.
The report gets loaded from the application only when I set 'New Page after' in the sections where there are sub-Reports.
I do not want to do this; Is there a workaround?
Thank you.

Can someone tell me if this problem is being worked on as it looks as thogh none of the problems regarding the message u2018Page Header plus Page Footer is too large for the pageu2019 have been addressed.
We have several reports that were written in Crystal 7 (I think) and worked in Crystal 9 and X1R2 but now give the above error. We have tried jigging the report in line with the various suggestions but at best can get them to run through successfully with one lot of data and then fail on the second or subsequent pages when you vary the data or report format even slightly. We can report on every bit of data separately or in various combinations but not in others. Changing the bottom page margin by 0.01 cm can cause it to fail on page 7 instead of page 530 (for example). We certainly do not have large page headers (just over 2cm) or page footers (about 0.3cm). We do have some subreports in the details section but have used 'fit to section', added 'keep together', removed u2018keep togetheru2019 from just about everything we can (in desperation) but to no avail. We cannot see a pattern to what is happening. It would be encouraging to know that someone is actually working on this fault.

Reader 11.0.0.1 An error exist on this page. Acrobat may not display the page correctly. Please cont

"An error exist on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem."
Any ideas how to get rid of this? Realistically its not practical to contact them, nor the other 1,000,000 web site owners whom host pdf's.
I really would like to disable the pop up only.
Seem to get it on quite a few PDF's. This web page seems to have quite a few that produce the problem.
http://www.2010.cannell.co.uk/manuals/manuals_porsche.html
click on the link to the pdf, scroll down a few pages and it pops up.
I do not get the error when using reader 10, only the new 11.0.0.1 version.

Hi Pat,
No problem withthe link you supplied.
This is one that has the problem "948 Cayenne Owners Manual - 2008 - Turbo" http://www.2010.cannell.co.uk/manuals/manuals_porsche.html
Just FYI, I look after 8000 clients, have the same problem on 3 of my test machines.
All windows 7, 64 bit IE9 fully patched.
Using 32 bit IE
Testing prior to upgrade from 10 to 11

How do I add page numbers to my document without the page numbers automatically changing. I do not want the page numbers the software automatically places into my document.

How do I add page numbers to my document without the page numbers automatically changing? The title page is blank, I can type in 1 on the 1st typed page, but the #1 automatically goes into the next page and will not change.

Click at bottom of the first page:
Menu > Insert > Section break
Click somewhere in the 2nd page (not the header/footer)
Inspector > Layout > Section > Page Numbers > Start at 1 > Configuration > uncheck use previous headers and footers
Click into the header or footer of the second page:
Menu > Insert > Auto Page Numbers…
If there is anything in the header or footer on the first page that you don't want just select it and delete it.
If you really wanted to manual place page numbers on each page you will have to use a section break between each and every page. I can't imagine that would be useful.
Peter

Print Problem - PDF is OK on Windows 7, but OK on Windows XP with "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem."

I have received a PDF which prints fine in Windows 7 but with Windows XP I get "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem." and a blank piece of paper passes through the printer. I appreciate that Windows XP is no longer supported but I would like to think that the solution to this problem is not too difficult!
I have tried Acrobat 9, 10 and 11.
Any advice (apart from use Windows 7! ) would be most welcome.
Many thanks.

If you use the same Adobe Reader versions with the same PDF on Windows 7 and XP, then I would expect the outcome to be the same.
Is this a local or online PDF?
If local, is the file really exactly the same?
If online, in what browser?

Error in Acrobat 8: An error exists on this page. Acrobat may not display the page correctly...?

Hi,
We perform the e-signing on any PDF using our custom e-signature plug-in. Once that's done, when we try re-opening the PDF in Acrobat version 8.0.0.0, we get the following error:-
"An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem"
Please note that this error occurs intermittently and is NOT observed in Acrobat 7 or 9. Also, when a plain PDF is opened (i.e. a PDF without any signature on it) then there is NO error.
Could you let me know what could be the issue here? I read it in Acrobat 8.1.3 release notes that such an error was a known bug in version 8.0.0.0 (http://kb2.adobe.com/cps/407/kb407016.html), but I am not sure of its cause.
Let me know your comments/suggestions.
Thanks!

I am getting the same error even in Acrobat version 8.1.3.
Additionally, I noticed that if we click on menu ‘Advanced->Sign&Certify->Preview Document’, then we get a notification as “This document is not PDF/SigQ compliant and may display inconsistently”. On clicking ‘View report’ on that notification, the below dialog pops up. It has errors listed as:-
Code 4000 : Unrecognized PDF content. The document contains PDF content or custom content not supported by the current version of Acrobat.
Code 4002: PDF content contains erros.
However, if we sign the PDF using default adobe signature functionality and reopen that PDF, the error does NOT come and the notification also says ‘This document is PDF/SigQ compliant’.
Can anybody please suggest what could be missing in the custom sign that we apply? Is it because of any of the missing fonts or any other resources?
Awaiting reply!
Regards.

I'm in a multi-page document, how can i rearrange the pages or insert blank pages in front of pages? Also, is there a way to show the ruler both horizontally and vertically?

I'm in a multi-page Pages document, how can i rearrange the pages or insert blank pages in front of pages? Also, is there a way to show the ruler both horizontally and vertically?

Not on my document. I have a 7 page document open. The "flashing vertical bar" is at the top of page 3. I have the thumbnail view showing. I click page break and two blank pages are added to the end of my document. I have to scrool thru the pages to see that the 2 pages were added as they do not appear in the layout view... I'm not sure if it is inserting a "section" as it adds two blank pages.. But I am clicking on "INSERT PAGE BREAK".. So guess there are still a lot of bugs to fix..
Thanks again

My i-tunes Wish List only shows the first page, it used to show all the pages- like the next page button is disconnected?

My i-tunes Wish List only shows the first page- it used to show all the pages. Its a little like the next page button is disconnected?
Any ideas?
thanks
Simon

I would say all types. Any kind of document/ file that has multiple pages, I can't get to the next page.

Safari slow to load page after loading 3/4 of the page normally

Similar Messages

Maybe you are looking for