Safari still freezes when accessability voice over is on and blue tooth keyboard still doesnt work when accessability voice over is on, Help

Hi Apple,
iphone 5s latest updates , safari still freezes when accessability voice over is on and blue tooth keyboard still doesnt work when accessability voice over is on, Help

Hi,
If you are absolutely sure that neither the sound output of the Macbook nor the sound output of VoiceOver are muted then try to reset VoiceOver.
1. Open VoiceOver Preferences.
2. From the File menu choose "Reset All VoiceOver Preferences …".
3. Click "Reset.
4. Turn VoiceOver Off and On again. (hold command and press F5 twice).
If you still don't hear anything then it could be that the main sound output of the Macbook got muted somehow. I find that I often hit the mute button on my Apple wireless keyboard without noticing. So just make sure that its not muted and also hit the "Volume Up" a few times. Its so terribly obvious I know but its also very easy to miss. Lots of people do that.

Similar Messages

A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port. WHen we plugged it into the port on the keyboard, the device works. Why?

A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port. When we plugged it into the port on the keyboard, the device works. Why? Obviously the device is operational. Could the USB port have burned out from having too much power drawn? If so, is it reparable?

It can't draw "too much" power, it can only draw as much as the USB port is able to provide and no more. IIRC, the keyboard port has a lower power output than the iMac's port.
That being said, yea, it's possible that the port has failed and it can be replaced or if another port works you can use that one. Although if it is still under warranty or covered by Apple Care, then I would take it to an Apple Store or service provider to get the port repaired.

I am unable to apply my downloaded update. When I try to apply it and restart firefox, it still says 'apply downloaded update now...'. Why can't I apply this update and what do I do about it?

I am unable to apply my downloaded update. When I try to apply it and restart firefox, it still says 'apply downloaded update now...'. Why can't I apply this update and what do I do about it?

Checked out that link and everything seems to be in order on this machine at this time.
I only have CC installed on this one machine, not even my secondary machine like is permitted. it seems odd that I'm asked to re-accept the Licence Agreement as often as I am. If I had to guess, it's almost every week, if not multiple times some weeks, that all the software will decide I should have to view the licence agreement.
Edit: I've never had any noticeable "errors" activating or anything like that. I just get asked to do it quite frequently.
This activation screen isn't too annoying (it involves clicking one single button), but like I stated earlier, if I'm trying to launch the software by double-clicking on a PSD, AI, PPROJ, AEP, etc... that file will fail to open.
I feel like that's probably not really a bug, but it is frustrating, since I did launch the application with the intent to edit that specific file I tried to open.
Again, something that you guys may consider working on.
Another annoyance is that: agreeing to the licence agreement is a per-application task, so if I see that Licence Agreement dialogue window by opening Photoshop (for example), I know that every other piece of software I have in the suite (Illustrator, Premiere, After Effects, Audition) will be showing me that screen on it's next launch. Probably deliberate for legal purposes that I can't just agree once for the whole suite, but heck, it would save me a lot of minor headaches if it was a unified agreement.

Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

You are referring to a feature called Clamshell Mode, please read Clamshell Mode setup for instructions.
BTW when posting when you use generalities such as "have tried everything" this tells us nothing. When posting please be specific and try to paint a complete picture. It just makes things easier for those trying to help you.

Iphone 4 Blue tooth phone and itoons audio over stereo mini plug Blue tooth freaks out when I use both any Ideas???

error message comes up and blue tooth freeks out
Any ideas hoew to get bluetooth phone and use music out put at the same time?

Hello,
Do you know the error message? it's a good idea when you receive an error message to include them in the forum it will allow us to better help you. So to get a better understanding of your problem you are attempting listen to music via bluetooth as well as use a hands free device?

My time capsule doesnt work when its conneted direct cable modem, and it start working from netgear router

I just bought a Airport Time Capsule, time capsule is connected direct from wan to cable modem (it doesnt work). when i connect it to lan port 1, it start working. normal process i know is from cable modem to wan port. 2nd i notice, network is on bridge mode. so my question is how do i make it to work from modem to wan port.

What model is the modem? Is it a pure cable modem or a combined modem router?
This maybe important as the current model TC does have issues with some of the popular cable modems.. SB6121 or 6141 being often the ones complained about here.
If it is a pure cable modem (most will have just one ethernet port). Then power down the modem for 20min. This allows enough time for the MAC address of the first device connected to be lost at the ISP end so it is ready for a new router.
The TC must be in dhcp and nat mode.
Please factory reset the TC and start over.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
By default the TC is in router mode after a reset.
Restart the modem.
The power up the TC and run through the setup utility.
The TC should then be accepted as the main router in the network.
If this fails check the WAN ip address. If it is 10.x.x.x or some other private IP you did not turn off the cable modem for long enough.. Try again only this time leave it off longer. (Some ISP it is just 5min.. some 15.. some will require 60min or overnight).

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt available anymore in the plugin list. Tried to reinstall everything for a few times, but nothing helps.

When I search for updates the raw converter doesnt get update automaticly. Frustrating, is costing me the whole morning.

I am trying to move a picture that I brought over from iWeb and it is locked. I need to move it. Can anyone help?

I am trying to move a picture that I brought over from iWeb and it is locked. I need to move it. Can anyone help?

It is probaly just "inline" ie part of the text.
click on it > Inspector > Wrap > Floating
Peter

Just upgraded to Mavericks and my HP6100 printer no longer works, when I try to reload the software it says PowerPC apps no longer supported. Is there a way to use my HP6100 Printer with Mavericks?

Just upgraded my 2009 iMac (3.06 Ghz, core 2 duo $GB 1067 Mhz DDR3) to Mavericks OSX 10.9.5 and my HP6100 printer no longer works, when I try to reload the software it says PowerPC apps no longer supported. Printer says the software was improperly installed. Is there a way to use my HP6100 Printer with Mavericks or do I need to go back to Mountain Lion or Snow Leopard?

It's not clear whether your printer is included in the Apple list - there is an Officejet 6100 and a couple of other types. Go to the page linked to above and use the browser search for 6100.
I'm afraid HP are notorious for not supporting older printers - I had the same problem. Probably they hope you will buy another printer (I did, but it was a Canon). I did look on HP's site and couldn't see a driver - you could give it a try (make sure you have the exactly correct printer name):
http://www8.hp.com/uk/en/support-search.html?tab=1#/qryterm=HP6100&search_search type=s-002
Alternatively ou could try Gutenprint (open source software):
http://gimp-print.sourceforge.net/MacOSX.php
I found it would indeed drive the printer, but the colour dithering wasn't very satisfactory and the duplex printing bolt-on wouldn't work. However as Gutenprint is free it's worth trying to see if it's any good for you.

Itunes error message "file cannot be found..." I know the file is somewhere since I find it when I do a system search and it plays, but can't get itunes to see it. Any help?

itunes error message "file cannot be found..." I know the file is somewhere since I find it when I do a system search and it plays, but can't get itunes to see it. Any help?

Hello pwithero,
The following article details the process of indicating to iTunes the correct location for the affected file.
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Cheers,
Allen

HT1766 hi, i just tried backing up my iphone on icloud but th option to 'Back Up Now" doesnt work. when i tap on it, nothing happens. Im worried because my iPhone has never been backed up before

hi, i just tried backing up my iphone on icloud but th option to 'Back Up Now" doesnt work. when i tap on it, nothing happens. Im worried because my iPhone has never been backed up before. Please help

Reset the phone then try it again: hold down the home button along with the sleep/wake button until you see the apple, then let go.

Why this path doesnt work when there is "!DOCTYPE" element?

Hi, I need to extract contents from an xml file, which looks like
<hr />
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//ES//DTD journal article DTD version 5.0.1//EN//XML" "xyz501.dtd" > 
<article docsubtype="fla">
<item-info>
<jid>YANBE</jid>
<aid>12941</aid>
</item-info>
</article>
<hr />
And I have tested with this path "//article/item-info/jid/text()", but it doesnt give me anything. But I noticed that when I remove line 1, it does extract the content "YANBE"...
why the path doesnt work when there is that DOCYTYPE element? How should I get around with this please?
Many thanks!

The extract of XML you gave is not valid (Line 1: <hr/>) but besides that ... I think your problem is in the DTD.
Somewhere in the DTD it probably 'sneakily' defines a default attribute which in reality is a default-namespace for one of the elements. This means that in your XPath handling, you will have to map a prefix to a namespace-uri (NamespaceContext [1]) and use this newly defined prefix in your XPath expression.
//tst:article/tst:item-info/tst:jid/text()[1] http://java.sun.com/j2se/1.5.0/docs/api/javax/xml/namespace/NamespaceContext.html

Having problem with my iphone camera,doesnt work when i click the camera app,but it does work when i double click when my phone is off.

having problem with my iphone camera,doesnt work when i click the camera app,but when i double click when my phone is locked it works.

The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

I have an iphone 4s and the speaker has stpped working when I play music with i tunes or you fox. It works when they ring me but not when i want to listen to music :( do you know how I fix this?

I have an iphone 4s and the speaker has stpped working when I play music with i tunes or you fox. It works when they ring me but not when i want to listen to music :( do you know how I fix this?

Go to settings/music/volume limit tap on that. Make sure it is set to OFF and when you tap it that the slider is at max

My iPhone 4 is 3 years old, and recently the Flash will only work WHEN it wants to... Anyone got any ideas what I need to do?

My iPhone 4 is 3 years old, and recently the Flash will only work WHEN it wants to... Anyone got any ideas what I need to do? Does it need to be repaird in an Apple store? if so does anyone know roughly how much it would be? Or would a simple Restore work?
Thank you in advance for replies

Take it to an Apple store. Most likely you will have to get a replacement for which you will be charged the replacement fee.
Rice only absorbs water. But it cannot prevent damage to the device.

Safari still freezes when accessability voice over is on and blue tooth keyboard still doesnt work when accessability voice over is on, Help

Similar Messages

Maybe you are looking for