Safari stops opening pages
Hi all,
I encountered the following problem recently:
Safari works and opens web pages as it should, but only for 3-4 minutes or so. After that, while it does stay responsive, it will not open any new pages, almost like it is not connected to the internet. It just shows "Contacting www.example.com" in the status bar, and nothing happens; at the same time the processor activity increases rapidly (as I may judge by the fan noise which becomes louder, as it always happens on a mac like mine in case). At this point I can close tabs, but I cannot quit Safari - it quits only via Force quit command.
My attempts to isolate the problem showed that it is likely linked to the following line appearing in system.log (just before Safari stops working):
May 28 22:04:58 iMac-G5 Safari[356]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Resetting Safari or installing all updates did not help. Any ideas are very appreciated; maybe there is something else I can reset or try to delete.
Thanks!
This is exactly what has been happening on my G3. So far I have been using Camino or OmniWeb because I have not been able to find an answer. Camino is slow to load some pages like Facebook which use a lot of Flash and Omniweb has a memory leak (but it's OK for an hour or so). I wonder if this only happens on Power PC Macs or if Safari 3.2.3 has this problem on Intel Macs as well?
Similar Messages
-
Safari randomly stops opening pages
Hi Everyone,
Since upgrading to Yosemite, Safari randomly stops opening pages. It works for a while, then if I put my computer to sleep, sometimes when I wake my computer, Safari will no longer opens pages. When this happens, all apps requiring internet are affected including Firefox and Chrome which no longer work, as well as mail and iMessage.
They only way to get it to work again is to reboot my computer - sometimes I need to do this several times.
I have deleted Safari preferences to no avail.
Can anyone suggest a solution?
Thanks
TB1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' /\.framework$/&&!/\/Contents\// { n++;print;} END { if(n<400) print "/System/";} ' ' { gsub(/[()"]/,"",$3);print $3;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i 'kMDItemContentType=com.apple.framework|sort' -name\ kMDItem${p[35]} );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Frameworks );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B4 4 22 69;A1 24 56 32;B7 22;B2 23;A4 39 57 70 23;B2 24;B6 23 24 4;C3 58;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Since recently upgrading safari and of course the OS to Mountain LIon, I have discovered a quite serious bug.
Randomly safari stops scrolling pages. This has so far happened 3 times in the last week or so. You can open/close/view pages, but even though the scrollbar is present it won't scroll. I cannot use my mouse wheel, or click in the scrollbar or use the space bar, page down key or even search the web page to force it move down.
The site I visit doesn't initiate the issue, it can be any website. The issue appears to be quite random, the only way to fix the issues is to close the browser and start it again.
I have currently 2 extensions running in Safari, Ultimate statusbar and Awesome screen grab., I am going to proceed to remove both to test if this fixes the problem.
However this is very frustrating as this has never been a problem in other version of Safari to date. I had to complete this question in Google Chrome, as of course I couldn't scroll to tee bottom of the page in safari!Try resetting and clearing the cache more often.
From your Safari menu bar click Safari > Reset Safari
Select: Clear History (also empties the cache)
Deselect the remaining boxes then click Reset.
If that didn't help, open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy / paste: ~/Library/Caches/com.apple.Safari
Click Go then move the Cache.db file from the com.apple.Safari folder to the Trash.
Quit and relaunch Safari to test. -
when I open my safari it will no longer go directly to my yahoo home page, says.. Safari cannot open page because too many redirects accured, how do I fix this.
Clear the cache in Safari and have another try
Cheers! -
Ipad 1st gen. Safari cannot open page because address is invalid. I get this trying to download apps from itunes, infact it will do this under any variable. I have tried copy paste in url but it doesn't matter what i try, safari doesnt allow anyway i try. I have searched answers to this but to no avail.
LeighHi Demo,
Yes, I have not made myself clear, I apologise.
I have tried downloading apps from itunes in order to set up a game for my son, when I go to click on a link, be this in itunes, or on the web, Safari revolts back informing the address is invalid. I read by coping a link and pasting into the URL, this would do it, but not so.
My goal then, is to install Minecraft for my son, I would then download an app to allow this but I am unable to get this far due to Safari insulting the address I ask it to go to
The iPad is first generation
OS 5.1.1 Software up to date.
Thank you in advance for your time -
How to solve problem - " Safari cannot open page because it isn't connected to the internet" but the airport is ok. signal full and i have n IP address. and i m using Macbook pro.
OS snow leopard and above...Do you have this problem with all websites, or only some? If only some, which ones?
-
I have the iPad basic first edition. For some reason my app store app is missing. On my games when I tried to update the apps I get a message that says safari cannot open page because address is invalid, but this happens even when I click directly on the prompt message that comes up when loading game. Also, it seems that my app store app has been deleted? I don't know how to get it back. When I try to download it I get the same safari message as afore mentioned.
Swipe to seethe farthest home screen to the left. Type in App Store in the search box and see if the app may have been accidentally placed into a folder with another app.
You cannot download apps using Safari. -
I keep getting a message "safari cannot open page [page name with header information] because you are not connected to the internet. Then I check CNN for a time stamp, and I am connected to the internet. I have reset everything suggested in other posts, ensured any other device that could be hogging bandwidth is off, the router is reset, the iPad is reset. The other devices are not having this problem, and it happens on both places I use the iPad, the university library, (getting a second degree after a change in a long time career and at home. Any insight into this issue would be appreciated.
Saing yu tried everthing provides little information to us. We do not know what you tied.
Have you tried:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Powering off and then back on your router- Resetting network setting: Settings>General>Reset>Reset Network Settings
The toubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
- Does you iPod conenct to other networks?
- Do other devices connect to your network? -
Why does safari stop opening web pages after a while in use?
Since upgrading to Lion, my imac (Intel) 21.5 works fine for most of the time, but frequently when using Safari to browse the internet, it will stop accessing pages, either from new searches or from history - the blue loading bar in the address panel starts, then stops. Safari itself keeps working, new tabs can be opened, history can be checked, etc. Checking the Wi-Fi shows that it is still connected, and other PCs and ipods in the house can still access the net, showing it is not a net or router problem. Restarting the machine does not usually cure the issue, only shutting down for a long period, eg overnight, when it generally starts up fine again.
This has been happening almost since I upgraded 2 months ago, but not every time we use Safari.You can do some basic Safari trouble shooting by:
Safari - Reset Safari
Safari - Empty Cache
You can also be just low on RAM. As a general rule your system should have about 500MB or more of FREE RAM. To check to see how much your system has open Activity Monitor - System Memory Tab and look for the amount of free RAM. You can find AM in Applications - Utilities - Activity Monitor. Remember to check when you are seeing a slow down otherwise the information will be meaningless. The graphic will look similar to: -
Safari prefs open Pages in Tabs "Always" not working??
For some reason Safari "open pages in tabs"+"always" setting has just stopped working. Tabs can be created by opt-clicking, or from within the tab menu bar but NOT by clicking on a link in a page - which it used to. I have deleted Safari plist and cache but no luck. I have made numerous changes in the prefs menu and saved and reset and relaunched Safari but it does not work. I used to be able to open every link into a new tab just by clicking but this has just stopped happening and there was no new software added to Safari. Restart of machine does not help either. Any clues? Thanks and cheers! Sam
Reinstalling the same version of Safari would have no effect. What I'm asking is whether there was a change in the behavior of the same version (not the same copy.) If there was, please link to a page that exhibits the change and specify exactly what it is.
It's normal for Safari not to open all links in a new window, regardless of settings. The effect of that setting is to open pages in a new window when the page code calls for them to open in a new tab. That's all. -
why do I get an error message when I start safari 5.1 telling me I need to open browser in 32 bit mode in order to "view movie" ? This occurs when I start safari on the opening page (the page with all the boxes for most viewed web sites). This had never occurred with safari up until the latest updates to safari & OSX [Version 5.1 (6534.50)] and OSX 10.6.8.
also, I'm not trying to view a movie - this occurs for the page previews that load when safari opens.
thanks.go here:
http://get.adobe.com/shockwave/otherversions/
choose "different version">full 64 bit and download - seems to have solved probem...let you know if it happens again -
Safari cannot open page and seems like Apple doesnt cares :(
Translate please...
Sering dan sangat sulit untuk membuka website mengunakan ipad dengan jaringan 3G. Dan sepertinya ipad sangat lemah dalam masalah koneksi.. Saya mengunakan jaringan 3G,dan saya rasa tidak ada masalah dengan provider saya. ( XL )
Saya coba menggunakan kartu ini dengan modem AT&T dan windows7. Semuanya berjalan dengan lancar walau speed tidak terlalu cepat,50kbps,saya rasa ini cukup bagus kalau hanya untuk browsing
Saya juga sudah membaca posting yang ada tentang ini dan sepertinya tidak ada jawaban yang memuaskan. Apakah solusinya cuma dengan restart? Saya coba.. Dan tidak ada perubahan juga. Terus saya harus bagaimana lagi??
Beberapa orang menyarankan menggunakan wifi tetapi saya sulit untuk mendapatkannya,itu sebabnya saya membeli ipad 3G.
Saya juga mengalami kesulitan untuk mengirim email yang berisi beberapa foto. Selalu gagal ketika proses sudah berjalan setengah.
Kenapa untuk region indonesia saya tidak bisa membeli album lagu??
Saya membeli ipad ini dengan perbandingan 60% untuk bermain game 40% browsing. Tetapi saya mengalami kesulitan dalam hal browsing.
Dan saya membutuhkan waktu 30 menit hanya untuk masuk ke apple support communities
Karena selalu..... CANNOT OPEN PAGE,SAFARI CANNOT OPEN THE PAGE BECOUSE THE SERVER CANNOT BE FOUND.Have you considered the server the website is on is down or your dns is configured improperly? Talk to you isp about the proper dns servers. As far as the server down what do you want apple to do?
-
Safari keep open page from cache, though the origin page has been available
This is weird. Safari keep opening a site with this error message:
501 Method Not Implemented
Method Not Implemented
GET to /indexfr.php not supported.
But when i'm opening the site with Firefox or Opera, the website displayed correctly. Even when i'm using curl/wget from Terminal, all html codes are displayed correctly. I know that about 1 month ago, all browser displayed the same (firefox, safari, opera, curl) 501 method not implemented. But after the remote site has been recovered, Firefox can correctly display the web page, while safari can't. It seemed that safari keep displaying the cached page.
I've tried empty the cache (from menu) many times, tried to push SHIFTCOMMANDR, tried to delete cache folder (~/Library/Cache/Safari), and also i've upgraded my safari to Safari 3 beta. All didn't work.
IMHO, when the remote site responded with 501 HTTP response, safari keep caching 'the http response', and i don't know how to delete it. This is very annoying since i have to switch to Firefox to browse that only site.
FYI: The remote site has more than one IP addresses, maybe i got this response from one of them. So, is it possible that safari keep caching the IP Address? and not to use round-robin behaviour? But i don't think so, because when i edited /etc/hosts to manually assign that site to one of the IP address, Safari still displayed 501 error message.
So, my main question is, how to completely start over Safari just like if we buy a new computer?
Sorry for my bad english
Powerbook G4 1.3 12' Mac OS X (10.4.10)Ok, i've tried to put a question mark at the end of the url, but still got 501 Method not implemented.
I'm sure that my ISP doesn't cache web pages. Because when i tried with curl or wget (from command line), i got full html code. It is ok to browse the site with Firefox and Opera. And when i set my http proxy to our ISP's proxy, i can browse that site !!!
Here i provide some screenshots, please click:
Firefox OK, Safari Don't
Safari Don't ok. Proxy off. and my ISP doesn't do transparent caching.
Safari Don't ok. curl is fine!
Powerbook G4 1.3 12' Mac OS X (10.4.10)
Powerbook G4 1.3 12' Mac OS X (10.4.10) -
After installing Yosemite, Safari cannot open server webmail page : 'server unexpectedly dropped the connection". However emails coming to Mail ok.
HI,
From the Safari Menu Bar click Safari/Empty Cache...
Restart your Mac and see if Safari loads with your home page.
If not, go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop.
Now go to Safari/Preferences - General. Set your home page and restart your Mac. If it works as it should, move the .plist file to the Trash.
Carolyn -
What is this please help!! Safari cannot open page because the address is invalid? Please help
How do I fix this please Safari cannot open the page because the address is invalid..... Please help
Make sure the address of the page you are trying to open is correct. What page are you trying to open?
Maybe you are looking for
-
Macbook Pro Retina Display hard crashes - not caused by Google Chrome
Hi, all. This is my first time posting on these forums, and it is only due to the unsurpassed amount of frustration I have had with my mbpr. I received it in late August, and it worked great. Yes, I had the waking from sleep problem, but that got fix
-
Question about packages from AUR that get into [community]
just noticed that powerpill is out of the AUR and into [community] (yeah!). My question: since I installed powerpill and its two deps from the AUR, should I uninstall the versions that I built from the AUR then install from the repo or doesn't it ma
-
trial period has run out? please enter your serial number? And paying 49.99 a month? hours on the phone with tech support... hours chatting, and nobody knows how to fix this? Once and for all? I can't spend hours uninstalling and cleaning and re-inst
-
I lost my i pad while in my tour how to protect my content in i pad
i lost my i pad while in my tour how to protect content in i pad
-
Camera Raw CS6 produces damaged files when doing greyscale conversion
When attempting to save to JPEG from CS6 Camera Raw for Nikon NEF files (with the greyscale conversion checkbox checked), the resulting images are damaged: red hue output with scattered noise. See: https://picasaweb.google.com/lh/photo/duJSMbdMd5VZLS