Safari Sync with MacBook Pro and other IOS5 products

I want my MacBook Pro to have the same book marks as my iPhone and iPad in Safari.  How do I accomplish that?

The possible fix for the "this accessory is not compatible" is to carefully clean the dock port with isopropyll alcohol especially the pins which are on top of the mid rib. Be firm but do not break anything. Let it dry for a minute. See if that helps, if not try to clean one more time. If problems persist might need to Visit Apple.

Similar Messages

  • My iPhone 4 has crashed.  i tunes will not recognize it and I can't restore it.  I sync with macbook pro and all software is up to date.  no anti-virus applications/software are on my macbook.  any ideas?

    my iphone 4g has crashed.  itunes doesn't seem to recognize it and wil not let me restore it.  i have updated all software and there are no anti-virus apps/software on the macbook that this phone syncs with.  i do get an error message on the phone that says something like the accessory is not compatible but I have no accessory for the phone other than the apple chargers and ear buds.  any thoughts? 

    The possible fix for the "this accessory is not compatible" is to carefully clean the dock port with isopropyll alcohol especially the pins which are on top of the mid rib. Be firm but do not break anything. Let it dry for a minute. See if that helps, if not try to clean one more time. If problems persist might need to Visit Apple.

  • How can I have one thing open in Safari on my MacBook Pro and search for another thing in Safari without closing out of the other? For instance, How can I leave Pandora playing while I search Facebook?

    How can I have one thing open in Safari on my MacBook Pro and search for another thing in Safari without closing out of the other? For instance, How can I leave Pandora playing while I search Facebook?

    With Safari open use the Command + T keyboard shortcut to open a new tab.
    Or, Command + N to open a new window.

  • What to do if black berry bold 9900 contacts not fully syncing with macbook pro?

    what to do if black berry bold 9900 contacts not fully syncing with macbook pro?

    thanks for the advice
    I have an I phone 4S that is having almost the same problem, and only some of the newly added contact of the phone are added to the address book, so not a big difference, and its not a solution to get read of all products only because we use apple.

  • I'm listening to iheartradio through safari on my macbook pro, and two seconds into each song it freezes up and won't play

    I'm listening to iheartradio through safari on my macbook pro, and two seconds into each song it freezes up and wont play the rest of the song.

    This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
    Here's the link for the safeboot
    http://support.apple.com/kb/HT1564?viewlocale=nl_nl

  • Screen stuck on gray, used shift key and my screen appears with MacBook Pro and not the recovery option. Please help

    Screen stuck on gray, used shift key and my screen appears with MacBook Pro and not the recovery option. Please help!

    Hi ..
    Shift key boots into Safe Mode, not Recovery.
    This only works on a Mac running v10.7 Lion or later.
    Startup your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities to repair the startup disk and restore OS X using OS X Recovery
    If you can't boot into Recovery Mode, help here >   Mac OS X: Gray screen appears during startup

  • Hearing conflicting reports. What camcorders work best with macbook pro  and imovie

    I am looking to purchase a new HD Camcorder, but Im told some of them dont work well with macbook pro and Imovie.
    Im in the process of buying a new iMac and want to make sure I will be able to load the movies direrct to imovie.
    Thanks.

    This forum is for mobile iMovie (iPads & iPhones).
    you may need the iMovie Mac forum:
    https://discussions.apple.com/community/ilife/imovie

  • Unable to sync with MacBook Pro even after installing Po...

    Unable to sync with MacBook Pro even after installing PocketMac

    why don't you post the same thing again (since you posted it 3 times already)?
    perhaps whole you're at it you could post some useful information to get advice like Mac OS, Device, Device OS, other sync software installed...
    4.6.1.305 hybrid
    Mac Pro 2X2.8 Quad SL

  • How to turn off home share in original iPad? Want to stop it syncing with pod, phone and other ipad.

    How to turn off home share in original iPad? Want to stop it syncing with pod, phone and other ipad.

    Home share got nothing to do with sync. Figure out which one you want off and come back.

  • IPad Notes and ipad_keynotes not syncing with MacBook Pro purchased versions of iWorks 2009 ?

    I downloaded Notes and Keynotes for my newly purchased iPad2 and tried setting the iTunes sync to share documents for the Notes between my MacBook Pro and the new IPad2. To my surprise the pop up indicated that it could not accept documents 2009 version?

    Got it to work today. Apple care said it may have had something to do with a version upgrade yesterday for Snow Leapard. All I know is I'm pleased to see it working.

  • Problem with Macbook pro and Airport Express!!!

    I'm having the same problem I have seen others with right now with my macbook pro and my airport express. I have set up and reconfigured the A.Express 3 times now. I have the green light, i have the Ethernet configured, I have full bars of reception but I cannot access the signal. meaning I can not go online even though everything is set up correctly and says that it's good to go. Anybody have any advice?
    Is it an issue with having to re access the network I created with the Airport utility?
    It worked the first time I configured the A. Express with my macbook pro no problem. Then suddenly my computer was just not getting internet. Even though all the settings were ok and I was even getting full bars reception from the device on my comp. So I reset the A.Express and have been having the problem mentioned above since that point. Please help me if you have any advice. Thanks so much in advance.

    I had the same problem, and to test if I was connected launched Safari and Safari after a few seconds of not connecting, it shows you a dialog box, with options to follow up, I follow the dialog box and like magic I am connected to the Internet.

  • How can I restore data from my iPhone after sync with macbook pro?

    I accidentally syncronized my Iphone with MacBook Pro on iTunes and lost all data from my phone (calendar, contacts, photos, etc.). Is there a way to recover that information? Thank you!

    Welcome to Apple Support Communities
    You cannot. However, you can solve this problem by setting the iPhone as a new device and upgrading iOS in Settings -> Software Update.
    After upgrading iOS, open Settings -> General -> Reset -> Erase All Content and Settings. Finally, Setup Assistant will let you restore the backup.

  • Issues with MacBook Pro and Asus VW266H

    I own a 2.4 GHz 15 inch MacBook Pro,and an Asus VW266H (external monitor) that I wanted to connect to my Mac via VGA,since the DVI is connected to my desktop computer.So I went ahead and purchased Apple's MiniDisplay Port to VGA adapter,and connected my Mac to my display.At first,the Mac didn't recognize the display with its name and would only go up to a resolution of 1920x1080(while the maximum resolution of the display is 1920x1200). I restarted the Mac with the display plugged in,and once the laptop booted up,the resolution was 1920x1200 and the display was recognized, but immediately quite a lot of trembling was noticeable.When the display wasn't detected properly(as an Asus VW266H) this problem wasn't present. I'm guessing that this is a compatibility issue,which by the way wasn't fixed by the latest EFI update by Apple,which improved external display compatibility. Does anyone have any idea if the problem might be something else other than lack of compatibility and/or how to fix it?
    I know that neither the adapter nor the VGA cable have a problem since I connected the computer to my 1080p TV and it worked just fine...

    Concerning this comment:
    I know that neither the adapter nor the VGA cable have a problem since I connected the computer to my 1080p TV and it worked just fine...
    I would like to point out that 1080p has a lower pixel clock than will 1920 x 1200. So it could be the stability problem is only present when the pixel clock is at the high end of the range.
    You could return the adapter and try another. A new one might have better margins. Another thing you could try is to use a utility like SwitchResX to lower the pixel clock and see if stability improves.

  • What surveillance camera and software are compatible with MacBook Pro and Mtn Lion?

    Hello,
    I want to know what wireless camera is compatible with my 2012 MacBook Pro and OSX 10.8 Mtn Lion?  I want to RECORD surveillance video.
    Also, can you recomend video recording software?
    Thanks!
    Newbie
    Message was edited by: newbies88

    You can get a replacemnt from http://eshop.macsales.com/
    Allan

  • Wireless Router issues with MacBook Pro and Windows XP laptops

    hello,
    I have a d-link wireless router and I have a MacBook Pro and a Windows XP laptops. My issue is that I have to keep rebooting either the router or the modem (which I both replaced) and it still does not work right. Now can mac and windows work simultaneously through a wireless router (d-link) with no issues?

    My problem is that every time I log off either computer, and when I start it back up up again I have to reconfigure all over again for both laptops to get connected to the internet. I called the d-link people and they pretty much said if i still had problem to go their web sites and download their firmware (which I have that version) so I am running out of options because I just can't turn either of them on with out reconfiguring it. Now I am using WPA on them. Could that be the issue? But right now I do not know. This is my first mac and I am getting a little irritated by this. Overall I like the mac except for this little issue. Does that help?

Maybe you are looking for

  • IPod restarts every time I click the center button

    Every time I click the center button to go into the music folder, my iPod restarts, so I can't get into those files. It sometimes happens when going in to the extras folder as well. What do I do?!

  • Need Video Capture Card and DVD Burner Quick!

    Here's my situation. I've created some movie titles in iMovie and have no way to get them from my Macintosh to my DVD/VCR to incorporate them in a tape I'm making. I need it like NOW as a lot of people are waiting for copies of the tape! For some tim

  • Ipod nano 2nd gen. 8 gb

    Is this flash unit or hard drive? I want to get a flash drive unit with more memory than 4gb for my son who had an ipod mini and broke the internal hard drive 3 x. I called apple and some woman said it was not flash drive in the 8gb. But, some descri

  • Rebate Activation for Customer

    Hi Gurus, For Rebate functionality as per standard it is required to activate the payer master record of the Customer for Rebate functionality. In our case Customer X has a payer as Y. Is it sufficient if i activate Y for rebate functionality Or it i

  • Outlook connectivity and mail flow issue on Exchange 2010 3 node DAG

    Hi, I have 3 node DAG, 2 (NODE A, NODE B) in Production site and 1(NODE C) in DR site. but just 1 AD Site. when I have the active databases on NODE B, everything works fine. no issues to report. but when I move the databases on NODE A, outlook gets c