Safari Toolbar mail icon doesn't work

I added the mail icon to my safari toolbar from the customization menu but I don't know how to connect it to mail. Ideally it would just open my gmail and school mail websites within safari. Anyone know how to make this happen?

Hello b:
Are you using the Apple Mail application? I believe the icon is a pointer to that application.
Barry

Similar Messages

  • Mail icon doesn't work??

    I recently downloaded iOS 6.1. My mail no longer loads when I click on the icon. A white screen comes up for a few seconds and it shuts down. I have tried everything. I have tried to delete my mail accounts but they won't delete. They just come back. I have also tried to reset and restart my iPad. Nothing will work. I need to use my mail accounts. It's so frustrating. I don't know what else I can try. I am using an iPad 2.

    Did you close tha mail app in the recents tray? If you quit mail completely and if you have rebooted the iPad with no success, this might be worth a try.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
    It takes some time to get everything set up again, your privacy settings, brightness and wallpaper, Safari settings, turning Siri on again, reenter your network password, etc. .... But you can do much of that as you go along.

  • I m not able to browse safari and mail icon is not working?

    I m not able to browse safari. My email icon is not functioning at all, so I can not see any email like yahoo, hotmail, gmail. Page is completly blank.
    thank you for your support.

    Did your 4S have Facetime on it before you updated? The 4S, new, shipped with Facetime and didn't need and update to iOS 6 to get it. However, if you purchased an iPhone that was designated to be sold in UAE, Saudi Arabia and a couple of other Middle Eastern countries, then the device does not have FaceTime and it can't be added.

  • Safari show all tabs doesn't work all the time

    It is annoying: safari show all tabs doesn't work all the time. The little icon to the right of the "New Tab" area sometimes works, and sometimes doesn't. The Shift Command Back-slash, sometimes works, and sometimes doesn't. I find no rhyme nor reason for this. I have a MacBook Pro, Mountain Lion, the latest updates. It doesn't matter if I am in Full Screen or not.
    I am quite confused regarding this.

    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type of copy paste the following:
    ~/Library/Caches/com.apple.Safari/Cache.db
    Click Go then move the Cache.db file to the Trash.
    Quit and relaunch Safari to test.
    If that helped, empty the cache more often from your keyboard.
    Command + Option + E

  • This morning I cannot open the mail Icon. It worked last night. What happened?

    This morning I cannot open the mail Icon. It worked last night.

    I'd first recommend restarting your computer before taking the steps below.
    Click the Finder icon on the left side of the Dock to open a new Finder window (if no new window appears, select New Finder Window from Finder's File menu).
    Select Applications from the left sidebar.
    Locate Mail inside of Applications and double-click the icon to launch Mail.
    If this doesn't work, could you provide some more information as to how you're opening the application and what you're seeing?

  • Safari and mail icons disappear

    The Safari and Mail icons keep disappearing from the dock on my iMac. I've dragged them back from the Applications folder, and they disappear again within seconds. If I open the applications from the Apllications Folder, the icons appear on the right side of the dock. Then, as soon as I close the applications the icons disappear. I've deleted the dock preferences file, and i"ve also disabled dock synching from Mobile Me, but nothing seems to work. Any suggestions ?

    Have you checked all your homescreens and app folders for them, and do they show on the iPad's spotlight search screen (swipe your first homescreen to the right and type in Safari or Mail) ?
    Safari can be hidden via Settings > General > Restrictions > Safari being 'off', so you could check that as well.
    If you still can't find then try a reset and see if you can find them after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot
    There is also Settings > General > Reset > Reset Home Screen Layout which will reset the layout of your apps and might make it easier to find them.

  • I lost my safari and mail icons.  How can I get them back in the screen?

    I lost my safari and mail icons on the ipad screen.  How can I get them back or where can I find them?

    Have you checked all your homescreens and app folders for them, and do they show on the iPad's spotlight search screen (swipe your first homescreen to the right and type in Safari or Mail) ?
    Safari can be hidden via Settings > General > Restrictions > Safari being 'off', so you could check that as well.
    If you still can't find then try a reset and see if you can find them after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot
    There is also Settings > General > Reset > Reset Home Screen Layout which will reset the layout of your apps and might make it easier to find them.

  • Mail server doesn't work after upgrading from SL to ML

    My Mail server doesn't work after upgrading from SL to ML
    Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
    the problem seems to be related with dovecot ... in my smtp log i get this:
    relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
    I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
    Any Ideas?
    Cheers
    Carlo
    This is my postconf -n info:
    server:Data admin$ postconf -n
    biff = no
    command_directory = /usr/sbin
    config_directory = /Library/Server/Mail/Config/postfix
    content_filter = smtp-amavis:[127.0.0.1]:10024
    daemon_directory = /usr/libexec/postfix
    data_directory = /Library/Server/Mail/Data/mta
    debug_peer_level = 2
    debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
    dovecot_destination_recipient_limit = 1
    enable_server_options = yes
    header_checks = pcre:/etc/postfix/custom_header_checks
    html_directory = /usr/share/doc/postfix/html
    imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
    inet_interfaces = all
    inet_protocols = ipv4
    mail_owner = _postfix
    mailbox_size_limit = 0
    mailbox_transport =
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    maps_rbl_domains =
    message_size_limit = 20971520
    mydestination = $myhostname, localhost.$mydomain, localhost
    mydomain = moremoremore.it
    mydomain_fallback = localhost
    myhostname = server.moremoremore.it
    mynetworks = 127.0.0.0/8,192.168.178.0/24
    newaliases_path = /usr/bin/newaliases
    queue_directory = /Library/Server/Mail/Data/spool
    readme_directory = /usr/share/doc/postfix
    recipient_delimiter = +
    relayhost = mail.mclink.it
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = _postdrop
    smtp_sasl_auth_enable = no
    smtp_sasl_password_maps =
    smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
    smtpd_enforce_tls = no
    smtpd_helo_required = yes
    smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
    smtpd_pw_server_security_options = cram-md5,gssapi
    smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
    smtpd_sasl_auth_enable = yes
    smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
    smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
    smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
    smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
    smtpd_use_pw_server = yes
    smtpd_use_tls = yes
    tls_random_source = dev:/dev/urandom
    unknown_local_recipient_reject_code = 550
    virtual_alias_maps =
    server:Data admin$

    if this could help:
    mail:setStateVersion = 1
    mail:readWriteSettingsVersion = 1
    mail:connectionCount = 11
    mail:servicePortsRestrictionInfo = _empty_array
    mail:protocolsArray:_array_index:0:status = "ON"
    mail:protocolsArray:_array_index:0:kind = "INCOMING"
    mail:protocolsArray:_array_index:0:protocol = "IMAP"
    mail:protocolsArray:_array_index:0:state = "RUNNING"
    mail:protocolsArray:_array_index:0:error = ""
    mail:protocolsArray:_array_index:1:status = "ON"
    mail:protocolsArray:_array_index:1:kind = "INCOMING"
    mail:protocolsArray:_array_index:1:protocol = "POP3"
    mail:protocolsArray:_array_index:1:state = "RUNNING"
    mail:protocolsArray:_array_index:1:error = ""
    mail:protocolsArray:_array_index:2:status = "ON"
    mail:protocolsArray:_array_index:2:kind = "INCOMING"
    mail:protocolsArray:_array_index:2:protocol = "SMTP"
    mail:protocolsArray:_array_index:2:state = "RUNNING"
    mail:protocolsArray:_array_index:2:error = ""
    mail:protocolsArray:_array_index:3:status = "ON"
    mail:protocolsArray:_array_index:3:kind = "OUTGOING"
    mail:protocolsArray:_array_index:3:protocol = "SMTP"
    mail:protocolsArray:_array_index:3:state = "RUNNING"
    mail:protocolsArray:_array_index:3:error = ""
    mail:protocolsArray:_array_index:4:status = "OFF"
    mail:protocolsArray:_array_index:4:kind = "INCOMING"
    mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
    mail:protocolsArray:_array_index:4:state = "STOPPED"
    mail:protocolsArray:_array_index:4:error = ""
    mail:protocolsArray:_array_index:5:status = "OFF"
    mail:protocolsArray:_array_index:5:kind = "INCOMING"
    mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
    mail:protocolsArray:_array_index:5:state = "STOPPED"
    mail:protocolsArray:_array_index:5:error = ""
    mail:startedTime = "2013-01-21 21:18:32 +0000"
    mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:SMTP Log = "/var/log/mail.log"
    mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
    mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
    mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
    mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
    mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
    mail:servicePortsAreRestricted = "NO"
    mail:state = "RUNNING"
    mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

  • Mail app doesn't work

    Mail app doesn't work after Yosemite OSX upgrade. At first it didn't check email and now it doesn't boot. I tried many times, but nothing happens

    Ok after nearly going crazy I read something about someone having a problem with a program related to fonts not being installed. I started up font book and now my problem is miraculously resolved... This is good and bad. I don't know why having font book running would resolve my problem or know what font is causing the programs not to work. As far as I know I didn't disable any system fonts. And the problem doesn't happen when font book is running, which is confusing me.

  • Safari copy url button doesn't work

    I just upgraded from an ipad2 to an iPad air 2. Before, if I wanted to copy and paste a url I'd use the copy button. Now,on the new iPad air 2, the copy button just wipes out whatever I've previously copied, and doesn't copy the url.

    You tap and hold down in the URL field until you get the option to select all. Then you choose the option to select all. An option to Copy appears and you select that and then you should be able to paste that URL into a text field.
    Safari copy url button doesn't work
    I Realize that you must know the steps but I am just double checking. If that is not working for you, and you are not having copy and paste issues elsewhere in other apps, I would try clearing Safari, force close it and then reset your iPad.
    Go to Settings>Safari>Clear History and Website Data
    Now force close Safari. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Installed but icon doesn't work

    When I click on the smart web printing icon it tells me I have to update.  A message comes back that version 6.4 is already installed.  But the Icon doesn't work and takes me back to installing again. 
    Photosmart c410
    Windows Vista
    Dell

    Not haapen for me !!!

  • My "sent mail " tone doesn't work. All other tones do work.   I've changed tones and rebooted. Still silent

    "sent mail" tone doesn't work. All other tones do. What to do?
    ILive changed tones and rebooted

    Hi Gwing17,
    Welcome to the Apple Support Communities!
    I understand that all of your iPhone sounds are working as expected except for the Sent Mail sound. I understand that you have already changed the Sent Mail sound as well as reset your iPhone and the issue persists. In this situation, to isolate the issue, I would first recommend backing up your iPhone to either iTunes or iCloud.
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
    After you have backed up, I would recommend restoring your iPhone and setting it up as new to test the Sent Mail sound. If the sound works as expected, try restoring from your backup and test the sound again. Please let me know if the issue returns or if the sound still does not work when you set up your iPhone as a new device.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Cheers,
    Joe

  • My screen is frozen on Safari. Hard rebot doesn't work. Shutting do ne doesn't work either.

    My screen is frozen on Safari. Hard rebot doesn't work. Shutting done doesn't help. What can I do?

    Try Force Quitting Safari. You can access Force Quit either by clicking the Apple symbol in the upper right and choosing Force Quit or keyboard shortcut of Command - Option - Esc.

  • My mail icon is not working after update ios 6.1.1 ????

    dear sir please give me soluction.
    my mail icon is not working after update of ios 6.1.1

    You can only purchase apps and other media for the county's sore in which yu are located. You account, included payment method, also must be associated with that country.
    Sam applies for updating apps. Note that not all apps are available in all country so y will not be able to update an app if you are in another country and that app is not available in that country or your account is not associated with that country.
    You can change the country and other things by:
    iOS: Changing the signed-in iTunes Store Apple ID account

  • TS3899 I have an iphone5 and the reply, forward and writing a message from the mail app doesn't work. I can check my mail but can't reply to it. What's going on?

    I have an iphone5 and the reply, forward and writing a message from the mail app doesn't work. I can check my mail but can't reply to it. What's going on?

    Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)

Maybe you are looking for

  • Customer contact functionality not working as expected

    Good day, i'm new here, just joined today because of this problem i'm having. I created a Promise-to-Pay on 18.07.2011 to be paid on 28.07.2011 The problem is that it still appears in the Open Items Worklist when i run udm_supervisor under the specif

  • Multiple Plant Material Master

    Hi, Following is the business scenario: The client has two plants: one is excise exempt and other is not. Same material is manufactured in both plants. They also have a registered sales office which is created as a depot in SAP. Profit centers are cr

  • Loading Datagrams with XML SQL Ulitility

    I am trying to exercise the following command from Steve's book Chapter 12. java OracleXML putXML -user xmlbook/xmlbook -filename out.xml newsstory I get a class not found error. Can you tell me where I can find the OracleXML in the PATH assuming I h

  • Grey scren after MacBook Pro Update 2.0

    I downloaded the last update but my Mac is still With a grey screen 1 hour after the restart... so... what can i do ?

  • Data Pump export complete schema

    Hi , can anyone please help me when i am trying the export the database schema with datapump api i have created directory before executing this block i am getting following errors ora-31634 job already exists ora 06512 sys.DBMS_SYS_ERROR ora 06512 sy