Safari upgrade crashed my iBook - can't start the computer anymore!

After the latest Safari upgrade, all I get is a blue screen when I start my iBook.
I've tried holding down the option key while restarting to be able to select the hard drive and then boot, but that didn't work. All I get is a blue screen or a grey one with the Apple in the middle.
The upgrade worked just fine on my new iMac, so it is not a network problem.
Any ideas?

Sorry not to get back to you sooner. I was out all day.
I noticed in your original post that you mentioned an iMac. Do you have a Firewire cable? (I think it is a 6 pin to 6 pin that you need). If yes, make sure the iBook is turned off. Attach the firewire to both machines and start up the iBook holding down the 'T' key. This should put you into Target Disc Mode, and your HD will appear on the iMac's Desktop. You can then open Disk Utility on the iMac, select the iBook's HD, and try to repair it this way. Disk Utility is located in the Applications Folder, under Utilities. THe next thing I can think of trying, if the above does not work, is to reset the PMU. It may not help, but it shouldn't hurt, either. For instructions on how to do this go here:
http://support.apple.com/kb/HT1431?viewlocale=en_US
Hope some of this helps.
Susan.
Message was edited by: Susan M

Similar Messages

  • Safari 4.0 upgrade crashed my iBook - can't start the computer anymore!

    Hello!
    After the latest Safari 4.0 upgrade my iBook doesn't start anymore.
    I've tried holding down the option key while restarting to be able to select the hard drive and then boot, but that didn't work. Also a safe boot didn't do anything. I finally connected the iBook to my iMac via Firewire and used Disk Utilities to try to repair the iBook's HD. Unfortunately it got a 'repair failed' message. Then I got the spinning wheel, Disk Utilities stopped responding and I couldn't close it.
    The last thing I tried was the 'fsck' command on the apple website and tried it. This is what I got:
    localhost:/ root# /sbin/fsck -fy
    ** /dev/rdisk0s3
    ** Root file system
    ** Checking HFS Plus volume.
    ** Checking Extents Overflow file.
    ** Checking Catalog file.
    disk0s3: I/0 error.
    Invalid sibling link
    (4, 253)
    ** Volume check failed.
    Does anybody know how I can fix my iBook?
    Thanks,
    Julia

    Thanks for hanging in there with me. I had hoped the discs would work since I can't find mine.
    I connected the iBook to my iMac via Firewire and used Disk Utilities to try to repair the iBook's HD. Unfortunately it got a 'repair failed' message. Then I got the spinning wheel, Disk Utilities stopped responding and I couldn't do anything on the iMac. When I tried again I couldn't eject and had to shut down the power again. Not good.
    The technician at the local MacHouse thinks that the iBook already had a problem and the upgrade brought it out. Does that sound plausible to you? I never noticed any problem, it worked just fine. I am hesitant to upgrade anything now on my iMac.
    I am going to try to find the right discs and will try an install and archive or install and erase.
    Is there anything else I can try in FireWire mode?

  • Installed 10.4.8 updater, now I can't start the computer

    I just ran the 10.4.8 updater through the auto software updater control panel. After the install/restart I shut down for the night. When I came back later to restart I got as far as the loading screen and it just stalled with the multicolor spinning wheel. I let it go for at least 5 mintues but nothing happened. So I restarted again then got a an empty black box in the middle of the screen. I don't seem to be able to get a successful startup now. How can I get out of this? Can I somehow get back to 10.4.7? I would really prefer to not have to reinstall all the software leading up to 10.4.7...
    I am using a G4 1Ghz 17" Laptop.

    You can select the main folder that contains all the other data folders then press COMMAND-I to open the Get Info window. In Ownership and Permissions section set the desired privileges then click on the "Apply to enclosed items" button. This will change all the files and folders within the main folder to the desired privileges.
    You can avoid problems like these in the future by practicing some basic housekeeping.
    Kappy's Personal Suggestions for OS X Maintenance
    For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.0 is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.2 is Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. The current version, 1.5.1, is Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.
    OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
    I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
    For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is significant):
    1. Retrospect Desktop (Commercial - not yet universal binary)
    2. Synchronize! Pro X (Commercial)
    3. Synk (Backup, Standard, or Pro)
    4. Deja Vu (Shareware)
    5. Carbon Copy Cloner (Freeware - not universal binary.)
    6. LaCie SilverKeeper (Freeware - not universal binary)
    7. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
    The following utilities can also be used for backup, but cannot create bootable clones:
    1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
    2. Toast
    3. Impression
    Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
    Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at www.versiontracker.com and www.macupdate.com.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Can't start the computer

    i shut down the computer last night in a normal way. didn't notice any problem, except my computer run a bit slow when i am surfing in internet. the color wheel appeared from time to time, and i couldn't do anything for a minute.
    this morning i wanted to start up the computer, but it stopped at the grey screen with the apple logo and the turning wheel. and that's all. then nothing happened. can anyone give me some advice how to tackle this problem? i checked with the disk utility tool (by starting up with the system DVD and hold pressed C), and the tool said that the harddisk seems to be totally alright.

    i've tried the safe mode. first i saw the apple icon and the spinning gear, and then the apple icon changed to a forbidden sign. seems like hopeless. would like very much to know whether there is any chance to get files out of the harddisk. though i backed up with time machine all the time, i've got some problem with the external harddisk so i disconnected it for a few days and get it repaired. didn't back up the documents for the last 5 days. any hope?

  • I can't start the computer after idle state

    after idle state or sleep time i can`t start any programm

    Which OS is installed? You posted in the Mavericks forum but it does help to have have information in your profile.

  • The app Goodnotes 3 keeps crashing and I can't save the files anymore

    Hi,
    I have the app goodnotes 3 but today I changed to another folder inside the app and now it crashes as soon as I open it, so that I am not able to safe my Documents or export them to itunes. I am pretty despreate because there is a pretty important document inside the app that I can't access anymore now. I have tried restarting the app and the ipad but that doesn't seem to change anything.
    Would it be possible to make a backup of the ipad and restore it? Or do I loose the documents inside the app ?
    Greets Nick

    Hello
    When you back up your device using iTunes or iCloud, the application data is saved. You can try the back up and restore to resolve your issue with the app itself crashing on you.
    iTunes: About iOS backups
    http://support.apple.com/kb/ht4946
    iCloud: iCloud storage and backup overview
    http://support.apple.com/kb/PH12519
    iOS: Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/ts1702
    Regards,
    -Norm G.

  • I did an upgrade and now i can't get the bookmarks back in Safari like they used to be

    I did an upgrade and now i can't get the bookmarks back in Safari like they used to be. How can I get contacts back in the bookmarks. Also, why does Apple always change everything? Very frustrating.

    Unforunately, not that I know of.
    Apple - Safari - Feedback

  • HT4623 Hello I upgraded my iPhone to version 6.1 and the device does Hfalhsl iPhone and it stuck on can not start the iPhone

    Hello I upgraded my iPhone to version 6.1 and the device does Hfalhsl iPhone and it stuck on can not start the iPhone

    Find an answer somewhere else or buy a new phone.
    You can not get help here for a hacked/jailbroken phone.

  • Hello I upgraded my iPhone to version 6.1 and the device does Hfalhsl iPhone and it stuck on can not start the iPhone

    Hello I upgraded my iPhone to version 6.1 and the device does Hfalhsl iPhone and it stuck on can not start the iPhone

    Find an answer somewhere else or buy a new phone.
    You can not get help here for a hacked/jailbroken phone.

  • I can't start the iBook, please help!

    I have got an iBook G4, that I buyed in July 2005; yesterday I've tryed to start the computer but I can't!
    I push the start button, there's the normal sound and in the screen the normal white page with the apple...but the iBook doesn't enter in the operative system!!!
    What can I do??
    Must I format the computer?
    Must I call the assistance?
    Please, help me! It's very important!

    Hi Lucia and Welcome to Discussions.
    Don't worry, it's not time to format yet!
    The first thing to try is to see if your iBook will start in Safe Mode.
    If your iBook is on, turn it off.
    Press the power button and immediately you hear the start-up chime press and hold the shift ⇧ key. Keep holding the shift key until you see the rotating pin wheel. Release the shift key. Allow the iBook to finish starting up. This will take a lot longer. Log in at the prompt.
    If the iBook has successfully started up in Safe Mode then restart in the usual way without holding the shift key. Safe Boot runs diagnostic and repair functions that may fix the problem without doing anything else.
    If your iBook won't restart normally then do another Safe Boot as described above. Then from a finder window locate the following folders:
    /Library/StartupItems and /System/Library/StartupItems and drag any third party items onto the desktop.
    Restart the iBook in the usual way, without holding the shift key.
    If the iBook starts normally then you know there is an issue with one of the third party start up items that you were using at start up.
    If the iBook won't restart normally then do another Safe Boot as described above.
    Open System Preferences>Accounts>log in items, select any log in items in the window & remove them by clicking on the - sign at the bottom of the window.
    Restart your iBook in the usual way without holding the shift key.
    See if that works and post back with the results.
    Best of luck.
    Adrian
    ibook G4 1GHz, 768mb; iMac 17" G4:768mb (10.3.9)   Mac OS X (10.4.6)   Belkin WiFi F5D7632

  • I have all my music on an external media drive that has crashed. How can I get the music of my ipod touch back onto the comupter without loosing the music when it syncs?

    I have all my music on an external media drive that has crashed. How can I get the music of my ipod touch back onto the comupter without loosing the music when it syncs. in order to start rebuilding my music collection?

    You should be able to recover the media with the tips in  this post from forum regular Zevoneer but I'm not sure what the implications are for your application settings. You can probably transfer your purchases into a newly authorised library, backup the device, recover any other media using third party tools, then restore the device from the backup. That should switch the assocation of the device to the new library but it is not something I've personally tested.
    When you get it all working, make a backup!
    tt2

  • Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

    Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
    In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
    I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

    We're sorry.
    We can't find the article you're looking for.
    Please return to the Apple Support homepage.
    Sigh.

  • I have Mac OS 10.6.8 and Safari 5.1.10. Can I update the OS and the browser?

    I have Mac OS 10.6.8 and Safari 5.1.10. Can I update the OS and the browser?
    thanks for your help

    Safari 5.1.10 is the latest version for OS X 10.6.8.
    If you meet the minimum requirements, you can upgrade to OS X 10.9 (Mavericks) for free. Mavericks comes with Safari 7
    To install Mavericks, you need one of these Macs:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later),
    MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    Your Mac also needs:
    OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
    2 GB or more of memory
    8 GB or more of available space

  • My PC crashed and I can't find the download email to use in my new PC. Ideas?

    I bought & downloaded Adobe XI. My PC crashed and I can't find the download email to use in my new PC. Ideas?

    Sorry, I meant to say it was....I just don't understand what I'm doing wrong and I hate their support pages or lack thereof!!! I just want to install my stinking Adobe Acrobat XI that I bought in 2013...I got the serial number from my account.  If XI doesn't exist anymore, is Adobe DC what replaces it? How do I upgrade with my serial number? Do I have to pay anything? I don't do anything fancy with Adobe, I just open pdf, print or convert to word. Any help!!!!???

  • Error "can not start the configuration in parallel does not correct"

    Hello everybody,
    I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
    Thanks in advance!

    Check this KB
                  1678498  - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error

Maybe you are looking for

  • Can't open Project Professional 2013 projects in SharePoint 2013

    I can't open Project 2013 documents from SharePoint2013.  My environment is:  Project Professional 2013 32 bit Office Professional 2013 32 bit IE 9 32 bit Windows 7 Enterprise 64 bit All other documents (Word, Excel) can be checked out and edited fro

  • SAP SD return sales order

    Hi , Say, we have a return sales order and subsequent documents( returns delivery, reversed goods issue and credit memo) for a particular sales order. if we again try to create a return sales order for the same sales order,currently,SAP gives informa

  • System messages related to Invoice Verification

    Hi Experts, Could you please explain when system will issue below four messages during MIRO (Invoice verification) transaction. M8   286   Different invoicing party & planned in purchase order & E E M8   287   Different invoicing party & planned for

  • Setting DBMS_METADATA.GET_DDL Output for Materialized Views

    Hi all. My Oracle version is 10g. I'm extracting the DDL of all the objects from database using the DBMS_METADATA package. I'm using SET_TRANSFORM_PARAM to configure the output because I need a simple sql code, without information about tablespaces,

  • Stocks discrepancy at year end

    Hello. We created an STO to tranfer the Natural Gas from one co.code to another one. Created an outbbound delivery. On March 31, 2009 - Goods receipt done against this delivery (by mistake user selected the stock in inspection rather than unrestricte