Safari v5.0.2 for Win7 (64-bit) crashes with Kraken benchmark

my Safari v5.0.2 for Win7 (64-bit) keeps crashing whenever I try the Kraken JavaScript Benchmark http://krakenbenchmark.mozilla.com

Thank you for your response. Yes, you are right to suggest upgrade to 10.4 of course, but I've read stories of how it is slower, especially since I only have 256 MB on my iBook G4.
Sorry to say, but good news all the same for others in my situation, that the new browser Camino 1.6.4 is the best solution to this problem.
I installed Camino on my 10.3.9 and it works great, faster than Safari, better features, about the same feel and functionality, and completely stable with no crashes regardless of which web site I visit, keeping Javascript enabled. (I also tried FIrefox and it crashed on the same sites as Safari.)
So, all you users who still insist on their 10.3.9 OS, switch to Camino and experience crash-free browsing!

Similar Messages

Drivers/Utilities CD..XP and VISTA..can I use vista for WIN7 64 bit install?

Drivers/Utilities CD's, that came with the p-35 Motherboard..XP and VISTA..can I use Vista for WIN7 64 bit install, or download the chip set drivers for Awin7 BEFORE the OS install??
MSI P-35 Platinum
Q6600 Core 2 Quad
Presently XP 32Bit
NVidia geforce 8600GT
8GB DDR2 SDRAM PC6400-800MHz
Windows 7..waiting to be installed.
Hello,
I WANT TO DO A CLEAN INSTALL.I have Windows 32 Home XP, I have the Win7 OEM I want to install.
When i bought my MSI mobo, it came with both the drivers and utilities for XP and Vista. Can I use the chip set drivers and utilities for Vista, until i can go to MSI and download the latest chip set drivers? When do i install these drivers....before the OS install, or after?
Can I format these drives first, go in the BIOS change to boot sequence from Raptor Boot Drive to the DVD/Rom to boot the WIN7 from, or should I format while installing Win7?
Someone on another forum suggested that 1) disconnect the two droves, then install the OS on the boot drive, and2) before win7 install, make the proposed boot drive (NOT THE DVD/CD ROM the first choice priority for the boot sequence....is this right?
Is it absolutely necessary to unplug the other two drives, while formatting and installing the WIN7 O.S.? People tell me that there is a chance of the OS installing sometimes on the other drives.
Also, if I want to change the now present boot drive Local disk letter (C) to my storage drive (G) and the other two drive letters, can I do this in manage disks, anytime, or only during windows setup install?
Thx

I've never had this much trouble hooking up a HDD.
I have two IDE DVD/CD ROMS. (My RAID MODE was IDE in XP OS, and still is with WIN7.)
I have three SATA HDD's.
After unplugging the SATA 2TB HDD while I installed the WIN7 OS on the 500 GB HDD (it was on the 74 RAPTOR, but I moved location, and made absolutly sure nothing went on my raptor)
So today I decided to re-hook up the 2TB Storage HDD, and when I did, I went into bios,and to the cell menu, and LOAD ALL DEFAULT SETTINGS, so it could see my newly installed HDD,which I had all my backup Data from the previous HDD. I also checked and the RAID MODE was IDE, and the boot sequence was the WDC 500GB Boot/OS drive, rebooted,then I got that annoying blanked out screen with that blinking cursor, so I got back into the bios,and changed the 1st boot to the IDE Pioneer DVD/CD ROM, 2nd boot to the 500GB HDD, and rebooted again..still got that blinking cursor.
I opened up the Mobo, checked and replugged all SATA, and power cables to the three HDDS, tried it again,then still got the blinking cursor. Seems no matter what I change in the boot sequence,it never wants to boot properly
....AND THEN,
I started with TAB > POST> started WINDOWS, then once it opened up, I went to manage Disks, saw all three HDDs were online and healthy. Win. Explorer also listed them in that folder, in device manager, it listed all three too.
The managed window showed this:
74GB (system,active,Primary partition) Storage
2TB (Primary partition) Excessive Storage
500GB (Boot, page files,crash-Dump, Primary partition) Operating system
Both the PCI IDE BusMaster and ON-Chip SATA Controller were both ENABLED.
Before I just got online, I tried RESTART, and it opened Windows the usual way, so I hope I don't have any more problems. It worked fine BEFORE I just plugged in the 2TB HDD back in.
I pretty much did what everyone suggested,except for leaving in the 74GB Raptor when I installed WIN7, which prompted me to format the drive prior to installing the OS. Also, when I changed the IDE, RAID,and AHC1, to the AHC1 Mode, just before I installed Window7, like a few suggested, I also had problems, so after the install, I went back and changed it back to IDE. My Floppy was an IDE, but I removed it from my system, and disabled in BIOS, but even a few times I went into Bios and saw that thje floppy was 1st Boot, even though I changed to either the DVD/CD Rom, or the 500GB boot drive.
So what is the preferred boot sequence?

MSI GX640 VBIOS for Win7 64-bit?

Hey all, first-time poster here. Also I apologize in advance if this is the wrong forum, but I wasn't really sure where to post this so I just followed the placement of similar threads I've found. Anyway, I've had my MSI GX640 for about a year now and I've enjoyed it quite a bit, but lately I've been BSODing out of some games. Anyway, so I'm looking to update my drivers, but the big one (i.e. for vga) needs VBIOS version BR35701.030. But all the download links I've found for it are dead, and the only other VBIOS I can find for the MSI GX640 is 1656_31, which won't work for Win7 64-bit. Are there any active download links left for VBIOS BR35701.030? I'd really appreciate some help here. Thanks in advance!

Thanks Svet! I'll work it now
UPDATE: So I followed the instructions and ran MemTest86+ (from a bootable CD because for some reason it wasn't auto-installing from the flasher tool). However, while it was running my system shut down unexpectedly. This happened at first while I was around halfway through the test, and then again when I retried; the second time, I'd barely gotten through 5%. At this time I noticed the laptop was generating quite a bit of heat so I let it sit for a while.
I've never run the test before, so is this normal? If not, what does that mean? My suspicion is (and has been for a while) that there's some problem with the laptop's internal hardware, though I'm not confident enough to try and tinker with it myself. I also got to thinking that was the case because whenever I BSOD'd playing games there was always an error in Event Viewer indicating a "critical thermal event" had occurred. So I just wanted to ask if that's so, or if there's some other explanation for what's occurring.
Of course I'll hold off on upgrading the VBIOS for now because I realize my system may not be stable enough at the moment. Thanks for the advice, everyone

ITunes 10.6.3 for Win7 64 bit does not work for iPad apps

I have downloaded and installed iTunes 10.6.3 64 bit for Window 7 four times - and re-installed 3 times. When it asks if I would like to repair, I way yes. This does not correct the problem. I have an iPad 2 w/ 3G and Wi-Fi.
My problem is that while the iTunes on my Windows PC (running Windows 7 Professional, w/Service Pack 1 - 64-bit) will start, and will show my iPad when the iPad is connected, when I click on the iPad listing, and then on the Apps tab - this feature is basically unusable. This screen shows the basic Home Screen - with all icons dimmed, and then smaller versions along the right side of the basic home screen and my 2 others I've created.
1. All of the home screens shown - and all icons - are dimmed.
2. There is no list of apps along the left side.
3. Clicking on any of the home screens or on any of the icons does nothing.
Therefore I'm not able to choose any apps to sync from the iPad to the PC - nor am I able to re-position any of the apps from one screen to another.
4. Clicking on the Sync Apps button on top left - says "All existing apps and their data on the iPad will be replaced with apps from this (the PC's) iTunes Library. In other words, the only thing I can do is sync from my PC to the iPad - thereby wiping out any new apps on the iPad.
5. Clicking on the Sync button in the lower left does nothing.
So basically, there is no syncing from my iPad to the PC -- period.
HELP!!!
(Oh - also when I connect my iPad, it says there is an update to the 5.1 operating system and would I like to update, but when I say Yes, it warns that I have purchased software on the iPad that has not yet been transferred to iTunes and I should do that first. But of course, since I can't sync, I can't do that first.)

I've also got a similar problem. I upgraded yesterday & today I find (mainly with previously purchased tracks) that iTunes only playes about 51sec of a track. The whole track plays when using "Quicktime" but this doesn't help me when I'm trying to put together a playlist.
Can anyone out the help?

Safari Public Beta 3 for Windows - 64-bit XP?

I installed the newly released beta on XP x64 and it's missing the interface. The menus are missing, and the bookmarks are just the blue dot icons with no text. Can't type in any addresses either.
Anyone else tried this? Is the app simply not x64 compatible, or is this a bug in the beta?

Found this in another post
1. Copy the Lucida Grande font files to the \Windows\Fonts directory.
2. Rename the Safari.resources folder to something else.
3. Try to start Safari, get an error message, and dismiss the message.
4. Name Safari.resources back to its original name.
5. Start Safari.
Worked for me
iMac G5 Mac OS X (10.4.9)

New ALchemy settings for some major games for Win7 (64-bit)...

[color="#ff0000"]Update 2/0/0 - Added Sid Meier's Civilization V: Ok this game is so hard to find in the registry because it uses a completely radically new type of installer that basically is a hybrid installer based on pulling the steam client game updates for Civ V and the data from the actual Civ V install DVD. The definiti've install location is similar to other steam apps are installed @ location C:\Program Files (x86)\Steam\steamapps\common\sid meier's civilization v. (The blue part is common for the majority of all steam installed games locations. Finding this for Civ V was not so easy, however.
Here is the actual entry you should add to your ALchemy.ini file and is the ONLY location that points to the aforementioned correct install path in the entire HKLM tree that is valid. This is truly a very very unique and bizarre and radically new way to find and detect correct install path strings without resorting to using the GAMEUX path (which is different on everyones computer). This path is indentical for all Civ V installs and therefore the most valid. The ALchemy team needs to address these new radical ways that game companies are injecting the install string into the registry in the future or ALchemy will start to break big time. Notice its the Uninstall path that actually functions as the only correct static install path for the game. Its a dual use path. Very clever!
[Sid Meier's Civilization V]
RegPath=HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Mi crosoft\Windows\CurrentVersion\Uninstall\Steam App 8930\InstallLocation
SubDir=
Duration=5
Preset=
GamePath=
RootDirInstallOption=FALSE
Buffers=4
MaxVoiceCount=28
DisableDirectMusic=FALSE
[color="#ff0000"]Update 2/0/0 - Added Star Wars Galaxies Trading Card Game: A nice game if you have SWG that uses gorgeous sound while playing. Here is the ALchemy.ini addition.
[Star Wars Galaxies Trading Card Game]
RegPath=HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Wind ows\CurrentVersion\App Paths\SWGTCGGame.exe\Path
Preset=
GamePath=
SubDir=
RootDirInstallOption=FALSE
Buffers=4
Duration=25
MaxVoiceCount=28
DisableDirectMusic=FALSE
[color="#ff0000"]Update 2/0/0 - Added Star Trek Online: The only correct and static install path for this wonderful game.
[Star Trek Online]
RegPath=HKEY_CURRENT_USER\Software\Cryptic\Star Trek Online\InstallLocation
Preset=
GamePath=
SubDir=
RootDirInstallOption=FALSE
Buffers=4
Duration=25
MaxVoiceCount=28
DisableDirectMusic=FALSE
[color="#ff0000"]Update 2/0/0 - Added A few oldies but goodies: Some older games I have managed to get to work with ALchemy. The sound in these older games is UNREAL in how good they sound now!
[Fallout Tactics]
RegPath=HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\4 Degrees East\Fallout Tactics\ProgramFolder
Preset=
GamePath=
SubDir=
RootDirInstallOption=FALSE
Buffers=4
Duration=25
MaxVoiceCount=28
DisableDirectMusic=FALSE
[UFO Afterlight]
RegPath=HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\AL TAR\UFO Afterlight\Path
Preset=
GamePath=
SubDir=
RootDirInstallOption=FALSE
Buffers=4
Duration=25
MaxVoiceCount=28
DisableDirectMusic=FALSE
[UFO Extraterrestrials]
RegPath=HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Tr i Synergy\UFO Extraterrestrials\installed to
Preset=
GamePath=
SubDir=
RootDirInstallOption=FALSE
Buffers=4
Duration=25
MaxVoiceCount=28
DisableDirectMusic=FALSE
The original post:
I was playing around with the D:\Program Files (x86)\Creative\ALchemy\ALchemy.ini file to force ALchemy to run with all the games on my computer. After I changed the reg paths in this .ini file all the games I had on my computer started working with ALchemy running in Windows 7 64-bit. Windows 7 registry paths for some major game titles I play are NOT in the standard location that the ALchemy.ini file has them as which is why they never get registered. I run a 64-bit version of Windows 7 so the path is slightly different then the default ones in the .ini file. Here is what I added/changed and all these games now register with ALchemy and work! Game heading bolds are my addition in this post and not how they look like in the .ini file to help see the game titles better.
I tend to shy away from any GAMEUX registry strings (for example: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\GameUX\S--5-2-837354825-494596859-745999896-00\{AFF227C-B0BB-49A5-8DFF-E87FDB864D}\ConfigApplicationPath) as they may be different for one computer to the next as they look identical to a SID string which changes radically as it is created when the game is installed. The strings should be static so they would appear identical on my computer as they would on yours. Having a string in the install path that looks like above just gives me the creeps that it is not valid. Since I only have my computer to compare this against I am not positi've of this. Just to be sure stay away from GameUX strings that are alphanumeric in nature as they can change from computer to computer or reinstall to reinstall making ALchemy fail. More on this at the bottom of this post.
[Cabal]
RegPath=HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Mi crosoft\Windows\CurrentVersion\Uninstall\CABAL Online_is\InstallLocation
Preset=
[Dragon Age Origins]
RegPath=HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Bi oWare\Dragon Age\Path
Preset=
[Dungeons & Dragons Online: Eberron Unlimited]
RegPath=HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Tu rbine\DDO\InstallLocation
Preset=
[Sid Meier's Civilization IV]
RegPath=HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Fi raxis Games\Sid Meier's Civilization 4\INSTALLDIR
Duration=5
Preset=
[Sid Meier's Civilization IV: Beyond the Sword]
RegPath=HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Fi raxis Games\Sid Meier's Civilization 4 - Beyond the Sword\INSTALLDIR
Duration=5
Preset=
[Sid Meier's Civilization IV: Warlords]
RegPath=HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Fi raxis Games\Sid Meier's Civilization 4 - Warlords\INSTALLDIR
Duration=5
Preset=
[Sid Meier's Pirates!]
RegPath=HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\At ari\Sid Meier's Pirates!\INSTALL_PATH
Preset=
[Star Wars Galaxies]
RegPath=HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Wind ows\CurrentVersion\App Paths\SwgClient_r.exe\Path
Preset=
[Wizard0]
RegPath=HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Ki ngsIsle Entertainment, Inc.\Wizard0\InstallPath
Preset=
[World of Warcraft]
RegPath=HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Bl izzard Entertainment\World of Warcraft\InstallPath
Duration=0
Preset=
I left the Preset= in all of them to have default settings. You can change or add the additional options to your pleasure but I find the defaults to work just fine. Here are all the settings for the options from the top of the .ini file.
;Creative ALchemy titles
;Format/Options:
;? [TITLE]
;? RegPath <-- registry path containing string to executable or executable's directory (use this when available; alternati've is GamePath)
;? GamePath <-- Directory to look for app (use if RegPath can't be used)
;? Buffers <-- #buffers to use (default is 4)
;? Duration <-- buffer duration (default is 25)
;? DisableDirectMusic <-- disable DirectMusic support (default is False)
;? MaxVoiceCount <-- maximum number of voices to support (default is 28)
;? SubDir <-- subdirectory offset off of path pointed to by RegPath for library support (default is empty string)
;? RootDirInstallOption <-- option to install translator support in both RegPath and SubDir directories (default is False)
Notice if you do a clean reinstall of your games in Windows 7 the game paths are in actuality in the reg path of \Wow6432Node and not just the raw HKLM\Software location due to the way the 64-bit architecture restructures its registry keys to work with 32-bit games (as many of these still are in fact).
The duration and such you can play with but I just left the settings as they were and changed the executable path location that ALchemy needs to find and work with the game is all. If you reinstall Star Wars Galaxies the new Station Launcher will put the game folder under its location and therefore it may be different in your registry. SWG (and Cabal to some extent) is the only game in this list that specifically points to an abnormal location in the registry for the install path due to the way it is launched from a voicechat type of application (The Station Launcher). But at least it works this way, so I don't care too much. I even got my classic game Sid Meier's Pirates! to work with ALchemy, yay! For Cabal I used the uninstall location for the true install path. I assume as long as the path is valid, it will work and it shows up in the ALchemy window, yay!
[color="#ff0000"]Please verify these paths in your registry do in fact have these valid regitry entries using regedit or regedt32 and not just modify the .ini file as I have shown above.
GameUX strings
There is one game I can not find any verifiable path for in the registry and that's Sid Meier's Colonization =(? If anyone has a clue where this path is stored or how to edit the .ini file to reflect the correct location and work with ALchemy please let me know! I have tried this location:
[Sid Meier's Colonization]
RegPath=HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Wind ows\CurrentVersion\GameUX\S--5-2-837354825-494596859-745999896-00\{AFF227C-B0BB-49A5-8DFF-E87FDB864D}\ConfigApplicationPath
Preset=
...but it does not seem to like the GameUX registry path at all and won't detect it. Probably because its a specialized SID (in other words, the SID will be different on my computer then it is on yours) and ALchemy does not know how to transpose SID registry entries for it to work. GameUX is basically the registry location for all your Games as they are stored under the Start > Game location of your desktop. So if anyone can figure out how to include Direct3D games that are older but do not have a valid installation registry entry please let us know! Of course I could just use the full true path in this .ini file but I am not sure how that would look like and I don't want to break ALchemy for the games it does work with. So I stuck with just valid registry entries.
I own an X-Fi XtremeGamer sound card with version .4.02 of ALchemy running on Windows 7 64-bit as of this post.

?pmc64 wrote:
Why are you adding new games to alchemy No new games use eax and surround sound should work properly without it. The alchemy team doesnt need to do anything for the future of the program because it's for legacy games. You really don't? need to add wow6432node because it should read it anyways on 64 bit systems. At least it does with the 6 games i have installed. That steam regpath will work on any steam game. you just need to change the app number. About the only games that I have that need it are the old gold source games and far cry because for some reason the original reg path isnt on there. You really should update your alchemy version to 43.06 because the previous versions have problems with windows 7 and some games wont work right unless you change a .dll file to a older one.
A few things about your post.
) Alchemy does not automatically detect the registry path settings as you have been misled for a lot of games you have to manually tell it where it goes. Hence this post.
2) You are completely missing the point of ALchemy, which is to add the depth of audio in games (yes even new ones) which is lacking without them using just EAX.
3) ALchemy is for new games not just legacy ones. hence why I have added the keys for both.
4) I have had numerous ppl tell thank me for posting this thread and their games now are read by ALchemy. If you choose to not follow this thread its you choice. No worries =)
5) My updater does not show any version besides 4.02 and I dont look for something even newer in some obscure forum post or whatnot. Official beta drivers from Creative tend to be less then stellar in performace (if any indicitation is by how their li've drivers are its even worse in their beta flavors). When I do the auto update it returns:
Status: No updates are necessary for your Creative product.
Your system already has the latest versions installed.

PCI Simple Communications Controller Driver for Win7 (64-bit)

Hello,
I am reinstalling everything on my EB 8470p laptop (Windows 7/64-bit) and I am missing the following drivers,
1) PCI Simple Communications Controller:
PCI\VEN_8086&DEV_1E3A&SUBSYS_179B103C&REV_04
PCI\VEN_8086&DEV_1E3A&SUBSYS_179B103C
PCI\VEN_8086&DEV_1E3A&CC_078000
PCI\VEN_8086&DEV_1E3A&CC_0780
(2) Unknown Device:
ACPI\HPQ6000
*HPQ6000
Your help is greatly appreciated!

Hi,
Please try:
1. http://ftp.hp.com/pub/softpaq/sp46501-47000/sp46507.exe
2. http://ftp.hp.com/pub/softpaq/sp57001-57500/sp57318.exe
Hope they help.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

BootCamp 3.2 update for Win7 64 bit (released Nov. 18, 2010)

I get update msg's when in Win 7 - Should I upgrade running Win7 or from OSx?
Not in any rush to upgrade. Can't afford any "surprises". Has anyone running Win7 with 64bit and a Radeon 4850 graphics card (the upgrade adds support for the 5870) taken this plunge?

Hi,
Mother8125 wrote:
I get update msg's when in Win 7 - Should I upgrade running Win7 or from OSx?
This is an update for the Windows part of BootCamp (a Driver Package update) so it has to be done while in WIndows.
You can also download the Driver Package update from Apples support download page here http://support.apple.com/downloads/ and run the .exe file while in Windows.
Not in any rush to upgrade. Can't afford any "surprises". Has anyone running Win7 with 64bit and a Radeon 4850 graphics card (the upgrade adds support for the 5870) taken this plunge?
No, I haven't yet
Regards
Stefan

Is firefox available for Win7 - 64 bit OS ?

If it is then I will download it. What is the URL for the download?
Thank you for your help.
Greg

If it is then I will download it. What is the URL for the download?
Thank you for your help.
Greg

After updating to the latest version for Win7 64 bit, I get the following error: Error: Platform version '6.0' is not compatible with: minVersion 6.0.1 MaxVersion 6.0.1

On the top of the above message is says XULRunner

I have exactly the same problem and my Zone Alarm Security software is causing the problem when I try to open Firefox, however this did not happen in any previous versions of Firefox I have had, including version 6.0.0
I would also greatly appreciate help on this one, or at least hope Mozilla will sort this out in another update.

HT3986 Whats about the Wifi driver for win7 on MacBook pro with Retina Display?

Hi guys
I have a MacBook pro with retina display.
I've tried to install win 7 64 bit with boot camp.
Win 7 works but I have now Wifi connection and I can't find any solution
I can't use the automatic search function from win7 because I can't use LAN because I have no LAN connection in this Mac.
So can anybody help me with this problem?

Did you download and install the Windows support software. The first menu option when running Bootcamp Assistant was to download the Windows Support software.
If you did download and install the Windows Support Software and wifi still does not work for you, consult Windows help files for how to set up wifi.

Word 2010 (64-bit on Win7 64-bit) crashes crashes on opening any document by double-click.

Sad to have to open repeat thread, but I'm having the same problem that Maurice Reed was having (that thread is now locked, although I didn't see any solution there).
I have a fresh installation of Windows 7 (64) and Office 2010 (64). Any time I double-click on a document to open it (that is, any time I open a document from Windows Explorer), Word 2010 crashes.
This includes situations where Word 2010 is already running and I open a doc or docx from Windows.
This also happens with NEWLY CREATED documents. I tested this by opening Word and creating and saving a brand new document. Opening that doc (docx) from Windows triggers this crash.
I tried deleting the Normal.dot as was suggested in other threads.
Also tried installing updates and hotfix from Microsoft. No luck.
I'm curious as to why Maurice's thread was locked when there didn't appear to be any resolution to it.
I'm stunned that such a widespread problem would go without a patch, hotfix or resolution for so many months. Am I missing something? I've been researching this for about a month off and on now. Have yet to see an actual fix. On the other hand, I've heard
about this problem from others even before it happened to me.
What's going on up there? Where are Bartley & Jeanne when we need them. ;D
- Dave F.

Hi Dave,
Maurice's thread was locked because he is using Office 2010 Beta, and his post is in the forum for Office Beta, since the Beta is past due, the whole forum is locked.
Let's go back to your question.
Have you installed the Office 2010 Service Pack 1? The service pack fixes many issues, you should try if you haven't.
Download
the Microsoft Office 2010 Service Pack 1 64-bit package now.
I may to metion is that all I know the Office 2010 64-bit will work smoothly with Windows 7 64-bit, cause I'm using it for my daily work.
So, the problem you met with mostly caused by the 3rd-party add-ins/services.
Have you tried to open the document by holding the Ctrl key? This will open the document in safe mode, if you are able to do so, this will help us to narrow down the root cause.
If it will crash even when you start it in safe mode, let's try to run a clean boot to check this issue. In a clean boot, lots of service will be disabled, if we wouldn't get problem in a clean boot, then we can enable the service little by little, then
we can find out which service might cause this issue.
For a detail instruction, you can refer to this kb:
http://support.microsoft.com/kb/929135
Let me know the result, any questions, feel free to let me know.
Sincerely,
Max Meng
Forum Support
Come back and mark the replies as
answers if they help and unmark them if they provide no help.

IE10 Win7 64-Bit Crashes continually

I installed IE10 64-bit using automatic updates today.
After rebooting and launching IE10, a popup is displayed and states, A problem caused the program to stop working correctly.
Here is the IE10_main.log:
00:00.000: ====================================================================
00:00.062: Started: 2013/03/09 (Y/M/D) 14:00:41.605 (local)
00:00.062: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
00:00.062: Command line: "C:\windows\SoftwareDistribution\Download\Install\WU-IE10-Windows7-x64.exe" /WU-SILENT
00:00.078: INFO:    Setup installer for Internet Explorer: 10.0.9200.16521
00:00.078: INFO:    Previous version of Internet Explorer: 9.0.8112.16464
00:00.109: INFO:    Checking if iexplore.exe's current version is between 10.0.8100.0...
00:00.140: INFO:    ...and 10.1.0.0...
00:00.187: INFO:    Maximum version on which to run IEAK branding is: 10.1.0.0...
00:00.187: INFO:    iexplore.exe version check success. Install can proceed.
00:00.187: INFO:    Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)
00:00.187: INFO:    Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
00:00.203: INFO:    Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
00:00.234: INFO:    Trying to extract ID: 7006 (0) as "IE10-neutral.Extracted.cab"
00:04.976: INFO:    Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
00:05.008: INFO:    Extracted Spelling dictionary for en to C:\windows\TEMP\IE15B4F.tmp\Spelling_en.msu.
00:05.975: INFO:    Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
00:06.022: INFO:    Extracted Hyphenation dictionary for en to C:\windows\TEMP\IE15B4F.tmp\Hyphenation_en.msu.
00:06.053: INFO:    Trying to extract ID: 7128 (1033) as "IE10-support.cab"
00:12.402: INFO:    Updated Download list, Hardware Blocking list, and no reboot policy files successfully downloaded and extracted for use.
00:12.418: INFO:    Launched program to check hardware: "C:\windows\TEMP\IE15B4F.tmp\IE10-SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\windows\TEMP\IE15B4F.tmp\IE10-support\HardwareBlockingList.xml"
00:12.792: INFO:    Hardware support check succeeded. Installation will continue.
00:12.979: INFO:    Windows 7 operating system detected.
00:12.979: INFO:    Service pack major: 1
00:13.244: INFO:    Service pack minor: 0
00:13.322: INFO:    Service pack name: Service Pack 1
00:13.432: INFO:    Version Check for (KB2670838) of C:\windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll: 6.2.9200.16492 >= 6.2.9200.16492 (True)
00:13.447: INFO:    Version Check for (KB2639308) of C:\windows\System32\Ntoskrnl.exe: 6.1.7601.18044 >= 6.1.7601.17727 (True)
00:13.478: INFO:    Version Check for (KB2533623) of C:\windows\System32\api-ms-win-security-base-l1-1-0.dll: 6.1.7601.18015 >= 6.1.7601.17617 (True)
00:13.510: INFO:    Version Check for (KB2731771) of C:\windows\System32\kernel32.dll: 6.1.7601.18015 >= 6.1.7601.17932 (True)
00:13.510: INFO:    Checking for correct version of C:\windows\Fonts\segoeui.ttf.
00:13.556: INFO:    Version Check for (KB2786081) of C:\windows\System32\taskhost.exe: 6.1.7601.18010 >= 6.1.7601.18010 (True)
00:53.805: ERROR:   WMI query for Hotfixes timed out. Query string: 'Select HotFixID from Win32_QuickFixEngineering WHERE HotFixID="KB2729094"' Error: 0x00040004 (262148).
00:54.148: INFO:    IE Setup prerequisite package for KB2729094 included: C:\windows\TEMP\IE15B4F.tmp\KB2729094_amd64.cab
00:54.242: INFO:    IE Setup prerequisite package for KB2729094 included: C:\windows\TEMP\IE15B4F.tmp\KB2729094_amd64.cab
00:54.335: INFO:    A local copy of the KB2729094 installation package has been copied to KB2729094_amd64.MSU.
00:54.351: INFO:    IE Setup Language pack included: C:\windows\TEMP\IE15B4F.tmp\IE-Spelling-en.cab
00:54.413: INFO:    IE Setup Language pack included: C:\windows\TEMP\IE15B4F.tmp\IE-Hyphenation-en.cab
00:54.429: INFO:    Waiting for 1 prerequisite downloads.
00:54.444: INFO:    Prerequisite download processes have completed. Starting Installation of 1 prerequisites.
00:54.632: INFO:    Launched package installation: C:\windows\SysNative\dism.exe /online /add-package /packagepath:C:\windows\TEMP\IE15B4F.tmp\KB2729094_amd64.cab /quiet /norestart
01:07.938: INFO:    Process exit code 0x00000000 (0) [The operation completed successfully. ]
01:08.001: INFO:    The neutral pack was not successfully downloaded from the internet. Installation will continue using the extracted package.
01:08.157: INFO:    No reboot logic message NrApiStart(0), lParam=0x00252a70 returned 0x00000000.
01:14.225: INFO:    No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.
01:14.241: INFO:    No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
01:14.241: INFO:    Installing with the extracted package. C:\windows\TEMP\IE15B4F.tmp\IE10-neutral.Extracted.cab
01:14.241: INFO:    Launched package installation: C:\windows\SysNative\dism.exe /online /add-package /packagepath:C:\windows\TEMP\IE15B4F.tmp\IE10-neutral.Extracted.cab /quiet /norestart
04:05.561: INFO:    Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
04:05.577: INFO:    Setting registry to check if Internet Explorer is the default browser on first run: SUCCESS.
04:05.577: INFO:    Preparing to install Spelling_en.msu using C:\windows\TEMP\IE15B4F.tmp\Spelling_en.msu
04:05.686: INFO:    Launched package installation: C:\windows\SysNative\dism.exe /online /add-package /packagepath:C:\windows\TEMP\IE15B4F.tmp\Spelling_en\Windows6.2-KB2764916-x86.cab /quiet /norestart
04:59.491: INFO:    Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
04:59.491: INFO:    Preparing to install Hyphenation_en.msu using C:\windows\TEMP\IE15B4F.tmp\Hyphenation_en.msu
04:59.537: INFO:    Launched package installation: C:\windows\SysNative\dism.exe /online /add-package /packagepath:C:\windows\TEMP\IE15B4F.tmp\Hyphenation_en\Windows6.2-KB2764913-x86.cab /quiet /norestart
05:50.565: INFO:    Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
05:50.565: INFO:    Preparing to install IE-Spelling-en.cab using C:\windows\TEMP\IE15B4F.tmp\IE-Spelling-en.cab
05:50.581: INFO:    Launched package installation: C:\windows\SysNative\dism.exe /online /add-package /packagepath:C:\windows\TEMP\IE15B4F.tmp\IE-Spelling-en.cab /quiet /norestart
06:04.247: INFO:    Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
06:04.247: INFO:    Preparing to install IE-Hyphenation-en.cab using C:\windows\TEMP\IE15B4F.tmp\IE-Hyphenation-en.cab
06:04.278: INFO:    Launched package installation: C:\windows\SysNative\dism.exe /online /add-package /packagepath:C:\windows\TEMP\IE15B4F.tmp\IE-Hyphenation-en.cab /quiet /norestart
06:17.210: INFO:    Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
06:17.226: INFO:    No reboot logic message NrApiInstallDone(7), lParam=0x00000bc2 returned 0x00000000.
06:17.226: INFO:    No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
06:17.257: INFO:    No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
06:17.257: INFO:    Verifying that the Internet Explorer Optional Component is enabled.
06:17.273: INFO:    Setup exit code: 0x00000BC2 (3010) - Installation Succeeded. Reboot required.
06:17.304: INFO:    Scheduling upload to IE SQM server: http://sqm.microsoft.com/sqm/ie/sqmserver.dll
06:20.237: INFO:    SQM Upload returned 403
06:21.703: INFO:    Cleaning up temporary files in: C:\windows\TEMP\IE15B4F.tmp
06:21.781: INFO:    Unable to remove directory C:\windows\TEMP\IE15B4F.tmp, marking for deletion on reboot.
06:21.797: INFO:    Released Internet Explorer Installer Mutex

I uninstall IE10 but I have KB2729094 already installed with IE9.
Here is the IE10_main.log:
00:00.000: ====================================================================
00:00.031: Started: 2013/03/16 (Y/M/D) 15:24:53.273 (local)
00:00.031: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
00:00.031: Command line: "C:\Users\Mobile-Mark\Downloads\IE10-Windows6.1-x64-en-us(1).exe"
00:00.031: INFO:    Setup installer for Internet Explorer: 10.0.9200.16521
00:00.046: INFO:    Previous version of Internet Explorer: 9.0.8112.16470
00:00.046: INFO:    Checking if iexplore.exe's current version is between 10.0.8100.0...
00:00.109: INFO:    ...and 10.1.0.0...
00:00.109: INFO:    Maximum version on which to run IEAK branding is: 10.1.0.0...
00:00.109: INFO:    iexplore.exe version check success. Install can proceed.
00:00.109: INFO:    Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)
00:00.109: INFO:    Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
00:00.218: INFO:    Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
00:00.234: INFO:    Trying to extract ID: 7006 (0) as "IE10-neutral.Extracted.cab"
00:03.556: INFO:    Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
00:03.697: INFO:    Extracted Spelling dictionary for en to C:\windows\TEMP\IE124CF.tmp\Spelling_en.msu.
00:03.744: INFO:    Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
00:03.790: INFO:    Extracted Hyphenation dictionary for en to C:\windows\TEMP\IE124CF.tmp\Hyphenation_en.msu.
00:03.868: INFO:    Trying to extract ID: 7128 (1033) as "IE10-support.cab"
00:05.881: INFO:    PauseOrResumeAUThread: Successfully paused Automatic Updates.
00:08.611: INFO:    Updated Download list, Hardware Blocking list, and no reboot policy files successfully downloaded and extracted for use.
00:08.658: INFO:    Launched program to check hardware: "C:\windows\TEMP\IE124CF.tmp\IE10-SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\windows\TEMP\IE124CF.tmp\IE10-support\HardwareBlockingList.xml"
00:09.484: INFO:    Graphics Device Information: Mobile Intel(R) 4 Series Express Chipset Family
00:09.484: INFO:    Hardware support check succeeded. Installation will continue.
00:09.500: INFO:    Windows 7 operating system detected.
00:09.500: INFO:    Service pack major: 1
00:09.500: INFO:    Service pack minor: 0
00:09.500: INFO:    Service pack name: Service Pack 1
00:09.609: INFO:    Version Check for (KB2670838) of C:\windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll: 6.2.9200.16492 >= 6.2.9200.16492 (True)
00:09.625: INFO:    Version Check for (KB2639308) of C:\windows\System32\Ntoskrnl.exe: 6.1.7601.18044 >= 6.1.7601.17727 (True)
00:09.656: INFO:    Version Check for (KB2533623) of C:\windows\System32\api-ms-win-security-base-l1-1-0.dll: 6.1.7601.18015 >= 6.1.7601.17617 (True)
00:09.656: INFO:    Version Check for (KB2731771) of C:\windows\System32\kernel32.dll: 6.1.7601.18015 >= 6.1.7601.17932 (True)
00:09.672: INFO:    Checking for correct version of C:\windows\Fonts\segoeui.ttf.
00:09.718: INFO:    Version Check for (KB2786081) of C:\windows\System32\taskhost.exe: 6.1.7601.18010 >= 6.1.7601.18010 (True)
00:36.005: INFO:    Waiting for 0 prerequisite downloads.
00:36.005: INFO:    The neutral pack was not successfully downloaded from the internet. Installation will continue using the extracted package.
00:36.285: INFO:    No reboot logic message NrApiStart(0), lParam=0x000329f0 returned 0x00000000.
00:38.969: INFO:    No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.
00:38.969: INFO:    No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
00:38.969: INFO:    Installing with the extracted package. C:\windows\TEMP\IE124CF.tmp\IE10-neutral.Extracted.cab
00:39.499: INFO:    Launched package installation: C:\windows\SysNative\dism.exe /online /add-package /packagepath:C:\windows\TEMP\IE124CF.tmp\IE10-neutral.Extracted.cab /quiet /norestart
04:44.077: INFO:    Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
04:44.077: INFO:    Setting registry to check if Internet Explorer is the default browser on first run: SUCCESS.
04:44.077: INFO:    Preparing to install Spelling_en.msu using C:\windows\TEMP\IE124CF.tmp\Spelling_en.msu
04:44.140: INFO:    Launched package installation: C:\windows\SysNative\dism.exe /online /add-package /packagepath:C:\windows\TEMP\IE124CF.tmp\Spelling_en\Windows6.2-KB2764916-x86.cab /quiet /norestart
05:31.704: INFO:    Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
05:31.704: INFO:    Preparing to install Hyphenation_en.msu using C:\windows\TEMP\IE124CF.tmp\Hyphenation_en.msu
05:31.798: INFO:    Launched package installation: C:\windows\SysNative\dism.exe /online /add-package /packagepath:C:\windows\TEMP\IE124CF.tmp\Hyphenation_en\Windows6.2-KB2764913-x86.cab /quiet /norestart
06:17.756: INFO:    Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
06:17.756: INFO:    No reboot logic message NrApiInstallDone(7), lParam=0x00000bc2 returned 0x00000000.
06:17.756: INFO:    No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
06:17.818: INFO:    No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
06:17.818: INFO:    Verifying that the Internet Explorer Optional Component is enabled.
07:01.639: INFO:    PauseOrResumeAUThread: Successfully resumed Automatic Updates.
07:01.639: INFO:    Setup exit code: 0x00000BC2 (3010) - Installation Succeeded. Reboot required.
07:01.811: INFO:    Scheduling upload to IE SQM server:
http://sqm.microsoft.com/sqm/ie/sqmserver.dll
07:01.998: INFO:    SQM Upload returned 403
07:14.384: INFO:    Cleaning up temporary files in: C:\windows\TEMP\IE124CF.tmp
07:14.493: INFO:    Unable to remove directory C:\windows\TEMP\IE124CF.tmp, marking for deletion on reboot.
07:14.493: INFO:    Rebooting computer...
07:14.540: INFO:    Released Internet Explorer Installer Mutex
Now what do I do?

Audition 3.0 installer under Win7 64-bit fails with "problem while extracting files"

I'm having trouble installing Audition 3.0 on Windows 7 64-bit.
I downloaded an installer for Audition 3.0 (called ADBEAudition_WWEFGJIS.exe, 352 MB).
This installer runs but when the progress bar is at the far end, it raises a dialog saying "A problem occurred while extracting some files. Check available space on your computer and the write privileges on the destination folder."
At this time, the main installer dialog shows 100% completed and displays the filename "...\Audition 3.0\Adobe Bridge CS3\redist\WindowsXP-KB898715-x64-enu.exe". I don't know whether this filename is related to the problem, it might just be the last file extracted.
I'm running Windows 7 64-bit on an Asus laptop with 4GB of RAM and an AMD Turion II P520 processor. I don't know whether this CPU is "SSE2-enabled" or not, as specified in the minimum system requirements.
I've rebooted the machine and the problem occurs consistently.
Thanks in advance for any suggestions.
KrisBlueNZ

Hey, I used to have a Diamond PCI card somewhere.
I would say that all bets are off with the drivers, but there is a strong possibility that you could be hearing the problems with the sample rate converter in Windows 7 (and I think in Vista). This affects recording and playback, and the first line of defence is to make sure that the source audio's sample rate is the same as the "default sample rate" that is set in every area in the Windows Control panel audio area.
The sample rate converter built into XP has a range of settings that are usually set to "high quality", and sample rate conversion is rare anyway with that OS. With Windows 7, the concept of the newer Windows mixer irequires that the sample rate converter changes all the audio on the fly to the default ample rate, but the converter is not very good. This doesn't always affect the audio - anything using DirectX seems OK, but anything using "WaveOut" audio (eg YouTube playback) is affected.
Microsoft acknowledges the problem and have issued a patch at http://support.microsoft.com/kb/2653312

Safari fix that worked for us after persistent crashes

In trying to back up all files on our G4 Powerbook in case our hard drive was crashing (we had tried fixing permissions, reinstalling Safari after using Pacifist to take it out of one of the software updates, resetting Safari, boosting Safari's database storage cache, and then were having Google Sketchup starting to crash as well) we got this message during the backup - 'Unable to read the file cookies.plist'. Since I'd tried resetting Safari I hadn't thought this file might be the corrupted one. I went to Library/Cookies and threw the file away and now everything's fine - Safari and Sketchup are both working. Good luck!

If doing so improved the situation, this confirms that one of Safari's database files has become corrupt and is causing the crashing, and this shows up in your crash log as Thread 3 having crashed.
The blacklists from Google’s Safe Browsing Initiative (where Safari checks for 'fraudulent websites') are contained in a database cache file called SafeBrowsing.db - the file was created when you first launched Safari 3.2, and if you have the browser open, the file is modified approximately every 30 minutes.
As an alternative to turning off 'Warn when visiting a fraudulent website', which will lose you that important security feature, you should delete that database file, (but first close Safari):
Home/Library/Caches/com.apple.Safari (this is a folder)/SafeBrowsing.db
It will be recreated next time you open Safari, and will then start again collecting details of dodgy websites.
If you are interested:
How the Anti-Phishing feature of Safari 3.2 works:
http://www.macworld.com/article/137094/2008/11/safarisafebrowsing.html

Safari v5.0.2 for Win7 (64-bit) crashes with Kraken benchmark

Similar Messages

Maybe you are looking for