Safari video issue

Some videos embedded in websites won't work in Safari, it just shows a blank window - no play button, no controls. Youtube videos work fine. I'm on a MacBook Pro, OSX 10.6.8

Presumably Flash related.
Two bugs, one affecting Apple's Mac platform and another attacking Microsoft's Windows, exploit certain Flash player vulnerabilities to install malware onto users' systems, reports ArsTechnica. While users of other operating systems like Linux have yet to report attacks, Adobe's advisory notes the exploit affects all platforms.
Designated as CVE-2013-0634, the first vulnerability targets the Safari and Firefox Web browsers running on OS X, and is also being used as a trojan to deploy Microsoft Word documents containing malware. For Mac users, the flaw affects Adobe Flash Player version 11.5.502.146 or earlier.
On March 1 Apple again blocked Flash Player for Lion and Mountain Lion:
http://support.apple.com/kb/HT5660
The Adobe Flash patch can be found on Adobe’s website, and users can visit this page to check if their software is the most curent version.
You should uninstall any previous version first, and repair permissions after installing the new version.
If you still get a ‘plug-ins blocked’ message:
http://support.apple.com/kb/HT5271

Similar Messages

  • Video issues on ipad

    When I try to watch videos in safari most of the time it only buffers a little in the beginning and then pretty much stops or goes so slow it's basically useless. I know this is not a wifi or slow connection problem because apps like "ABC" play HD video very fast no problem. Any ideas or similar problems?

    Have same exact anoying issue. Went to the store to exchange it with no luck. It doesn't work with the YouTube application either. My iPhone works smooth with all the videos but for ipad there is no solution. I changed my router and all my home system and still has the problem with safari videos and YouTube.
    Hope to get a response that solves the issue. Good luck.

  • Jabber for iPad video issue

    How can I troubleshoot video issues?
    I setup the iPad device (G711) and then placed a call to a Jabber for Windows (G729) phone. Audio worked fine but no video. I changed the Jabber for Windows to G711 and video started working?
    Is Jabber for iPad going to support G729 and if so when?
    Thanks,
    Doug

    Hello i have the same issue!
    Someone find the cause for this issue?
    Regards
    Leonardo Santana

  • Kernel Panic on iMac with Pixelated Video Issues

    One of our work iMacs has been having weird pixelate video issues recently. Sometimes previews of program windows will freeze on screen... and as you move the window around the screen "erases" this preview from the LCD... It is a 2006 24" White iMac 6,1. Now we get some Kernel Panics with the following error message. Please help me decipher it. Thanks!
    Interval Since Last Panic Report:  8641685 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    E865F049-A575-4D59-A574-9D24C6EFD141
    Fri Mar 30 07:35:41 2012
    Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
    0x43923bb8 : 0x21b837 (0x5dd7fc 0x43923bec 0x223ce1 0x0)
    0x43923c08 : 0x2abf6a (0x59e3d0 0x53c01f 0xe 0x59e59a)
    0x43923ce8 : 0x2a1a78 (0x43923d00 0x0 0x43923da8 0x53c01f)
    0x43923cf8 : 0x53c01f (0xe 0x48 0x10 0x10)
    0x43923da8 : 0x53d2f5 (0x78f3000 0x785c240 0x43923df8 0x78f3000)
    0x43923dc8 : 0x570fcd (0x78f3000 0x785c240 0x43923de8 0x2a45c9)
    0x43923e18 : 0x28bb49 (0x78f3000 0x749a4a0 0x749a4b8 0x2106d8)
    0x43923e58 : 0x21dbe5 (0x749a0a4 0x749a484 0x43923ea8 0x3a23)
    0x43923e98 : 0x210a86 (0x749a000 0x0 0xbc747a0 0x7f6b690)
    0x43923ef8 : 0x216f84 (0x749a000 0x0 0x0 0x0)
    0x43923f78 : 0x295c57 (0x7daf5e8 0x0 0x0 0x0)
    0x43923fc8 : 0x2a256d (0x7daf5e4 0x0 0x10 0x0)
    BSD process name corresponding to current thread: Dock
    Mac OS version:
    10K549
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
    System model name: iMac6,1 (Mac-F4218FC8)
    System uptime in nanoseconds: 154254231492
    unloaded kexts:
    (none)
    loaded kexts:
    com.apple.driver.AppleHWSensor          1.9.3d0 - last loaded 121081986701
    com.apple.filesystems.autofs          2.1.0
    com.apple.driver.AppleTyMCEDriver          1.0.2d2
    com.apple.driver.InternalModemSupport          2.6.2
    com.apple.driver.AudioAUUC          1.57
    com.apple.driver.AppleIntelYonahProfile          14
    com.apple.driver.AppleUpstreamUserClient          3.5.7
    com.apple.driver.AppleIntelPenrynProfile          17
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleMCCSControl          1.0.20
    com.apple.driver.AppleIntelNehalemProfile          11
    com.apple.driver.AppleHDA          2.0.5f14
    com.apple.driver.AudioIPCDriver          1.1.6
    com.apple.driver.AppleGraphicsControl          2.10.6
    com.apple.GeForce          6.3.6
    com.apple.driver.AppleIntelMeromProfile          19
    com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
    com.apple.driver.AppleBacklight          170.0.46
    com.apple.driver.AppleLPC          1.5.1
    com.apple.driver.AppleIRController          303.8
    com.apple.driver.CSRHIDTransitionDriver          2.4.5f3
    com.apple.driver.USBCameraFirmwareLoader          1.1.0
    com.apple.iokit.SCSITaskUserClient          2.6.8
    com.apple.BootCache          31.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.driver.AppleUSBHub          4.2.4
    com.apple.driver.AppleFWOHCI          4.7.3
    com.apple.driver.AirPortBrcm43xx          423.91.27
    com.apple.driver.AirPortBrcm43224          428.42.4
    com.apple.iokit.AppleYukon2          3.2.1b1
    com.apple.iokit.IOAHCIBlockStorage          1.6.4
    com.apple.driver.AppleEFINVRAM          1.4.0
    com.apple.driver.AppleUSBEHCI          4.2.4
    com.apple.driver.AppleAHCIPort          2.1.7
    com.apple.driver.AppleIntelPIIXATA          2.5.1
    com.apple.driver.AppleUSBUHCI          4.2.0
    com.apple.driver.AppleRTC          1.3.1
    com.apple.driver.AppleHPET          1.5
    com.apple.driver.AppleACPIButtons          1.3.6
    com.apple.driver.AppleSMBIOS          1.7
    com.apple.driver.AppleACPIEC          1.3.6
    com.apple.driver.AppleAPIC          1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
    com.apple.security.sandbox          1
    com.apple.security.quarantine          0
    com.apple.nke.applicationfirewall          2.1.14
    com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
    com.apple.driver.AppleProfileReadCounterAction          17
    com.apple.driver.AppleProfileTimestampAction          10
    com.apple.driver.AppleProfileThreadInfoAction          14
    com.apple.driver.AppleProfileRegisterStateAction          10
    com.apple.driver.AppleProfileKEventAction          10
    com.apple.driver.AppleProfileCallstackAction          20
    com.apple.iokit.IOSurface          74.2
    com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
    com.apple.iokit.IOSerialFamily          10.0.3
    com.apple.driver.AppleHDAHardwareConfigDriver          2.0.5f14
    com.apple.driver.DspFuncLib          2.0.5f14
    com.apple.iokit.IOAudioFamily          1.8.3fc2
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.iokit.IOFireWireIP          2.0.3
    com.apple.iokit.AppleProfileFamily          41
    com.apple.driver.AppleHDAController          2.0.5f14
    com.apple.iokit.IOHDAFamily          2.0.5f14
    com.apple.driver.AppleSMC          3.1.0d5
    com.apple.driver.IOPlatformPluginFamily          4.7.0a1
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleBacklightExpert          1.0.1
    com.apple.nvidia.nv40hal          6.3.6
    com.apple.NVDAResman          6.3.6
    com.apple.iokit.IONDRVSupport          2.2.1
    com.apple.iokit.IOGraphicsFamily          2.2.1
    com.apple.driver.CSRUSBBluetoothHCIController          2.4.5f3
    com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
    com.apple.iokit.IOBluetoothFamily          2.4.5f3
    com.apple.iokit.IOUSBHIDDriver          4.2.0
    com.apple.driver.AppleUSBMergeNub          4.2.4
    com.apple.iokit.IOSCSIBlockCommandsDevice          2.6.8
    com.apple.iokit.IOUSBMassStorageClass          2.6.7
    com.apple.driver.AppleUSBComposite          3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
    com.apple.iokit.IOBDStorageFamily          1.6
    com.apple.iokit.IODVDStorageFamily          1.6
    com.apple.iokit.IOCDStorageFamily          1.6.1
    com.apple.iokit.IOATAPIProtocolTransport          2.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
    com.apple.driver.XsanFilter          402.1
    com.apple.driver.AppleFileSystemDriver          2.0
    com.apple.iokit.IOUSBUserClient          4.2.4
    com.apple.iokit.IOFireWireFamily          4.2.6
    com.apple.iokit.IO80211Family          320.1
    com.apple.iokit.IONetworkingFamily          1.10
    com.apple.iokit.IOAHCIFamily          2.0.6
    com.apple.iokit.IOATAFamily          2.5.1
    com.apple.iokit.IOUSBFamily          4.2.4
    com.apple.driver.AppleEFIRuntime          1.4.0
    com.apple.iokit.IOHIDFamily          1.6.6
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.TMSafetyNet          6
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.driver.DiskImages          289
    com.apple.iokit.IOStorageFamily          1.6.3
    com.apple.driver.AppleACPIPlatform          1.3.6
    com.apple.iokit.IOPCIFamily          2.6.5
    com.apple.iokit.IOACPIFamily          1.3.0
    Model: iMac6,1, BootROM IM61.0093.B07, 2 processors, Intel Core 2 Duo, 2.16 GHz, 4 GB, SMC 1.10f2
    Graphics: NVIDIA GeForce 7300 GT, NVIDIA GeForce 7300 GT, PCIe, 128 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: Built-in Ethernet, Ethernet, en0
    Serial ATA Device: ST3320620AS, 298.09 GB
    Parallel ATA Device: MATSHITADVD-R   UJ-85J
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8501, 0xfd400000 / 2
    USB Device: Express USB2, 0x0dc4  (Macpower Peripherals Ltd.), 0x00db, 0xfd500000 / 3
    USB Device: Hub in Apple Pro Keyboard, 0x05ac  (Apple Inc.), 0x1003, 0x1d100000 / 2
    USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc50a, 0x1d110000 / 4
    USB Device: Apple Pro Keyboard, 0x05ac  (Apple Inc.), 0x020b, 0x1d130000 / 3
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8206, 0x7d100000 / 2
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8240, 0x7d200000 / 3

    Re: Kernel Panic on iMac Intel Core 2 Duo with Lion 10.7.1, 4gb RAM
    27-sep-2011 11:53 (in response to jose guzman) Launch the Apple Hardware Test program, run the extended tests at least twice, and then download and run Rember. All indications are that you have bad or flaky RAM.
    27" i7 iMac 10.6.8 , Mac OS X (10.7.1), G4 450 MP 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2) 
    I did that and it doesn't work

  • HT5313 What video issues were there on 10.7.4 that got fixed in 10.7.5? Any details?

    The OS X update bulletin for 10.7.5 lists that one of the fixes in this update is
    * Resolve a video issue with some VGA projectors when connected to certain Mac notebooks.
    What is really being addressed? Any details?

    Hi Tony, Ben and others,
    I'm not sure it was the same problem, but a little while ago I have problems too with RADIUS not working on Lion,
    and by searching for solutions I found out that it's necessarily to edit /etc/raddb/clients.conf
    My problem here it didn't work was with the shared secret.
    So I edited /etc/raddb/clients.conf and put at the end of the file :
    client  10.0.0.0/24 {
            secret          =  shared-secret-type-what-you-want-here
            shortname       = private-network
    BEFORE I started RADIUS and added AE's to it
    I hope it solves your problem too …
    GreetingZz John
    PS For some strange reason I had to change the
          'Wireless Security" from WPA2 Personal ---> WPA2 Enterprice on each AE manualy
         But maybe that's just a little bug in when opening the AE in Airport Utility 6.1 cause is WAS
         working before I looked into the AE's
    PPS iPV6 not changed here
    Message was edited by: Abhor

  • Audio and Video issue with Windows 8.1 upgrade on Ideapad n585

    I upgraded my Ideapad N585 to Windows 8.1 the other day, took forever, but it made it through.  Unfortunately, I now get boot erors for the Dolby software, and the AMD Vision/Catalysyt Control Center.  Neither of these programs are able to start, from startup or even manually.  They just won't run.  Sound seems to come out fine still, but I do have video issues. 
    First off, my computer doesn't seem to recognize a HDtv as a monitor through the HDMI port.  I still get an image, but it's set to current screen resolution instead of 1080i.  I tried using the detect button to force it to look for a second monitor (my TV), but it showed nothing connected, though at the time I was using two screens.  Now my monitor's screen resolution seems to be a little higher than my TV's, but it doesn't fit the screen properly, and will sometimes put a black border around the desktop, not using the full screen.  I have also noticed, that when plugged into the tv, if a background program like a screen saver starts (and I am one of the few people who still use them, I like BOINC, sue me), it will reset the screen resolution to what it requires.  When the program exits, the screen resolution stays, and that becomes the new max screen resolution until I restart the computer.  So far, it only does this through the tv, if I run the laptop monitor alone, it doesn't happen.
    I did try updating the software with what's available through the support site, but nothing happened.  I even went as far as to use the Windows 9x~XP standbys of completely uninstalling, manually removing everything from the system registry I could find relating to these two programs, and then finally reinstalling the software.  Giving the audio and video a complete clean slate to work from, and got no positive results.  I restart the computer, Dolby and Catalyst won't boot, and blind to HDtv.  Problems as described above still apply.
    Anybody else have this issue?  Anybody got a fix?

    have you found a solution to this?
    My computer updated to 8.1 without my wanting it to, I have the same problems as you. I installed the video driver because the brightness was locked on what I had it. (the bar would move but did not change)
    I searched for brightness and n585 and I was able to find a driver, now brightness works but HDMI still does not. When I plug in the TV both screens go black with all 4 options in the "project" screen.
    *edit*
    this worked for me i stumbled across this
    I unplugged the power cable with the hdmi cable plugged in. Hit (windows key+p) scrolled to duplicate and it worked.I plugged in the power cord back in and it still worked. 

  • Video issues in mac os 10.6.4 and windows 7 64x

    To start with, my computer is the late 2008 model Imac, has 3g of memory, and wasn't experiencing any video problems until earlier this month. I've already had it serviced, and was told that the issue was resolved, and was unrelated to hardware. Fifteen minutes after repair and setup, the exact same symptoms occur.
    I'm thinking, Ok, perhaps this is a bad install of windows, since it happened in a windows program (everquest 2, an online game), and rebooted into Mac. Almost immediately, I saw video problems (snow, pixels, lines, distortion)on the mac side, which had occurred with the windows side.
    My husband is angry, I'm angry, so I decide that I'm going to trash everything and start off completely fresh. I intended to reinstall mac 10.6.4 after erasing everything, so I removed the windows partition, and attempted to reinstall snow leapard, without using the original leapard disc that came with the system. I didn't realize until too late that I had forgotten to erase the original os, but I figured I'd see if there were any problems and go from there. I had no initial problems with the install of either os (mac or windows), except to note that I couldn't install the apple software updates on the windows side. I was able to fully update the mac side before attempting any installation of the windows os.
    I started having video problems really quickly in the windows side after the full installation and update, but the system disabled the initial nvidia drivers and went to plug and play drivers. The only thing that displayed any further problems was the ISight camera, but that was to be expected without the apple updates.
    I did read the bootcamp manual afterwards, and saw that my IMac, being an earlier version, might not properly install bootcamp drivers for windows 7 64x, although we had successfully located and manually installed the drivers earlier when first installing windows 7 64x. Keep in mind, I'd had the os installed for several months without any video problems, and in fact, it worked like a dream in both os after the computer had a previous repair of the hard drive, sound card, and logic board.
    Anyway, to continue, after the video symptoms occurred on windows, I switched back over to mac to look for and install a video firmware download that I had located through these same forums. I had to change os because it was a dmg, so I did so. Now, I still had the snow leapard install disc in the computer, so that's the first thing I saw on the screen when booting into mac. I immediately started also seeing the pixels and some distortion, but it stopped briefly. I tried bringing up Firefox to get to the download, but the computer froze (showed the little round ball)and wouldn't respond further. I tried several reboots, and could usually at least get into snow leapard, but the computer froze each time.
    Finally, after several attempts, the computer won't boot into either os, and won't go into the install disc either. I'm completely at a loss, because I'm told this IS NOT a hardware issue, and the problem was resolved with simply resetting everything. The problem was NOT resolved with that reset, because I'm able to reproduce this issue consistently with multiple reboots, and have even recorded it with a camera I have. I'm at my wit's end, because I'm on a fixed income, and this costs me time and money I just don't have. It's caused me to get behind on one of my bills, because I have to have a computer, and further repairs, while covered under warranty, are going to cost me further money to get to and from the service center. Not to mention the fact that it's going to take another month for me to wait for my money to become available so that I can pay for the ride back and forth for the repair.
    Anyone, anyone at all, have any suggestions that may help? I have access to another computer, and can try using that computer to help me boot the other computer up, if I know how. Please, this is so frustrating to me, so I'm hoping someone can suggest something that may help.
    I know I mentioned in the post what type of video issues I'm experiencing, but I figured I'd reiterate to make it easy. The computer will display a distorted image on bootup, like a pixelated off-center image. You know, kinda like 2 punch cards held up to each other, with the same holes, but off center. You also get snow, when able to boot up, with the screen sometimes showing half the screen, flickering. Like the screen is broken, but it's not even scratched. And it's not all the time either, if it was, I would think maybe an internal screen was broken or cracked (I've worked tech support for devices with internal screens, so I understand you can have a perfectly good outer screen, but a cracked inner screen). Right now, on bootup, I get that punch card effect, then the screen goes blank. I should mention that sometimes the system will show that, but then boot into windows with no immediate distortion, but will show distortion in the mac side if I'm able to boot into snow leapard. Hope this information helps someone give me an answer that helps.

    To start with, my computer is the late 2008 model Imac, has 3g of memory …
    I'm assuming you mean the Early 2008 iMac since there is no "late 2008" one. AFAIK, it came with 2 GB of RAM standard & the common BTO option would have been 4 GB, so can we assume that you have installed an aftermarket memory module to get to 3 GB?
    I've already had it serviced, and was told that the issue was resolved, and was unrelated to hardware. Fifteen minutes after repair and setup, the exact same symptoms occur.
    What repair and setup? Is this something you did after getting the iMac back from service? If so, what exactly did you do?
    I had no initial problems with the install of either os (mac or windows), except to note that I couldn't install the apple software updates on the windows side.
    Do you mean the Windows drivers or something else? Did you follow the Bootcamp install procedure exactly when reinstalling Windows or not?
    I switched back over to mac to look for and install a video firmware download that I had located through these same forums.
    What video firmware download do you mean? AKAIK, there are none for early 2008 iMacs.
    No offense intended, but it is hard to understand exactly what you have done because while you mention much, you don't say a lot about the specifics for a lot of that. In general, it is best to concentrate on those things & keep the commentary to a minimum.

  • Video Issues in Adobe Presenter 9

    Video issues - I have inserted a 3 minute video in a Presenter 9  file and it plays fine when previewing but only 6 seconds when published. Plays 6 seconds and then buffers.  I have tried inserting  different formats and still get the same results.  Anyone else have this issue or ideas on how to resolve?

    Hi there,
    I got a solution from the Adobe Captivate technical team.
    As an attempt to resolve your issue
    Uncheck the option “Accelerate 3D graphics” under VM Settings by going to VM >> Settings >> Display>> 3D graphics
    Once done please try capturing and hopefully this must resolve your issue
    I did this and it worked, yeah. However, it is still incredibly frustrating using VMWare, when I am recording using Presenter it keeps freezing and I have to shut the entire system down. Guess I'll try the Partition!!!
    Thanks again

  • IMac G5 video issues.

    I have a iMac G5 20" 2.16 s/n W86494YZVUV that has a serious video issue. What appears to be a set of small lines appears on each side of each icon and the cursor.  Additionally, large random angular spikes appear all over making the display virtually unreadable. Is there an economic solution to this issue or is it a throwaway?

    Hello.
    Once my iMac G5 experienced this blue tint problem.
    The solution was to:
    Open System Preference > Display.
    Click on the highest resolution.
    Close Display pane.
    Close System Preference.
    Hope this helps.

  • In safari video is not working for a ipcam

    in safari video is not working for a ipcam

    For an iOS device ?  >>   https://itunes.apple.com/us/app/ip-cam/id333208495?mt=8
    If so, check out the app developer's site for support >  http://www.senstic.com/iphone/ipcam/ipcam.aspx

  • KT4VL video issue

    New motherboard/chip/memory/HDD in previous case with previous video card.  No other cards installed.
    I get to the WinXP setup screen fine, and choose to format the HDD in NTFS, but then the screen flashes and I get "synch out of range" on the monitor.  I tried XPhome as well as pro out of curiosity...I get the same "synch out of range" at various times.
    KT4VL
    Corsair 512MB PC400
    Athlon 2.1Ghz
    MSI-8855 GeForce2 ti-Pro (4x AGP)
    CD burner, CD reader and 80GB HDD installed
    PSU is 300 or 350 I believe
    no other cards or devices yet
    I made sure to keep all BIOS settings at safe/default levels while doing initial install.  Cannot get past the video issue, and I have never seen it before.  Any ideas?

    Sorry...its a Samsung 19" Synchmaster...about 6 months old.
    It was fine with the old system, as was the video card itself.  I carried them both over from my previous "guts"...an MSI KT2proRaid I think, with Athlon 800.
    Initial video signal is fine, and as far as I know it shouldn't switch from basic VGA to hi-resolution until it actually gets into XP.  It's nowehere CLOSE to that point when it is in the blue XP setup screens which makes it puzzling.

  • MacBook Pro 2011 Repair Extension Program for Video Issues -Feedback?

    Anybody have any feedback from the MacBook Pro 2011 Repair Extension Program for Video Issues?
    I had my early 2011 15 inch 8,2 repaired (free) under the extension program. The machine now appears to run well - but much hotter than before. The case is significantly hotter - especially at the GPU corner and the fans are constantly on moderate to high (not full). Anybody else experiencing similar changes?

    Run an Apple Hardware Test;
    https://support.apple.com/en-us/HT201257
    Note an error free AHT is not definitive.
    install iStat menus:
    http://bjango.com/mac/istatmenus/
    Set Activity Monitor to ALL PROCESSES and set CPU to display values from high to low.
    When the MBP gets hot, post images of both for inspection.
    Ciao.

  • Lightroom 4.4 video issues, I think it may be a windows 8 issue.

    I am not sure when this started happening or what has changed.  I went to import some video and in the import dialog box all my video files show "Preview unavailable for this file" in the thumbnail in the grid view.  And if I try to import them i get a dialog box with a message that says Import Results > Some import operations were not performed. > There is a problem with the video file (1) > [Filename].AVI
    I am currently using windows 8 and I have imported video to this catalog before from the same camera.  The video plays fine in the video players(windows media player, quicktime, and the new video app on windows 8 that is the default player in the OS).
    I went throught the http://helpx.adobe.com/lightroom/kb/troubleshoot-video-issues-lightroo m-4.html and did all those suggestions.  I am now turning to the forums before I reach out to support.
    Has anyone else run into this issue or a simililar one that may be able to give me a workaround or solution?
    I am a cloud subscriber and all my programs are up to date.  Windows is current, all players are current, and this specific catalog has .AVI files in it from the same camera and the firmware on the camera has never been updated since I started shooting video.
    Thanks,
    Alex

    I had the same problem -- also on Windows 8. I was trying to import .MOV files from an Olympus OM-D E-M5 into Lightroom and got the error you mentioned.
    I believe it was a problem with my QuickTime installation. I was using an unofficial distribution of QuickTime called "QT Lite", and apparently it doesn't play well with Lightroom. Uninstalled that, installed the latest QuickTime and video imports started to work.
    Unfortunately I then ran into this other problem, which sometimes causes video editing to fail: http://forums.adobe.com/thread/972420

  • Safari ios7 issues on iPad Air - can't open new tabs - + sign closes app

    Safari ios7 issues on iPad Air - can't open new tabs or view other tabs.
    The + sign just closes the app every single time!
    In some cases, the back and forward buttons don't work.
    It's driving me crazy becuase if the webpage I'm on opens and ad or tab that I don't want to look at, I can't close it and go back, I have to retype the web address in and find where I was on the site!

    I, too, tried all the fixes...nothing worked.
    Found another thread on this forum and looks like a lot of us are having same problem.
    Next time it happens, go to SETTINGS/GENERAL/ABOUT and check to see it there is a "low memory" incident report.
    If there is:
    See the discussion thread "iPad Air Low Memory Crashes".
    Seems to be common....this could turn into a HUGH issue.

  • Safari Browser issue on Mac with crystal report viewer JSP

    Safari Browser issue with crystal report viewer JSP
    This is my configuration:
    Operating System : Mac X
    Browser : Safari Browser 3.1.4
    Crystal Report : XII Release 2
    Application Server : Jboss 4.2.0
    I am using the following code to view the crystal report in jsp.
    <%@ page import="com.crystaldecisions.report.web.viewer.*" %>
    <%@ page import="com.crystaldecisions.sdk.occa.report.application.ReportClientDocument" %>
    <%@ page import="com.crystaldecisions.sdk.occa.report.reportsource.IReportSource" %>
    CrystalReportViewer theViewer = null;
    ReportClientDocument document = null;
    IReportSource reportSource = null;
    theViewer = new CrystalReportViewer();
    reportSource = document.getReportSource();
    reportSource.refresh();
    theViewer.setReportSource(reportSource);
    theViewer.setOwnPage(true);
    theViewer.setHasExportButton(true);
    theViewer.setHasPrintButton(true);
    theViewer.setHasRefreshButton(true);
    theViewer.setHasLogo(false);
    theViewer.setEnableParameterPrompt(true);
    theViewer.refresh();
    theViewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
    theViewer.dispose();This code is working fine when the browser is IE or Firefox on Mac X.
    But it is giving me error message when the browser is Safari on Mac X.
    If there is no parameter in the report then the error message is:
    Null Totaller
    If there is parameter in the report then the error message is:
    Parameter prompting is not supported
    Please Help.
    Thanks
    Edited by: VINCEJOHNSON on Jul 30, 2008 7:11 AM

    I am having this exact same issue, only on an ASP.NET page. I can print the report, but it does not display at all.

Maybe you are looking for