Safari vs. Router

Recently Safari (IE also) has failed to load pages. For example when I try to load apple.com the progress bar reaches from 75 to 95% and then stops. I can try to reload the page but it never finishes the load. In addition, when downloading files to the desktop, just before completion they magically dissappear only to reappeaar complete and mounted after a reboot.
At first I thought it was just Safari, so I tried IE with the same results. Then I thought it was my AE card. I got the same results using the ethernet cable.
Which brings me to how I can even access this site. Im using my neighbors signal. Which low and behold works just dandy.
Next I powered down and reset both my cable modem and Netgear MR814v2 hoping that would solve the problem. Nope still cant get pages to load which leaves me with two possibilties, faulty hardware, or my ISP is playing practical jokes.
Any help would be appreciated.

I experience a problem with the router:
If i connect to internet via the router (Belkin wireless 11.g) my downloads (web pages and files) stop after a few Kbytes. This happens both for wired connections and wireless connection.
If I connect straight to the modem via Ethernet, the problem disappear.
This problem started a couple of months ago. Before everythong was working fine.
The only change in the system since then is the installation of eMule.
Any help???

Similar Messages

  • Why no internet access after Safari reinstallation (router does)?

    Since yesterday I have a massive problem I hope someone can help me out.
    To start with I couldn´t email attachments since a few months. Yesterday I thought a re-installation of Safari (browser recommended by the provider) might cure that as I thought recent upgrades (recommended by apple to install) caused that problem which was not there last year.
    So I downloaded Safari from apple.com. From that on I can´t get any internet access anymore (only a few minutes after the first start, then never again), even after spending 40 minutes on my providers extremely expensive hotline no solution (other than that the friendly lady told me to contact this forum). My router has internet access, and the cable between router and my Mac is definetely fine, but when I open the internet-access window, the connection immiadetely crashes always.
    I checked network utilities and found no failure, I tried different ways of access via the network settings, nothing works. I assume it has something to do with the re-installation of Safari, but why on earth should the standard Safari 1.2-version from Apples own website create such a mess?
    Shall I install firefox? Shall I dump the Safari-version installed yesterday and install a copy of the updated version from my office computer instead? What else could cause the problem? Are my network settings wrong? Should I log in via "manual" or DHCP (the provoders hotline told me I should re-type PPP settings. Though that is clearly to see a no-option with Ethernet she kept telling me so. Isn´t PPP only for modem-connection?), or via PPoE? Or shall I re-install the router?
    I would be more than glad if someone could help me.
    I-Mac 20"   Mac OS X (10.3.2)  
    I-Mac 20"   Mac OS X (10.3.2)  

    We can keep it in English as its an english speaking forum and therefore non-germans who might have the same problem could participate. If for you German is better I´m fine with it. Most settings on my Mac are in German so if it becomes too specific, german is anyway necessary.
    Thanks,
    Nobbi

  • Safari "Top Sites" and Belkin wireless router

    Have been experiencing a problem with Safari / Belkin router for the past 3 days. I have noticed it occurs most often when using the "top sites" function of Safari. It seems that whenever I use top sites it causes a disconnect between my macbook and the belkin wireless router. My computer becomes disconnected from the router, even though the router continues to function as normal.
    In tandem, a parallel problem which may be related:
    In past three days I have been receiving constant floating window prompt to enter my Gmail info to "update RSS feed... password will be sent in clear text... etc." while using Safari. I have read other threads on this issue and some people attribute it to the top sites function, since updating Safari to the latest version.
    Anyone else having the same issue with their wireless router when using the top sites function of Safari? To reiterate - the connection seems only to be lost when clicking on a top site in a new tab or window.
    Thanks for all replies!

    HI,
    Try Safari Maintenance and see if that makes a difference.
    Also, I just saw this post... might help you. http://discussions.apple.com/thread.jspa?threadID=2182985&tstart=0
    Carolyn

  • Glims and Safari 5

    Safari 5 seems to have broken Glims. Has anyone got the latest version of Glims 1b24, working with Safari 5?

    Hi
    The restore tabs feature has been very buggy for some time now (at least as far back as Safari 4.0.3). Glad Safari 5 lit a fire under their (censored - ). On the restore, usually, multiple tabs appear as "untitled", or are duplicated.
    In the bigger picture, I hope Glims follows the Safari extension route that Apple just released to developers. Ought to make for a much more congruent approach to Browser alterations and enhancements.

  • Problem with macbook connecting to wireless: help please

    thanks for reading this thread.
    i have a linksys WRT54G2 router connected straight from the ethernet port of a cable internet connection. it's been working fine for the past month or two for both me (using macbook 10.5.6), my flatmate (running vista pc) and my girlfriend also running a macbook.
    but, the last few days i've been having problems getting connected. which are:
    not connecting to wireless network automatically, and asking for password which is already remembered in keychain
    getting connection timeout when trying to connect
    getting invalid password, even though password is correct
    websites taking around 2 mins to load when connection is eventually made
    the internet is working fine on both my flatmates and girlfriends computers, but jut doesn't seem to like mine. heres what i've done already:
    restored router to factory settings and updated with latest firmware
    cleared all known wireless networks within network preferences
    tried both firefox and safari
    accessed router using IP address and loaded pages instantly
    works fine connected to router with an ethernet cable
    the only thing i havn't tried is a different wireless network, which i'm going to try tomorrow when i go into university.
    has anyone any idea what the problem may be? like i said, its been working fine for the past 2 months but has just decided it doesn't like my macbook.
    any help or suggestions would be great, thanks alot

    I had the same problem as you. It all started when all of a sudden my macbook wouldnt automatically join my home wifi that is usually does. I ignored this issue because it still worked, and this persisted for a few months. After a while, the situation got worse and after waking up from sleep, my wifi signal would go strong at first, then weaken until it kicks me off, and i no longer could reconnect as I would get a connection timeout error. I just went to the apple store and they replaced the airport card for free for me.
    So basically your airport card is slowly dieing, replacement is inevitable.

  • Satelitte P200-1BA - Internet browser activity stops

    Hello,
    I have a big problem with internet activity on WLAN connection.
    Configuration:
    Comp: Satelitte P200-1BA .
    System: Vista Home Premium OEM with SP1 and last upgrades.
    Internet Browsers: Mozilla Firefox, IE, Safari.
    Router: FRITZ Box 7050.
    Communicators: Skype, Gadu-gadu
    Problem description:
    After system booting - WLAN internet connection start automaticaly in next step commumicators are starting.
    When I open any of my internet browsers - I can work with this browser only 5-20 min. After this time my browser activity stops.
    I can't use any other browser - web pages are not loading. But - commmunicator Gadu-Gadu - still works properly.
    I can start & stop communicator activity many time - and communicator still is OK.
    But not browser - browser is hanging up.
    I have to system reboot - this is the only way I can using again my browser and see any www pages.
    I know that:
    - i've tested dns - writtening IP in adres field in browser - does'nt work
    - there are different ports 80-browsers, 8080(?) communicator - maybe vista blocks any ports?
    - in command mode - adres pinging - without problems
    - in command mode ipconfig /renew - without effects
    - different toshiba - with windows XP - works properly and correctly
    - mail program (outlook) is working properly
    - after vista reinstallation - problem is back
    Please, help.

    Hi
    You are using the WLan but did you notice the same using the LAN?
    According to your posting the chat applications like gadu-gadu and Skype are automatically loading in the OS background.
    In your case I would test if the IE and other internet browsers would hang without usig and loading gadu gadu and Skype.
    Furthermore if this issue appears only using the WLan then you should update the WLan driver and should also check if the BIOS is up to date.
    Sorry for this frugal proposal but as you probably know, its not really easy to say what causes this strange issue
    Greets

  • Stuck at "accessing itunes store" have tried all suggestions so far and nothing has worked..

    when i open itunes i am infinetly stuck at "accessing itunes store" during which it will not allow me to authorize my computer, sign in, etc. . So far i have tried restarting my computer, cmd command, re-install, unistall qucik time player/safari, reset router. i am not sure what else there is to do for this problem. none of the other threads have helped me at all. what else is there to do to fix this?

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • My iPhone 5c won't connect to home internet. I have an Actiontec router and my phone shows that I'm connected but no IP address comes up on my phone and Safari and other Apps state that I'm not connected to the internet.

    I recently purchased an iPhone 5c and for some unknown reason I can't connect to my wireless router's network at home. I've tried establishing a seperate IP address, manually adding the iPhone device, and even spent an hour with Centurylink's IT support and they couldn't figure it out. They said it was an iPhone error. I had an iPhone 3 about 1 1/2 years ago that had the same problem. I ended up getting rid of the phone because I couldn't solve this problem before. I thought a newer phone would not have the same problem.
    My phone shows that I'm connected to my home internet, but when I open up network information for my home internet there is no IP Address listed. Safari and my other apps also state that I'm not connected to the internet. I'm ready to sell my phone back and go to an Android since I didn't have trouble connecting with it before. We also have a Macbook and iPad that both connect to the internet just fine. Please....oh please help.

    I was having the same problem; I tried all the recommended fixes in the "more like this" and nothing worked, but finally found the answer.  Try this: http://themiddleofthestreet.blogspot.com/2013/11/if-your-iphone-5s-wont-connect- to-wifi.html

  • When I use the shortcut to open a new window in safari (command N), I get a 404 error message from Google. How do I change where 'Command N' routes to?

    When I use the shortcut to open a new window in safari (command N) on my Macbook Pro, I get a 404 error message from Google. How do I change where 'Command N' routes to? 

    It's not necessary to change the Command N keystroke..
    From your Safari menu bar click Safari > Preferences then select the Privacy tab.
    Click:   Remove All Website Data
    Then delete the cache.
    Open a Finder window. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following
    ~/Library/Caches/com.apple.Safari/Cache.db
    Click Go then move the Cache.db file to the Trash.
    Quit and relaunch Safari to test.
    If that didn't help, troubleshoot Safari extensions.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

  • My ipad2  appears to be connected to the internet, but I cannot connect..I keep getting Safari cannot open the page because it is not connected to the internet....I restarted the router and the ipad still no connection...my service is working properly

    My ipad 2 appears to be connected to the internet(all bars are up in the left hand corner).....yet I cannot connect to the internet(Safari cannot connect open the page because it is not connected to the internet)
    I unplugged my router for 30 seconds and restarted my ipad...still nothing
    I really don't think it is my service because my laptop works fine...as I am using the internet right now
    I only had this ipad for 2 days
    Are there any suggestions that can help solve this problem?

    Usually it's because you are not making internet connection via wifi.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • My ipod touch 1st gen says its connected to wifi, but when i go on safari it stops at "connecting" with a grey screen, what should i do, my router is fine, cause my brothers iphone 4th gen works, but my ipod touch 1st gen dosen't?

    yes, so i connect to my wifi at home, my brothers iphone works fine, but my ipod touch 1st gen dosent conect. it connects but when i go on safari it dosent work, it says" connecting" with the circle loading thing. plz help< o and my router is fine because my brothers iphone works great, ive tried restoring and reseting networks, and ive also tried forgetting the network, my ipod touch 1st gen is out of its warranty, so what can i do?

    Try restarting your router by removing power to it for 30 seconds. This may correct the problem.

  • I can no longer login to my router web interface from Safari on iPad.

    I made a mistake today. After accidentally opening up the web interface login screen to my router in Safari, I just pressed cancel in the login box. Since then, Safari just hangs on 192.168.0.1 when I want to access the router and the login box no longer appears. I can still login via the Terra browser on the same iPad. I would really appreciate any guidance as to how to undo whatever setting I have changed. I have tried clearing cache/cookies/history. Thanks.
    Edit: Could I have refused a permission to access in some way? I am now wondering if in my haste, I may have mistaken a permission box for the login box. Is there somewhere in the settings I could check if I have refused a permission? Thanks again.

    there should be an X on the right side of each tab. clicking on it should close that tab

  • Can't find any discussions on this.  Suddenly cannot stream video in Safari or Chrome on my iPad 2.  The error is "The operation could not be completed."  Rebooted cable modem and router, no luck.  No problem with my PC.  Help!

    Suddenly I cannot stream video on my iPad 2.  I get the error, "The operation cannot be completed."  The browser (Safari or Chrome) continues to try to load the video with no result.  I have no problem streaming on my WIndows PC (laptop) using the same WiFi router (Netgear dual band) connected to my Comcast/Xfinity cable modem.  I have tried renewing my lease, clearing apps out of memory and rebootng the iPad, still no luck.  (How do you do a "hard reset", I forgot?)  Frustrating since I don't own a TV and am an Al Jazeera addict!  Help!

    Suddenly I cannot stream video on my iPad 2.  I get the error, "The operation cannot be completed."  The browser (Safari or Chrome) continues to try to load the video with no result.  I have no problem streaming on my WIndows PC (laptop) using the same WiFi router (Netgear dual band) connected to my Comcast/Xfinity cable modem.  I have tried renewing my lease, clearing apps out of memory and rebootng the iPad, still no luck.  (How do you do a "hard reset", I forgot?)  Frustrating since I don't own a TV and am an Al Jazeera addict!  Help!

  • TS1398 Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation sam

    Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation same. Tried reboot, renew lease, forget network, reset network setting. Pls advice

    Have you tried a simple reset of your iPod to see if that helps?  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    Otherwise, have you tried any of the troubleshooting mentioned in this Apple support document?
    iOS: Troubleshooting Wi-Fi networks and connections
    B-rock

  • 10.4.9 update / router & safari problem

    Following the update, which went smoothly my internet connection slowed to dial up speed from 3MB. When I bypass the router speed to back to 3MB. But safari shows no images only text / Firefox works fine. I've reset the router updated the firmware, powered modem, router, computer off and cycled on in recommended sequence with no change. Update 10.4.9 appears to have conflicted with the router D-Link DI-604. I checked D-Link's site and found no info (put in a help request). Does anyone have any recommendations or suggestions? Has anyone had a similar problem post update?
    iMac (intel)   Mac OS X (10.4.9)  

    Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list.
    Turn OFF all the network port configurations except the one needed to connect to Internet and see whether that makes a difference -- if it doesn’t, turn ON again the ones you want enabled.

  • I have a new ipad2, also an ipad1, with a gateway laptop. I have wireless router with windstream. Able to access my wireless connection on ipad1 and laptop, but can't on ipad2. Will say connected, but get message saying not connected to internet on Safari

    I got an ipad 2 today. Already have an ipad 1 and gateway laptop. Have wireless internet with windstream. I have internet connection on ipad 1 and laptop, but can't connect to internet on ipad2. It says i'm connected, but when accessing Safari, it says not connected to internet. Tried unplugging router and resetting already, still not working. Thanks for the help.

    Thank you for your response.
    I did try turning off the firewall, and reducing all the security levels to a minimum (under Control Panel>Internet Options). Also, I'm using a direct cable from my m/c to the Airport Extreme. But nothing helps. Due to the usage pattern in my family, using the MacBook for configuring the network is not optimal, hence my struggle to do it on my Windows desktop. But if that is the only way to go I suppose I'll have to.
    Subsequent to posting my query, I discovered that Apple had not singled me out, and many others with a Win OS face this problem, too. I would have thought Apple would do a proper job of testing before putting up the Windows version of Airport Utlity on their site.
    But thanks again. Much appreciate it.

Maybe you are looking for

  • Music videos show the wrong artist

    hi over the years I have purchased videos on I-tunes. somehow the video stills don't match the song titles (pic attached). What has happened and what do I need to do to fix it ?

  • Cannot Activate my BT Netprotect Plus

    Hi I am having problems activating my BT Netprotect Plus security package. I have the Option 3 package and therefore should get this security as part of my package. The software os telling me that I need to activate the security by 13/01/2012. Howeve

  • My skype number is already being used by another b...

    I just bought a Skype number and minutes.  When I call the number, I hear a greeting for a local business here in town.   Has it been provisioned correctly?

  • Controlling the frame of a mask?

    Hi gang, I have to do a bunch of masks on still portraits.  I need each portrait to be the same frame size.  I want to use masks to standardize the frame size.  In FCPX I could use the 'Crop', which is okay.  But as I was experiment with the 'mask' I

  • Getting slapd to dump core when installed as a non-root users on linux

    Doesn anyone know how to allow slapd do dump core when running on linux(redhat as4) while being installed as a non-root user? I have tried the normal route of setting core to unlimited and that user to unlimited also in limits.conf. I can do a kill -