Safari waits for external drives to spin before showing content (chrome does not)

Why? And more importantly how to stop that? I think it's always been that way but since installing lion i decided to switch back to safari over chrome because i like the trackpad gestures. Chrome loads content regardless of external drives powered down or not.
Same stupid behaviour with the dictionary... Why on earth does the dictionary need to spin up all my external drives to give me a definition?
I like the new features but not as much as reading content from any Apple app immediatly.

This must be a bug, because I'm observing the exact same behavior. Lion thinks it needs to spin up the external drives for the same reasons, and sometimes before displaying a dialog box.

Similar Messages

I have 2 external hard drives, but can not view photos from 1 hard drive in LR5 now. I used this hard drive in LR5 before, but now it does not show up. How do I get the hard drive to show up in LR5?

Any ideas on how to connect hard drive back into LR5?

Hi:
Let's see if I can help you, help me. Operating system is OS X, version 10.8.5.
The photos on hard drive (1) have never been removed from Lightroom (or have they?)They have not been removed from LR.
Could you explain why hard drive (1) stopped appearing in Lightroom, it must have been because you did something, otherwise the photos on hard drive (1) will still appear there.LR always worked great, until I had to upgrade my operating system to get LR5 to work. Then it has been one problem after another.
So, once I ran into this problem and before we started to chat….I simply RE-imported all the photos from (1). They came in fine, except none of their key words came along with them. So my ability to find anything is "0". It was bad enough to have to do the import all over, but the thought of having to re-tag 1000"s of images is overwhelming.
Thanks for your patience.
Kathy

[Solved] Wait for external usb disk before mounting partition

Hello,
I have a fresh setup where 3 btrfs subvolumes are supposed to be mounted on /var /home and /opt. Those subvolumes are on an external usb drive (root fs is on a sd card).
During boot, systemd tries to mount /var first but encounter "var not empty, mounting anyway" (probably due to several boot attempts) and then "special device uUID=12f15a3e-cf5c-4bc2-9475-6b4686a30f90 does not exist" where 12f15a3e-cf5c-4bc2-9475-6b4686a30f90 is the correct id of the drive.
From journactl extract it seems that usb drive is not ready yet when /var is being mounted.
Is there a way to make systemd wait for "the disk is ready" before trying to mount /var ?
Information:
- mounting /var in rescue mode works perfectly (mount -o subvol=var /dev/sda /var)
- device is a raspberry but I think it has no link to the issue (except maybe being slow to send power to usb)
- the usb drive is behind a 4 port usb hub (externally powered)
- the usb drive indeed take some time to be powered up
- /home and /opt are mounted in rescue mode automatically a few seconds later
journatctl wrote:Jan 01 01:00:07 capodimonte systemd[1]: Starting Local File Systems (Pre).
Jan 01 01:00:07 capodimonte systemd[1]: Reached target Local File Systems (Pre).
Jan 01 01:00:07 capodimonte systemd[1]: Mounting /var...
Jan 01 01:00:07 capodimonte systemd[1]: var.mount: Directory /var to mount over is not empty, mounting anyway.
Jan 01 01:00:07 capodimonte systemd-udevd[138]: starting version 218
Jan 01 01:00:07 capodimonte mount[139]: mount: special device uUID=12f15a3e-cf5c-4bc2-9475-6b4686a30f90 does not exist
Jan 01 01:00:07 capodimonte kernel: scsi 0:0:0:0: Direct-Access Inateck 0001 PQ: 0 ANSI: 6
Jan 01 01:00:07 capodimonte kernel: sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
Jan 01 01:00:07 capodimonte kernel: sd 0:0:0:0: [sda] Write Protect is off
Jan 01 01:00:07 capodimonte systemd[1]: var.mount mount process exited, code=exited status=32
Jan 01 01:00:07 capodimonte kernel: sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
Jan 01 01:00:07 capodimonte kernel: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Jan 01 01:00:07 capodimonte systemd[1]: Failed to mount /var.
Jan 01 01:00:09 capodimonte kernel: sda: unknown partition table
Jan 01 01:00:09 capodimonte kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Jan 01 01:00:09 capodimonte kernel: random: nonblocking pool is initialized
Jan 01 01:00:09 capodimonte kernel: BTRFS: device label external_hdd devid 1 transid 24 /dev/sda
Jan 01 01:00:09 capodimonte systemd[1]: Found device NS1066 external_hdd.
Jan 01 01:00:09 capodimonte systemd[1]: Mounting /home...
Jan 01 01:00:09 capodimonte systemd[1]: Mounting /opt...
Jan 01 01:00:09 capodimonte kernel: BTRFS info (device sda): enabling auto defrag
Jan 01 01:00:09 capodimonte kernel: BTRFS info (device sda): disk space caching is enabled
Jan 01 01:00:09 capodimonte kernel: BTRFS: has skinny extents
Jan 01 01:00:09 capodimonte systemd[1]: Mounted /home.
Jan 01 01:00:09 capodimonte systemd[1]: Mounted /opt.
Jan 01 01:00:09 capodimonte systemd[1]: Startup finished in 5.088s (kernel) + 4.607s (userspace) = 9.696s.
My fstab:
# /dev/mmcblk0p3
UUID=4660fa0a-bcf6-4d83-b956-d7bf9df222b9 / ext4 rw,relatime,data=ordered 0 1
# /dev/sda LABEL=external_hdd
UUID=12f15a3e-cf5c-4bc2-9475-6b4686a30f90 /home btrfs rw,relatime,space_cache,noatime,compress=lzo,autodefrag,subvol=home 0 0
# /dev/sda LABEL=external_hdd
uUID=12f15a3e-cf5c-4bc2-9475-6b4686a30f90 /var btrfs rw,relatime,space_cache,noatime,compress=lzo,autodefrag,x-systemd.device-timeout=30s,subvol=var 0 0
# /dev/sda LABEL=external_hdd
UUID=12f15a3e-cf5c-4bc2-9475-6b4686a30f90 /opt btrfs rw,relatime,space_cache,noatime,compress=lzo,autodefrag,subvol=opt 0 0
# /dev/mmcblk0p1
UUID=95DB-C13B /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro 0 2
Last edited by kamaradclimber (2015-03-12 19:25:40)

Thanks for your reply.
I don't see any btrfs subvolume information in /dev.
Here is the var.mount config:
systemctl show var.mount wrote:Where=/var
What=/dev/sda
Options=rw,relatime,compress=lzo,space_cache,autodefrag
Type=btrfs
TimeoutUSec=1min 30s
ControlPID=0
DirectoryMode=0755
SloppyOptions=no
Result=exit-code
ExecMount={ path=/bin/mount ; argv[]=/bin/mount -n uUID=12f15a3e-cf5c-4bc2-9475-6b4686a30f90 /var -t btrfs -o rw,relatime,space_cache,noatime,compress=lzo,autodefrag,subvol=var ; ignore_errors=no ; start_time=[Thu 1970-01-01 01:00:07 CET] ; stop_time=[Thu 1970-01-01 01:00:07 CET] ; pid=141 ; code=exited ; status=32 }
Slice=system.slice
ControlGroup=/system.slice/var.mount
Delegate=no
CPUAccounting=no
CPUShares=18446744073709551615
StartupCPUShares=18446744073709551615
CPUQuotaPerSecUSec=infinity
BlockIOAccounting=no
BlockIOWeight=18446744073709551615
StartupBlockIOWeight=18446744073709551615
MemoryAccounting=no
MemoryLimit=18446744073709551615
DevicePolicy=auto
UMask=0022
LimitCPU=18446744073709551615
LimitFSIZE=18446744073709551615
LimitDATA=18446744073709551615
LimitSTACK=18446744073709551615
LimitCORE=18446744073709551615
LimitRSS=18446744073709551615
LimitNOFILE=4096
LimitAS=18446744073709551615
LimitNPROC=7329
LimitMEMLOCK=65536
LimitLOCKS=18446744073709551615
LimitSIGPENDING=7329
LimitMSGQUEUE=819200
LimitNICE=0
LimitRTPRIO=0
LimitRTTIME=18446744073709551615
OOMScoreAdjust=0
Nice=0
IOScheduling=0
CPUSchedulingPolicy=0
CPUSchedulingPriority=0
TimerSlackNSec=50000
CPUSchedulingResetOnFork=no
NonBlocking=no
StandardInput=null
StandardOutput=journal
StandardError=inherit
TTYReset=no
TTYVHangup=no
TTYVTDisallocate=no
SyslogPriority=30
SyslogLevelPrefix=yes
SecureBits=0
CapabilityBoundingSet=18446744073709551615
MountFlags=0
PrivateTmp=no
PrivateNetwork=no
PrivateDevices=no
ProtectHome=no
ProtectSystem=no
SameProcessGroup=yes
IgnoreSIGPIPE=yes
NoNewPrivileges=no
SystemCallErrorNumber=0
RuntimeDirectoryMode=0755
KillMode=control-group
KillSignal=15
SendSIGKILL=yes
SendSIGHUP=no
Id=var.mount
Names=var.mount
Requires=-.mount
Wants=system.slice
RequiredBy=systemd-journal-flush.service man-db.service shadow.timer man-db.timer local-fs.target systemd-random-seed.service logrotate.timer systemd-update-utmp.service
Conflicts=umount.target
Before=systemd-journal-flush.service man-db.service shadow.timer man-db.timer local-fs.target systemd-random-seed.service logrotate.timer systemd-update-utmp.service umount.target
After=local-fs-pre.target -.mount systemd-journald.socket system.slice
RequiresMountsFor=/
Documentation=man:fstab(5) man:systemd-fstab-generator(8)
Description=/var
LoadState=loaded
ActiveState=active
SubState=mounted
FragmentPath=/run/systemd/generator/var.mount
SourcePath=/etc/fstab
UnitFilePreset=disabled
InactiveExitTimestamp=Thu 1970-01-01 01:01:11 CET
InactiveExitTimestampMonotonic=71204114
ActiveEnterTimestamp=Thu 1970-01-01 01:01:11 CET
ActiveEnterTimestampMonotonic=71204114
ActiveExitTimestampMonotonic=0
InactiveEnterTimestamp=Thu 1970-01-01 01:00:07 CET
InactiveEnterTimestampMonotonic=7409499
CanStart=yes
CanStop=yes
CanReload=yes
CanIsolate=no
StopWhenUnneeded=no
RefuseManualStart=no
RefuseManualStop=no
AllowIsolate=no
DefaultDependencies=yes
OnFailureJobMode=replace
IgnoreOnIsolate=yes
IgnoreOnSnapshot=no
NeedDaemonReload=no
JobTimeoutUSec=0
JobTimeoutAction=none
ConditionResult=yes
AssertResult=yes
ConditionTimestamp=Thu 1970-01-01 01:00:07 CET
ConditionTimestampMonotonic=7365732
AssertTimestamp=Thu 1970-01-01 01:00:07 CET
AssertTimestampMonotonic=7365738
Transient=no

Disk Utility "waiting for the drive"

I'll be calling Applecare on this, but would like to know if anyone else has experienced this problem:
I have a 2 month old MBP with the following model Super Drive:
HL-DT-ST DVDRW GSA-S10N (according to System Profiler, it can write to all formats including -R, +R, DL). From another thread, I assume this is an LG?
I decided to test the drive - made a short 40 second movie and created a disk image. Upon opening Disk Utility and inserting a DVD (Verbatim +R), I got the following: "waiting for the drive" for 5 minutes. Ejected the disk and tried again - same result.
On the third try, it actually recognized the DVD, but only gave me the option to burn at 4x or 8x. I usually burn at the slowest speed available (2x), so I cancelled, ejected the disk and tried again. Fourth and fifth tries: no action, just "waiting for the drive".
I then tried to use Toast with the Super Drive; before inserting the disk, I set Toast to burn at 2x, but once I inserted the disk, Toast recognized it, but changed the available burn options to 4x or 8x.
Next I connected my external burner and got the options to burn at 2.4x, 4x, or 8x both in Disk Utility and Toast.
I then used the same disk on my iMac; tried both the Super Drive and my external burner (using both Disk Utility and Toast with both) and got the following burn options:
iMac Super Drive/Disk Utility: 2.4x, 4x, 8x
iMac/external burner/Toast: 2x, 4x, 6x, 8x
There seem to be a couple of issues:
The "waiting for the drive" problem (what could possibly cause this?)
The "non-availability" of a slow burn speed of the Super Drive
And a third problem: this DVD drive is the slowest I've ever experienced; it took 50 seconds for the icon to appear on the desktop after inserting the DVD vs. 7 seconds on the iMac (this is the DVD I burned using Toast/exterbal burner,testing it on a TV and the iMac). It played fine on all three.
Has anyone encountered a similar "waiting for the drive" issue and/or the fact that this drive takes a very long time to recognize/read a DVD?
Appreciate any input!

I spoke with a product specialist at Apple and it was agreed that we'd wait to see if the problem persisted; at that time, we'd talk about getting the drive replaced.

How to prevent external drive from spinning up? Or, fastest quiet drive on spin up?

My external drive insists on spinning up often without reason, often for open/save dialog boxes. The spin up takes time and the computer is inoperable until it completes the spin up. As a fast touch typist, who often hits command-s to save documents in Word, this is really a nuisance. This happens with a USB and Firewire external drives. It seems to be a feature within the OS itself--and likely some other programs in the background--that want to access drives.
Is there any way of turning this behavior off? For example, telling the OS to spin up the external hard drive only for a specific application (Carbon Copy Cloner). So far, the only solution I've come up with is to eject the external drives, which isn't much of a solution if one wants automatic back ups!
Now, if there is no way of turning this off, are there drives that spin up quickly? This USB drive I have takes forever compared to the Firewire one, which also takes too long. At the same time, though, the USB drive has the blessing of running silently whereas the various Firewire drives I've had are noisy (with high pitched hums) even when idle. (I realize that the noise has more to do with the enclosures, fans, heat sink, etc.)
Quiet matters most, so if necessary, I'll just keep the external drives disconnected.

In the Energy Saver pane of System Preferences, make sure "Put the hard disk(s) to sleep when possible" is not checked. This will keep your external drives spinning, so you won't be delayed waiting for them to spin up.
"I realize that the noise has more to do with the enclosures, fans, heat sink, etc."
Yes, many if not most enclosures amplify whatever noise the drive inside makes. Your desk or table may also serve as a sounding board for your drives. Setting them on something that absorbs the vibration can help, as long as you don't obstruct any cooling air intakes or outlets.
Right now, your external drives are spinning up whenever the OS is asked to display all the possible places for things to be found or stored. I don't know of any way to limit that behavior other than unmounting the disks you don't want displayed.
Spinup time is generally shorter for 2.5" drives than for the much heavier 3.5" drives — there's just less inertia to overcome as things get moving. And 2.5" drives can also be quieter, because less mass is spinning and any tiny imbalance that might cause extra vibration is correspondingly less significant.

Burning a dvd ... "waiting for the drive" ??

after choosing the file i want burn, i hit the "burn" button and a drop down window tells me that it's "waiting for the drive"... i've never seen this before. what gives?

No offence, but did you remember to insert a blank CD or DVD?

MAX timed out while waiting for a driver

I am getting an error when starting MAX. the error is that MAX timed out while waiting for a driver (nidaqe plug-in). I have a PCI-GPIB card and an PCI-MXI-2 card in the PC. The operating system is Windows XP.
I am able to see both these cards under the Windows Device Manager>Hardware.
MAX version is 4.6.1f0
I have also installed NI-488.2 and NIVXI331 driver installed on the computer.
Any help will be appreciated.
Thank you.
vxiguy

Hi vxi_guy,
What you're seeing could be the result of a few different things. First, I would check to see if the NI Configuration Manger and NI Device Loader are running, as per this KB. Then, if that doesn't work, I would explore the solutions described in this KB. Please let me know if neither of those articles resolve the issue. Have a good one!
aNItaB
Applications Engineer
National Instruments
Digital Multimeters

Broker wait for all receiver to acknowledge before returning from publish()

Does the broker wait for all receiver to acknowledge before returning from publish()?
If suppose i had 10 subscribers. I observerd 10th subscriber getting message late. I thought publisher will wait for acknolodge for each subscriber ? else why it getting message late ?

I assume you are questioning why the subscriber's onMessage() is getting
called way after the publisher's publish() had returned.
The JMS publishers only know that it is sending msgs to a destination.
Whether there are 0 or 100 subscribers to the destination is something it
doesn't know or care about.
The message is sent to a destination on the broker first and then it is
delivered to the subscribers of the destination.
The publisher's publish() method will not return until the message has
been successfully delivered (and persisted if necessary) to the broker.
Note that this does not mean that the message has been successfully
received by any subscribers.

Mini - "Waiting for Disc Drive"

Attempting to copy some pictures from an SD card in a mac mini to a CD in the optical drive on an iMac.
Mac Mini says its waiting for the optical drive with a message ""Waiting for Disc Drive". It won't progess beyond this message.
I've tried to connect with a CD in the drive and no CD in the drive.
The iMac recognizes that the blank CD is loading.
Both computers can see each other across the network.
I have CD DVD drive sharing enabled on the iMac.
Any suggestions as to how I get the mac mini to see the drive/CD on the iMac?
Thanks.

Hi Richard,
I think the Problem might be you're trying to Copy to a CD instead of Burning them to a CD?
On the iMac you need a Burn Folder 1st to copy to...
http://support.apple.com/kb/PH4159?viewlocale=en_US

Do you have to wait for FCPX to Render 100% before sending to Compresssor?

Do you have to wait for FCPX to Render 100% before sending to Compresssor?
I don't quite understand how the process works. Is FCPX rendering the footage for me to see in the viewer or is it rendering the final output as well? I had always assumed compressor did the final rendering.
Thank you.

Your timeline needs to be rendered prior to compressor being able to encode your vision.
There are two processes here
1. Rendering, creating an effect, movement or some other piece of vision that requires rendering to provide playback at 100% of the project/time line specifications.
2. Encoding, converting your project/timeline from the editing codec, to a format suitable for delivery, eg, ProRes 422, to a web/DVD/iPhone friendly codec, eg h.264, mpg2 etc.
hope this helps.
Tony

Faxing does not work. Says it's waiting for the driver to connect.

I set up the bluetooth fax printer but when I click to send the fax, it says that it's waiting for the driver to connect.
Any ideas?

If you don't have a land line you can't fax without a system like eFax which uses e-mail to send faxes to a phone number. If you have a land line, you must tie up the land line to connect to another phone number to Fax to it.
You can probably also fax over VOIP based lines, but not all have a strong enough signal for faxing. Check with your VOIP carrier if you have one if Faxes are supported. Regardless, the Fax capability of any multifunction printer or scanner is only operable through an actual phone line. VOIP offers phone line to internet capability.

Can I disable trash for external drives?

Hello,
Is it possible to disable the Trash for external drives so that files from external drives are completey deleted automatically, or else moved to the trash on my internal hard drive? The problem that I am trying to solve is, for example, when I download pictures from my camera, if I want to make more space available on the camera, I have to first delete the pictures from the camera, and then empty my trash, since deleting the pictures from the camera only moves them to a hidden folder called ".Trash". I would prefer if I didn't have to empty the trash every time I wanted to free up room on my camera external hard drive.
Thanks very much,
Adrian
PowerBook G4 Mac OS X (10.4.1)

It isn't without its risks, but another option may be to ⌘-drag the files to the hard drive, which will simulate a "move" by copying the files to the hard drive then deleting them from the external. If something goes wrong during the transfer, it may be difficult in some situations to determine which files were being copied at the time - ie. which ones were potentially corrupted. It might be ok as a cleanup procedure after the files have been imported normally, but then you end up sitting through the process of copying them to the hard drive a second time - you might as well just toss them in the "Trash". Also, if a large number of files is involved, just don't accidentally drop them on the "Desktop" because the "Finder" can't handle it. Obviously, I'm not a fan of the method, but it's there as an option...

Is there a way to "force-mount" an external drive that doesn't show up on it's own when plugged in with firewire?

Hi, is there a way to "force-mount" an external drive that doesn't show up on the desktop? I have a new Hitachi SATA III 2 TB Ultrastar that won't show up like all the other drives when plugged in. So I can't partition, repair, format etc with Disk Utility, Disk Drill, Tech Tools etc. How do I make it visible?
I use the FW 400 to 800 adapter and a FW hub.
Thanks,
W.

ok, I did find the log in Diskutil of what happened, I just can't figure out why it happened and how to start over:
2014-04-20 13:42:08 -0400: Disk Utility started.
2014-04-20 13:44:30 -0400: Preparing to erase : “Terra 8”
2014-04-20 13:44:30 -0400:           Partition Scheme: GUID Partition Table
2014-04-20 13:44:30 -0400:           1 volume will be created
2014-04-20 13:44:30 -0400:                     Name                    : “Terra 8”
2014-04-20 13:44:30 -0400:                     Size                    : 2 TB
2014-04-20 13:44:30 -0400:                     File system          : Mac OS Extended (Journaled)
2014-04-20 13:44:30 -0400: Unmounting disk
2014-04-20 13:45:00 -0400: Creating the partition map
2014-04-20 13:45:01 -0400: Waiting for the disks to reappear
2014-04-20 13:45:01 -0400: Formatting disk2s2 as Mac OS Extended (Journaled) with name Terra 8
2014-04-20 13:45:26 -0400: Initialized /dev/rdisk2s2 as a 2 TB case-insensitive HFS Plus volume with a 155648k journal
2014-04-20 13:45:26 -0400: Mounting disk
2014-04-20 13:45:29 -0400: Erase complete.
2014-04-20 13:45:29 -0400:
- That was it, gone.....

Hi, i have a new number and I'm trying to activate iMessage but i can't. it is only saying waiting for activation, i have tried a lot of times with not success. i'm not sure if i need to replace the old one to this new one, or what do do. can you help

Hi, i have a new number and I'm trying to activate iMessage but i can't. it is only saying waiting for activation, i have tried a lot of times with not success. i'm not sure if i need to replace the old one to this new one, or what do do. can you help

Troubleshooting iMessage activation:
http://support.apple.com/kb/TS4268

HT201210 My iPhone has crashed and i went to iTunes to restore it and after waiting for it to be restored it said "The iPhone could not be restored. An unknown error occurred (2006). Can anybody please help suggest what i should do now?

My iPhone has crashed and i went to iTunes to restore it and after waiting for it to be restored it said "The iPhone could not be restored. An unknown error occurred (2006). Can anybody please help suggest what i should do now?

This error normally appears if you attempted to downgrade or modify your iOS. See here http://support.apple.com/kb/TS3694#error1015

Safari waits for external drives to spin before showing content (chrome does not)

Similar Messages

Maybe you are looking for