Safari Widget will not leave the screen

I have been using several widgets that I created with Safari 3. Everything was going fine until today. One of my widget appears on my screen at all time. My other widgets works perfectly but this one always stays on the screen even if I pushed the F12 key and that all my other ones have disapeared.
Any idea how to fix this? I though of just deleting the widget and recreate it after from the web page in Safari but I don't know where the widgets created with Safari 3 are stored. Please help! I have this big square on my screen ad I can't give rid of it.

Could be a hardware problem and would need checking out, however it could also be a software problem in that it could be an app that's causing the problem that uses the ringer volume, such as Pandora, so first backup your iPad in iTunes then delete apps particularly that uses the volume control on your iPsd and see if the ringer symbol disappears for good then reinstall any apps that you deleted.

Similar Messages

  • The ringer symbol will not leave the screen ?

    Hello, I'm having trouble getting rid of the ringer symbol that is sitting in the middle of the screen. I'm also having problems with the volume not being able to turn down.  I think this is all related.  Any ideas?

    Could be a hardware problem and would need checking out, however it could also be a software problem in that it could be an app that's causing the problem that uses the ringer volume, such as Pandora, so first backup your iPad in iTunes then delete apps particularly that uses the volume control on your iPsd and see if the ringer symbol disappears for good then reinstall any apps that you deleted.

  • HT201263 None of these answers help my problem.  My ipad will not leave the Apple logo.  I hold both buttons and the screen goes black, then the apple logo immediately pops back up.  I can't do anything because the apple logo just keeps popping back on.

    I haven't been able to find any answers that solve my problem.  My Ipad will not leave the Apple logo.  I hold both buttons and the screen goes black and then the Apple logo immediately pops back up.  I can't get the red slider screen at all.  No matter how many times I hold down both buttons the screen goes black and then the Apple logo pops right back on.

    Before you do anything else, try charging via a wall outlet for a while, since its off. Then try turning it back on.
    When you put the device into recovery mode it allows you to restore the device when no other options work. You do risk losing everything currently strored on the ipad itself. Hopefully you've performed regular backups either via itunes, icloud or both. Evern if you have synced content to either of those, you may not lose everything. All previous purchases have been saved in the itunes and app stores, so you can dowload them again.
    while the ipad is off, press and hold the home button and plug the usb cord into the ipad. You should see a message pop up on the itunes window on your compoter screen that state it has discoverd an ipad in recovery mode.
    You should now be able to restore

  • TS3274 My ipad display will not function, the screen will not display anything when turned on, you can see that the screen lights up but it is completely black

    The screen on my iPad will not display, the screen lightens up when powered on but the screen stays black, any fix for this that I can do at home?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • I have itunes version 8.2 and would like to avoid downloading a newer version. The iTunes Store will not leave the page for iTunes 10. How do I fix this?

    The iTunes store will not leave the page for downloading iTunes 10. I just deleted iTunes 10 because of errors to purposely go back to version 8.2. Now I would like to keep 8.2 and not upgrade. How do I get this page to go away, or just keep 8.2? I would like to only have a version before 9.0. Please help!

    The iTunes store will not leave the page for downloading iTunes 10. I just deleted iTunes 10 because of errors to purposely go back to version 8.2. Now I would like to keep 8.2 and not upgrade. How do I get this page to go away, or just keep 8.2? I would like to only have a version before 9.0. Please help!

  • Since I have upgraded to ios7 my internet banking page will not fit the screen. Before updating I enlarged the page by using the *2 button in the bottom right hand of the screen, there no longer is that option?

    Since I have upgraded to ios7 my internet banking page will not fit the screen. Before updating I enlarged the page by using the *2 button in the bottom right hand of the screen, there no longer is that option?

    Install or Reinstall OS X from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
          the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
               because it is three times faster than wireless.

  • HT5622 I set up a passcode that will not unlock the screen. How do I reset the passCode?

    I set up a passcode that will not unlock the screen. How do I reset the passCode?

    If the passcode will not unlock the screen you are entering the wrong passcode. To change or remove the passcode you can use the settings app.
    Settings > General > Passcode Lock
    The caveat here is that to make changes to the passcode lock you need to enter the correct passcode lock.
    If you do not know your passcode you'll have to restore your iPad by connecting it to iTunes on your computer.

  • My computer will not  start the screen is white.

    My computer will not  start the screen is white and the little circle just keeps going and going. What do I do?  I have a 2010 Macbook pro 15 inch running Mountain Lion. I have already tried holding optin+command+p+r. Help Please.

    Start with this support article:
    http://support.apple.com/kb/ts2570
    Ciao.

  • My new air 2 iPad will not rotate the screen from vertical to horizontal

    MMy new iPad Air 2 will not rotate the screen from vertical to horizontal. Is there a screen lock

    There is a screen lock. If the Rotation Lock is on you will see a circular arrow surrounding a small lock at the top of your screen near the battery level indicator. To turn on or off the Rotation Lock swipe up from the very bottom of the screen to being up the Control Center. Look for that same icon and tap it.

  • My ipod touch 4th generation will not leave the apple logo sign

    my ipod touch 4th generation will not leave the apple logo sign what do i do to turn it on and work ? please help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My Zen Micro will not leave the Start Scr

    I have had my Micro since last Christmas. I have had no problems up untill yesterday, I went to turn it on, but when i pulled the little on button, it went straight to the open screen, made a really wierd noise then stopped, the light went off, and now it wont do anything, i plugged it into the wall jack and left it untill today when i woke up. I took it off of the charger and it was the same.. on that screen. I plugged it up to my computer but it wont recognize it!!! no matter what buttons i push it just stays the same!!
    Someone Help!!!
    <3 Steffles

    Here's what you can try:
    Zen Micro / Zen MicroPhoto
    . Make sure that battery is charged.
    2. Detach your player from the computer, and ensure that it is turned off.
    3. Remove the battery.
    4. Move and hold the Power button to the Power On position and re-insert the battery to the Zen Micro. Hold the Power button until the Recovery Mode appears.
    5. The following options will be displayed:
    * Clean Up (Performs a disk scan on the players hard disk, it will not affect music files)
    * Format All (Formats the players hard disk - Note: all contents will be lost)
    * Reload Firmware (Reloads the Operating System on the Jukebox)
    * Reboot (Reboots the device).

  • My ipod touch will not work the screen is black with a small white circle/wheel in the middle of it no matter which button i press and hold nothing happens

    My ipod touch stopped working. The screen is black with a small white circle/wheel with ridges/teeth in the middle of the screen. No matter what button is pressed and/or held nothing happenes. Can anyone assist me?

    Try the remaining items of:
    iOS: Not responding or does not turn on
    If not successful and you can't turn the iPod fully off, let the battery fully drain. After charging for at least and hour try again.
    - If still problem time for an appointment at the Genius Bar of an Apple store.

  • My iPhone 4 will not leave the apple logo page?

    I updated my iPhone and it began installing and downloading the new update then all of a sudden it turned black, I thought it was part of the proccess so I just ignored it and then it flashed to the apple logo page, i waited a little and then it turned black again, then back to the apple logo. It keeps repeating this. I tried to plug it into the computer and nothing happened, I would push the home and lock button but my lock button is stuck. Please help!! I need this to work. I thought about letting it die, but god knows how long that would take. PLEASE HELP

    Hey laysams64,
    I would follow these troubleshooting steps:
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    from: iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Welcome to Apple Support Communities!
    All the best,
    Delgadoh

  • My Iphone 4s touchscreen is not working i keep restarting it and it will not work, the screen will not respond to my touch what do i do?

    i need help immediatly

    need more information, when you say not working, is it frozen, is it powered off and not comming on, "NOT WORKING" is not going to help us help you.

  • My ipod will not charge, the screen is black and when i try to recharge it still will not come on. How can i tell if it is the battery or just the usb cord?

    How can you tell if you need a new battery or a new usb cord?

    See this Apple support document.
    http://support.apple.com/kb/TS3281
    B-rock

Maybe you are looking for

  • Windows XP no longer accessible on my Macbook Pro???

    I bought a used MacBook Pro with BootCamp and Windows XP installed, thus I have no disc for Windows. I got one for Snow Leopard. After downloading Lion (here we go again), when I try to restart in Windows, a black screen appears with a message that t

  • Write HTML code in webdynpro

    Hi All,   Can anyone tell me how two to write HTML code in   webdynpro application to make myself clearer. this is what i want. IWDTextView txt = (IWDTextView) view.createElement(IWDTextView.class, "txt" ); txt.setText("<hr>" + "Today Order"); But th

  • Shooting Style

    Dear Forum, Do those TV reality shows have a predefined shot list when recording, are the shots or compositions pre-planned or its just a case where they have several cameras and then take the best shot in post later? Just want to know since i've bee

  • Materialized view logs pretty huge!

    Hi, I have a table MLOG$_XXXXX, which i guess is a materialized view log table. It is huge in size (80GB) and is growing at a very alarming rate. Could someone please help me to reduce the size of this table? How do I find out which materialized view

  • Rotation about ANY axis

    Hi all !!! I am a novice to 3d programming but i have done some JAVA programming earlier. The problem i am finding is that I do not know how to rotate any geometric object (say, a cylinder or a cone) about any arbitrary axis, say ax+by+c=0. Can anybo