Safari will not prevent search engine from providing suggestions, even though that block is checked in Privacy preferences.

I also seem to have having this problem, despite having checked the "prevent" option in Preferences. Typing words into the Safari search bar (NOT the Google search bar on one of Google's search pages) leads to suggestions being made:
as well as connections being made to lhr14s21-in-f7.1e100.net:
which http://66.161.36.140 suggests resolves to a Google IP address block.
I'm using Safari Version 6.0.4 (8536.29.13) on Mac OS 10.8.3.

Similar Messages

What IP address Bing is using to provide Safari's "search engine from providing suggestions." ?

When you use Safari, you will find that Search engine can provide you with suggestions like this . For example, I am using Bing.
How can I know what IP address Bing is using to provide those suggestions?

>open a new tab
>type about:config in the address bar
make sure
1: browser.fixup.alternate.enabled should be false
2: keyword.enabled should be true
3: keyword.URL should be http://www.google.com/search?ie=UTF-8&oe=UTF-8&q=

My DVD drive on my IMAC will not allow me to load a disc, even though there is no DVD in the disc slot.

My IMAC will not allow me to load a DVD, even though the disc drive is empty. Any ideas as to what I should do to resolve the problem
Thanks
Roger

Sounds like you have a newer iMac than this forum covers. The newer ones have a bar or "fence" that, on detecting the drive has failed. moves the bar to block the slot so no media can be inserted (to avoid damage or loss of a disk).
You will need a new optical drive--contact an Apple retail Store or an Authorized Apple Service Provider:
Find an Authorized Service Provider

Installed Lightroom 5.7 Update and Camera RAW 8.7 But still will not recognise my Canon 7D MkK ll even though this is now on the list

Installed Lightroom 5.7 Update and Camera RAW 8.7 But still will not recognise my Canon 7D MkK ll even though this is now on the list- what can I do?
Operating System OSx Yosemite IMac.

What exactly does "not recognise" mean, Kathy?
You're on Mac (thanks for providing that detail): are you getting a "could not be read" message? If you are, it's a write permissions issue with the destination. Change the permission, and all should be well.

Will not remember my password or e mail even though I click remember when it comes up

When I log on to web sites Firefox will not remember my e mail and password even though I click on the remember box when it appears
== This happened ==
Every time Firefox opened
== A few weeks ago

Do you see the saved names and passwords in the Password Manager?
Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
Or doesn't anything happen if you click the Remember button?
See also http://kb.mozillazine.org/Password_Manager (Troubleshooting)

My safari will not open after downloading librooksbas.dylib plug in. message that is displayed when i try and open is "safari quit unexpectedly while using the librooksbas.dylib plug in" i can either re-open or ok the error to which neither work :(

i have tried the terminal code thing where you enter certain words then press enter and it worked but as soon as i restarted it and opened safri the error message apperarewd again my software is OS X 10.9.1

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d; /:$/{s/ *:$//;x;s/\n//p;}; /^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/$.*: $$.*$/ $\2$/;H;}; /Apple|SCSM/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* || continue; ls | while read f; do [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed 's:/Users/[^/]*/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

TS1717 i recently downloaded two tracks from itunes: they will not play in my windows media center even though i have added them to that location. any idea what other trouble shooting i can attempt on this issue??

i recently downloaded two tracks from itunes and they will not play in my windows media center. i have never had this problem but the two tracks play on my PC just not in the windows media center and usually all my itunes music plays in there no problem??? any idea what to do? thanks

I'm searching for an answer to almost the same exact problem, using almost the same exact hardware and software. Has an answer been found?
The files that I'm trying to burn come from eMusic, and they are formatted mp3. Recently, (after the iTunes update to 9.2.3?,) they would not drag and drop from iTunes into Toast. From several different discussions I've tried working around this by dragging to the desktop first then dragging and dropping to Toast, going to Toast from a programmer's homemade help window, " iToons," and today, after talking with Apple support, going directly to Toast from my eMusic folder. Alas, all recordings do not perform like they use to. Sometimes they play and sometimes not. There is one I managed, that is listenable, but sometimes I have to put it in my car stereo over and over again as it gets ejected with an error code, sometimes, finally it takes it... Some of the recordings on other disks I've burned are not clean - they have white-noise sounds creeping in... I use to have none of these problems. One time as I was listening to a CD that managed to play, and it just stopped playing... Is there an answer out there to get back to how it use to be? Thanks for you help.

Itunes will not let me look at my acount, even though it shows i am signed in it keeps asking me to sign in.

i am trying to manage my account, go to itunes sotr- my acount. even though it shows me signed in, it asks me to sign in again and agina and will not go to my account.

Back up all data.
Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
~/Library/Cookies
In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. A folder should open. If it does, move the contents to the Desktop, leaving the folder open. Relaunch the application and test. If the problem isn't solved, quit the application again and put back the items you moved, overwriting any that may have been created in their place. Post your results.
Otherwise, delete the items you moved to the Desktop and close the folder.

Airplay mirror imaging icon will not show up on my macbook pro even though i downloaded mountain lion. How do i get airplay icon to appear on my macbook pro?

i have a macbook pro (almost positive that its a 2010 version) and i got mountain lion. The BIGGEST AND MAIN REASON i bought mountain lion was so that i can do airplay, allowing me to mirror image what is on my mac to my Apple TV. my whole computer is updated as far as the displays and newer features but the small airplay icon will not show up on the top of my screen. therefore, not allowing me to mirror image what is on my mac to my tv... it is connected to the same wifi as my apple tv. idk what to do. could it be because my macbook pro is a 2010? desprately looking for help...please help me with this issue
thank you

Welcome to Apple Support Communities
Read > http://support.apple.com/kb/HT5404 AirPlay Mirroring requires an Early 2011 or newer MacBook Pro, so your MacBook Pro isn't supported.
To mirror your MacBook Pro's display onto the Apple TV, you can use an application like Beamer or AirParrot even if AirPlay Mirroring isn't compatible

How do I prevent search engines from indexing my site?

I have a site that I would rather not password protect but would like to keep reasonably private. In the past, I would simply add the tag in the header (<META NAME="ROBOTS" CONTENT="NOINDEX, NOFOLLOW">) and was done with it. I can't figure out how to edit headers in MobileMe. Anyone has an idea?

I kind of thought that this was a finished site, but none of the links work.
Add Text. Lots of text. Text that includes words that people will use in a search. YOu dont need to make it a book that no one will read, but include plenty of text.
Make sure you use your <h1> tag...and 2 and 3 and..
Put a meta description using common words and phrases that people might use for a search. You will hear people say meta tags are a waste of time, but the 5 minutes you spend to put them up hardly seems to be a waste.
GAry

Safari will not got to link from flash projector

I have a flash swf file with a simple web link. when i load the swf file and click the link it opens safari then loads up my homepage. It does not go to the link i clicked. if i choose internet explorer as my browser the swf file works fine.
I am running 2 G4's 10.2.8 & 10.3.9
safari 1.0.3 & 1.3.1
PLEASE HELP

Hi Azam
can give the address of the website? so others can check it for you.
safari seems fussy about code being "just so" compared to other browsers.

Safari will not load the content from the webkinz website. What do I do?

MacBook Mac OS X (10.4.9)
MacBook Mac OS X (10.4.9)

The Site uses Flash so you need to install Flash Player to view it.

My google mail through FireFox will not open up a link provided by a forum that I contribute to,AOl through FireFox will.The googlemail produces an Internal Serer Error notice.

I am a registered member of a Specialist Car Forum. I subscribed to have E'mail alerts to my google mail account when responses were made to the posts that I provide comment to. During the past week I have been getting the following notice in black font on a plain white background :- Internal Server Error
I suspected a problem with google mail so I forwarded the troublesome E'mail with link attached to my AOL account. I then opened the E'mail,clicked on the link and it activated immediately.
Whilst both are powered through FireFox I was wondering whether there is a FireFox/google mail issue as FireFox/AOL does not have an issue. My ISP is O2.

I have exactly the same issue. After FF upgraded on its own to version 5, it won't open from start menu, taskbar, desktop icon, or even by pressing firefox.exe in program files directory. It does so by pressing a link at msn messenger, inside Outlook etc.
Disabling all addons, didn't help. Moreover, I can't start FF in safe mode or start profile manager (Start > Run> firefox.exe -ProfileManager).
OS: Windows 7 64bit
Windows Event Viewer entry details:
Faulting application name: firefox.exe, version: 5.0.0.4183, time stamp: 0x4df95302
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x8c724fa6
Faulting process id: 0xc0c
Faulting application start time: 0x01cc37fe2fae7e8b
Faulting application path: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Faulting module path: unknown
Report Id: 6e7f03eb-a3f1-11e0-8f4d-a4badb0238f6

HT1351 Music imported from CDs will not synch to my iphone or ipad - even though it's ticked and set up correctly. Looking at other posts this seems ot have been an issue for ages. The latest itunes software update hasn't fixed it

This has now been ongoing for over a month - the lastest software release hasn't fixed it.
I can import music from CDs - the tracks are ticked for synching and all the associated rigmarole is correct.
Problem is when I synch, apps go across but imported music doesn't. It just gets to step 5 - waiting for changes to be applied - and then does nothing until it eventually finishes synching but no music has come across.
Same issue on my iphone.
I have looked at some solutions on forums but they seem complicated and I don't understand why apple haven't yet fixed this (or why you can't contact them). Seems a basic fundamental service that they are not supplying.
Having spoken to people in the family, its seems I'm not laone with this problem (unless you have a mac......)

I had this same problem with my new MBP 15", but only with the USB port on the left side. The USB port on the right side worked fine. Perhaps the ports on the left don't have enough signal energy for the iPhone.
Anyway, try using a different USB port, and if that doesn't work, perhaps you could try a powered USB hub.

Time Machine will not backup to my external Hard Drive even though it works on another Mac

I have a WD My Book Studio Edition II that backs up perfectly fine on my iMac 2008 ,but when it comes to my Mac Pro 2001 it just comes up with a "Calculating size..." Message that goes on forever.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Safari will not prevent search engine from providing suggestions, even though that block is checked in Privacy preferences.

Similar Messages

Maybe you are looking for