Safari will open, but...
Safari will open, but only google works. Any other website and it says “unknown error” (kCFErrorDomainWinSock:10022) I don't know what to do. I reported it to Apple and I got rid of the bookmarks tab. I just got Safari yesterday and I haven't deleted anything out of it. I have a gateway laptop with Vista. Can anyone help?
Is there any other place this folder could be?
•Click on the HD is it there ? Now I think about it that is where Previous System folder should be, been a little while since i did one.
Also I read your next post and the links and it said safari might now work after an archive and install and you must re install the old version? How do I do that?
I do not think they say the old version rather update to the lastest ( most recent version for your os). that is correct version os on your spex ->Mac OS X (10.3.5) look under Blue apple about this mac to make sure
What version is the Blank page Safari, when launched under-> Safari
About safari:
Go to the Blue apple -> Software update and run that to see what is available for your os now. Are there any safari updates.
Run permissions repair before & after uppdates with the Disk Utility do you know how to do that ? Look at Gulliver knowledge base article, I linked to you.
You are using Firefox now & have your bookmarks good they are not lost!!
•Again look for "previous system folder" in HD
•What version is your blank Safari?
•What is avaliable to download from the software updater
•Read Gullivers Kbase article, before you update.
Hope this helps
Similar Messages
-
Safari will open but then nothing!
Hi,
I went to the apple store because of a problem with the fans coming on really loud and they re installed my operating system using a few cds in the store.
I came home and everything seemed fine untill I tried to open safari. It opens but none of my bookmark menus are there and when I try to type an address into the window, it lets me type but then does nothing!
Then when I try to go to the Toolbar at the top of my computer it will not let me click anything! It is very strange. I downloaded firefox and am currently using that, however I really want to figure this out!
Any help would be appreciated!
Thanks!
Powerbook G4 Mac OS X (10.3.5)
Powerbook G4 Mac OS X (10.3.5)Is there any other place this folder could be?
•Click on the HD is it there ? Now I think about it that is where Previous System folder should be, been a little while since i did one.
Also I read your next post and the links and it said safari might now work after an archive and install and you must re install the old version? How do I do that?
I do not think they say the old version rather update to the lastest ( most recent version for your os). that is correct version os on your spex ->Mac OS X (10.3.5) look under Blue apple about this mac to make sure
What version is the Blank page Safari, when launched under-> Safari
About safari:
Go to the Blue apple -> Software update and run that to see what is available for your os now. Are there any safari updates.
Run permissions repair before & after uppdates with the Disk Utility do you know how to do that ? Look at Gulliver knowledge base article, I linked to you.
You are using Firefox now & have your bookmarks good they are not lost!!
•Again look for "previous system folder" in HD
•What version is your blank Safari?
•What is avaliable to download from the software updater
•Read Gullivers Kbase article, before you update.
Hope this helps -
When i updated my computer, my safari on applications wont open and says "safari quit unexpectedly" and wont open but when i open it on the application key on the mac, safari will open. how do i get safari back on my dock where it will open. when i click reopen it wont. but i know safari works because thats what im using right now. it just wont open when i click the one i had loaded on my dock and in applications. please help!
StephanieDrag the Safari icon straight up and off the Dock so it goes, "poof" ...
Now click and hold the Safari app in the Applications folder and drag that to the Dock.
See if you can open a webpage in Safari. -
I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open. Any ideas on how to resolve this?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
my itunes will not open at all. it occasionally will open but when i plug my iphone into it the program freezes and crashes. please help as soon as possible
i think i might have a solution... i have windows vista and after i installed to latest itunes update everytime i tried to open it it would freeze. I tried everything, including uninstalling itunes and all of its components and reinstalled it numerous times. So i went to the itunes folder in my folders, not on itunes, and i deleted my itunes library and playlists. After that it worked just fine, all of my music was deleted but luckily i had my files saved elsewhere.
I hope this helped! I know its frustrating and APPLE/ITUNES NEED TO FIX THE PROBLEM!!!! -
When I right click to open in new tab, the new tab will open but the page is blank. I have tried it in Firefox Safe Mode & with Add Ons Disabled, still doesn't work.
Hi UKBlue,
Is your new tab page set to about:blank? You can change this from the about:config page or you can restore defaults by resetting Firefox.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you. -
Itunes will open but Itunes store won't. Tells me there is no internet connection and yet I am able to write this question on your site! Can anyone help, as I can't update Ipod without it?
Apple ID security issues -
Call Apple Care and ask for the Account Security Team. They can assist you with your issue. -
I have a macbook pro 2.4 ghz intel core 2 duo 2010 13" aluminum with 8gb of memory and a 250gb hard drive running version 10.6.8 with safari 5.1.4. Safari will open up intermittently on its own. System preferences and the dock isn't set up to start safari. Can't figure out why this is happening. Had reloaded system from scratch and noticed this happening lately.
Remove iAntiVirus, then reboot, see if it's better.
-
IPad will open but not display information entered on a form sent as a PDF.
iPad will open but not display information entered on a PDF file. Same file will open and display all information on my iMac. Anyone had this problem?
I think that you are trying to view a form fields PDF file and you cannot see the content that was filled in on those fields. Form fields will not show in the mail app or in iBooks. Download Adobe Reader for the iPad. It is free and it offers a lot of features for a free app. Save that PDF to Adobe Reader and see if the text in the fields appear.
-
Ever since I downloaded the new Firefox, when I right-click on a link to open it in a different tab, the tab will open but will not load anything, no matter what link I try. The tab will show the website destination in the navigation bar, but will not automatically load it; I have to press the load button in the navigation bar instead of it instantly loading.
== This happened ==
Every time Firefox opened
== The newest version, 3.6.6, of Firefox was downloadedIt's not specific sites. I can middle-click on the same link 50 times and it will open it in a new tab 45 times and 5 of those times, it will randomly open it in an entirely new window. I don't know what's causing this.
It happens so randomly that I don't know how to pin-point what it could be. -
I have CC and bridge, bridge will open but I cannot open a photo file. I get a message: Windows cannot fint C:............... CS4 ck to see if you have spelled properly. Any Ideals? I had CS4 but have since removed it.
A couple of possibilities:
How did you remove CS4 ? If you removed it improperly instead of Uninstalling it (say, you "deleted" it or just dragged it to the Recycling Bin), you almost certainly left stuff behind that needed uninstalling.
What's even worse, if you removed CS4 after you installed CC you may have messed with the CC installation.
I'm not going to attempt to tell you how to fix it, since this will probably involve uninstalling CC and after that looking for, downloading the Adobe CS_Cleaner tool and the CC_Cleaner tool, then re-installing CC, since I'm not a Windows user and don't want to mislead you.
In any case, when Windows users chime in to assist you, they'll need all the details which you have not provided so far. -
Dashboard has stopped working. The App will open, but none of the widgets will function. I've deleted widgets & added new ones, but they also will not work.
I get the "License has stopped working" mesages too.
We have a MacbookPro at home. There are two user-acounts on this mac, one for my wife and one for myself. This way we keep our personal stuff (e-mail, files, settings, dropbox, desktop clutter etc) separated. "Fast user switching" is enabled to easily switch to your personal account.
Now when I open Photoshop I might get the dreaded "License has stopped working" message. This will happen if Photoshop is left open in her account. So I'll have to log into her account, close Photoshop, go back into my own acount and open Photoshop again.
I should not get this message since Photoshop is not part of a particular user account, it is installed in the "Applications" folder which is accesible to all users.
What makes it even more annoying is that I get the "License has stopped working" message on trying to open Photoshop even when Photoshop is closed in in the other acount, but Illustrator is opened.
This makes no sense since we bought Photoshop and Illustrator CS3 as separate programs, not as a part of the Creative Suite.
I did not report this to Adobe yet but it wil do that now. -
Since upgrading to Mavericks my iMac no longer recognizes my digital camera. iPhoto will open, but my camera never appears in the source list or goes into import mode. Help!
I found that if you open iMage Capture App that seems to trigger iPhoto to open and thew camera is connected. At least that happens with my camera. Good luck.
-
After recent upgrade Mozilla will open but does not connect - I have Norton Antivirus.
After recent upgrade Mozilla will open but does not connect. I have uninstall/reinstalled several times. I have NortonAntivirus.
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware -
After installing Mavericks, I found that my Apple Apps (iBooks, App Store, Maps, iCalendar, iBooks, etc) will open but freeze or are none responsive. I have reinstalled Mavericks, did a recovery and reinstall, almost everything that I could find in other discussions. They only thing that helped was the recovery, until I tried to reinstall Mavericks. Someone please help.....
OS X Recovery does restore OS X meaning Mavericks.
Make sure there's enough storage space ...
Click your Apple menu top left in your screen. From the drop down menu click About This Mac > More Info > Storage
You'll see Available and Capacity. Make sure there's at least 15% available disk space.
The startup disk may need repairing ...
Launch Disk Utility located in HD > Applications > Utillities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If DU reports errors, restart your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities in OS X Recovery to repair the startup disk.
Make sure to back up all important files first before using OS X Recovery.
OS X Recovery does require a broadband high speed internet connection.
Maybe you are looking for
-
Worried if I sync, I'll loose all the songs on existing ipod that don't appear in new library. I backed up my former FULL itunes library (purchased songs and my own CD's I burned into library) from old computer to an external hardrive so I have the
-
Enabling SSO with Weblogic Server
Hi, Can someone please forward some documention on enabling SSO with Weblogic server for different applications using the admin console. Is enabling SSO only possible programmatically?? Is there an external server amongst the Weblogic Platform that m
-
Changes to password are not reflected immediately in the application
Hi All, If I change the password either from the console or through the application itself, the change are not reflected immediately. They are reflected when I shutdown both the admin server and managed server and bring them up. I think the previous
-
Is it possible to play mp3 without using JMF or JLayer??
hi, i wan to play mp3 without using JMF or JLayer as just like .wav file. If it is possible then anyone plz tell me how it can b done..please.. thnx. Edited by: samratsinghal on Sep 11, 2009 10:21 AM
-
Restrict Purchase Order Minimum Value
Hi, We want that the SAP System should not allow the user to create a Purchase Order of Value less than Rs. 5000. Is there any SAP Standard Functionality available for the same or we need to use the User Exit? Regards, PK