Safari window filled squares with a piece of images from other windows

All the latest updates.

Please read this whole message before doing anything. This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it. Step 1 The purpose of this step is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.” While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin. Test while logged in as Guest. Same problem(s)? After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it. *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing. Step 2 The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. *Note: If FileVault is enabled, or if a firmware password is set, you can’t boot in safe mode. Test while in safe mode. Same problem(s)? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Similar Messages

TS2755 I have an iPhone 5 and am experiencing problems with receiving photos in iMessage from other iPhone users. I have been to the Apple store and the genius could not find anything wrong with my set up. suggestions anyone?

My iphone 5 is receiving photos from other iphones as text, not imessage...the genius at the apple store did not find any problems. suggestions anyone?

- On her iPod go to Settings>iCloud and turn off contacts and other things if you want.
- On the iPod go to Settings>Messages>Send and Receive and add here own email address and delete the Apple ID email address. Also uncheck yur phone number if it appears. The only way to delete the phone number is to use an Apple ID not associated with the phone. You do that in Settings>Messages>Apple ID
You can go to Settings>FaceTime>Yu can be reached at and add here email and delete the Apple ID.

Problem with BAPI BAPI_MATERIAL_SAVEDATA when calling from other system

Hi All,
I able create new material using the BAPI BAPI_MATERIAL_SAVEDATA in development system.
but when i am calling this BAPI from other systems by passing the same values that i used in the development system . system is giving me an error ( in the return statement) saying that material number doesn't exists .
Can any one have some pointers towards this ?
Thanks & Regards,
Praveen

Hi,
this FM BAPI_MATERIAL_SAVEDATA
is used to extend a material to another plant
for that you need to read the original data via BAPI_MATERIAL_GET_DETAIL and then select additional data from MKVE and save it via BAPI_MATERIAL_SAVEDATA with table parameter SALESDATA
also check with
BAPI_STANDARDMATERIAL_CREATE Create/Extend Material
BAPI_MATERIAL_SAVEDATA - QM - Inspection Setup
Problem in BAPI_MATERIAL_SAVEDATA
Thanks&Regards,
Naresh

Difficulty with recieving files through bluetooth from others

you need to help me... PLEASE
I'm having difficulties with receiving files from others via bluetooth. I've tried pairing, but its not working.
When i go to media for the "receive using bluetooth" option all it does is display "file transfer-waiting for connection" message.
i can send things to people, but not the other way around,
PLEASE ASSIST!!!!

Hi and Welcome to the Forums!
See this KB:
KB05409 Transfer a file using Bluetooth technology between two BlackBerry smartphones
Substitute, in the KB, the appropriate instructions for your other device in place of the KB section for the sending device. Do not skip the "Receive Using BT" step on the receiving BB...nothing will transfer if you do. Also do not skip initiating the send on the sending device -- you said nothing about that, so I must assume you did not do that step.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Glitches in address fill-ins with nicknames; default font problem; plus other glitches in Thunderbird 31.3.0 and 31.4.0; can I roll back to an earlier version?

I am unhappy with the recent upgrade to Thunderbird 31.3.0 and now 31.4.0. My bottom line question is whether I can roll back to the previous version, which was working well for me.
The problems I have encountered include:
1. I used to be able to enter a single letter in many cases in the address field, and the autocomplete would fill in the entry that I always use with that single letter. That function has been lost, as has auto fill-in based on the nicknames I have entered in my Address Book. I see there is another thread on this problem (https://support.mozilla.org/en-US/questions/1036962), but no satisfactory answer so far. Entering a single letter now pulls up completely unrelated address entries that may not even have that letter as part of the name, address or nickname for that unrelated address. I have created new nicknames to try to adapt to this problem, but even these new nicknames no longer work with the 31.4.0 upgrade yesterday, forcing me to create yet more complex and hard-to-remember nicknames to pull up my frequent addressees. This is all very frustrating to me, as I depend on speed and ease when creating messages.
2. Also, I used to be able to enter a single letter in the address field and then use the mouse to click on the "To:" symbol to the left of the next address line to change the next entry to "Cc:"; doing so would then cause the complete address to fill in in the "To:" address field, and make the next field ready for an entry. That no longer works. If I use that technique, the shortcut that I entered in the first field gets included along with the address (if I'm lucky enough to have the address itself selected now, given the problems I've mentioned above). I now have to press "Enter" in order to get the address in the first field to "take" correctly, and then have to click on the "To:" symbol for the next line as a separate action. Just another inconvenience with the new version.
3. While still on the subject of addresses, personally I see no reason why the address and subject fields should now be colored blue by default rather than appearing as blank, white fields. I far prefer the old look. And I suspect that changing from the blue color to a nice, clean, white field takes time and computer resources that slow things down.
4. The default font (Times in my case) no longer "takes" when replying to or forwarding messages. I've checked Tools/Options/Composition, and Times is still shown as my default font. However, when I start to type (in a reply with the original message quoted or in a forwarded message), the result is "Variable Width". In order to get Times, I need to highlight the block of text after typing, including the lead-in to the quoted message or the header of the forwarded message, and select "Times" when "(mixed)" shows up. This is a big pain; I often forget to do so and end up having to edit the Unsent Message (which I check before sending) as New and correct the font.
5. A minor problem: I rely on the reminder to attach a message which shows up when an "attachment-related" word is entered in the body of the message. It has been a wonderful feature of Thunderbird that has prevented me on many occasions from sending off messages without the attachments. However, in the new versions, even if I have indeed added the attachment, a pop-up comes up on sending the message saying there has been no attachment and asking if I want to add one. It's easy enough to just click "No", but it's yet one more unnecessary and distracting step that this new version is requiring of the user.
I'm really sad to see these various changes/glitches. I love Thunderbird and it bothers me deeply to find myself mired in so many new problems that slow down my work. I would be grateful for any suggestions and advice, and, particularly, for any information as whether I can roll back to the version prior to 31.3.0 that was working well for me.

Thank you, Zenos. I tried rolling back to v31.2.0, since I had not encountered problems prior to December. However, that didn't help. So I followed your valuable suggestion to revert to v24.6; that seems to have done the trick.
I would like to mark this problem as "Solved" -- the rollback seems to have worked. However, since my original post was a complex mix of things, before I do that, should I post the individual problem sets that I had noted (address fields/nicknames problems -- numbers 1-3; default font problem -- number 4; attachment reminder problem -- number 5) as separate issues which have not been solved?
Do you know if these various issues are being worked on? I'm glad to have the temporary fix of rolling back to an earlier version, but I'd like to get back on the current update schedule at some point if and when these problems have been corrected.
Thank you again!

Developer Module only shows blue square with a white cross, images are displayed in the library ok but not im developer Module

Ive just updated to LR 6 from LR 5.
The app seemed to launch ok but as I was looking around none of my photos will open in the developer module, they just have a blue box with white cross??

It seems to be something to do with Lightroom 6 accessing the GPU. I had this problem and under the "Performance" tab in "Preferences" (Edit menu), there's a box that says "Use graphics processor". I unticked this box and now the images are displayed in the developer module. I'll need to investigate further to find out why Lightroom is not working with my GPU but at least I can use it now.

Safari doesn't display jpg when accessing the image from the browser

This is weird and very annoying. As soon as I click on an image to display it, Safari starts loading it and as soon as it's completely downloaded, it disappears.
For instance, when I click this link (http://www.digitaltrends.com/wp-content/uploads/2010/08/lg3d_oled500x375.jpg) I see the image appearing gradually and then when it's fully uploaded everything disappears and I'm staring at a white page. I can view it fine when it's embedded in the page, but not when I'm trying to open it.
I already reseted Safari (cleared cache, etc.) deleted the plist file and the webicon file in Library/Safari. Nothing works and I have no idea what to do... Help!!!

Ok.. so it's just limited to your account and not a system wide issue. That's a good thing.
Since you are running 10.5.8, make sure Safari is not running in Rosetta.
Right or control click the Safari icon in your Applications folder then click Get Info. In the Get Info window click the black disclosure triangle so it faces down. Where you see Open using Rosetta... make sure that is NOT selected.
Quit Safari. Go to ~/Library/Safari and move the Downloads.plist file to the Trash. Relaunch Safari and try again.

Problem with showing a BLOB Image from DB

Hi!
I am just trying to show an BLOB Image on my JSP site with the following Code in my getImage.jsp :
getImage.jsp:
response.setContentType("image/jpeg");
Blob blob = rs.getBlob("image");
if (blob != null)
int iLen = (int)blob.length();
ByteArrayOutputStream output = new ByteArrayOutputStream(iLen);
output.write(blob.getBytes(1, iLen), 0, iLen);
out.write(output.toString());
and my problem is following:
I just wrote the BLOB with the Stream on my browser window, and I compared the bytes with the original of a jpg.
the problem is, that it is the same, but when I use out.write( )... all "?" in the byte stream are shown in different signs, and so I am not able to show the Image!
Can anyone help me?
Yours, Klaus from Austria

Yes, as Tugdual said, a common way is to use Servlet to display binary output.
out.write(output.toString());Klaus, if you use ByteArrayOutputStream.toString(), then the platform's default character encoding is playing a role. If you use the jsp implicit variable "out", which is a java.io.writer, you are treating character stream instead of byte stream. These two kind of streams are totally different. So your browser are not receiving the same the bytes as in your original jpg. No wonder your are not able to see the image. That is one reason why JSP is not suitable for binary output.
Well, you can also use JSP tags to accomplish your task, like the Oracle® Application Server 10g Multimedia Tag Library for JSP User's Guide and Reference

Need help with the hover over images from small to bigger

I read the tutorial about the hover over the small image shows a bigger image. I thought I would try it own my own but it did not work, do I need to make a link to the CSS file or do I need to do something different. Please help

Here is the tutorial link:
http://www.dreamweaverclub.com/dreamweaver-show-larger-image.php
This is a pure CSS Image Swap without the need for JavaScript behaviors.
It places the thumbnail image on a page with a "nolink" link or anchor so the CSS hover rule can invoke the appearance of the larger image inside an absolutely positioned division (APDiv) layer.
Paste the CSS code into the top of your page between the <head> and </head> tags.
<style type="text/css">
/**image to large**/
#picture {width:100px; height: 250px; background-color:#ffffff;}
#picture a.small, #picture a.small:visited { display:block; width:100px; height:100px; text-decoration:none; background:#ffffff; top:0; left:0; border:0;}
#picture a img {border:0;}
#picture a.small:hover {text-decoration:none; background-color:#000000; color:#000000;}
#picture a .large {display:block; position:absolute; width:0; height:0; border:0; top:0; left:0;}
#picture a.small:hover .large {display:block; position:absolute; top: 90px; left:150px; width:200px; height:200px; }
</style>
Paste the HTML code between the <body> and </body> tags:
<div id="picture">
<a class="small" href="#nogo" title="small image"><img src="small-image.jpg" width="125" height="83" title="small image" />
<img class="large" src="large-image.jpg" title="large image" /></a>
</div> 
Change small-image.jpg and large-image.jpg to your own.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Help with GUI (calling one class from other class)

Hi everybody,
I am new at GUI and I need your help..
I have a JPanel, named "holdAll", layout of which is set to BorderLayout. I have implemented all other JPanels in different class files. For example, I have TopPanel, LeftPanel, etc. as shown below
LeftPanel myLeft = new LeftPanel();
holdAll.add(myLeft, BorderLayout.WEST);
RightPanel myRight = new RightPanel();
holdAll.add(myRight, BorderLayout.EAST);
TopPanel myTop = new TopPanel();
holdAll.add(myTop, BorderLayout.NORTH);
MiddlePanel myMiddle = new MiddlePanel();
holdAll.add(myMiddle, BorderLayout.CENTER);
BottomPanel myBottom = new BottomPanel();
holdAll.add(myBottom, BorderLayout.SOUTH);
That works well but I have difficulties in ActionListeners.. For example, in my TopPanel class I have the code below:
public void actionPerformed(ActionEvent e) {
if (e.getSource() == btnInsert) {
int returnVal = fc.showOpenDialog(fc);
if (returnVal == JFileChooser.APPROVE_OPTION) {
File file = fc.getSelectedFile();
myImage newImage = new myImage(file);
System.out.println(newImage.myHashCode());
Here, if I have upload new image, then I have to update the listImage in the LeftPanel class.. But, I could not access the lstImage object in the LeftPanel class from the actionListener event in the TopPanel class.
What should I do? Is my design poor?

public class TopPanel extends JPanel implements ActionListener { //it doesn't allow "extends JPanel, Observable"
JFileChooser fc;
JButton btnInsert;
JButton btnDelete;
public TopPanel() {
setLayout(new FlowLayout());
setBorder(BorderFactory.createBevelBorder(1, Color.WHITE, Color.GRAY));
btnInsert = new JButton("Insert");
btnDelete = new JButton("Delete");
JLabel myLabel = new JLabel(" Search : ");
JTextField txtSearch = new JTextField();
txtSearch.setColumns(20);
JToolBar searchToolBar = new JToolBar();
fc = new JFileChooser();
btnInsert.addActionListener(this);
searchToolBar.add(btnInsert);
searchToolBar.add(btnDelete);
searchToolBar.add(myLabel);
searchToolBar.add(txtSearch);
add(searchToolBar);
public void actionPerformed(ActionEvent e) {
if (e.getSource() == btnInsert) {
int returnVal = fc.showOpenDialog(fc);
if (returnVal == JFileChooser.APPROVE_OPTION) {
File file = fc.getSelectedFile();
*//Here I want to send fc.GetName() to the JList in the LeftPanel*
my LeftPanel class is below:
public class LeftPanel extends JPanel{
public LeftPanel(){
this.setLayout(new BorderLayout());
setBorder(BorderFactory.createBevelBorder(1, Color.WHITE, Color.GRAY));
JPanel pnlButtons = new JPanel();
JButton btnName = new JButton("Name");
JButton btnSize = new JButton("Size");
JButton btnDate = new JButton("Date");
pnlButtons.add(btnName);
pnlButtons.add(btnSize);
pnlButtons.add(btnDate);
pnlButtons.setBorder(BorderFactory.createLineBorder(Color.BLACK));
JPanel pnlImage = new JPanel();
JList lstImage = new JList();
lstImage.setVisible(true);
pnlImage.add(new JScrollPane(lstImage));
add(pnlButtons, BorderLayout.NORTH);
add(pnlImage, BorderLayout.CENTER);
Is there any simple way?

HT201317 Can I upload photo to an album shared with me in photo stream from other one?

How can I do this?

Only the person creating the shared photo stream can add photos. If this is a shared photo stream and you didn't create it, you can't add photos to it.

Anyone having trouble with webpages displaying only squares with capital As in them?

On some websites, such as my banking site, all that Safari displays are squares with A's n them. All the text is replaced with these squares. see the screen shot below. I am assuming/hoping I am missing some plugin or extension. Any suggestions?

You're welcome.
ASC search ... there's room for improvement

I have a problem with loading the PNG image

I have a problem with loading the PNG image from site. For ex. go to icefilms com and is starts to load png like crazy CPU is huge and you can not shut down Firefox at least a minute. This is not just in this site but whit any one whit lots of pictures.
Image from firefox: Picture [http://img836.imageshack.us/img836/9910/7312011103147pm.jpg 1] [http://img28.imageshack.us/img28/8505/7312011103249pm.jpg 2] [http://img706.imageshack.us/img706/5615/7312011103348pm.jpg 3 ][http://img827.imageshack.us/img827/8483/7312011103533pm.jpg 4]
This is my Task Manager [http://img217.imageshack.us/img217/5715/7312011103621pm.jpg 1]
- I try safe mode, same thing
-All addons and plugins are ok
Any idea why is this so big problem.

i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check.
This problem just started for about 3 to 4 days now. earlier it was working normally.

Help with Crop of Imported Images - Please!

If I crop a jpeg that I have imported from my camera, then apply a crop, the cropped image will fill the screen. However, if I import a jpeg from iPhoto or any other source (desktop, folder, etc.) and apply a crop, the cropped image will be small and does not fill the screen.
There must be some setting that will make the resultant view of a crop from an imported jpeg fill the screen similar to the behavior of a typical camera imported image. This is driving me nuts and I've spent hours trying to figure it out.
I realize the actual crop in either case is smaller, but I just want to view it as large as possible. There must be some hidden zoom control for imported images?
Please help!

Unless something is broken - doubtful - your images from "other sources" are too small to fill the screen from a dimension standpoint when they are cropped. What you are seeing is the cropped image at 100% view - meaning that's it that's all the pixels you've got.
RB

Creating a property with list values derived from other hierarchy

Hello Friends,
Thanks in advance for any help in this regard.
1)     Can we have a property with list values populated automatically from other hierarchy.
2)     Can we select multiple items from the list box. Does property allows multiple values.
The example is like this. There are 2 hierarchies.
Customer
     Customer 1
     Child Customer
Industry
     Hightech
     Computers
     TVs
Manufacturing
     Auto
     Steel
     Healthcare
     Pharma
     HealthInsurance
The requirement is to add Industry hierarchy as property of Customer Hierarchy and select each customer is what type of Industry they belong as a property value.
Thanks

Use property data type ListGroup for multiselect.
To select values from another hierarchy you can use Node or MultiNode, or an Asscociated Node property, of which there are several types. I'm not fond of the property editors for Node data types and will often just use a string and validate the user input by defaultin prefixes and such with a derived property that is checked by a query based validation. Make sense?

Safari window filled squares with a piece of images from other windows

Similar Messages

Maybe you are looking for