Safari window not filling the screen when launched

I posted this question in the Safari forum and after a week of waiting and numerous bumps, it went unanswered and completely ignored so I thought I'd post it here. Basically what I am trying to do is have the Safari windows automatically fill the screen so that the scroll bar is at the *extreme* right side of the screen, but it always comes just short of that. The reason why this is important is I want to be able to make one quick swipe of my mouse to the right side of the screen and have the cursor end up over the Safari window's scroll bar. But the windows never open up like that, they open up just short of filling the screen so when I move my mouse to the side, it overshoots the scroll bar which is annoying because I have to drag it there manually every time. How do I fix this?

Here is how I want it. Notice the scroll bar with no space to its right.
But here is what it ends up doing. Notice there is now a tiny bit of space to the right of the scroll bar. This tiny space forces me to be careful with the mouse cursor and will not allow me to freely swipe the mouse cursor to the right or it will overshoot the scroll bar. Of course, I can drag the window back to the spot every time I open a new window, but that gets very annoying.

Similar Messages

Live type files look grainy and do not fill the background when used for green screen backgrounds.

live type files look grainy and do not fill the background when used for green screen backgrounds. Ideas?

What I want to do is somehow make my entire iMovie project smaller by compressing it somehow but without losing any footage or audio or quality. At the moment the project is a 56GB iMovie project lasting approx 1hr. I have a mixture of miniDV footage, titles created in Live Type (they are better quality than anything available in iMovie) and audio.
The miniDV footage is automatically compressed when it transfers from my camcorder to my Mac, no worries there.
The LiveType titles contain a motion background (imported into LT) and then text which appears and disappears at set points. The titles vary in length but are about 5 seconds each.
The file size for the LT titles is approx 180MB per clip, the movie requires about 20 or so of these clips, making a very large file size overall.
Is there a way that I can save something in LT so that the file size is smaller yet still keep the quality and use the clip in my iMovie ?

When I'm playing music from my laptop on my Apple TV, I'd like to shrink the album on the screen so it's in the bottom corner, not filling the screen.

When I'm playing music from my laptop on my Apple TV2, I'd like to shrink the album on the screen so it's in the bottom corner, not filling the screen.

I don't believe that's possible. It will either fill the screen, or will show a thumbnail when the screensaver is on (disappearing after a few seconds)

How can I make iPhone 4S Video's fill the screen when using them in iMovie 11 on My MacBook Pro

Hey Guys.
I am a singer songwriter from he UK.... I recently bought an Iphone4s, Ipad and Mac book pro (haha, apple hero, I know). I have always wanted to make the big jump to apple, just was waiting a little while.
I am thrilled so far, it's all great. But, I use Imovie (i am still getting to grips with it, but the features are amazing) to make videos of me singing coversand original videos for youtube.
The Camera on the iphone4s is great.
But, when I import videos into Imovie11, the videos do not fill the screen in their original form.
In some videos, I use the Ken Burns effect. Now, on the parts of my video when I use this effect, it fills the screen as it should do.
Why do the videos in their untampered form not do this? I have tried importing widescreen, original size, and Large, but it alwys sits in the middle of the screen, fairly thin lookin. It fills the screen when it's on my Iphone, I am very lost.
plesse help.
thanks.

if i can offer any more info please just ask

Apple TV Apps Not Filling The Screen

When watching ANY app (Netflix, Watch ESPN, etc.) through my Apple TV 3, the video does not fill the screen. I have about 3 inches on the right and left of my video, even though the videos are in 1080p HD 16:9 aspect. I understand there are issues of mirroring, but this is happening while watching directly through the Apple TV. Is there a fix that I am missing?

It is not the TV, I assure you. It is a feature of the new software update, along with zero connectivity and other issues described in several other posts.
"I have all the same issues. Not enjoying the new update and hoping for a software solution soon. Restarting every piece of equipment and changing cables to direct hard wiring doesn't help on my setup, so... Hoping for the best. In fact, mine all say they can't connect to the internet even though every other device in our household is connected, either wirelessly or via hard wire, without issue.
I can't stream audio or video. It's awesome. But, I'm sure Apple will fix it. It's definitely a software bug to have so many people working fine and then WHAM...
There appear to be many others with the same issue on here. "

Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3 aspect ratio

I am using premiere pro cc. I burned a dvd several times,trying different presets. On each occasion the dvd never fills the screen. It does not lool like letterbox ( 16 x 9 ). There is space all around the picture / video. Need assistance fast,project is already late.Thanks in advance.
Theo Smith

I sent the screenshot via an e-mail attachment. I wasn't aware that
attachments could not be forwarded this way. I will send it again. First time
I've utilized this service.
In a message dated 3/8/2015 10:15:23 A.M. Eastern Daylight Time,
[email protected] writes:
Dvd burned in premiere pro cc does not fill the screen. Desire a 4:3
aspect ratio
created by Peru Bob (https://forums.adobe.com/people/Peru+Bob) in Adobe
Media Encoder (AME) - View the full discussion
(https://forums.adobe.com/message/7264779#7264779)

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!

Tablet version is not filling the screen, any suggestions?

I created a tablet version of my site, pixel width 768 but it does not fill the screen on my tablet. Can you help me troubleshoot this issue?It is flush left and fills about 75% of screen. Also, I cannot center it, although my desktop site is centered.

Awesome! Thank you, yes I did have a box overhang on my master page. I have to wait until my friend comes over today with his tablet to test it but i am sure it will work fine.
I really appreciate your help!

Video image after compressor does not fill the screen

I am trying to convert some videos from DVD to Apple TV. Frame size is 720 x 480. In FCP 5.1.4 when I view the clip in the viewer it looks fine, widescreen with black bars at the top and the bottom, image touching both the right and left edges of the viewer. In the Canvas, however, with Fit to Window selected it shows as a very small box with a lot of black on all sides.
After conversion to mp4, it is even worse. In Quicktime player you can see the video window with grey space at the top and the bottom of the image. However, this is just a very small window in a sea of black. I would guestimate that this window is only using 1/9 of the total screen space.
How can I get the video to fill the screen?

The issue is the AppleTV setting. I've been working this issue for 4 months and can't figure it out.
SO...
I just encode it myself... I use File - Export - QT Conversion - BROADBAND HIGH and set my size in the OPTIONS button to what I want.
Works great for me. And the AppleTV sees it fine.
CaptM

Mobile version of website – not filling the screen

I'm building a mobile version of a website and I want the site to be 221 pixels wide to fit nicely into a mobile device's screen. However, when the site is viewed from a cell phone, it comes up tiny and I have to zoom in to get it to fill the screen.
Anyone know how to make it open zoomed in already?
Here's a link to the site: http://www.lakesideinn.com/mobi/
//Hanna

This solution works great for iPhone but have noticed that it does not work for PC or Blackberry phones. The code I used to fit the page to the screen was "
<meta name="viewport" content="width=device-width; initial-scale=1.0; maximum-scale=1.0;">"
but it does not work on PC or Blackberry
~ Scott

Help with mobile site not filling the screen!

I have published my mobile site and it appears in the top left corner of my iphone screen. How to I get it to fill the screen? www.creativetouchdesign.co.uk

I'm having the same issue - can't figure out what's going on. Hoping this post gets responded to soon.

Why won't my iPad 1 suddenly not rotate the screen when I turn it?

My iPad 1 won't rotate the screen when I turn it. What is wrong?

Hi nugget,
Do you have the Lock Screen switch in the wrong position? It's the switch on the right side just above the volume switch. Try moving it to the opposite position to see what displays on the screen. If the rotate arrow displays, then you are good to go....
Cheers,
GB

I have a 27" Viewsonic 1080p monitor connected to an oldish Mac Pro with an ATI Radeon X1900 XT Graphics card. The problem is that the image does not fill the screen?!?!?

I know the image can fill the monitor, because at start up, the white Apple logo screen fills it up. But once the system starts up, there are bands of black framing the image. I have searched extensively on the internet and found the following clues, none of which solved the problem:
1) In the Windows world you can get software from ATI called Catalyst Converter that gives you the cpaobility to scale the image. This software/feature is not available for Mac users.
2) Viewsonic's web site has a trouble shooting tool. This came up in response to the topic "you have recently upgraded to a larger monitor"
"This could be an issue if you have an older Apple using the system's onboard memory to support both the system and video display. Even if you have enough onboard RAM to support a higher resolution, it will not since the system will use some of the memory. Because the true video RAM available is much smaller than the total onboard amount, the system limits the size of the image. You will need to contact Apple to get an upgrade in onboard RAM or update the complete system."
I have 2GB of RAM, so lack of RAM memory does not seem to be an issue. I am running OS 10.6.8
Does anyone have any clue how to solve this problem. It is frustrating to have a 27" monitor behaving like a 25" monitor.
Thanks in advance for sharing any experience on this.
JD in PA

http://www.xlr8yourmac.com/Graphics/radeon_X1900XT/X1900XT_dust_buildup.html#sto rytop
http://www.xlr8yourmac.com/Graphics/X1900XT_Overheating/ATI_X1900_artifacts.html
http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
http://www.amazon.com/Apple-ATI-Radeon-5770-MC742ZM/dp/B003Z6QH6M/
http://www.amazon.com/PCIe-Power-Cable-nVidia-Video/dp/B002UR1654/
http://www.amazon.com/gp/product/B0036Q7MV0/

MacBook Pro Display (window) shifts off the screen when I move my mouse

With a slight move with my magic mouse, my entire open window will shift completely off the screen with only a part of the window still visible. I have to click on the exposed edge of the window for it to shift back into place. It's only the window of the program that I have open that moves. The dock and the desktop image stays in place. I'm using an HP external monitor now but it was doing this before I hooked up the monitor. I've tried maximizing and minimizing my window but that does not seem to have an effect. Could it be the magic mouse? Thanks in advance for any help.

Wow. The power of Google is truly amazing. Just a little while ago, my husband was going nuts with our computer. I googled the words 'when I move my mouse to the left, the screen moves to the right'. And, Eureka! What do you think was the first thing that popped up on Google?
Well, the answer to my question, of course!:P Which led me right to here. It may not have been me that asked the question, but this did answer MY question!
Apparently this applies to Leopard too. Thanks alot!
Message was edited by: Linda Schodowsky

UIView does not fill the screen in Landscapte mode

Hi,
I have a XIB and an associated UIViewController class, I set
- (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceO rientation {
return YES;
But I found if I open the view, then rotate the iphone to landscape oriention, the view got rotated too. But the view is not expend to fill the space in horizontal direction, the width of the view does not change. Why?
Thanks,
fm

aquador
What is the project preset that you have selected for your Premiere Elements 13 project?
If you do not know, please see readings for Edit Menu/Project Settings/General and the readings for Editing Mode,
Timebase, Frame Size, and Pixel Aspect Ration.
What are the properties of your source media? Does your import fill the Edit area screen when imported?
What file size do you want to import to, 1920 x 1080? If so, is that because your export is not filling your player screen?
If you want to set frame size higher than 1920 x 1080, please see Publish+Share/Computer/XAVC-S and the Advanced Button/Video
Tab for customizing the preset. But a lot of details before we get to that.
Including, what is your player and have you looked at the player settings?
ATR

Safari window not filling the screen when launched

Similar Messages

Maybe you are looking for