Safari won't connect to internet but other browsers will

Firefox and Chrome can connect to the internet but since upgrading to Yosemite, Safari, iTunes and other Apple Apps have an exceedingly difficult time connecting to the internet. (ie server not found) I have to resort to turning off/on my wifi and/or restarting my computer. All other non-Apple applications can access the internet just fine.

I, too, am experiencing this problem. It occurs with both Safari and Firefox. It wasn't bad at the start; occasionally what seemed like my internet would cut out while I was surfing, but then the problem began to last for longer durations. As of this morning, I've been trying to get Safari to open for two hours with no success.
Here's the specifics. I open Safari. Most times, the load bar will extend about 1/6 the length and stop, displaying my homepage address in the address bar. Sometimes, the load bar will creep halfway, and part of my homepage will appear; typically, images don't load, and sometimes the page format gets wonky. Rarely, the homepage will fully load! I can even move through the homepage's image slideshow seamlessly. However, if I try to go to another page, I'm back at the 1/6 occurrence. Very rarely, everything works fine. Closing the laptop or Quitting Safari kills the connection, and I have to start this stupid process all over again. Finally, Firefox is either all or nothing; either the pages load and work fine, or nothing works at all.
I've done a DNS manual adjustment, I've created a specific Network, I've unchecked Safari from the iCloud options, I've run scans for malware and viruses (and came out clean), and I've done a clean reinstall of Yosemite. There's no need for me to tweak my router or contact my ISP; every other wireless application in our house is functioning perfectly. It's not the wifi.
Nothing's working, and I'm about to throw my computer out a window (not really, just frustrated). Any help would be so very appreciated.

Similar Messages

  • EMac won't connect to internet, but other computers will?

    So I've got this problem with my eMac.
    I've been trying to get it to connect to the internet through my cable modem, and it hasn't worked yet. However, all my other computers (including the vista x64 laptop I'm typing this on right now) connect within 3 seconds of being plugged in.
    I've tried plugging the eMac into the both hubs, even plugging it directly into my cable modem, and it still generates some weird IP (169.254.130.32, subnet 255.255.0.0) which isn't even close to right.
    I tried manually inputting the same IP/subnet/gateway info from my laptop, and it still wouldn't connect.
    Any ideas?

    Hi AttackBadger, and a warm welcome to the forums!
    Any 169.254.x.x addy means it's not being dealt an IP from any DHCP device.
    I tried manually inputting the same IP/subnet/gateway info from my laptop, and it still wouldn't connect.
    You'd have to use a different IP than any other on the Network, but same Mask & Router.
    even plugging it directly into my cable modem, and it still generates some weird IP (169.254.130.32
    For that to work since Modems only talk to the last device since powering up, you'd need to power down everything, wait 5 minutes, power up the Modem, wait 2 minutes, power up the eMac.
    Does this Ethernet cable work on other computers?
    The Interface that connects to the Internet, needs to be drug to the top of Network>Show:>Network Port Configurations and checked ON.

  • Safari won't connect to internet but firefox will

    I just set up a home wifi network. Firefox v 22 works perfectly.   However itunes store in itunes fails to open. I also just get a blank screen in Safari with no connectivity to the internet. No address I type into the browser bar generates ANY response. Chrome aso works just fine as a browser, so internet connectivity is NOT an issue. Any ideas on a fix to allow these two Apple products to work?

    Back up all data.
    From the menu bar, select
     ▹ System Preferences ▹ Network
    If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.

  • Safari won't load full html, but other browsers do

    I only see the basic when I open safari, but all other browsers look fine. Why is that?

    You need to do a safe boot in order to prevent third-part system add-ons from loading, and determine whether they're causing your problem. The most common reason for safe booting not to work is that you're using a USB keyboard plugged into a hub, or a non-Apple wireless keyboard. If your keyboard is wired, connect it directly to a built-in port on the Mac, not to a hub.
    If you can't get safe boot to work at all, we'll have to skip that step and proceed to the next:
    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
    Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search.
    Step 1
    Copy or drag -- do not type -- the line below into the Terminal window, then press return:
    kextstat -kl | awk ' !/apple/ { print $6 $7 } '
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Step 3
    launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
    Step 4
    ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
    Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
    You can then quit Terminal.

  • New Touch 3G won't connect to iTunes, but other ipods will. Help!?

    I have itunes 9 and my old nano works fine with it, but when I connect my new ipod touch 3g, I get a message saying "iTunes requires a new version of Apple Mobile Device Support. Please uninstall both Apple Mobile Device Support and iTunes, then install iTunes again."
    I've already uninstalled itunes (and quicktime) multiple times, I even deleted all the music (i backed it up). When connected, the computer recognizes it as a camera.

    Alright, so after 1.5 hours on the phone with Apple, I finally got it to work. For others with the same problem, here's what I had to do:
    1. Control Panel, uninstall iTunes, Quicktime, Apple Software Update, Apple mobile device support, and apple application support. It should be in that order I believe.
    2. Restart computer
    3. Here was my main problem. I needed to download the special version of iTunes for 64-bit vista. You can get it here: http://support.apple.com/kb/DL925
    4. Install as normal
    Reply if this worked for you!

  • Safari won't view QuickTime object - *ALL* other browsers will...

    Ok this is nuts. Our client has a movie that will be viewed mostly by Safari users and it's the ONLY browser it doesn't work in. However, if you paste the URL for the movie into the location bar it loads fine. I'm new at this company and i've been given this support ticket because i'm the only Mac guy in the house. Most Mac issues i can track down, but this one has me floored. Anyone able to help????
    Here's the code for the page...
    <html>
    <head><title>Safari Test</title></head>
    <body>
    <object width="1280" height="730" classid="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B" codebase="http://www.apple.com/qtactivex/qtplugin.cab">
    <param name="src" value="http://boss.streamos.com/download/mousetrappe/epsonsuccessstories/charis 720p.mov">
    <param name="autoplay" value="true">
    <param name="autohref" value="true">
    <param name="controller" value="true">
    <embed src="http://boss.streamos.com/download/mousetrappe/epsonsuccessstories/charis72 0p.mov" width="1280" height="730" autoplay="true" controller="true" pluginspage="http://www.apple.com/quicktime/download/"></embed>
    </object>
    </body>
    </html>

    Ok this is nuts. Our client has a movie that will be
    viewed mostly by Safari users and it's the ONLY
    browser it doesn't work in. However, if you paste
    the URL for the movie into the location bar it loads
    fine. I'm new at this company and i've been given
    this support ticket because i'm the only Mac guy in
    the house. Most Mac issues i can track down, but
    this one has me floored. Anyone able to help????
    Here's the code for the page...
    <html>
    <head><title>Safari Test</title></head>
    <body>
    <object width="1280" height="730"
    classid="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B"
    codebase="http://www.apple.com/qtactivex/qtplugin.cab"
    <div class="jive-quote">
    <param name="src"
    value="http://boss.streamos.com/download/mousetrappe/e
    psonsuccessstories/charis720p.mov">
    <param name="autoplay" value="true">
    <param name="autohref" value="true">
    <param name="controller" value="true">
    <embed
    d
    src="http://boss.streamos.com/download/mousetrappe/eps
    onsuccessstories/charis720p.mov" width="1280"
    height="730" autoplay="true" controller="true"
    pluginspage="http://www.apple.com/quicktime/download/"
    <div class="jive-quote"></embed>
    </object>
    </body>
    </html>

  • Safari won't connect to internet; Firefox will ???

    Safari won't connect to internet; Firefox will???
    Wierdest thing. For some reason Safari won't browse or connect to the internet anymore. When I open Safari the default address is in URL bar, but with highlighted (words only) in blue and it just sits there all day. I can't connect to any web site on the net.
    However, if I open Firefox all is fine and my Mail is all fine also.
    I've repaired permissions a few times and even trashed the preferences for Safari, restarted computer etc, but it still refuses to actually display anything. I get a blank white page, then after about 2 minutes it simply says "Safari can't open the page. Because the server stopped responding".
    As I said, no problem with Firefox.
    Any ideas.

    I thank you for getting me into the right ball-park otherwise I would not have spotted it.
    You're welcome. Glad I could help.
    Please consider marking this post "helpful" next to my name ((you'll need to log-on to the forum).
    Aloha from Big Island.

  • My safari won't connect to sever but I have wifi connection!?

    My safari won't connect to the internet but I have a connection?? How do I fix this

    This worked for a few members:
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712

  • Firefox won't connect to any website, but other browsers will.

    When I enter something in the URL bar -- google.com, localhost, http://127.0.0.1/ an IP address, there's a split second flash, then the bar becomes empty again and nothing has happened. It looks like Firefox isn't even trying to connect to the internet.
    Yesterday, all was well when I was running FF on Windows 7. After the upgrade to Windows 8 Pro, Firefox failed. I upgraded again to Windows 8.1, hoping for the best, but it's the same problem.
    I have walked through the firewall issue, several times (the only one running is Windows' built-in firewall). I eventually uninstalled Firefox, including all my custom settings, and reinstalled from scratch, twice. And even this pure, clean version of Firefox will not connect to the internet.
    I'm a computer-literate web developer and would be happy to look at log files, or run some tool (Fiddler?) to see what's happening at a low level, if only I knew where to look.

    Others with similar problems please look at the article
    * [[Firefox can't load websites but other browsers can]]
    MM..,
    mm... That just about sums up my thought on reading your question. Rather odd this one. I will list some brief ideas and number them to make them easier to refer to or comment on.
    Obviously this does not affect all Firefox 27 on Windows 8. It must be something fairly specific to your setup. I have no idea what your problem is and you have tried some of the obvious troubleshooting steps.
    Rather a general shotgun approach but the best I can do is suggest this list
    # Clean Install <br />Presumably you will have tried deleting the program path files in order to get a clean install.<br /> [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox]]_5-reinstall-firefox <br />(See also note about ESR install)
    # Firefox SafeMode will also have been tried <br /> [[Troubleshoot Firefox issues using Safe Mode]] <br />Remembering to disable or uninstall plugins, safemode does not do that.
    # Try a new clean additional test Profile. <br /> [[Use the Profile Manager to create and remove Firefox profiles#w_creating-a-profile]]_creating-a-profile
    #Windows Safe Mode
    # Install and try Firefox ESR <br /> http://www.mozilla.org/en-US/firefox/organizations/
    #* As a developer you are probably interested in using that anyhow. <br /> Either a customised install as an additional browser <br /> http://kb.mozillazine.org/Testing_pre-release_versions#Installing_multiple_versions <br />Or use the unofficial Firefox portable. http://portableapps.com/apps/internet/firefox-portable-esr
    #* Helps rule out: Firefox code or feature regressions, Corrupted program files
    #* Should quickly enable you to see a working Firefox again
    # Run scans for malware problems with multiple tools
    #* [[Troubleshoot Firefox issues caused by malware]]
    # Is it only network problems ? <br /> Confirm you are you able to open local html files on the same partition ?
    # Firefox's Network Console should throw light on the situation. There is also the Firefox Error Console and Profiler (Profiler is now built in)
    #* https://developer.mozilla.org/en-US/docs/Performance/Profiling_with_the_Built-in_Profiler
    #* https://developer.mozilla.org/en-US/docs/Tools/Network_Monitor
    #* https://developer.mozilla.org/en-US/docs/Tools/Web_Console
    # also see kb.mozillazine.org/Standard_diagnostic

  • Safari, iChat cannot connect to internet but FF and other programs can

    I upgraded from 10.5.8 to 10.6 and the upgrade is mostly very good. SL is nice and snappy, programs launch faster etc however....
    Initially I had the no internet problem which I fixed by trashing the plist files in SystemConfiguration folder and rebooting. So that all worked and I could use the internet however....
    The weirdest thing is that Safari will not connect to the internet, it just loads, then beachballs then I have to force quit it. Software Update does not work - just won't connect to the net and iChat just loads and shows nothing. Preference menu item is greyed out and noen of my accounts are shown there and it can't connect to the net however...
    Very oddly, Firefox, MailPlane, Netnewswire etc all work perfectly and use the internet and all is fine. So there must be something somewhere aside from the plists I have deleted that are not allowing the connection with the Apple apps.
    It's really my first experience ever of having a major issue on a system upgrade. I really don't want to have to do a clean install if I can help it.
    Any help would be great thx.
    Message was edited by: SRV007

    When this occurs it's usually because a proxy is set in the Network preference pane when one isn't needed or vice-versa.
    Firefox uses its own proxy settings and as such doesn't rely on the settings in System Preferences.

  • My mac won't connect to Internet but all other dev...

    hi there my Mac will not connect to the Internet but all other Apple and other devices will connect wirelessly can someone help ? Is it an issue with the IP address to the Mac or is it the DNS which is currently blank?

    Try these manual network settings.
    IP address      192.168.1.50
    Subnet Mask   255.255.255.0
    Default Gateway 192.168.1.254
    DNS Server    192.168.1.254
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Safari won't connect to internet

    Hi, Safari on Ipad will not connect to my wi-fi.  My wi-fi works fine with Galaxy phone and Gateway computer.   I noticed that next to the wi-fi name there is a little swirly thing that keeps spinning like it is trying to update. I have rebooted Ipad several times and also my wi-fi.  Help!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Firefox won't connect to internet but IE will!!

    I'm using latest edition of Firefox on windows 07 laptop. Two days ago my internet connection slowed significantly (i was only one) for few hours but then things got to normal. My computer updated (windows) last night and when tried to turn on firefox it won't connect or load website pages. First it said errror in my connection, now message says 'the connection has timed out'. I have done everything stated on firefox support (checked proxy - am on college network so it was on auto and I switched it to no proxy - no luck), I checked my firewall (managed by mcafee) and even though windows is not being used on my laptop I added firefox just in case - no luck. I did the other steps on the page - no luck. IE is working fine and at reasonable speed so it's not the connection.
    Any help would be greatly appreciated!!
    Edit: don't know if this may help but googlechrome won't work for me either - it opens, and tries to connect to page but never does. . .

    [[https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox?s=cannot+connect+after+upgrading+firefox&as=s]]
    For me the problem was McAfee Security Center running on Windows 7. I reset McAfee and Firefox connected again.

  • TS1398 New IPad mini won't connect to wifi but other technical divices can, HELP!!

    I just bought a new ipad mini and tried to connect it to BT business hub but I waited more than I need to so I turned it off and restared again and i tried 3 times and tried all the ways to connect to wifi on the internet but it still wouldn't connect I need help T-T

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Ipod won't connect to internet but says its on wifi

    Okay so I gave up my iPod for lent and of course as soon as I get it, it has problems. My iPod says it's connected to the network but any and every time I use Facebook or google or really anything with internet and it won't connect. It says its not connected to the internet. I've tried factoryr restoring and it wont work . Yeah I just checked and it said the internet connection appears to be offline. Help?!

    - Try powering off and then back on the router
    - Try resetting your iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    -Try resetting network settings: Settings>General>Reset>Reset Network Settings.

Maybe you are looking for

  • Session timeout while in a bounded taskflow.

    Hi all, I have ADFSecurity configured on project. If a session timeout occurs while we are in view1,(click dialog ok button) is redirect to login. If a session timeout occurs while we are in some-btf,(click dialog ok button) isn't redirect to login.

  • Here we go again. Need some help please.

    Had a lot of probs with first m/b. Finally got them to RMA it at gameve.com   now the m/b seems to be acting right but when trying to install windows XP I keep getting BSOD.   It has happened like 4 times.   Anyone here know a work around for this?  

  • Bex Query is working fine in Bex Analyzer but in Webi 4.0 its not.

    Hi guys, I am using Bex Query as a datasrouce for a Interactive Analysis 4.o. but its giving me the following error below: Note: i can use other Bex Queries just fine in interactive analysis, and this problomatic query is working fine in Bex Analyzer

  • How to handle  spcial different  character  in

    Hi , I  am dealing with EDI data  and I am taking as input and creating out put as xml  but when I am opening the file in  XML spy its gving some error  like. " Your file contains two (2)  characters thats should not be present in the file as  using

  • InDesign Crashes when uploading an article with Web Content Overlay - have checked forums

    I'm making a folio for my design portfolio in InDesign CC I currently have one article uploaded, when I try to add my next article InDesign crashes. I have previously uploaded the article without the single web content overlay and it uploads fine. Th