Safari won't recognize Real Audio
I am having trouble getting safari to recognize real audio. I downloaded real audio for mac, but safari still doesn't recognize it. What can I do to remedy this?
Hi ckermott , & all,
Though not Universal, I downloaded Realplayer v. 10.0.0 (v.352) yesterday for the intel imac, & it works great in Safari, running under Rosetta ( I see no slow down ) click on Safari in Application Folder, Get info, check the box Open using Rosetta.
This is where I downloaded it from, just follow the download steps & quitting safari, as prompts and in the Realpalyer preferences , Media type, save Media types (after it is downloaded & safafri is quit )
http://www.real.com/
Good Luck.
Hope this helps.
Eme;~{)
Similar Messages
-
my macbook with GarageBand '08 won't recognize my audio interface (Alesis iO 26) connected by firewire. any suggestions?
srjinx wrote:
i have a firewire connected. so should i select "built-in" or "system settings" from garageband?
not if you want to use your interface
srjinx wrote:
there is no option on either the main mac system preferences audio input menu nor the garageband preferences menu to select my audio interface as the input.
does the iO 26 require a driver? check the Alesis web site to make sure you have the latest, if it does.
if not, the first suspect would be the cable, try another FW cable.
less likely is one of the FW ports, if you have another FW device you might see if it works on the Mac, for the interface you might need to visit a music store to test it -
I have a MacBookPro with Yosemite and Safari won't recognize the router after sleep unless I restart the computer.
OS X 10.10.1.
Safari Version 8.0 (10600.1.25.1)
WiFi router connects with mail but not SafariSee
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem -
Safari won't recognize my yahoo mail login certificate. says it's bogus.
Safari won't recognize my yahoo mail login certificate. says it's bogus.
Maybe you could provide just a few more details for us. So what I would wonder is, has it done this before or is it a new Mac and your first time trying? If it's not your first time are you using a bookmarked link? Do you show an update for Safari in your Software Updates? If not have you by any chance tried clearing your cache? If that still maybe try going to Safari > Reset Safari?
Hope this is helpful. If none of this works let us know what you've tried and any other information you can think of! -
Logic 8.0.2 won't recognize M-audio firewire 410
Hey, I installed Logic 8.0.2 today and found that it won't recognize my sound card anymore... I updated the sound cards drivers but it still won't find it. Has anyone else experienced this??? Any solutions???
M-audio 410. Well, I´m not surprised. That device is an enemy of mine.
Hope your problem gets solved, somehow.
/j -
ITunes won't recognize my audio CD. What do I do?
I recently installed iTunes onto my computer (Dell with Windows XP), and, although I can successfully run iTunes, the program doesn't seem to recognize my CDs. I've tried multiple CDs,and none of them are recognized. THe GraceNote CDDB screen comes up, and then once that is completed, the CD doesn't show up in the sources list of iTunes. I don't think it is a problem with the drive, since the other music player (MusicMatch Jukebox)I have on my computer runs automatically once the CD is read. If someone has any suggestions to what I should do, it would be greatly appreciated.
INFO:
iTunes version: iTunes 6.0.1.3
ANOTHER NOTE:
I was able to successfully run and import songs to my iPod on the previous iTunes software I had about 3 months ago, but I had to reformat the hardrive due to a virus on my computer (not from iTunes).
Dell dimension 4700 Windows XP w/ pentium 4hi zerodrummer!
hmmm. first, let's try some of the usual suspects:
iTunes for Windows doesn't recognize my audio CDs
... and these resources might help with that:
Updating the drivers on your Windows PC
Where to find firmware for your CD/DVD drive
but if no joy with that, post back with the complete results of your itunes "help > run CD diagnostics" (toonz may be able to spot something amiss there.
we could also try a quick experiment. try inserting a CD with your security packages turned off. (some security software, most notably Norton Internet Security 2005, have been known to interfere with Gracenote queries in odd ways that end up manifesting as a CD recognition problem for itunes.)
keep us posted.
love, b -
Intel iMac won't play Real Audio samples from Amazon
I know this problem could reside with Amazon or Real Audio, but the Apple forum seems the place where knowledgeable and helpful folks hang out, so here goes ...
I've got a brand-new Intel iMac. Going to Amazon, I can no longer listen to sound samples, as they are all in Windows media and Real Audio. The former is not supporting new Macs. As for the latter, I installed (and reinstalled) the latest Real Audio player, but when I try playing an Amazon sound sample, the RA player says "components are missing."
I've already checked my Mac's sound utility to make sure it's at 44.1K (it is, and was), but the problem persists. Any ideas?
Thanks.
intel iMac Core 2 Mac OS X (10.4.8)Hi. I was trying to listen to the Real Audio soundclips for this product:
http://www.amazon.com/exec/obidos/tg/detail/-/B000001HK2/ref=ordcartshr/104-0837028-4891132?%5Fencoding=UTF8&v=glance
Regarding, the VideoLan player, I was under the impression that it would not play through a browser, but required the file to be downloaded first. Is that correct? (Amazon soundclips don't download, I believe.)
Thanks.
G4 Sawtooth Mac OS X (10.3.9)
iMac Mac OS X (10.4.8) -
Safari won't play youtube audio
Safari will not play the audio on Youtube videos. I unenrolled from the Safari HTML5 study (found as an answer to another question), but that did not work. Audio plays on Firefox.
Hi..
Most YouTube content requires the Flash plugin, so try troubleshooting ...
Quit Safari.
Open System Preferences > Flash Player then select the Storage tab. Click: Delete All
Now uninstall the Flash plugin then reinstall new > Troubleshoot Flash Player | Mac OS
Very important uninstall the currently installled plugin first.
Then launch Safari From your Safari menu bar click Safari > Empty Cache
Now try a video.
BTW... if you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. It can also be installed as a plugin in /Library/Internet-Plug-Ins.
And check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to: Open in 32 bit mode is selected, deselect, quit then relaunch Safari. -
OS 10.6.6 won't recognize USB audio input
I've connected an ION USB Turntable to the USB port on my MacBook Pro running OS 10.6.6 and can't get the Mac to recognize the ION as an audio input. I launch Audio Hijack Pro and it only sees the internal mic and the audio input jack. It's as if there is no USB audio source attached. I launched the Sounds control panel and get the same results. I've tried every suggestion that I've been able to find here in the Apple discussions and nothing has resolved the problem.
I've checked the ION site and they say the OS should contain everything required for the turntable to work and they offer no specific "drivers" for it. I checked Apple's support site and found nothing there either.
Any ideas would be greatly appreciated.I'm trying to use two Blue Snowball usb mics for audio input to GarageBand. When I connect them I can see both in the System Profiler (one on each hub with different location ID's) but when I go to the Audio Midi Setup utility to create an Aggregate Device I only see one listed.
Any ideas? -
Safari won't recognize Youtube's ability to link to a certain time
As you probably know, it's possible to link to a certain point in a Youtube video by adding, for example, "#t=1m30s" to the URL and video will start playing at 1 minute and 30 seconds.
For some reason this isn't working in Safari but it is working in Firefox. I've used this feature before in Safari, does anyone have any ideas?bnmeeks wrote:
I just bought a new iMac and used the assistant wizard to transfer all the files from my previous Mac (a dual 2GHz G5). No problem. I have several external drives and one main (1TB) drive that I use as the TM backup drive.
When I went to make my first backup as a user of new iMac, TM is telling me there's not enough space to complete the process. What is happening is that TM is trying to backup my ENTIRE set of hard drives, thinking that, because I have a new iMac EVERYTHING is new and needs a top to bottom back up.
All my backups (which are performed hourly using TM) are still on the TM disk, when i went to look the file structure, this a folder named "Zephyr One" and another (the most recent failed backup) folder named "Zephyr One 2"
A few questions: I can't find where I can change the name "zephyr one" this used to the name of my main hard drive, but I changed that back to Macintosh HD, which is also the name of the drive on my iMac.
Zephyr One is the computer name not the drive name. That's what TM uses to name those folders. Computer name is changed in system preferences->sharing.
The biggest question: how do I get TM to recognize that it doesn't have to do a total backup as if this were the very first backup being done.
you can't. TM will make a full new backup on a new computer. there is no way around that. if you don't have enough space for that i suggest you either reformat the TM drive and start backups from scratch or use a different external drive for new backups.
Thanks -
Safari won't recognize hotmail
When I try to open hotmail in Safari (always on my home computer and sometimes on other computers) I get a pop up window that tells me I may be going on to a site that looks like hotmail but could be an imposter. I click "continue" instead of "cancel," but it redirects me instead to the MSN main page.
This doesn't happen with Internet Explorer. Is anyone else having this problem?Hi again Aleksander,
"Does this mean, I won't be able to use any of the aforementioned search engines in the future"
That's great that Camino is working well with your Hotmail site!
By search engines I believe you are referring to those older browsers? If so, they will still function on some sites but because they were not further developed as long as Camino was for 10.3.9 they will have problems with many sites. Even Camino 1.6.10 will become less and less usable in the future as sites change but for now it is the best that 10.3.9 users can use. I guess we will all have to upgrade our OS's to be able to use more modern browsers in the future
But for now good luck and I'm toasting you with a virtual cup of coffee!
happy holidays!
LS -
[SOLVED] Cinnamon won't recognize my audio device
I'm currently using Cinnamon DE (2.4.5-1).
Expected result:
The sound applet works and shown like in "Mint" (The one I was using before arch);
Laptop FN-keys/Hardware keys can control my volume.
I have checked / found:
Sound applet is added to the panel, but can't find it anywhere.
Alsa is confirmed working (And I can change volume through alsamixer).
Only the volume fn-keys doesn't work, others work (Such as brightness).
There's a "Alsa mixer" applet as a worked around, but the volume is not updated (Unless i change it there) and not responding to my fn-keys.
There's "Start PulseAudio" under start-up entry, I tried manually in terminal and I got
E: [pulseaudio] main.c: Daemon startup failed."
So I think there might be a conflict between the packages I have installed, or do I need to "tweak" around?
If it helps, is there any extra terminal output that I need to provide?
Please advice, thanks.
The sound card/chip:
$ lspci -v | grep -A7 Audio
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Lenovo Device 3977
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at f0710000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
Packages related to Alsa:
$ pacman -Qs alsa
local/alsa-firmware 1.0.28-1
ALSA firmware package
local/alsa-lib 1.0.28-1
An alternative implementation of Linux sound support
local/alsa-plugins 1.0.28-2
Extra alsa plugins
local/alsa-utils 1.0.28-1
An alternative implementation of Linux sound support
local/gnome-alsamixer 0.9.7-1
Gnome ALSA mixer
local/lib32-alsa-lib 1.0.28-1
An alternative implementation of Linux sound support (32 bit)
local/lib32-alsa-plugins 1.0.28-1
Extra alsa plugins (32-bit)
local/pulseaudio-alsa 2-3
ALSA Configuration for PulseAudio
local/zita-alsa-pcmi 0.2.0-1
The successor of clalsadrv, provides easy access to ALSA PCM devices.
Packages related to PulseAudio:
$ pacman -Qs pulse
local/lib32-libpulse 5.0-1
A featureful, general-purpose sound server (32-bit client libraries)
local/libao 1.2.0-1
Cross-platform audio output library and plugins
local/libcanberra-pulse 0.30-4
PulseAudio plugin for libcanberra
local/libpulse 5.0-1
A featureful, general-purpose sound server (client library)
local/pavucontrol 2.0-2
A GTK volume control for PulseAudio
local/pulseaudio 5.0-1
A featureful, general-purpose sound server
local/pulseaudio-alsa 2-3
ALSA Configuration for PulseAudio
This might seems stupid; I have installed some firmware I don't even need:
$ pacman -Qs firmware
local/aic94xx-firmware 30-2
Adaptec SAS 44300, 48300, 58300 Sequencer Firmware for AIC94xx driver
local/alsa-firmware 1.0.28-1
ALSA firmware package
local/b43-firmware 5.100.138-2
Firmware for Broadcom B43 wireless networking chips
local/b43-firmware-legacy 3.130.20.0-4
Firmware for legacy Broadcom B43 wireless networking chips
local/bluez-firmware 1.2-8
Firmwares for Broadcom BCM203x and STLC2300 Bluetooth chips
local/efibootmgr 0.11.0-1
Tool to modify UEFI Firmware Boot Manager Variables
local/ipw2100-fw 1.3-7
Intel Centrino Drivers firmware for IPW2100
local/ipw2200-fw 3.1-5
Firmware for the Intel PRO/Wireless 2200BG
local/linux-firmware 20141201.38e5405-1
Firmware files for Linux
I can find my sound device from terminal.
$ sudo aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC269VC Analog [ALC269VC Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Edit:
$ ps ax | grep pulseaudio
1656 pts/3 S+ 0:00 grep --color=tty -d skip pulseaudio
$ pulseaudio -vvv
... Lots info ...
I: [pulseaudio] module.c: Loaded "module-switch-on-connect" (index: #25; argument: "").
E: [pulseaudio] module.c: Module "module-switch-on-connect" should be loaded once at most. Refusing to load.
E: [pulseaudio] main.c: Module load failed.
E: [pulseaudio] main.c: Failed to initialize daemon.
I: [pulseaudio] module.c: Unloading "module-switch-on-connect" (index: #25).
I: [pulseaudio] module.c: Unloaded "module-switch-on-connect" (index: #25).
... Lots info ...
This is the error part shown in red... I'll searching around see if I can find anything.
Solution found:
Open file "/etc/pulse/default.pa"
And go to the very end, remove/comment one of the line:
load-module module-switch-on-connect
load-module module-switch-on-connect
I didn't touch those file before (installed by default), don't know why the line was duplicated..
I think I know the reason now - I've run the installer multiple times.
helmuthdu/aui/blob/master/lilo#L465
Last edited by Jixun (2014-12-26 15:42:05)I'm currently using Cinnamon DE (2.4.5-1).
Expected result:
The sound applet works and shown like in "Mint" (The one I was using before arch);
Laptop FN-keys/Hardware keys can control my volume.
I have checked / found:
Sound applet is added to the panel, but can't find it anywhere.
Alsa is confirmed working (And I can change volume through alsamixer).
Only the volume fn-keys doesn't work, others work (Such as brightness).
There's a "Alsa mixer" applet as a worked around, but the volume is not updated (Unless i change it there) and not responding to my fn-keys.
There's "Start PulseAudio" under start-up entry, I tried manually in terminal and I got
E: [pulseaudio] main.c: Daemon startup failed."
So I think there might be a conflict between the packages I have installed, or do I need to "tweak" around?
If it helps, is there any extra terminal output that I need to provide?
Please advice, thanks.
The sound card/chip:
$ lspci -v | grep -A7 Audio
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Lenovo Device 3977
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at f0710000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
Packages related to Alsa:
$ pacman -Qs alsa
local/alsa-firmware 1.0.28-1
ALSA firmware package
local/alsa-lib 1.0.28-1
An alternative implementation of Linux sound support
local/alsa-plugins 1.0.28-2
Extra alsa plugins
local/alsa-utils 1.0.28-1
An alternative implementation of Linux sound support
local/gnome-alsamixer 0.9.7-1
Gnome ALSA mixer
local/lib32-alsa-lib 1.0.28-1
An alternative implementation of Linux sound support (32 bit)
local/lib32-alsa-plugins 1.0.28-1
Extra alsa plugins (32-bit)
local/pulseaudio-alsa 2-3
ALSA Configuration for PulseAudio
local/zita-alsa-pcmi 0.2.0-1
The successor of clalsadrv, provides easy access to ALSA PCM devices.
Packages related to PulseAudio:
$ pacman -Qs pulse
local/lib32-libpulse 5.0-1
A featureful, general-purpose sound server (32-bit client libraries)
local/libao 1.2.0-1
Cross-platform audio output library and plugins
local/libcanberra-pulse 0.30-4
PulseAudio plugin for libcanberra
local/libpulse 5.0-1
A featureful, general-purpose sound server (client library)
local/pavucontrol 2.0-2
A GTK volume control for PulseAudio
local/pulseaudio 5.0-1
A featureful, general-purpose sound server
local/pulseaudio-alsa 2-3
ALSA Configuration for PulseAudio
This might seems stupid; I have installed some firmware I don't even need:
$ pacman -Qs firmware
local/aic94xx-firmware 30-2
Adaptec SAS 44300, 48300, 58300 Sequencer Firmware for AIC94xx driver
local/alsa-firmware 1.0.28-1
ALSA firmware package
local/b43-firmware 5.100.138-2
Firmware for Broadcom B43 wireless networking chips
local/b43-firmware-legacy 3.130.20.0-4
Firmware for legacy Broadcom B43 wireless networking chips
local/bluez-firmware 1.2-8
Firmwares for Broadcom BCM203x and STLC2300 Bluetooth chips
local/efibootmgr 0.11.0-1
Tool to modify UEFI Firmware Boot Manager Variables
local/ipw2100-fw 1.3-7
Intel Centrino Drivers firmware for IPW2100
local/ipw2200-fw 3.1-5
Firmware for the Intel PRO/Wireless 2200BG
local/linux-firmware 20141201.38e5405-1
Firmware files for Linux
I can find my sound device from terminal.
$ sudo aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC269VC Analog [ALC269VC Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Edit:
$ ps ax | grep pulseaudio
1656 pts/3 S+ 0:00 grep --color=tty -d skip pulseaudio
$ pulseaudio -vvv
... Lots info ...
I: [pulseaudio] module.c: Loaded "module-switch-on-connect" (index: #25; argument: "").
E: [pulseaudio] module.c: Module "module-switch-on-connect" should be loaded once at most. Refusing to load.
E: [pulseaudio] main.c: Module load failed.
E: [pulseaudio] main.c: Failed to initialize daemon.
I: [pulseaudio] module.c: Unloading "module-switch-on-connect" (index: #25).
I: [pulseaudio] module.c: Unloaded "module-switch-on-connect" (index: #25).
... Lots info ...
This is the error part shown in red... I'll searching around see if I can find anything.
Solution found:
Open file "/etc/pulse/default.pa"
And go to the very end, remove/comment one of the line:
load-module module-switch-on-connect
load-module module-switch-on-connect
I didn't touch those file before (installed by default), don't know why the line was duplicated..
I think I know the reason now - I've run the installer multiple times.
helmuthdu/aui/blob/master/lilo#L465
Last edited by Jixun (2014-12-26 15:42:05) -
Won't recognize my Audio CD's since last update?
Every CD I put into my MacBook Pro mounts as a Blank CD. I get this:
"You've inserted a Blank CD"
Therefore I can no longer import CD's to itunes.
DVDS are fine but Audio CD's not working.If it is an MP3 CD, just put it in the drive and copy the files to your hard drive. Then you can add them to your library.
-
Safari won't recognize adobe reader plug-in
I just purchased a macbook pro and have installed the adobe reader plug-in. Each time that I try to load the same page it directs me to download the plug-in. Where am I going wrong?
The plugin is incompatible. Delete it.
-
FMLE won't recognize audio drivers.
My FMLE will only recognize my microphone as a potential audio input source, and won't recognize RealTek Audio at all. In the dropdown menu, the only option is for the microphone.
Is this a bug, or something I can fix?OK. OS Flavor means: Is it Win7 Home Basic or Win7 Professional or Win7 Starter Edition
m/c: machine details like Core2 Duo with 4 GB RAM...
For RealTek Audio driver: check their website for WIn7 release driver.
Maybe you are looking for
-
Item number in sales order versus delivery not equal
Hello Guru's, Please help me solve this problem, i created a sales order with 6 items in it and save it. Before I create the delivery I deleted the sales order item number 1,2 and 3 so the item that was redy for delivery are sales order items nubmer
-
"Itunes has encountered a problem and needs to close" problem.
Before you read anything, please understand that I am literally being driven to tears right now and that I am on the brink of insanity. On Saturday, I tried to update my iPod with new songs and apps that I got from the iTunes stores since Friday. Itu
-
Is is possible to deploy a C++ webservice in weblogic server ?? Thanks
-
HELP! Prem Pro Upload Driver Issues
Running the 1month trial of Prem Pro CS6 - and still not able to launch. The exact error message reads: "Adobe Prem Pro could not find an capable video play modules. Please update your video display drivers, and start again." I run ATI mobility Radeo
-
Best screen resolution and output for CBT
What would be the best screen resolution and output mode IYO for a CBT (Computer Based Training) program? We would like to do either CD or online. We are toying with either, so which do you think would be a better option for what Captivate is capab