Safari won't start after installing security update 2006-001

today i updated my computer with the latest Security patch. Now my computer wont start the browser
i deleted the preference file on my preferences folder to try to solve the problem, but i still wasn't able to start the browser.
i created a new user and tried to start safari once more, but still the progam crashes before it even starts.
this is the output that i get from the crash reporter
Date/Time: 2006-03-02 16:44:55.777 -0500
OS Version: 10.4.5 (Build 8H14)
Report Version: 4
Command: Safari
Path: /Applications/Safari.app/Contents/MacOS/Safari
Parent: WindowServer [63]
Version: 2.0.3 (417.8)
Build Version: 1
Project Name: WebBrowser
Source Version: 4170800
PID: 445
Thread: 0
Exception: EXCBADINSTRUCTION (0x0002)
Code[0]: 0x00000002
Code[1]: 0x95aadd70
... also the Sofware update softare wont start. It will crash before it even starts.
this is the output from the crash reporter
Date/Time: 2006-03-02 16:43:46.431 -0500
OS Version: 10.4.5 (Build 8H14)
Report Version: 4
Command: Software Update
Path: /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update
Parent: WindowServer [63]
Version: 2.0.5 (2.0.5)
Build Version: 24
Project Name: SoftwareUpdate
Source Version: 1360000
PID: 439
Thread: 0
Exception: EXCBADINSTRUCTION (0x0002)
Code[0]: 0x00000002
Code[1]: 0x95aadd70
any ideas how to fix it?
Powerbook G4 12" 1.5GHz Mac OS X (10.4.5)

- FOR OS VERSION UPDATES YOU CAN ROLL THEM BACK
have to trash the UPDATE10.4.?.PKG file that is located in:
Hard drive> Library> recipts folder> ??.pkg file. (check spotlight search if you cant navigate to the Recipts folder for .pkg files to take out the one for the latest update you have done.
Basically the only way to "roll back" any applications or drivers that are updated is to do an entire Archive and Install of your OS (can do preserving user and network settings and WILL NOT LOOSE ANY DATA) see knowlege base article 107120 for A&I how to. You can always do the software updates later after the A&I.
That particular security update may have been faulty so of course, mabye try the DL again to see what happens and by all means CHECK THE SUPPORT TAB of this site for software updates if you want to do them. IF IT AINT BROKE, DONT FIX IT. most software updates do little or nothing for the application and somtimes they could cause problems LIKE loosing your itunes library when going from 5.0 to 6.0 and so on...

Similar Messages

Mac Pro Won't Start After Installing Security Update Tonight

I just installed the latest security update for Lion on my Mac Pro via software update. The update seemed to install fine. I was about to start work when all of a sudden the system rebooted on its own. Now it just continues to reboot because it can't complete the boot up.
I tried resetting PRAM and SMC, but this didn't help.
I tried booting up from CD using an old SNL disk. I was able to get to disk tools once. I checked my startup volume and disk tools said the volumes is fine. I was checking permissions when once again the system rebooted on its own.
I tried starting up in safe mode, but it only gets so far into the boot process before it reboots.
I tried starting in verbose mode, and noticed several SMC related errors (this is why I tried to reset the SMC). No joy.
If I leave the system sit a few minutes, it gets further into the boot process, but still won't boot completely.
Any suggestions?

Mac Pro tower or MacBook Pro notebook? Which model?
If you are encountering kernel panics, check in the logs as suggested here and post a recent kernel panic log:
http://support.apple.com/kb/HT2546
Mac OS X: How to log a kernel panic

Safari won't start, after installing X Lion

Safari won't start, after installing X Lion

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

After applying Security Update 2006-001 can't launch Office X apps

I noticed that, after applying Security Update 2006-001, I can't launch Microsoft Word nor Excel nor Power Point (Office X, 10.1.6 updated). If I double click the app icon, select and try to open from File menu or try to launch it from the Dock, I get the message "The app has unexpectedly quit". This does not affect Entourage so far. I can open existing files double clicking on their icons and, once the app is running, create new files from menu bar. Repaired permissions, checked for corrupted preferences files or templates but to no avail.
Can anybody help?
iBook G4 Mac OS X (10.3.9) 512 MB RAM

DivX Doctor is a freeware I had downloaded a few days before applying Security Update 2006-01 (http://www.macupdate.com/info.php/id/4683). It certainly was responsible for my problems with Office X apps because, as I said, they completely disappeared as soon as I got rid of it.
I hadn't the memory problems you mentioned (I've applied also Security update 2006-02 without problems).
Don't know if this can help, but you might want to give a try to Disk inventory X (http://www.macupdate.com/info.php/id/14393) [quote]Disk Inventory X is a disk usage utility for Mac OS X. It shows the sizes of files and folders in a special graphical way called "treemaps".
If you've ever wondered were all your disk space has gone, Disk Inventory X will help you to answer this question.[/quote]
Once DiskWarrior fixed a problem with free hard disk space on my machine, even though a small one.
iBook G4

Missing SENT & REPLY email msgs after installing Security Update 2006-008

I'm using Mail Version 2.1 (752/752.2) to handle my Mac.com and Comcast email traffic.
Today I realized that I cannot access/find any of my outgoing email messages sent prior to January 2, 2007. Any emails that I sent prior to that date are missing from my "SENT" mailbox(es). Also, whenever I click on the "Reply" icon next to an incoming email that I answered (prior to 1/2/07) a window pops up with the following message:
"Mail was unable to find your response to the message “(fill in the blank)”. You may have deleted the message."
I am 100% certain that I did NOT delete any of these sent messges.
Coincidentally (?) I installed Security Update 2006-008 (PowerPC) on January 2, 2007 as well. Did this update cause my sent messages to be deleted? Is anyone else having this problem? Anyone have any suggestions to recover/find my missing emails?
Thanks!

I’ll be out for several ours. If Spotlight cannot find those messages, it probably means that they’ve indeed been deleted for some reason. In that case, if you don’t have a backup, your only option would be to try to salvage as many deleted *.emlx files as possible with a data recovery tool such as Data Rescue II, TechTool Pro, or FileSalvage. Of these, the only one I know for sure that can currently recover deleted *.emlx files is FileSalvage. Stop using your computer right now if you want to try that, as anything you do with the computer may cause the deleted files to be overwritten.

Macbook won't boot after installing Security Update 2008-007 (Intel)

I installed security update 2008-007 (intel) on my MacBook last night using Software Update, but now my machine won't boot at all. All I get is the gray start-up screen with the dark gray apple, but there's no spinning progress bar or anything. After 5 minutes or so, the machine auto-restarts, but again hangs on the gray start-up screen. It does this over and over again until I shut it off. I tried to boot into safe mode by holding down shift right after the chime, but it still wouldn't boot (again, not even a spinning progress bar). Can anyone please help me? I really don't want to lose my photos/movies, etc. I'll backup everything promptly if I can just get it to boot. Thanks.

Hi jared-lee, and again, a warm welcome to the forums!
First for safety, "Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
This may or may not fix the problem, but may.
Do you have another Mac around?

System 10.3.9 freezes at startup after installing Security Update 2006-007

I installed the security update 2006-007 this morning and upon restart everything froze once the words "login window starting" appeared.
I tried a bunch of troubleshooting suggestions from the support pages ("Your Mac won't startup in OS X - 10.3.9 or earlier") including starting in safe mode, single user mode and dumping login preferences, network prefs, reset certain priveleges. None of these solved the problem.
Is the only work around for this to re-install the system?
PowerMac g4 dual proc. Mac OS X (10.3.9)

Ed,
I admit to being somewhat perplexed by your experience. But let me ramble a bit here anyway.
My opinion is that problems of the sort that you are experiencing (freeze after a software update) are almost always due to some software problem. (I base this opinion to a large extent on the experiences of other people in these forums.) The fact that your system works okay with Tiger is consistent with this idea.
But, if it is a software problem, why did it not go way when you re-installed Panther? I am wondering how you did the re-install. Was it an Archive and Install? That is the easiest approach and the first one to try, but there are some things it cannot fix. For one, if user settings and preferences are maintained during the A&I and the problem is related to these settings or preferences, then the problem will remain. In that case, an Erase and Install would be needed to clear out everything. Of course, this also deletes all of your data, so it is something you do not want to do unless you have a backup (which you said that you have).
Another thing that an A&I cannot solve is corruption of the filesystem (computer loses track of where some files start and stop on the hard drive). This problem can usually be detected and often repaired by booting off your install CD and using Disk Utility to repair the disk. You said that you used Disk Utility but gave no other details. I take that to imply that you detected no problems. If there are problems and Disk Utility is unable to fix them, a more powerful utility can sometimes do the job, and sometimes there is no solution except to reformat the hard drive and re-install the operating system. This of course destroys all data on the drive.
If there were a hardware problem behind this, the most likely thing in my view would be some bad blocks on the hard drive. I am pretty sure that Disk Utility, as used above, will look for bad blocks and mask them out if any are found. You mentioned something about 1 Gig of RAM. I think that RAM is unlikely to be the culprit. Problems with RAM usually are manifested as more erratic behavior that what you are experiencing.
You have already exhausted many of usual tricks, so what are your options? It sounds like you do not want to buy a copy of Tiger just to fix this and I can understand that. So, you could go to more and more extreme versions of re-installing your software. By this I mean using your Panther install disks to do an Archive and Install, then to do an Erase and Install if the first did not work, then to reformat and do an install if the Erase and Install did not work. Before doing either of these last two step,s you want to be sure that you have backup that you know works. You have said that "re-installing Panther does not fix the problem" and also that you "haven't done a system restore". It is not really clear to me what you mean by re-installing Panther. Was this from a backup or from your install CD?
If you want to avoid a re-install from your install CD as long as possible, then my suggestion is to attempt to troubleshoot the problem further by booting into Single User mode (which I think you have done). Once you get the disk mounted, I would suggest looking in the system.log file for an error message. Once you have mounted the disk, you can look at the end of the system.log file with the command
tail /var/log/system.log
Look to see if any of the messages look like they might be indicative of a problem. If you see nothing, you can print out more lines by doing this:
tail -40 /var/log/system.log
which will cause the last 40 lines to be printed. If you see any message that might be hinting at a problem, post it back here and perhaps someone will get a clue. I should say at the outset that this way of doing things takes a lot of patience and is not guaranteed to provide a solution.
I hope this ramble helps a bit. I know your are frustrated and I hope you get a solution soon.
Rich

Mac book Pro won't start after installing a update, Mac book Pro won't start after installing a update

I installed a update on my Mac book pro, now when I try to start it, it'll come up with the apple logo and a loading bar below it, gets to about 1/4th and shuts down every time.

Hi Jacobmitchell92,
If you are unable to start up past a grey Apple screen after doing a software update, you may find the following articles helpful:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem.
http://support.apple.com/kb/TS4636
Regards,
- Brenden

Mail won't open after installing security update

hi
i just installed the newest security update and now mail won't open. i get the spinning ball of death.
has anyone else had this problem or have any ideas how to fix it without reinstalling everything?
thanks.

hi
i just installed the newest security update and now mail won't open. i get the spinning ball of death.
has anyone else had this problem or have any ideas how to fix it without reinstalling everything?
thanks.

Keep beeping, cannot start, after installing security update. Please help.

I just apply the security update today in my MacBook (aluminum), but then the laptop cannot start.
When starting, it beeps 3X, pauses, then beeps 3X, pauses, and so on - never stops.
I press the power button to stop, but when pressing the power button back on, this keeps happening.
Does somebody also have this kind of issue? What should I do?
Sorry if I may have repeated other reports, I just cannot find here. I googled a bit and somebody tells that beeping 3X relates to graphics device problem. What should I do with this?
Thanks

Hi T,
Yes, that is the key we all are getting while the announced shows the key first presented in the update released as 2010-001, back in January. Nothing else reported besides the SHA1 diff.
I am sorry to tell you but this issue would hardly, if not ever, be related to the update. It seams to be the hardware fault in fact, test each memory in each slot, one at a time trying to boot the 4 times, 3 in the case, you are already up with this mem/slot combination.
Good luck.

Firefox won't start after installing an update from Apple - what to do?

I am not computer savvy. When I installed a recent update from Apple on my Mac. Firefox won't open. Safari wouldn't either, but an Apple tech led me through steps to fix it. He didn't know what to try for Firefox.
== right after update was installed and Mac restarted ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; PPC Mac OS X 10_4_11; en) AppleWebKit/533.16 (KHTML, like Gecko) Version/4.1 Safari/533.16

Then a clear CMOS would be the next logical troubleshooting step.
Here is a link to your motherboard specifications.
The information on clearing CMOS is at the bottom of the document.
This is usually the last step before giving up on a motherboard.
The problem you are facing is motherboard hardware firmware related.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Mac mini server won't reboot after Installing security update 2010-003

This has already been posted and remaines "unanswered".
After updating to Snow Leopard Server 10.6.3 and attempting to reboot, the mac mini (HDMI) hangs on the gray apple logo with progress spinning. It takes me several times to force the mac mini to power down and try again, before it finally loads the login screen.
any suggestions?

Odd.
So it's hanging while starting services, it looks like, the firewall in particular, have you tried a safe boot?
If not, hold down the shift key right after you hear the power-on chime, keep holding it till you see a spinning gear.
This boots up without extra kernel extensions and fonts, clears font caches, and runs a disk verify and a repair if needed. If you still can't boot reliably in safe mode, you may need to run an archive/install.

Security Update 2006-001 Killed network preferences

After upgrading with the 2006-001 Security Update, none of my network preferences will set up correctly anymore. DHCP doesn't seem to be doing anything, and when I tell it to use a manual address via the system preferences, it appears that it's not actually doing anything. Mac OS System Preferences will not even detect that I have an ethernet cable plugged in, though if I use ifconfig and route I can get a LITTLE bit of traffic to go out, so I know it's connected and working.
Any one have any ideas on this? Absolutely frustrating because I can no longer work until this is fixed (sitting in an internet cafe trying to figure out what the problem is). I'm running 10.3.9 on a 1.2Ghz 12" Powerbook. I don't remember my Unix days well enough to try to manually set up routes and our DNS settings, nor do I know if the appropriate tools are in Mac OS, but the Apple network preferences are clearly busted.
Is there anyway to uninstall an update?
Patrick
12" 1.2 Ghz PB Mac OS X (10.3.9)

I had the same Network & Airport issue after installing Security Update 2006-001 on my wife's iBook G3 running 10.3.9 Trying to access our Airport base station wirelessly would inevitably hang as I selected the Airport network.
I noticed that every time I shut down the computer there was a brief showing of the keychain window asking to allow keychain access...this right as the computer went down (no chance to hit the allow button).
Spent the better part of an entire afternoon trying to fix this problem. Then read all the posts here (amazing how many people have problems with this update). Tried to reset permissions - didn't work. In the end, I rebooted the Airport...went into the Airport Admin Utility with my PowerBook to fiddle around...removed our Airport network from the keychain in my wife's iBook...explored other aspects via the keychain access utility.
None of that seemed to work. I also figure I reset the permissions about half a dozen times (with subsequent reboot). None of that was working either...until after one permissions reset & reboot things came good. I got the keychain window, allowed access, and hey presto...online. So far it's been OK for over 12 hours (including after reboot).
What exactly worked? I don't know. "It's a mystery".
One thing's for sure...this update is not going on any of my other machines!
Come on Apple...surely you can do better than send us automatic updates that break our computers and sap our time!
iBook Mac OS X (10.3.9)

Security Update 2006-001 causes huge loss of memory

After running Security Update 2006-001 and updating Garageband, iPhoto and iTunes, per Software Update, my available GB of memory was reduced from approximately 110 to about 35! Yikes! What could have caused this, and how can I fix it?

Don't confuse memory & hard drive space. Running applications uses memory; storing files (application or document) use hard drive space. If you run memory-hungry apps, you may need to increase the RAM in your Mac to avoid slowdowns due to your Mac swapping data in memory (RAM) out to the hard drive. If you don't have adequate hard drive space to spare for this (usually 5 GB minimum, or 10% or more of your hard drive's free space), you may get crashes or other problems.
In any case, deleting files (from the hard drive) won't change the amount of memory (RAM) your Mac uses. That is controlled by the OS, in response to the demand of the application(s) you run. OS X has very good memory management; generally, all you will see is slowdowns if the demand is greater than the installed RAM can handle.
Are you seeing any problems, or are you just concerned that memory use is higher than you expect?

Security Update 2006-001 - The return?

Hello!
According to my software update which popped up after waking the computer I should install the latest security update (PowerPC), even though I installed it just a couple of days ago. Or, that's what I think...
Should I just go ahead and install this 'second edition' too, or is there a way to check if the first update was installed properly (and to check that it actually happened)?
Thank you!
PowerBook G4 Aluminum Mac OS X (10.4.5)

I installed security update 2006-001 last week and my SU shows nothing futher. And further, there is nothing further. Either your SU prefs are corrupted or it did not install properly.
Look in /library/receipts to verify that you have that receipt.
-mj
[email protected]

Safari won't start after installing security update 2006-001

Similar Messages

Maybe you are looking for