Safe Title is not viewable

I have Final Cut Pro version 5.0.4. In both my viewer and canvas I can not view the safe action/title area. Overlays and range check work fine. I can see the blue safe action/title lines only in the kayframe overlays. If I uncheck safe title it goes away in the overlays. So it appears this has moved to the background somehow. I have trashed the prefs, trashed the application & receipts and re-installed the software. The safe title was there when I had 4.5 but did this strange thing when I upgraded to version 5. Any suggestions? Thanks.

I have a screen shot after loading a sequence into the viewer and canvas that clearly show the problem kjpcnn and I are having. In the canvas the right two vertical lines of the overlays are visible (after dragging the clip into a sequence) but will go away once you move the playhead. The overlays are non existent in the viewer. "Show Overlays" and "Show Title Safe" are checked in both the viewer and canvas. I was going to post the 240KB JPEG on my downloads page however either .mac is having problems or there is way to much traffic tonight. I will try sometime tomorrow. I can also send the file to anyone interested, just send me an email.
Wayne

Similar Messages

Image title tooltip (not alt text) doesn't work

There are half a dozen or so existing help requests mentioning alt text or discussing problems with the Google Toolbar add-on, but this is not my issue, so I am opening a separate help ticket.
If you are here about "alt" text, first read any of the posts explaining that "alt" text isn't supposed to appear, it's just a quirk of IE that it sometimes does, FF4 is correct and does what the standards ask and what other browsers do. You want "title" text. The best explanation seems to be:
https://support.mozilla.com/en-US/questions/804893
If you have the Google Toolbar installed, turn it off and see if you get them back. This is a known issue, eg:
http://support.mozilla.com/en-US/questions/740139
See also:
https://support.mozilla.com/en-US/questions/803441
https://support.mozilla.com/en-US/questions/775410
https://support.mozilla.com/en-US/questions/802284
https://support.mozilla.com/en-US/questions/751043
Now, still not getting tooltip popups for here or here?
http://www.xkcd.com/
http://www.asofterworld.com/
Neither was I. I *did* get them in safe mode, but I did a lot of resetting and mucking about without any luck. In the end, after doing a text diff between safe mode and not, of the Troubleshooting information (in the Help menu), I found that the issue might be Direct2D-related, and changed the flag "gfx.direct2d.disabled" to true in about:config. I now have tooltips back but a less efficient FF4.
Hope that this helps someone, and hope that the Direct2D issue gets sorted out!

There are half a dozen or so existing help requests mentioning alt text or discussing problems with the Google Toolbar add-on, but this is not my issue, so I am opening a separate help ticket.
If you are here about "alt" text, first read any of the posts explaining that "alt" text isn't supposed to appear, it's just a quirk of IE that it sometimes does, FF4 is correct and does what the standards ask and what other browsers do. You want "title" text. The best explanation seems to be:
https://support.mozilla.com/en-US/questions/804893
If you have the Google Toolbar installed, turn it off and see if you get them back. This is a known issue, eg:
http://support.mozilla.com/en-US/questions/740139
See also:
https://support.mozilla.com/en-US/questions/803441
https://support.mozilla.com/en-US/questions/775410
https://support.mozilla.com/en-US/questions/802284
https://support.mozilla.com/en-US/questions/751043
Now, still not getting tooltip popups for here or here?
http://www.xkcd.com/
http://www.asofterworld.com/
Neither was I. I *did* get them in safe mode, but I did a lot of resetting and mucking about without any luck. In the end, after doing a text diff between safe mode and not, of the Troubleshooting information (in the Help menu), I found that the issue might be Direct2D-related, and changed the flag "gfx.direct2d.disabled" to true in about:config. I now have tooltips back but a less efficient FF4.
Hope that this helps someone, and hope that the Direct2D issue gets sorted out!

Why are lyrics not viewable in itunes in the same way as on the ipod?

Why are lyrics not viewable in itunes in the same way as on the ipod? In itunes all you get is "Get Info" then "Lyrics" and that screen then locks itunes until you close it. Inflexible, annoying and surely unnecessary?

All songs need Album, Artist and title.
Also, look under Artist -> Compilations.

Safe Title and Action Areas ...screwy set up!

Does Adobe Premiere have the Safe Title and Action Areas set up ...backwards? (i.e screwy)
I am resetting the areas according to latest Broadcast specs ( New Zealand) issued by BC Authority. '2012 Commercial Production Standard'
Quote from Spec sheets
High Definition (1920 x1080) with 4:3 Graphics safe and 14:9 Action Safe areas
14:9 Action Safe = 80% of 16:9 Width . 93% of Height
4:3 Graphics Safe = 65% of 16:9 Width . 90% of Height
So one reads that as: area covering 80% width and 93% height (and respectively area covering 65% width and 90% height)
(Area is the operative word as in Safe Area)
If these figures are entered into Premiere Project Set up..they display small areas. Inverse size.
Not areas proportional to the figures describingthe area. eg 80, 90 and 93% are certainly closer to 100% ( the whole area)
So what gives here?
FWIW: In the past I have used the 20, 20 and 10, 10 set up ..without actually thinking why it was done this way!
Out of interest : anyone got access to these specs for BBC or U.S stations. How are they described?
Here is how Wiki describes the safe area
http://en.wikipedia.org/wiki/Overscan

Thanx for posting that.
BTW: See Page 11 for the way BBC prescribe setup for Safe action Area.
Like NZ BC..it describes the inclusive safe area. Not like Premieres (screwy excluded area setup)
14:9 Caption safe
70% of Active Width
90% of Active Height
289 – 1632
55 – 1026
48 to 532 (F1) and 611 to 1095 (F2)
Be keen to see some U.S Specs

Safe Title randomness..what is going on here?

CS7 / Win 7
Here are my standard Safe Title Area Markings. (30, 10) per NZ Broadcast Spec.
So note above...there are additional markings apart from the ones I have pointed at with red arrows! What are they?
Here they are if I make my setting "0, 0". (0, 0 are the out side ones with the centre marks vert and horizontal).
Note how the random ones become full height "meaningless nothing markers" !
I cant figure what they are..where they come from and I will call them a bug if others can reproduce the issue.
I will screen grab and post how they are supposed to work as they do in CS6 if requested.
Not being able to lose them is my issue. Hopefully I have missed something?

CS4:
CS5:
CS6:

TS2530 When I put a burned cd from one Mac into another Mac, song titles do not show up! I have to enter them manually! My CD player reads the titles that i on the cd; how can I get my Mac to do so?

When I put a burned cd from one Mac into another Mac, song titles do not show up! I have to enter them manually! My CD player reads the titles that i on the cd; how can I get my Mac to do so?

The problem is that I burned these CD's myself from music that I added from my personal collection to iTunes. The INFO is ON the CD's (it appears perfectly when I put the CD in my Numark mixer...so I know the info is on the CD), but for some reason, my MAC PRO will NOT read the info on the burned CD when I place the CD into the MAC PRO. The CD was burned on a MAC that I no longer own. But there HAS to be a way to transfer songs from a burned CD with the INFO that is on the CD burned with iTunes.
PLEASE HELP!
-Old Appel

My song titles do not show up in the list format. What can I do to fix this?

I'm trying to manage my iPod music and my song titles are not showing inthe list format. Does anyone know how I can fix this?

VLC

Applet not viewable in browser

Hi
applet not viewable in browser any website that uses java code seems not to run on my browser though it runs normally well on my friends computer. The browser shows a screen area in grey colour with an error message like "Exception: java.lang.ClassNotFoundException:GUIDemo.class" (im using Win NT4 and IE 5.5) checked the tools/internet options/advanced seettings the browser support is enabled. tried installing the newer version of JRE still not working ..Please guide about any settings that need to be modified or how can i fix this problem ..
Regards
anant
[email protected]

Hi
Just a thought, but what broswer are you and your friend using? Are they different by any chance?
There is an inconsistency between browsers and java, and unfortunately it can result in the error you saw.
Basically, bog standard Internet Explorer uses its own JVM, whereas Netscape, Mozilla, Opera etc tend to use the java plug-in. To make matters worse, if you install the plug-in on a machine that has Internet Explorer installed, it over-rules the Microsoft version to make itself the default (but this can be undone by looking in the Options menu for Java-plugin and un-ticking the box). Give that a try first.
Another cause that I have encountered was when using NT on a network, which had been configured not to accept Java Applets at all! Are you on such a network, or stand alone?
Hope that helps.

Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.

Hi
I just now updated dec 2013 c.u to sharepoint server 2010 sp2
I get this error in event viewer when I browse web applications , they not open even
Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Process Name: OWSTIMER
Process ID: 3836
AppDomain Name: DefaultDomain
AppDomain ID: 1
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
Active Endpoints: 2
Failed Endpoints:1
Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
adil

This messge I get initially I get two times (1)
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Process Name: w3wp
Process ID: 4600
AppDomain Name: /LM/W3SVC/2141356646/ROOT-1-130405218187772398
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
Active Endpoints: 2
Failed Endpoints:1
Affected Endpoint: http://spfapp02:32843/548f72e6a39f401e95e92711aea13c45/MetadataWebService.svc
aftert this message three times (2)
The Managed Metadata Service 'Managed Metadata Service' is inaccessible.
and after (3)
The health service has removed some items from the send queue for management group "MOJOmanagement" since it exceeded the maximum allowed size of 15 megabytes.
after (4)
Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
and this time I seen I am unable to browse web applications
and
Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
adil

TS2776 I purchased an Itune Audio Book using a borrowed Windows Computer and Downloaded the book to that Computer. I than tried to sync to my IPod Nano (7). I received an error Message " THe [title] was not copied to the Ipod [name] Becuase you are not au

I purchasd an ITune Audio Book using a borrowed Windows Computer. After the Download I attempted to Sync and was told that I was synced to a different [something]. It then asked if I wanted to sync to this [Something] I said yes. IT wiped all the stuff off my IPod then gave the following message:
The [title] was not copied to the iPod [name] becuse you are not authorized for it on this computer.
How can I get this to work?
It considered the computer pretty acceptable when it took my money for the title. I think I have been ripped off.
THis whole SYNC is an innecessay step. Why can't I just download stuff to my iPod (from any sourch by the way) and delete it from my iPod when I don't want it any more.

Hello LeaMinovitch,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes Store: Authorize or deauthorize your Mac or PC
http://support.apple.com/kb/ht1420
To authorize a computer, follow these steps:
Open iTunes.
Choose Store > Authorize This Computer from the menu bar.
You may need to show the menu bar to see this option in Windows. In earlier versions of iTunes, you can access this option from the Advanced menu.
Enter your Apple ID and click Authorize.
If your Apple ID uses an expired MobileMe account, you can still authorize your computer.
In some cases, iTunes may ask you to authorize the computer again. iTunes should use the same authorization as before if the computer is in your list of authorized computers.
Learn what to do if iTunes repeatedly asks you to authorize when you try to play your content.
Best of luck,
Mario

PDF files created in Pages have text not viewable on PC

I have created a large (7 MB) program for a large conference in Pages. In order to have it printed, I converted it to a PDF. For some reason, some of the text on some pages is not viewable on PCs using Acrobat Pro or Reader - it should be black and is showing as white text.
What could be the problem? This does not happen on all PCs, only some. Has anyone experienced this in the past and is there a solution? Of course, my deadline is rapidly approaching...the conference starts on the 26th. Any help is greatly appreciated.
Thanks!
Eden

I am having the same problem when exporting to PDF AND Word files. My document looks great in Pages and in Preview, but half of my text is converted to white when viewed in Acrobat Reader or Word. This is very FRUSTRATING!! I have a deadline approaching, too, and am collaborating with another shop that works on PC's. Any ideas for how to fix this issue are very welcome!

G4 iBook works in Safe Mode, but not in regular mode (stuck on blue screen)

14" iBook G4 1.2GHz with 1 gig of RAM.
I recently had an issue with this machine in that the image on the screen would freeze but the cursor would be able to move around. This was narrowed down to an issue with the logic board. I wanted something a little more permanent than a shim, so I sent the board in to have it reballed.
After installing the maching back into my iBook, it seemed to work fine until I applied a software update to the machine.
It was then that I got to experience the first of many kernel panics.
Restarting at different times always brought me to the dialog box which states that the machine needed to be restarted in multiple languages.
Running the Apple Hardware Test off my install disks yielded this error code: 2ATI/2/4:113-xxxxx-125
I have no idea what that means. I do know that just before I got the results of the test, the screen changed to all kinds of colors. It was only for a few seconds and then the results (with the error code) were displayed.
Still, not sure what to do next, I tried resetting the PRAM. I also tried resetting the NVRAM.
I also tried booting up into Safe Mode which actually worked. There were no issues with the machine and everything seemed to be working fine.
When I tried to restart the machine in regular mode, I'm taken to the infamous blue screen and the machine just stays there. When I let the machine stay off overnight, it booted up normal, but after applying the software update, the machine was in kernel panic again.
I've tried running fsck, but nothing changes.
I'm still not sure why it seems to work in Safe Mode but not in regular mode.
I'd appreciate any suggestions or ideas.

Hi,
A couple of the things that are disabled in safe mode are AirPort and non Apple startup items. The easiest thing for you to test is the AirPort card. Shut down and remove the AE card under the keyboard. See if it starts. If it does your AE card is bad. If not, start in safe mode and go to System Preferences>Accounts>youraccount and disable all non Apple startup (LOgin) items by clicking on them and then the minus sign. Restart normally and see if it will start.
John

Set up LAMP server, but not viewable from outside.

I set up a LAMP server, followed the guide http://wiki.archlinux.org/index.php/LAMP there. I can view it from localhost or the IP address or the web address http://plaufcan.homeunix.org. But it is not viewable outside of my local network. What else do I have to do?

If your router is showing an external IP address of 192.x.x.x, I am guessing that you are on a DSL line, and that you more than likely used the windows setup software to configure your internet connection.
Basically, when you run the software, many of the modems go into a very dumb router configuration. Your router is picking up a natted ip address from the modem, and using that to update dyndns.
# nslookup plaufcan.homeunix.org
Non-authoritative answer:
Name: plaufcan.homeunix.org
Address: 192.168.2.101
I'll bet you dollars to donuts that you can open your browser and go to http://192.168.2.1 (or alternatively http://192.168.2.254) and you'll get access to the modem. You'll have to find the page that allows it to be set to a bridge. After that, you'll have to set the router up to do any authentication that your ISP requires.
One of the large ISP's in Canada use modems like this for their DSL, and it causes no end of problem when SOHO users add another router. NATted NAT connections do not always play nice.

The title does not show up in the Program Sequence window in PP CC

I am trying to add a simple title in one of the clips of a video that I am editing. I can see the title in the title window with the clip in the background but when I play the video the playback doesn't show the title but the clip.
How can I can I solve this problem? I am using a trial version of PP CC.
Thanks

I looked at the video. I did exactly the same thing. What do you mean by "poke out the eyeball on that track"? Do you refer to the little icon on the top right corner of the title window that has an eye?
I have just done the following test: I created a colored background (green) and dragged that on the video track above my project then I added the title above this colored background on a third video track. Now the title shows up in the program window but the background is black not green. So it looks like that the title does not have a transparent background.

Leopard mail.app jpg attachments not viewable

Some PDF and Jpg attachment are not viewable in the message and a blue cube with white question marks appear in both sending, sent and received emails. This is a new phenomenon which started last week.

I have solved the problem on my mac:
1- Save the attachment to the Desktop.
2- Press CMD+I in the file
3- Change the "Open With" option to another app.
4- Change the "Open With" option to the desired app (Preview to Imagens antd PDF's...)
5- Choose "Change All"
6- Press OK.
Now i can see the images and PDF's on my mail's body.

Safe Title is not viewable

Similar Messages

Maybe you are looking for