Safe to remove firmware files?

Hello All,
I have had the two recent firmware updates installed (SMC, EFI) and all went well. I now see the two files under the Utilities folder:
1. MacBook Pro SMC Firmware Update
2. MacBook Pro EFI Firmware Update
It is safe to remove these two files I suppose?
Thanks!

It is safe to remove these two files I suppose?
Correct. Unless a new logic board is installed, they no longer serve any purpose.
(39008)

Similar Messages

  • Is it safe to remove setup32/setup64 files from the uninstall\third party directory?

    Found 2 setupfiles in the %PROGRAM FILES%\common files\adobe\installers\uninstall\thirdparty\{GUID}\Adobe Photoshop lightroom 5 ccm directory.
    SAFE to get rid of them?  living a limited c:\ SSD boot device... so gotta be thrifty... Thanks!

    Hi Raj,
    The “Everyone” share access is a remnant of legacy Exchange functionality (pre-Exchange 5.0). 
    For Exchange 2003, we do not see any Microsoft Exchange 2003 dependencies upon those shares. 
    From the Exchange perspective, it is safe to remove the “Everyone” share permission. 
    However, there may be any 3rd party applications which still use Exchange 2003 in a legacy fashion, their ability to access proxy DLLs/addressing templates, and reading diagnostic logging pages may be hampered.
    To mitigate such a risk, I suggest we can replace “Everyone” with “Authenticated Users” in order to bypass any audit concerns, yet still allow 3rd party applications to access those shares. Additionally, here is a KB descripted the detailed functions about
    these shared folder:
    http://support.microsoft.com//kb/812290
    Regards,
    Winnie Liang
    TechNet Community Support

  • What is the diffrence between cookies and cache, is it safe to remove cache?

    what is the difference between cookies and cache , is it safe to remove cache ? . I had cleaned cookies many times but I have not removed cache , does it goes on increasing day by day ? please let me know

    Cookies are small files that contain information useful to a web site -- such as password, preferences, last date visited, etc. You may remove the cookies that you don't want adn since some of them are a privacy issue, many people remove them all.
    Cache is just a collection of data downloaded to help display a web page. After you leave a site, much of the cache is left on your computer and is no longer needed. You can always remove the cache because it will be replaced as needed.

  • How do I find and remove hidden files

    For some reason, after the recent install of SL my 1TB drive is extremely bloated. I have deleted or moved just about everything possible from the disk (excluding system files and applications) and it still shows that I only have 94.08 GB of space available.
    Is there a good piece of software out there that will help me to find out if there are several hidden files and remove what is unnecessary?

    Wow ... that was enlightening. I discovered that somehow there is a hidden folder on the 1TB drive entitled "volumes" and within that folder is a subfolder entitled "Mega Drive" (my self-titled name for the 1TB boot drive), which is an exact duplicate of my previous hard drive.
    A little more about how I got here. I had to computer in to the Apple Store, after upgrading to SL, for what I initially though was a hardware issue. The Genius felt it was software, did an erase and install. When I got the macing back I tried to us Migration Assistant to copy files from my Time Machine drive, it took all night so I wasn't awake when it finished. I suspect that is where this folder came from, as the next day I could not find the information on my computer, so I started manually moving the files from that drive.
    The bottom line is this ... is it safe to remove trash this entire folder?

  • No longer safe to remove iPod after updating (synching)

    I'm using iTunes 7 on XP Pro. AMD Athlon 64. 4G 60-gig iPod (color).
    "Enable Disk Use" is NOT checked, but my iPod now shows up as a Removable Disk in XP. And after synching, iTunes says "iPod update is complete" but no longer tells me it's safe to remove my iPod.
    Yes, I can manually eject the iPod, but that's a bit of a pain. I'd rather just grab it and go. Any ideas?
    (Please don't tell me, here in the WINDOWS forum, that buying a Mac will solve all my problems. Another answer like that will send me into the nearest clock tower.)

    Well, I believe you should keep it because you may need it later.
    Try to delete other files on your computer, or backup some of the data to CD-R, DVDR or external hard drive and then remove them.

  • Is it safe to delete .dmp files in the Program directory?

    I found a rather large .dmp file located in my Firefox install directory:
    c:\Program Files (x86)\Mozilla Firefox\core.20130617.XXXXXX.XXXXX.XXXX.dmp
    It appears that the core file is tagged with a date stamp; the subsequent "X's" are other numerical digits but I'm masking those out since I'm not sure they're relevant. Is it safe to remove this? Note that this file doesn't appear in about:crashes.

    Delete it and reboot the computer, make sure firefox is not open, as windows usually makes those when you get BSOD's.

  • SD CARD SLOT NOT SHOWING ON "safe to remove hardware" list ***NEWBIE**

    i have purchased my very first imac and i have installed windows 7 through bootcamp. the first problem i have encountered is that when i insert a sd card or a back up drive via the usb port i do not get the "safe to remove hardware" icon i normally get on my pc. i am able to eject the sd card via the computer option when i right click the sd card i get the eject option but i do not get the option when i right click the portable hard drive. i have tried the "rundll" option wia "cmd" the "safe to remove hardware" box appears but the sd card and the portable hard drive do not appear. its as if the computer is not aware of anything in the slots.
    when attaching multiple files in yahoo mail with a pc you just press the shift key does anyone know the equivilant for mac keyboard ?
    thanks in adavance for your help

    Hi,
    odd...
    If you open the Windows Explorer where are the SD-card and the USB-HD shown ?
    Are they shown in the 'removable' section ?
    Is thse USB-HD a 'Windows'-only HD or have you partitioned it to a Windows and a Mac OSX partition ?
    Have you tried a different USB-port on your iMac for connecting the HD ?
    What file system (FAT32 or NTFS) and what partition scheme (MBR or GPT) is used on the HD ?
    And on the SD-card as well ?
    As for the shift-key I don't that irregularity when using BootCamp Windows, but maybe that's because I still use WIndows XP with it.
    Might be a very far reached guess, but who knows...: try the key-combo 'fn+shift-key' to enable/disable the scroll-lock... (very far.... I know).
    Stefan

  • My firmware file is not compatible is says ?, my firmware file is not compatible is says ?

    It wont update my iphone. It says that the firmware file is not compatible.

    I have been having the same issue with my phone. I have gone thru tech support and have done everything that they told me to do and it still didn't work. I got a message yesterday saying that there was an update for itunes so I updated my itunes. I reset my phone back to factory settings and restored it using the itunes. When I tried updating my phone before I was just going directly from itunes to my phone. Instead of doing that I just downloaded the update just to itunes. After I downloaded the update i plugged in my phone and updated it from the downloads section of my itunes. It worked, although after the download I tried to open my phone and couldn't get past the home screen. I tried to shut it down but it wouldn't respond so I hard booted the phone and so far have had no problem with it yet. I did not have to remove any security software on my system for this update. It has been very frustrating for me but my phone seems to be working properly now and has taken the update. I hope this helps everyone. By the way I have a 4s.

  • Is it safe to remove "en-US" from System32 ?

    Recently, after adding the French and English (United Kingdom) language packs to an image and installing that image, I selected "fr-FR" as the primary language of the system. I removed the en-US language pack using DISM, but its folder is still
    present in System32. Is it safe to remove this folder ?

    Hi,
    Why did you want to delete this folder? Its size is so small for your whole computer.
    This symptom is normal. "fr-FR" is your primary language. However, system main file need English to display and run many files.
    I would like to suggest you don't delete it in order to run system smoothly.
    Karen Hu
    TechNet Community Support

  • Is it safe to remove multiple hostname.mboxlist.date directories

    Hi,
    I have several hostname.mboxlist.date directories besides mboxlist directory in server_root/msgconf/store directoryoccupying much space. Can anybuddy let me know is it safe to remove these directories ? As its my production server, so I can't take any risk of data/db corruption.
    Thanks in advance.

    I remember answering this for you before.
    How old are these? Recent?
    Messaging Server does snapshot your database, and you can set how often, and how many to keep.
    If you have OLD files, likely Messaging Server didn't create 'em.

  • Safe to remove Windows 7 and install XP instead?

    Hi,
    I've been thinking about something recently; I probably won't do this until a while, but for now, it's just an idea.  I'm using Linux Ubuntu on my Lenovo Thinkpad E420, and it really work like a dream.  I use Windows 7 way less, and I only keep it for a few reasons.
    I find it too bad that Windows 7 use so much disk space, however!  20GB for the system alone, in fact (For Ubuntu, it's 4.5GB, with all the softwares).  I'm sure Windows XP will do the same job that Windows 7, even running a specific game that wouldn't work under Seven.
    I know you're all wondering why would I use Windows XP when his support is ending in 2 years?  Well, instead of using 20GB, the system will use only 1.5GB.  That's 18.5 GB of Extra for Ubuntu.  It also demand way less ressources than Windows 7.  I do not plan on browsing on Windows XP, I'll do this in Ubuntu.  Simply put, the only stuff I'm going to do on XP are:
    - Playing a few games (The most recent game being 2007);
    - Using Adobe Creative Suite CS5 (Along with Adobe Premiere and AfterEffect CS4, maybe);
    - Maybe using Microsoft Office 2007 or 2010 (Run well in Ubuntu using Wine);
    I know a lot of people still using Adobe Creative Suite CS3 while CS6 is out, so I don't see the problem of still using CS5 even when CS8 will be released.  And CS6 is supported for XP as well (Except for Premiere and AfterEffect).
    The only disadvantage I could think of is that Windows XP x64 would manage only 2 of my 4 CPUs..  Will this be noticeable on performances?
    So I was wondering about this, will it be safe to remove Windows 7 and install XP x64 instead?  Did the 1GB "System_DRV" partition still be necessary?
    I am also aware that installing XP will erase GRUB bootloader for Linux, but I know the way to restore it.  I also burned my recovery DVDs from Windows 7.
    Thanks for your advice!
    Solved!
    Go to Solution.

    I've been doing some ressearch, and I found out that as much odd as it seems, Windows Server 2003 would be a better choice.  Because the 32-Bit version would be able to manage my 8GB of RAM and my 4 CPUs without problem, unlike XP.  I also thought that Server 2003 would use less battery than XP.
    So I created another NTFS partition to install Server 2003, check if this work before removing Windows 7 !
    To make the setup boot proprely, I had to set the hard-disk to "Compatibility Mode" in the BIOS, otherwise I would get a BSOD (Same for XP).
    The first part of the setup was successful, the files were correctly copied to the Windows 2003 partition I chose.  Then my laptop rebooted, and Server 2003 got.. confused.  Server 2003 would have proceeded to the second part of the installation, but booted from the first partition used by Windows 7.
    As I was expecting, Windows Server 2003 deleted Windows 7 bootloader as well as GRUB for Linux.
    I succesfully restored Windows 7 bootloader, and I am able to boot to Linux using my CD of GRUB.  I'm now going to restore GRUB, but something unexpected happened.
    For some reason, GParted - the partition editor for Linux - wouldn't see anymore partition.  I'll have to check how to fix this on the Ubuntu Forums.  The partitions are still there, just no more visible by GParted - There are visible by Windows 7 and my GRUB CD, however.
    There's something else I would like to understand as well; Windows Server 2003 randomly messed up something else: The files got copied in the right partition, but why did it randomly deleted my Lenovo_Recovery partition (Which was the last on the disk)?  Is there a reason for that?
    So here's the main question of my post: is there a way to recover this partition?  It's not visible by Windows 7, not by GRUB as well.  Why was this partition used for, exactly?
    I should mention that I still have my recovery DVDs I burned from Windows 7.  Was this partition still required?
    Thanks for the reply.
    I think I'll have to stick with Windows 7, then. XD  In fact, I'm "lucky" Server 2003 haven't deleted anything else (I do have a full image of Linux).

  • TS3694 how do you update the firmware file on the iphone 4? says it wont update because firmware is not compatible

    iphone update is saying firmware is not compatible, anybody know how to update firmware

    Pretty sure I just downloaded the .exe files to the SD card (I have a directory called "drivers" there & ran from Windows, no need to boot from anything else. Didn't even need to use Safe Boot. The files do need an .exe extension IE someimes downloads as _exe. No idea why but would just need to rename if download has the underscore and not the period. The you can run them.
    Was so easy I really did not think about it. One of the Intel Platform drives does say "requires 1.60 update" so that is the one you need. Do the 1.60, reboot, and then the Intel update.
    Key point is the release note on the Intel Platform Installer
    "Release Notes
    1.Please install the  Windows BIOS version 1.60 or higher for Encore WT8-A (PDW09x) before installing this Intel Platform Installer update." note this says "BIOS" and not "USB BIOS" which is a smaller file.

  • HT201210 i cant restore the new updates because the firmware file was corrept what i have to do to solve that problem

    when i tried to update my Iphone 4 (software version:4.3.3)  it gives me a message that i cant update my phone because the Firmware file was corrupt.
    can you help me to solve that problem

    Welcome to the Apple community Kobra.
    Unfortunately, you cannot do very much with your phone unless you get assistance from the previous owner, they should either provide you with the password to unlock it or remove their account from the phone entirely remotely through iCloud.com > Find My Phone.

  • I keep getting blue screen and error message to remove this file from system. spooldr.sys

    HP Officejet 4500 Wireless All-in-One Printer - G510n    w/operating system     Windows XP Professional
    I installed the printer in February and the disk did not finalize the setup process.  I went online and
    down loaded the drivers and software that was offered from the HP website.
    The printer works, but as the months have gone along, I keep getting updates for the printer and
    the system needs to reboot and it does automatically.
    Now I am getting a blue screen with a critical dump error message.  HP error reporting keeps sending
    the same message back to restore to earlier date before the updates.  That worked for awhile.  Now
    HP Error system says that malware has corrupted and needs to remove system file     spooldr.sys
    Is this in your driver software.  Spooldr is the system that caches pages of data for printing in chronological
    order....
    Can I uninstall my software and drivers and change to the plain & simple, print and scan to prevent the
    spool driver from loading to my system?

    Thank you for your input.  But, It is amazing that you can tell me that I was infected with  rootkit. 
    Without information as to how to fix, your information is after the fact and useless.
    I used the Safety Scanner provided to me by HP.  A full scan didn't detect any Malware in any files on my system.  But the last screen dump provided the information that   spooldr.sys  was corrupted and  needed
    to be removed.  
    Coming into HP Form, I did read on the HP website that my system Windows XP Professional was not listed
    and noted that the software may have not been just what I needed.  This was the reason for the question
    about uninstalling and reinstalling less of the program.  I really don't need my printer to print backward and
    that is all I see that it is doing that other printers don't.
    Besides, Kudos goes to the person from HP who sent the email,  suggesting I used the HP Update software and drives recommended  for my computer system.  Computer, printer is working, back to normal and hasn't taken a dump since, I uploaded  software and drives for Windows XP Professional.

  • TS3694 When trying to update or restore my Iphone I get an error message saying...could not be restored because firmware file is not compatible.  What is this and how can it be resolved?

    When trying to restore or update my Iphone 4 it errors out with message:..."could not be restored because the firmware file is not compatible."  How do I resolve this?

    Ask him if he has 'jailbroken' the ipod touch. Some jailbreaking firmware resets it to Ipad firmware and so it is very difficult to restore as itunes simply doesnt recognise it for what it is. It's Apple's solution to try and stop mass jailbreaking.

Maybe you are looking for

  • Vertical alignment in xhtml

    Im having problem with getting text and object to vertical align in div's. I cnat get them to position as i want them without position them with either margin/padding og using absolute position... Anny advise ??

  • Error in loading WFT from workflow loader

    I am trying to load wft from workflow loader with following command wftload.bat /mode forceupload /debug true /user of_user/password passwd /connectstring "(DESCRIPTION =(ADDRESS_LIST =(ADDRESS = (PROTOCOL = TCP)(HOST = testhost)(PORT = 1521))) (CONN

  • Loadbalancing HTTPS with stickyness

    Hi all, We 'd like to do HTTPS loadbalancing with stickyness ( cookie stickyness). Is it possible ? how to configure It. I've tryed to configure as following but it seems that the client does not receive the cookie. sticky http-cookie INAMI-OWA-PRD I

  • Saving layout in transaction MIGO

    Good afternoon, Does anybody know if it is possible to save a layout in the transaction MIGO. One of our users wants to change the order the columns appear. He sorts his order but we are unable to find a way to have this order as the default (i.e. th

  • QT Pro, worth it?

    I am having trouble with iMovie&my digital camera. My camera imports videos as .avi files. I have tried changing this but I can't anywhere. iMovie doesn't accept .avi files (however on certain occasions it works no problem, strange). Anyway, I have h