Safe to replace gcc with gcc-multilib?
It seems to me that every single useful package requires that I replace gcc-libs with gcc-libs-multilibs, binutils with binutils-multilib, and gcc with gcc-multilib, and it's frustrating. I'm trying to install pipelight in order to be able to do online schooling in Arch instead of having to switch to windows all the time, but I'm leery about replacing all these packages due to countless problems I've had with gcc-libs in the past. Is it safe to replace all these packages? Can't name any right now but there's been quite a few extremely useful packages that I won't install because it requires me to replace all these packages.
EDIT: I'm sorry, correction, this doesn't happen with pipelight specifically. It happens when I try to install a dependency; wine-silverlight. Yaourt also tells me that it's an unsupported and potentially dangerous package, although I didn't see anything signifying that in the AUR. I'm starting to believe yaourt says this about every package.
Last edited by xworld (2014-01-16 20:42:45)
All AUR packages are unsupported, may be potentially dangerous and you should inspect the PKGBUILDs before using them to build and install packages.
If you're using a 64-bit system and have to use multilib, you do install lib32-* or *-multilib packages, nothing wrong with that. Why do you think it's unsafe?
xworld wrote:I'm leery about replacing all these packages due to countless problems I've had with gcc-libs in the past.
Any examples?
Similar Messages
-
Gcc update breaks with gcc-multilib
What should I do? I cannot just uninstall gcc-multilib as many packages depend on it.
$ $ sudo pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
multilib is up to date
:: Starting full system upgrade...
warning: grml-zsh-config: ignoring package upgrade (0.7.4-1 => 0.8.1-1)
resolving dependencies...
looking for inter-conflicts...
:: gcc-libs and gcc-libs-multilib are in conflict. Remove gcc-libs-multilib? [y/N] y
:: gcc and gcc-multilib are in conflict. Remove gcc-multilib? [y/N] y
error: failed to prepare transaction (could not satisfy dependencies)
:: libtool-multilib: requires gcc-multilib=4.8.0akurei, i had the same messages a while ago everytime gcc was updated in extra but multilib lagged behind.
On my system the problem was caused because i had missed replacing a compiler (gcc-objc in my case ) with its multilib counterpart.
As long as gcc-libs-multilib was the same version as gcc-libs everything worked.
I suggest you run pacman -Sl multilib and check if you miss something in that list you do use the multilib version of.
Last edited by Lone_Wolf (2013-04-16 14:40:39) -
[solved: I am a dope] Can gcc and gcc-multilib coexist?
If I try to install gcc-multilib, it conflicts with my existing 64-bit gcc package. Is there a way for me to install it in another path or install the binaries from gcc-multilib as gcc32, g++32 etc?
Last edited by rhd (2012-02-20 02:50:55)rhd wrote:
I'm learning 32-bit assembly and the tutorial I am using has a small collection of example code and a little library which needs a 32-bit copy of libgcc.a.
libgcc.a is owned by gcc and not gcc-libs and so here I am, attempting to install the multilib package instead of the 64-bit version. The -m32 flag doesn't help. [edit: the -m32 flag to gcc, which tells it to compile for a 32 bit arch]
$ nosr libgcc.a
core/gcc
community/arm-elf-gcc-base
community/arm-wince-cegcc-gcc
community/avr-gcc
community/mingw32-gcc
community/mingw32-gcc-base
multilib/gcc-multilib
I tried to point out that gcc-multilib provides gcc. Everything gcc does, you can do with gcc-multilib. You can't have both installed at the same time (but you wouldn't want/need to, either).
Last edited by falconindy (2012-02-18 15:01:10) -
Pacman complains with `"gcc-libs" is not in the package set` message
Hi,
today I wanted to do full system upgrade, but this happened:
# pacman -Syu
:: Synchronizing package databases...
current 69,7K 84,9K/s 00:00:01 [#################################################] 100%
extra 323,1K 17,5K/s 00:00:18 [#################################################] 100%
community 312,4K 219,0K/s 00:00:01 [#################################################] 100%
:: Starting full system upgrade...
:: Replace scrollkeeper with extra/rarian? [Y/n]
warning: apr: forcing upgrade to version 1.2.9-1
warning: dnsutils: forcing upgrade to version 9.4.1_P1-2
warning: ruby: forcing upgrade to version 1.8.6_p36-3
warning: sudo: forcing upgrade to version 1.6.9p4-1
warning: xpdf: forcing upgrade to version 3.02_pl1-1
resolving dependencies...
error: cannot resolve dependencies for "rarian" ("gcc-libs" is not in the package set)
error: failed to prepare transaction (could not satisfy dependencies)
:: rarian requires gcc-libs
It's obvious that gcc-libs package is missing in current package. I've found one similar problem here http://bbs.archlinux.org/viewtopic.php?pid=283439. But I cannot solve it like that. I have current file included in /etc/pacman.conf already. I've also tried to change current to core and make the /etc/pacman.d/core file and it complained too:
# pacman -Su
:: Starting full system upgrade...
:: Replace util-linux with current/util-linux-ng? [Y/n]
:: Replace scrollkeeper with extra/rarian? [Y/n]
warning: apr: forcing upgrade to version 1.2.11-1
warning: apr-util: forcing upgrade to version 1.2.10-1
warning: dnsutils: forcing upgrade to version 9.4.1_P1-2
warning: ntp: forcing upgrade to version 4.2.4p4-2
warning: ruby: forcing upgrade to version 1.8.6_p111-2
warning: sudo: forcing upgrade to version 1.6.9p5-1
warning: xpdf: forcing upgrade to version 3.02_pl1-1
:: pacman has detected a newer version of the "pacman" package.
:: It is recommended that you allow pacman to upgrade itself
:: first, then you can re-run the operation with the newer version.
:: Upgrade pacman first? [Y/n]
resolving dependencies... done.
looking for inter-conflicts... done.
Targets: pacman-3.0.6-1
Total Package Size: 0,80 MB
Proceed with installation? [Y/n]
checking package integrity... done.
cleaning up... done.
(1/1) checking for file conflicts [#################################################] 100%
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
pacman: /etc/pacman.d/core exists in filesystem
errors occurred, no packages were upgraded.
The last upgrade was almost perfect but now strange things happens. :^(
Can anyone help me to solve this, please??kishd wrote:Did you replace current with core in your pacman.conf file?
yes, the second output is related to pacman.conf with `current` replaced with `core` .... and good to say, that I did NOT forgot to update repositories with `pacman -Sy` before upgrade ;-) -
First, there are some compilation problems with the latest linux kernel and Tools 9.9.2's source of vmhgfs: vmhgfs module not compilable for VMware Tools 9.9.0 (Fusion7.1) after Ubuntu Linux kernel update to 3.13.0-46-generic (Febr. 2015) (Shared Folder Feature not working in Ubuntu 14.04 LTS (Guest) on MacOSX Yosemite (Host))?
In short, you have to patch the source to get it to compile: rasa/vmware-tools-patches · GitHub
Arch linux is a "rolling" distro, meaning we always have latest - and are usually the first to find problems before it trickles down to Ubuntu, Mint, Debian and other Linux distros. Well, now there is a serious problem that is unresolvable.
The vmhgfs source is not compatible with linux kernels built with gcc 5.1.0. It hard locks the VM, requiring a hard reset when the kernel module loads. It also hard locks during vmware-tools-install.pl torwards the very end when it says, "Guest filesystem driver" enabling. And on boot, it is vmhgfs that is being loaded when the VM hard locks.
I was able to get around this earlier when gcc 4.9.2 was in core - i just rebuilt the kernel under 4.9.2: https://bbs.archlinux.org/viewtopic.php?id=196915
Obviously that isn't a long-term solution. But now that gcc 5.1.0 has been pushed out to core, that means recompiling the kernel under 4.9.2 is no easy feat since dependencies now depend on gcc 5.1.0.
@Developers: We have a big problem with VMware Tools vmhgfs and kernels compiled under gcc 5.1.0. Given it make take years before the Debian distros get the latest and greatest, it's coming.
Because of this, and the wasted time in me having to support this mess, I may recommend to my company we no longer continue with our Enterprise account of 100 licenses of Workstation and Fusion. It is obvious in the previous thread vmhgfs module not compilable for VMware Tools 9.9.0 (Fusion7.1) after Ubuntu Linux kernel update to 3.13.0-46-generic (Febr. 2015) (Shared Folder Feature not working in Ubuntu 14.04 LTS (Guest) on MacOSX Yosemite (Host))? that VMware is no hurry to resolve even the simple build errors that the community has resolved last year with patches. Good thing too, renewal comes up in two months.
I shiver to think how long it will take VMware to release a fix for gcc 5.1.0.Additional info...
The hard lock is a panic when mounting the /mnt/hgfs partition, which is what is configured in my fstab:
.host:/
/mnt/hgfs
vmhgfs
defaults
0 0
The reason the above is just "./host:/" is for the auto-mounting of shares on the fly, or all shares on boot. Specifying a share doesn't change anything.
Even mounting it manually panic's the kernel:
mount -n -t vmhgfs .host:/<shared_folder> /home/user1/shares
Again, this all worked fine with a kernel built on 4.9.2, but not 5.1.0. -
Create a dll for windows with gcc
hello!
I have made a program in 'C' under linux and i want to make it into a dll with gcc to use it in labview under windows.
Has anyone already done a such thing? so what is the magic option to pass to gcc to make it properly?
Thank you.vincent72 wrote:
Thank you for your replies. unfortunately, these options don't work on our computer. the keyword 'declspec' wasn't reconnised by our gcc. we also tried the keyword '__attribute ((dllexport))__' but it didn't work anymore.
I think the standard gcc attribute is more
something like attribute(export). After all gcc environments typically
use shared libraries and not DLLs. But then again not every gcc
compiler will be able to just create proper Win32 executables. As
explained already, there needs to be quite a lot in the toolchain for
the intended target.
For instance the compiler/linker should support COFF library format in
order to create a valid Win32 executable file unless you have a your
own format specific Win32 compatible loader that gets linked in and
understands your library format. Also declspec() is a Microsoft
specific extension not supported by off the shelf gcc. And gcc has no
intentions to add anything they consider non-standard, and most
Microsoft extensions are non-standard.
MingW does come with a patched gcc, that supports the most important
things to be able to create valid Win32 executables but most other gcc
versions don't.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
Help!Apache compiling with gcc in Solaris 10
Greetings
I am having problems with Apache 1.3.
When I am running the script ./src/Configure my output is:
#./Configure
Using config file: Configuration
Creating Makefile
+ configured for Solaris 2100 platform
+ setting C pre-processor to gcc -E
+ using "tr [a-z] [A-Z]" to uppercase
+ checking for system header files
+ adding selected modules
./helpers/TestCompile: make: not found
+ using builtin Expat
./Configure: make: not found
+ checking sizeof various data types
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
./helpers/TestCompile: make: not found
+ doing sanity check on compiler and options
./helpers/TestCompile: make: not found
** A test compilation with your Makefile configuration
** failed. The below error output from the compilation
** test will give you an idea what is failing. Note that
** Apache requires an ANSI C Compiler, such as gcc.
======== Error Output for sanity check ========
./helpers/TestCompile: make: not found
============= End of Error Report =============
Aborting!
I am root, my PATH is
/usr/bin:/usr/ucb:/etc:/usr/local/bin:/opt/netscape:/usr/css/bin/:/bin:/usr/openwin/bin:/usr/sbin:/
I am missing something stupid, I know but I can't find it!!!!Help please I am a newbie.
I am curious. Has anyone been able to compile succesfully apache server with gcc in Solaris 10?
Thanks,Thanks,
It was only that.!!!
But now I have the following problem, I can't create executables when I type make. The output is:
when I am in the src/folder
#make
===> regex
<=== regex
===> os/unix
gcc -c -I../../os/unix -I../../include -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I../../lib/expat-lite -DNO_DL_NEEDED os.c
In file included from /usr/include/sys/wait.h:24,
from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:292: error: parse error before '}' token
/usr/include/sys/siginfo.h:294: error: parse error before '}' token
/usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
/usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
/usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
/usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
/usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
/usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
/usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
/usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
/usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
/usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
/usr/include/sys/siginfo.h:426: error: parse error before '}' token
/usr/include/sys/siginfo.h:428: error: parse error before '}' token
/usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
/usr/include/sys/siginfo.h:437: error: parse error before '}' token
In file included from /usr/include/sys/procset.h:24,
from /usr/include/sys/wait.h:25,
from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
In file included from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/wait.h:86: error: parse error before "siginfo_t"
In file included from ../../include/ap_config.h:1096,
from os.c:21:
/usr/include/signal.h:111: error: parse error before "siginfo_t"
/usr/include/signal.h:113: error: parse error before "siginfo_t"
*** Error code 1
make: Fatal error: Command failed for target `os.o'
Current working directory /web-download/apache_1.3.33/src/os/unix
*** Error code 1
The following command caused the error:
for i in regex os/unix ap main lib modules; do \
echo "===> $i"; \
case ".Solaris 2100" in \
.OS390 | .TPF) ( cd $i && make SDP='' OPTIM='') || exit 1;; \
*) ( cd $i && make SDP='' CC='gcc' AUX_CFLAGS=' -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I./lib/expat-lite -DNO_DL_NEEDED ' RANLIB='ranlib' OPTIM='') || exit 1;; \
esac; \
echo "<=== $i"; \
done
make: Fatal error: Command failed for target `subdirs'
but when I am typing one step up is.
===> src
===> src/regex
<=== src/regex
===> src/os/unix
gcc -c -I../../os/unix -I../../include -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I../../lib/expat-lite -DNO_DL_NEEDED os.c
In file included from /usr/include/sys/wait.h:24,
from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:292: error: parse error before '}' token
/usr/include/sys/siginfo.h:294: error: parse error before '}' token
/usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
/usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
/usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
/usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
/usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
/usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
/usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
/usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
/usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
/usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
/usr/include/sys/siginfo.h:426: error: parse error before '}' token
/usr/include/sys/siginfo.h:428: error: parse error before '}' token
/usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
/usr/include/sys/siginfo.h:437: error: parse error before '}' token
In file included from /usr/include/sys/procset.h:24,
from /usr/include/sys/wait.h:25,
from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
In file included from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/wait.h:86: error: parse error before "siginfo_t"
In file included from ../../include/ap_config.h:1096,
from os.c:21:
/usr/include/signal.h:111: error: parse error before "siginfo_t"
/usr/include/signal.h:113: error: parse error before "siginfo_t"
*** Error code 1
make: Fatal error: Command failed for target `os.o'
Current working directory /web-download/apache_1.3.33/src/os/unix
*** Error code 1
The following command caused the error:
for i in regex os/unix ap main lib modules; do \
echo "===> src/$i"; \
case ".Solaris 2100" in \
.OS390 | .TPF) ( cd $i && make SDP='src/' OPTIM='') || exit 1;; \
*) ( cd $i && make SDP='src/' CC='gcc' AUX_CFLAGS=' -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I./lib/expat-lite -DNO_DL_NEEDED ' RANLIB='ranlib' OPTIM='') || exit 1;; \
esac; \
echo "<=== src/$i"; \
done
make: Fatal error: Command failed for target `subdirs'
Current working directory /web-download/apache_1.3.33/src
*** Error code 1
The following command caused the error:
case "xi86pc-sun-solaris2.2100" in \
x*390*) C89STEPS="0xffffffff"; export C89STEPS;; \
esac; \
cd ./src; make SDP=src/ all
make: Fatal error: Command failed for target `build-std'
Current working directory /web-download/apache_1.3.33
*** Error code 1
The following command caused the error:
make -f ./Makefile root= build-std
make: Fatal error: Command failed for target `build'
I am newbie with Solaris and gcc so I have no so much idea what is missing there.
Thanks,
Juan -
How to compile DNG SDK with GCC?
I tried to compile DNG SDK with GCC, but I got stuck to the following error message:
... dng_flags.h:33:28: error: RawEnvironment.h: No such file or directory ...
In other words, it seems that file 'RawEnvironment.h' is missing. I cannot find this file from DNG SDK or XMP SDK. Do you know where I could find this file or do you know how to compile DNG SDK with GCC?
Regards SamiPlease define either qMacOS or qWinOS (i.e., in your list of preprocessor defines). As you can see in line 32 of dng_flags.h this is required.
-
Hi all,
I have trying to set up Apache server in Soalris 10, and to compile with gcc but I am having problems.
The first part of ./configure --prefix=... is fine, but when I type make I am getting this:
# make
===> src
===> src/regex
<=== src/regex
===> src/os/unix
gcc -c -I../../os/unix -I../../include -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I../../lib/expat-lite -DNO_DL_NEEDED `../../apaci` os.c
In file included from /usr/include/sys/wait.h:24,
from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:292: error: parse error before '}' token
/usr/include/sys/siginfo.h:294: error: parse error before '}' token
/usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
/usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
/usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
/usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
/usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
/usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
/usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
/usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
/usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
/usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
/usr/include/sys/siginfo.h:426: error: parse error before '}' token
/usr/include/sys/siginfo.h:428: error: parse error before '}' token
/usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
/usr/include/sys/siginfo.h:437: error: parse error before '}' token
In file included from /usr/include/sys/procset.h:24,
from /usr/include/sys/wait.h:25,
from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
In file included from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/wait.h:86: error: parse error before "siginfo_t"
In file included from ../../include/ap_config.h:1096,
from os.c:21:
/usr/include/signal.h:111: error: parse error before "siginfo_t"
/usr/include/signal.h:113: error: parse error before "siginfo_t"
*** Error code 1
make: Fatal error: Command failed for target `os.o'
Current working directory /web-download/apache_1.3.33/src/os/unix
*** Error code 1
The following command caused the error:
for i in regex os/unix ap main lib modules; do \
echo "===> src/$i"; \
case ".Solaris 2100" in \
.OS390 | .TPF) ( cd $i && make SDP='src/' OPTIM='') || exit 1;; \
*) ( cd $i && make SDP='src/' CC='gcc' AUX_CFLAGS=' -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I./lib/expat-lite -DNO_DL_NEEDED `./apaci`' RANLIB='ranlib' OPTIM='') || exit 1;; \
esac; \
echo "<=== src/$i"; \
done
make: Fatal error: Command failed for target `subdirs'
Current working directory /web-download/apache_1.3.33/src
*** Error code 1
The following command caused the error:
case "xi86pc-sun-solaris2.2100" in \
x*390*) C89STEPS="0xffffffff"; export C89STEPS;; \
esac; \
cd ./src; make SDP=src/ all
make: Fatal error: Command failed for target `build-std'
Current working directory /web-download/apache_1.3.33
*** Error code 1
The following command caused the error:
make -f ./Makefile root= build-std
make: Fatal error: Command failed for target `build'
# svcadm
Usage: svcadm [-v] enable [-rt] {FMRI | pattern}...
svcadm [-v] disable [-t] {FMRI | pattern}...
svcadm [-v] restart {FMRI | pattern}...
svcadm [-v] refresh {FMRI | pattern}...
svcadm [-v] mark [-It] {degraded | maintenance} {FMRI | pattern}...
svcadm [-v] clear {FMRI | pattern}...
svcadm [-v] delegate restarter_FMRI {FMRI | pattern}...
svcadm [-v] milestone [-d] milestone_FMRI
# svcadm -v
Usage: svcadm [-v] enable [-rt] {FMRI | pattern}...
svcadm [-v] disable [-t] {FMRI | pattern}...
svcadm [-v] restart {FMRI | pattern}...
svcadm [-v] refresh {FMRI | pattern}...
svcadm [-v] mark [-It] {degraded | maintenance} {FMRI | pattern}...
svcadm [-v] clear {FMRI | pattern}...
svcadm [-v] delegate restarter_FMRI {FMRI | pattern}...
svcadm [-v] milestone [-d] milestone_FMRI
# make
===> src
===> src/regex
<=== src/regex
===> src/os/unix
gcc -c -I../../os/unix -I../../include -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I../../lib/expat-lite -DNO_DL_NEEDED `../../apaci` os.c
In file included from /usr/include/sys/wait.h:24,
from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:292: error: parse error before '}' token
/usr/include/sys/siginfo.h:294: error: parse error before '}' token
/usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
/usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
/usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
/usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
/usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
/usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
/usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
/usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
/usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
/usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
/usr/include/sys/siginfo.h:426: error: parse error before '}' token
/usr/include/sys/siginfo.h:428: error: parse error before '}' token
/usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
/usr/include/sys/siginfo.h:437: error: parse error before '}' token
In file included from /usr/include/sys/procset.h:24,
from /usr/include/sys/wait.h:25,
from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
In file included from ../../include/ap_config.h:1079,
from os.c:21:
/usr/include/sys/wait.h:86: error: parse error before "siginfo_t"
In file included from ../../include/ap_config.h:1096,
from os.c:21:
/usr/include/signal.h:111: error: parse error before "siginfo_t"
/usr/include/signal.h:113: error: parse error before "siginfo_t"
*** Error code 1
make: Fatal error: Command failed for target `os.o'
Current working directory /web-download/apache_1.3.33/src/os/unix
*** Error code 1
The following command caused the error:
for i in regex os/unix ap main lib modules; do \
echo "===> src/$i"; \
case ".Solaris 2100" in \
.OS390 | .TPF) ( cd $i && make SDP='src/' OPTIM='') || exit 1;; \
*) ( cd $i && make SDP='src/' CC='gcc' AUX_CFLAGS=' -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I./lib/expat-lite -DNO_DL_NEEDED `./apaci`' RANLIB='ranlib' OPTIM='') || exit 1;; \
esac; \
echo "<=== src/$i"; \
done
make: Fatal error: Command failed for target `subdirs'
Current working directory /web-download/apache_1.3.33/src
*** Error code 1
The following command caused the error:
case "xi86pc-sun-solaris2.2100" in \
x*390*) C89STEPS="0xffffffff"; export C89STEPS;; \
esac; \
cd ./src; make SDP=src/ all
make: Fatal error: Command failed for target `build-std'
Current working directory /web-download/apache_1.3.33
*** Error code 1
The following command caused the error:
make -f ./Makefile root= build-std
make: Fatal error: Command failed for target `build'
And I have no idea what is the problem. Has anyone experience the same?
I am newbie so...
Thanks,
JuanCompiling Apache 1.3 with gcc on linux or unix? If you are using unix, I would be compiling with cc and not gcc. You have gcc set to compile using regular expressions and I believe that has to be specified during SunOS install as posix compliant.
-
Building Net-SNMP with gcc and Solaris 10's Forte-built Perl
The 5.0.9 Net-SNMP that come with Solaris SPARC is too old for our users. Building the latest version appears to be basically impossible and I'm just about to bail and just build yet another version of Perl for Solaris 10 so it will work. But on the chance that someone has done this:
I am trying to build Net-SNMP 5.4.1.2 with the Sunfreeware gcc. The configure script seems to ignore the --disable-perl-cc-checks flag:
./configure with-perl-modules disable-perl-cc-checks
configure: error: This build is using a GNU C compiler (gcc) while Perl has been compiled with a non-GNU (or non-working) compiler (cc). This likely won't work for building with Perl support. Either specify a different compiler (--with-cc=PATH), disable this check (--disable-perl-cc-checks) or build without Perl (--without-perl-modules).
Has anyone successfully done this? I was hoping to get a successful configure run, then build the binaries, and then further tweak the perl makefiles with "GCC=/usr/perl5/5.8.4/bin/perlgcc" or something.configure: error: This build is using a GNU C compiler (gcc) while Perl has been compiled with a non-GNU (or non-working) compiler (cc). This likely won't work for building with Perl support. Either specify a different compiler (--with-cc=PATH), disable this check (--disable-perl-cc-checks) or build without Perl (--without-perl-modules).The perl supplied by Sun should be compiled with Sun Studio and the error mentioned above seems to reflect this.
So, either build perl first with sunfreeware's gcc and then move on to net-snmp or install and use Sun Studio instead of gcc so perl is happy.
alan -
Vast amount of warnings (-Wdeprecated-declarations) with gcc 5.1.0
When compiling some programs (eg. kicad, libopenshot) with gcc 5.1.0 the is a vast amount of warnings (-Wdeprecated-declarations). Thousands and thousands of warnings.
In file included from /usr/include/wx-3.0/wx/wx.h:14:0,
from /koko/kicad-bzr/src/kicad/include/common.h:37,
from /koko/kicad-bzr/src/kicad/include/base_units.h:37,
from /koko/kicad-bzr/src/kicad/pcbnew/router/pns_meander_placer.cpp:23:
/usr/include/wx-3.0/wx/event.h:3685:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/pcbnew/router/pns_meander_placer.cpp:277:1: warning: ‘virtual void wxWindowBase::SetVirtualSizeHints(int, int, int, int)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/wx.h:14:0,
from /koko/kicad-bzr/src/kicad/include/common.h:37,
from /koko/kicad-bzr/src/kicad/include/base_units.h:37,
from /koko/kicad-bzr/src/kicad/pcbnew/router/pns_meander_placer.cpp:23:
/usr/include/wx-3.0/wx/window.h:459:5: note: declared here
wxDEPRECATED( virtual void SetVirtualSizeHints( int minW, int minH,
^
/koko/kicad-bzr/src/kicad/pcbnew/router/pns_meander_placer.cpp:277:1: warning: ‘virtual void wxWindowBase::MakeModal(bool)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/wx.h:14:0,
from /koko/kicad-bzr/src/kicad/include/common.h:37,
from /koko/kicad-bzr/src/kicad/include/base_units.h:37,
from /koko/kicad-bzr/src/kicad/pcbnew/router/pns_meander_placer.cpp:23:
/usr/include/wx-3.0/wx/window.h:688:5: note: declared here
wxDEPRECATED( virtual void MakeModal(bool modal = true) );
^
/koko/kicad-bzr/src/kicad/pcbnew/router/pns_meander_placer.cpp:277:1: warning: ‘virtual void wxWindowBase::SetInitialBestSize(const wxSize&)’ is deprecated: use SetInitialSize() instead. [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/wx.h:38:0,
from /koko/kicad-bzr/src/kicad/include/common.h:37,
from /koko/kicad-bzr/src/kicad/include/base_units.h:37,
from /koko/kicad-bzr/src/kicad/pcbnew/router/pns_meander_placer.cpp:23:
/usr/include/wx-3.0/wx/window.h:1872:13: note: declared here
inline void wxWindowBase::SetInitialBestSize(const wxSize& size)
^
[ 54%] Building CXX object pcbnew/router/CMakeFiles/pnsrouter.dir/pns_meander_placer_base.cpp.o
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryValidator(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3682:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryParent(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3685:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetVirtualSizeHints(int, int, int, int)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:459:5: note: declared here
wxDEPRECATED( virtual void SetVirtualSizeHints( int minW, int minH,
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::MakeModal(bool)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:688:5: note: declared here
wxDEPRECATED( virtual void MakeModal(bool modal = true) );
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetInitialBestSize(const wxSize&)’ is deprecated: use SetInitialSize() instead. [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/xrc/xmlreshandler.h:23:0,
from /usr/include/wx-3.0/wx/xrc/xmlres.h:30,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:12,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:1872:13: note: declared here
inline void wxWindowBase::SetInitialBestSize(const wxSize& size)
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryValidator(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3682:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryParent(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3685:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetVirtualSizeHints(int, int, int, int)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:459:5: note: declared here
wxDEPRECATED( virtual void SetVirtualSizeHints( int minW, int minH,
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::MakeModal(bool)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:688:5: note: declared here
wxDEPRECATED( virtual void MakeModal(bool modal = true) );
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetInitialBestSize(const wxSize&)’ is deprecated: use SetInitialSize() instead. [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/xrc/xmlreshandler.h:23:0,
from /usr/include/wx-3.0/wx/xrc/xmlres.h:30,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:12,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:1872:13: note: declared here
inline void wxWindowBase::SetInitialBestSize(const wxSize& size)
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryValidator(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3682:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryParent(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3685:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetVirtualSizeHints(int, int, int, int)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:459:5: note: declared here
wxDEPRECATED( virtual void SetVirtualSizeHints( int minW, int minH,
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::MakeModal(bool)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:688:5: note: declared here
wxDEPRECATED( virtual void MakeModal(bool modal = true) );
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetInitialBestSize(const wxSize&)’ is deprecated: use SetInitialSize() instead. [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/xrc/xmlreshandler.h:23:0,
from /usr/include/wx-3.0/wx/xrc/xmlres.h:30,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:12,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:1872:13: note: declared here
inline void wxWindowBase::SetInitialBestSize(const wxSize& size)
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryValidator(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3682:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryParent(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3685:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetVirtualSizeHints(int, int, int, int)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:459:5: note: declared here
wxDEPRECATED( virtual void SetVirtualSizeHints( int minW, int minH,
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::MakeModal(bool)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:688:5: note: declared here
wxDEPRECATED( virtual void MakeModal(bool modal = true) );
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetInitialBestSize(const wxSize&)’ is deprecated: use SetInitialSize() instead. [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/xrc/xmlreshandler.h:23:0,
from /usr/include/wx-3.0/wx/xrc/xmlres.h:30,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:12,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:1872:13: note: declared here
inline void wxWindowBase::SetInitialBestSize(const wxSize& size)
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryValidator(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3682:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryParent(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3685:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetVirtualSizeHints(int, int, int, int)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:459:5: note: declared here
wxDEPRECATED( virtual void SetVirtualSizeHints( int minW, int minH,
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::MakeModal(bool)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:688:5: note: declared here
wxDEPRECATED( virtual void MakeModal(bool modal = true) );
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetInitialBestSize(const wxSize&)’ is deprecated: use SetInitialSize() instead. [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/xrc/xmlreshandler.h:23:0,
from /usr/include/wx-3.0/wx/xrc/xmlres.h:30,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:12,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:1872:13: note: declared here
inline void wxWindowBase::SetInitialBestSize(const wxSize& size)
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryValidator(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3682:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryParent(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3685:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetVirtualSizeHints(int, int, int, int)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:459:5: note: declared here
wxDEPRECATED( virtual void SetVirtualSizeHints( int minW, int minH,
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::MakeModal(bool)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:688:5: note: declared here
wxDEPRECATED( virtual void MakeModal(bool modal = true) );
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetInitialBestSize(const wxSize&)’ is deprecated: use SetInitialSize() instead. [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/xrc/xmlreshandler.h:23:0,
from /usr/include/wx-3.0/wx/xrc/xmlres.h:30,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:12,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:1872:13: note: declared here
inline void wxWindowBase::SetInitialBestSize(const wxSize& size)
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryValidator(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3682:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryParent(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3685:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetVirtualSizeHints(int, int, int, int)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:459:5: note: declared here
wxDEPRECATED( virtual void SetVirtualSizeHints( int minW, int minH,
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::MakeModal(bool)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:688:5: note: declared here
wxDEPRECATED( virtual void MakeModal(bool modal = true) );
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetInitialBestSize(const wxSize&)’ is deprecated: use SetInitialSize() instead. [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/xrc/xmlreshandler.h:23:0,
from /usr/include/wx-3.0/wx/xrc/xmlres.h:30,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:12,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:1872:13: note: declared here
inline void wxWindowBase::SetInitialBestSize(const wxSize& size)
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryValidator(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3682:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryParent(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3685:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetVirtualSizeHints(int, int, int, int)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:459:5: note: declared here
wxDEPRECATED( virtual void SetVirtualSizeHints( int minW, int minH,
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::MakeModal(bool)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:688:5: note: declared here
wxDEPRECATED( virtual void MakeModal(bool modal = true) );
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetInitialBestSize(const wxSize&)’ is deprecated: use SetInitialSize() instead. [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/xrc/xmlreshandler.h:23:0,
from /usr/include/wx-3.0/wx/xrc/xmlres.h:30,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:12,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:1872:13: note: declared here
inline void wxWindowBase::SetInitialBestSize(const wxSize& size)
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryValidator(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3682:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryParent(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3685:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetVirtualSizeHints(int, int, int, int)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:459:5: note: declared here
wxDEPRECATED( virtual void SetVirtualSizeHints( int minW, int minH,
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::MakeModal(bool)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:688:5: note: declared here
wxDEPRECATED( virtual void MakeModal(bool modal = true) );
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetInitialBestSize(const wxSize&)’ is deprecated: use SetInitialSize() instead. [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/xrc/xmlreshandler.h:23:0,
from /usr/include/wx-3.0/wx/xrc/xmlres.h:30,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:12,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:1872:13: note: declared here
inline void wxWindowBase::SetInitialBestSize(const wxSize& size)
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryValidator(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3682:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryParent(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3685:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetVirtualSizeHints(int, int, int, int)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:459:5: note: declared here
wxDEPRECATED( virtual void SetVirtualSizeHints( int minW, int minH,
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::MakeModal(bool)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:688:5: note: declared here
wxDEPRECATED( virtual void MakeModal(bool modal = true) );
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetInitialBestSize(const wxSize&)’ is deprecated: use SetInitialSize() instead. [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/xrc/xmlreshandler.h:23:0,
from /usr/include/wx-3.0/wx/xrc/xmlres.h:30,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:12,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:1872:13: note: declared here
inline void wxWindowBase::SetInitialBestSize(const wxSize& size)
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryValidator(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3682:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryParent(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3685:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetVirtualSizeHints(int, int, int, int)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:459:5: note: declared here
wxDEPRECATED( virtual void SetVirtualSizeHints( int minW, int minH,
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::MakeModal(bool)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:688:5: note: declared here
wxDEPRECATED( virtual void MakeModal(bool modal = true) );
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetInitialBestSize(const wxSize&)’ is deprecated: use SetInitialSize() instead. [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/xrc/xmlreshandler.h:23:0,
from /usr/include/wx-3.0/wx/xrc/xmlres.h:30,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:12,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:1872:13: note: declared here
inline void wxWindowBase::SetInitialBestSize(const wxSize& size)
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryValidator(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3682:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryParent(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3685:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetVirtualSizeHints(int, int, int, int)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:459:5: note: declared here
wxDEPRECATED( virtual void SetVirtualSizeHints( int minW, int minH,
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::MakeModal(bool)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:688:5: note: declared here
wxDEPRECATED( virtual void MakeModal(bool modal = true) );
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetInitialBestSize(const wxSize&)’ is deprecated: use SetInitialSize() instead. [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/xrc/xmlreshandler.h:23:0,
from /usr/include/wx-3.0/wx/xrc/xmlres.h:30,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:12,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:1872:13: note: declared here
inline void wxWindowBase::SetInitialBestSize(const wxSize& size)
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryValidator(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3682:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryParent(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3685:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetVirtualSizeHints(int, int, int, int)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:459:5: note: declared here
wxDEPRECATED( virtual void SetVirtualSizeHints( int minW, int minH,
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::MakeModal(bool)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:688:5: note: declared here
wxDEPRECATED( virtual void MakeModal(bool modal = true) );
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetInitialBestSize(const wxSize&)’ is deprecated: use SetInitialSize() instead. [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/xrc/xmlreshandler.h:23:0,
from /usr/include/wx-3.0/wx/xrc/xmlres.h:30,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:12,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:1872:13: note: declared here
inline void wxWindowBase::SetInitialBestSize(const wxSize& size)
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryValidator(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3682:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryParent(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3685:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetVirtualSizeHints(int, int, int, int)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:459:5: note: declared here
wxDEPRECATED( virtual void SetVirtualSizeHints( int minW, int minH,
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::MakeModal(bool)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:688:5: note: declared here
wxDEPRECATED( virtual void MakeModal(bool modal = true) );
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetInitialBestSize(const wxSize&)’ is deprecated: use SetInitialSize() instead. [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/xrc/xmlreshandler.h:23:0,
from /usr/include/wx-3.0/wx/xrc/xmlres.h:30,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:12,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:1872:13: note: declared here
inline void wxWindowBase::SetInitialBestSize(const wxSize& size)
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryValidator(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3682:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryParent(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3685:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetVirtualSizeHints(int, int, int, int)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:459:5: note: declared here
wxDEPRECATED( virtual void SetVirtualSizeHints( int minW, int minH,
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::MakeModal(bool)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:688:5: note: declared here
wxDEPRECATED( virtual void MakeModal(bool modal = true) );
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetInitialBestSize(const wxSize&)’ is deprecated: use SetInitialSize() instead. [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/xrc/xmlreshandler.h:23:0,
from /usr/include/wx-3.0/wx/xrc/xmlres.h:30,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:12,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:1872:13: note: declared here
inline void wxWindowBase::SetInitialBestSize(const wxSize& size)
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryValidator(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3682:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryParent(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3685:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetVirtualSizeHints(int, int, int, int)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:459:5: note: declared here
wxDEPRECATED( virtual void SetVirtualSizeHints( int minW, int minH,
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::MakeModal(bool)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:688:5: note: declared here
wxDEPRECATED( virtual void MakeModal(bool modal = true) );
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetInitialBestSize(const wxSize&)’ is deprecated: use SetInitialSize() instead. [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/xrc/xmlreshandler.h:23:0,
from /usr/include/wx-3.0/wx/xrc/xmlres.h:30,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:12,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:1872:13: note: declared here
inline void wxWindowBase::SetInitialBestSize(const wxSize& size)
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryValidator(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3682:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryParent(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3685:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetVirtualSizeHints(int, int, int, int)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:459:5: note: declared here
wxDEPRECATED( virtual void SetVirtualSizeHints( int minW, int minH,
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::MakeModal(bool)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:688:5: note: declared here
wxDEPRECATED( virtual void MakeModal(bool modal = true) );
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetInitialBestSize(const wxSize&)’ is deprecated: use SetInitialSize() instead. [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/xrc/xmlreshandler.h:23:0,
from /usr/include/wx-3.0/wx/xrc/xmlres.h:30,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:12,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:1872:13: note: declared here
inline void wxWindowBase::SetInitialBestSize(const wxSize& size)
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryValidator(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3682:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryParent(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3685:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetVirtualSizeHints(int, int, int, int)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:459:5: note: declared here
wxDEPRECATED( virtual void SetVirtualSizeHints( int minW, int minH,
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::MakeModal(bool)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:688:5: note: declared here
wxDEPRECATED( virtual void MakeModal(bool modal = true) );
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetInitialBestSize(const wxSize&)’ is deprecated: use SetInitialSize() instead. [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/xrc/xmlreshandler.h:23:0,
from /usr/include/wx-3.0/wx/xrc/xmlres.h:30,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:12,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:1872:13: note: declared here
inline void wxWindowBase::SetInitialBestSize(const wxSize& size)
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryValidator(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3682:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual bool wxEvtHandler::TryParent(wxEvent&)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/event.h:3685:5: note: declared here
wxDEPRECATED_BUT_USED_INTERNALLY_INLINE(
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetVirtualSizeHints(int, int, int, int)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:459:5: note: declared here
wxDEPRECATED( virtual void SetVirtualSizeHints( int minW, int minH,
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::MakeModal(bool)’ is deprecated [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/string.h:24:0,
from /usr/include/wx-3.0/wx/artprov.h:14,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:11,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:8:
/usr/include/wx-3.0/wx/window.h:688:5: note: declared here
wxDEPRECATED( virtual void MakeModal(bool modal = true) );
^
/koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.cpp:102:1: warning: ‘virtual void wxWindowBase::SetInitialBestSize(const wxSize&)’ is deprecated: use SetInitialSize() instead. [-Wdeprecated-declarations]
^
In file included from /usr/include/wx-3.0/wx/xrc/xmlreshandler.h:23:0,
from /usr/include/wx-3.0/wx/xrc/xmlres.h:30,
from /koko/kicad-bzr/src/kicad/eeschema/dialogs/dialog_sch_edit_sheet_pin_base.h:12,One of the wxWidgets developers has already opened a bug report for GCC: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65974
-
Hello,
I have a problem using profiling on solaris 8 using gcc. When I compile a small test program with gcc -g -pg, it compiles and runs correctly. However, when I build my main application using the same flags at the compilationa and likning steps, the build completes successfully but
the application gives a segemntation fault. Is it a bug? Does gcc have a problem profiling in presence of threads or shared libs?
Thanks in advance,
Rajsekhar Bhattacharjee (Raj)
The relevant details are as follows:
OS (using uname -a): SunOS 5.8 Generic_108528-15 sun4u sparc SUNW,Sun-Blade-100
gcc version (using gcc -v): gcc version 2.95.3 20010315 (release)
debugger output :
GNU gdb 5.0
Copyright 2000 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "sparc-sun-solaris2.8"...
Core was generated by `/home/raja/zentime/bin/solaris/gprof/zentime /mnt/elmer/export/home1/TestSyst
em'.
Program terminated with signal 11, Segmentation Fault.
Reading symbols from /usr/lib/libdl.so.1...done.
Loaded symbols for /usr/lib/libdl.so.1
Reading symbols from /usr/lib/libpthread.so.1...done.
Loaded symbols for /usr/lib/libpthread.so.1
Reading symbols from /usr/lib/libcurses.so.1...done.
Loaded symbols for /usr/lib/libcurses.so.1
Reading symbols from /usr/lib/libsocket.so.1...done.
Loaded symbols for /usr/lib/libsocket.so.1
Reading symbols from /usr/lib/libnsl.so.1...done.
Loaded symbols for /usr/lib/libnsl.so.1
Reading symbols from /usr/openwin/lib/libX11.so.4...done.
Loaded symbols for /usr/openwin/lib/libX11.so.4
Reading symbols from /usr/lib/libc.so.1...done.
Loaded symbols for /usr/lib/libc.so.1
Reading symbols from /usr/lib/libmp.so.2...done.
Loaded symbols for /usr/lib/libmp.so.2
Reading symbols from /usr/openwin/lib/libXext.so.0...done.
Loaded symbols for /usr/openwin/lib/libXext.so.0
Reading symbols from /usr/lib/libthread.so.1...done.
Loaded symbols for /usr/lib/libthread.so.1
Reading symbols from /usr/platform/SUNW,Ultra-1/lib/libc_psr.so.1...done.
Loaded symbols for /usr/platform/SUNW,Ultra-1/lib/libc_psr.so.1
#0 0xfd7dbe8c in __csigsetjmp () from /usr/lib/libthread.so.1
(gdb)Hi,
we have the same Problem with the inline assembler. We are using Sunstudio 12 on x86 and tried to get this code compiled (Sunstudio 12 should be gas compatible).
any ideas ?
thanks
Dieter
#define HEC_HTONF(x) \
(__extension__ \
register HVB::float32_t __v, __x = (x); \
__asm__ ( \
"bswap %0" \
: "=r" (__v) \
: "0" (__x) \
__v; \
#define HEC_HTONLF_INPLACE(x) \
__asm__ ( \
"leal %0, %%ecx \n\t" \
"movl (%%ecx), %%eax \n\t" \
"movl 4(%%ecx), %%edx \n\t" \
"bswap %%eax \n\t" \
"bswap %%edx \n\t" \
"movl %%eax, 4(%%ecx) \n\t" \
"movl %%edx, (%%ecx) \n\t" \
: "=m" (x) \
: "m" (x) \
: "%eax", "%ecx", "%edx" \
); -
OCCI compilation issue with gcc-3.2.3 on Red Hat ES 2.1
Hello,
If I use OCCI of Oracle 10g and try to compile it with gcc-3.2.3 on Red Hat ES 2.1, I get linking errors.
The same works if I try to compile OCCI on Red Hat ES 3.0.
Any clues about how to compile the OCCI on RedHat ES/AS 2.1?Yes, I downloaded the OCCI for gcc-3.2.3.
As I said it works on Red Hat 3.0.
I want to compile it on Red Hat ES 2.1.
I have installed gcc-3.2.3 on Red Hat ES 2.1. But the occi compilation wont succeed onto it. -
Bad performance of PARI when compiling with GCC for SPARC 4.2.0
Hi,
I've compiled pari (2.3.3) with gcc 4.2.0 and with an old gcc 3.3.2 on a Sun Fire V240 and Solaris 10.
The performance of pari compiled with gcc 4.2.0 is terrible. I've tried it with '-O3 -fast' and without this flags with the same result.
First compiled with gcc 3.3.2 without any special CFLAGS and run make bench:
* Testing objets for gp-sta..TIME=4 for gp-dyn..TIME=4
* Testing analyz for gp-sta..TIME=82 for gp-dyn..TIME=80
* Testing number for gp-sta..TIME=63 for gp-dyn..TIME=62
* Testing polyser for gp-sta..TIME=19 for gp-dyn..TIME=19
* Testing linear for gp-sta..TIME=30 for gp-dyn..TIME=29
* Testing elliptic for gp-sta..TIME=50 for gp-dyn..TIME=51
* Testing sumiter for gp-sta..TIME=45 for gp-dyn..TIME=47
* Testing graph for gp-sta..TIME=25 for gp-dyn..TIME=25
* Testing program for gp-sta..TIME=94 for gp-dyn..TIME=94
* Testing trans for gp-sta..TIME=228 for gp-dyn..TIME=225
* Testing nfields for gp-sta..TIME=434 for gp-dyn..TIME=433
+++ Total bench for gp-sta is 726
+++ Total bench for gp-dyn is 722
Then compiled with gcc 4.2.0 again without any special flags and run make bench:
* Testing objets for gp-sta..TIME=4 for gp-dyn..TIME=4
* Testing analyz for gp-sta..TIME=82 for gp-dyn..TIME=83
* Testing number for gp-sta..TIME=62 for gp-dyn..TIME=65
* Testing polyser for gp-sta..TIME=19 for gp-dyn..TIME=19
* Testing linear for gp-sta..BUG [1686975] for gp-dyn..BUG [1608146]
* Testing elliptic for gp-sta..TIME=50 for gp-dyn..TIME=52
* Testing sumiter for gp-sta..TIME=51 for gp-dyn..TIME=50
* Testing graph for gp-sta..TIME=28 for gp-dyn..TIME=28
* Testing program for gp-sta..TIME=98 for gp-dyn..TIME=97
* Testing trans for gp-sta..BUG [613000] for gp-dyn..BUG [606558]
* Testing nfields for gp-sta..BUG [3648091] for gp-dyn..BUG [3716170]
+++ [BUG] Total bench for gp-sta is 3029987
+++ [BUG] Total bench for gp-dyn is 2958336
Do anybody know this problem or can tell me what the problem could be?
Thanks!!
Rainer W.Here are the compiler options I used to compile it with gcc4.
C compiler is /usr/local/gcc4/gcc/bin/gcc -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer
Executable linker is /usr/local/gcc4/gcc/bin/gcc -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer
Dynamic Lib linker is /usr/local/gcc4/gcc/bin/gcc -shared -mimpure-text $(CFLAGS) $(DLCFLAGS) -Wl,-G,-h,$(LIBPARI_SONAME)
If I use the -fast option I get the same result may be a little bit worse.
Here are some compilation lines:
Making gp in Osolaris-sparcv9
make[2]: Entering directory `/no_backup/pari/pari-2.3.3/Osolaris-sparcv9'
File ../src/funclist not changed.
../config/genkernel ../src/kernel/sparcv8_micro/asm0-common.h ../src/kernel/sparcv8_micro/asm0.h > parilvl0.h
cat ../src/kernel/none/tune.h ../src/kernel/none/int.h ../src/kernel/none/level1.h > parilvl1.h
cat parilvl0.h parilvl1.h > pariinl.h
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -I../src/language -I/usr/local/include -o gp.o ../src/gp/gp.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -I../src/graph -o gp_init.o ../src/gp/gp_init.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -I../src/language -I/usr/local/include -o gp_rl.o ../src/gp/gp_rl.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -DDL_DFLT_NAME=NULL -o highlvl.o ../src/gp/highlvl.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o whatnow.o ../src/gp/whatnow.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -I/usr/openwin/include -o plotX.o ../src/graph/plotX.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o anal.o ../src/language/anal.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o compat.o ../src/language/compat.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o default.o ../src/language/default.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o errmsg.o ../src/language/errmsg.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o es.o ../src/language/es.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o init.o ../src/language/init.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o intnum.o ../src/language/intnum.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o members.o ../src/language/members.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o sumiter.o ../src/language/sumiter.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o aprcl.o ../src/modules/aprcl.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o elldata.o ../src/modules/elldata.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o elliptic.o ../src/modules/elliptic.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o galois.o ../src/modules/galois.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o groupid.o ../src/modules/groupid.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o kummer.o ../src/modules/kummer.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o mpqs.o ../src/modules/mpqs.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o nffactor.o ../src/modules/nffactor.c
/usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o part.o ../src/modules/part.c -
Kdegraphics-3.2.2 needs a patch to compile with gcc-3.4
Hi,
I've tried to compile kdegraphics-3.2.2 with gcc-3.4 without succes, even after changing things in the PKGBUILD file. Just before I gave up I found this patch :-)
Patch can be found here:
http://bugs.gentoo.org/show_bug.cgi?id=48596
I've downloaded the attachment and renamed it to 'v3.2.2-with-gcc-3.4.patch'.
Just add the following line in PKGBUILD after 'cd $startdir/src/$pkgname-$pkgver'
patch -p3 < ${startdir}/v3.2.2-with-gcc-3.4.patchmake it an bug report
Maybe you are looking for
-
Exporting to Powerpoint 2007 using the 2007 formats
I'm currently running Xcelsius 2208 and Office 2007. Because I was the first to get Office 2007 I've had to continue saving in the Office 97-2003 format (.ppt). Now that everyone has caugth up if I save in the .pptx or .pptm format the .swf appears
-
I have a workstation that runs Windows 98. The network is a novell network and Oracle is running on Novell platform. I know that I can install Oracel Developer on muy workstation, but will it work? Thanks
-
Use of Document Area/Document Space in KPro
Hi, I hope this is the correct forum for my question. If not, suggestions are welcome. We are using KPro to store documents for quality notifications. While configuring content repositories (Tx OAC0) and content categories (Tx OACT) I found the field
-
I restore the iphone 2 days ago, and the itune try to download the 1.02 iphone firmware for restore, but it kept download ... showing like 110mb/97mb. ( suppose it will stop at 97mb, 100%). So i turn to use another computer which had the firmware dow
-
Ps from CS4 closes on its own??
My CS4 student edition software is about a week old and has been working fine.. up until today. When I open Photoshop it will load a blank page or I can open Photoshop by opening a picture. However, within 10 seconds it closes automatically on its o