Safe to switch off iMac regularly, safe to switch off iMac regularly

hi guys - im a little embarassed even asking this question but im new to mac and the manual says to only shut down the imac if you are not going to use it for a few days otherwise put into sleep
thing is i only use my imac about an hour every night but i prefer turning it off as im at work the next day - dont like leaving anything on. will it cause more and wear if i dont use the sleep ?
thanks

You will get strong opinions for both; IMHO, if you're only using it for about an hour, there is nothing wrong with shutting it down - I do that if I'm not going to use it for a longer period because I'd rather not be connected to the internet automatically 24/7 and prefer not to waste natural resources. I'm aware that the manual suggests letting it sleep; a senior Apple advisor told me that he shuts his down regularly. I've tried both methods and prefer shutting it down at least 2 - 3 times per week because there are certain checks it goes through during bootup which will be missed by just letting it sleep and I've never had a problem with a hard drive because of it (or for any other reason for that matter). As for the maintenance scripts which run in the middle of the night - they are no longer as important as they used to be and if you'll let it sleep once or so per week, they will run automatically when it wakes up.

Similar Messages

Early Imac 20" freezes on regular mode but works fine in safe mode, any ideas?

Have a early 2006 Imac 20" that won't run in normal mode; freezes within minutes. Run fine in safe mode, but safe mode won't play sound or allow exterior inputs. In high fan state, don't know the name of the mode, but you hold the power button while plugging in power cord, the machine also runs relatively fine. The machines been glitzy for years, developed the lines/colour patterns that's been mentioned in other forms/threads, but it still ran programs. Took it to apple and they said the board is the issue and my machine is obsolete. Fine, I just want to understand why it will run perfectly in safe mode; no lines, no freezing, all programs running...but won't last minutes in regular mode. Also, if anyone has a way to play music...in bluetooth or appletv in safe mode, let me know.
Thanks.

Most of thee skinny on that...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Is it safe to just switch off tv at wall socket?

My wife has a habit of switching everything off at the wall socket. So if I get an tv, it will be switched off randomly at the wall.
Is this safe to do? is there a standby button on the tv? how do you switch it off? I dont want here just switching it off at wall socket when its in the middle of reading/writing to HDD as surely this will damage it?
cheers

how can stopping a hard drive without 1st preparing it to be stopped ever be healthy for a device? how can increasing the possibility of interrupting data transfers in the middle of a transfer and increasing the possibility of corrupting data ever be a good thing?
the OP said that the power could be yanked at any old time.. i can't understand how you can say that would be a good thing for an appleTV.
i also run mine 24/7 and my device is solid as a rock.. i restart mine only by doing the press and hold menu + down button and since i stopped unplugging and re-plugging to restart it's stability has gone up markedly..
i would say to the OP.. if the power is going to be pulled in any case.. what you might want to do is press menu on the iPod Touch or appleTV remote for about 10 seconds after you're done with it to make sure it's at the main menu and lessen the chance it's doing anything of significants at the moment the power goes out. you are still likely reducing the life of the hard drive by constantly turning it off and on.. hard drives are designed to run constantly all the time.. spinning them up and down only reduces their lifespan.

Is it safe to pull out mains plug on aTV to switch off totally?

I've read a bit about switching off aTV and standby (not really a standby). But is it safe to just unplug the aTV at any time when not using it?
I know PCs and Macs spin down the HDD etc so when powering down it's safe, but what about the aTV? I sometimes don't use for a week so prefer for it not to be on for heat issues/wear etc? But I am worried about switching it off when HDD is "not ready" or unit etc
Cheers

Chenks wrote:
i wouldn't unplug it whilst it was syncing or while the HDD was doing anything. just like any device with an HDD, you can damage it by killing the power during HDD activity. other than that, it's not unsafe to
Sorry should have said no when syncing or streaming, basically when it's sitting doing nothing.
bear in mind that you are likely to cause just as much (if not more) wear by constantly powering it on and off all the time.
Well this is the big question. It runs real hot, I understand it must have been designed and tested for this, but to run it with it not being used for a week like this should I not just unplug it?
I don't think I would unplug/plug a few times a day just if I know I won't use it for a while, eg use it on a night time, switch off say 11pm, unplug as won't use it again till 6pm the next day?

IMac frozen in mail can't force quit turned off at power and done safe reboot still frozen?

iMac frozen in mail can't force quit turned off at power and tried safe reboot, but still frozen?

To do the NVRAM reset (be quick with Step 4, "immediately" is literal!):
1. Power down the machine.
2. Locate the following keys on your keyboard in preparation for Step 4:
‘command’ – ‘option’ – ‘P’ – ‘R’
3. Press the ‘power on’ button.
4. Immediately – and before the grey screen appears – hold down ‘command-option-P-R’ all together.
5. Keep them held down until you’ve heard the start-up chime twice. After you release them you should hear it again, and hopefully your Mac will boot up as it should.

IMac 2012-13 won't start regularly. Only starts in Safe Mode

Need help troubleshooting, or should I just take into the Genius Bar?
Just happened for the first time today. I've heard that third-party apps may cause these issues. I run Intego Protection Software with a LaCie ExHDD for backups.
Need help ASAP!
Thank you!

Back up all data to at least two different storage devices, if you haven't already done so. One backup is not enough to be safe. The backups can be made with Time Machine or with Disk Utility. Preferably both.
Erase and install OS X. This operation will destroy all data on the startup volume, so you had be better be sure of the backups. If you upgraded from an older version of OS X, you'll need the Apple ID and password that you used, so make a note of those before you begin.
When you restart, you'll be prompted to go through the initial setup process in Setup Assistant. That’s when you transfer the data from a backup.
Select only users and Computer & Network Settings in the Setup Assistant dialog—not Applications or Other files and folders. Don't transfer the Guest account, if it was enabled.
After that, run Software Update.
If the problem is resolved after the clean installation, reinstall third-party software selectively. I can only suggest general guidelines. Self-contained applications that install into the Applications folder by drag-and-drop or download from the App Store are usually safe. Anything that comes packaged as an installer or that prompts for an administrator password is suspect, and you must test thoroughly after reinstalling each such item to make sure you haven't restored the problem.
I strongly recommend that you never reinstall commercial "anti-virus" products or "utilities," nor any software that changes the user interface or modifies the functions of built-in applications. If you do that, the problem is likely to recur.
Before installing any software, ask yourself the question: "Am I sure I know how to uninstall this without having to wipe the volume again?" If the answer is "no," stop.
Never install any third-party software unless you know how to uninstall it.

Why will my iMac boot fine in Safe Mode but freezes on a normal boot?

It is a 17" iMac. 1.83Ghz Core 2 Duo. 1GB RAM. 160GB Hard Drive. Combo Drive with Intel GMA 950 GPU.
I took out the screen and put in in a different computer a while back. This was a working computer before hand. I pulled it off the shelf the other day to get it going (using an External Monitor) and when it gets past the Apple Screen, it goes to the blue screen, and then loads the wallpaper and some of the taskbar, but no dock and it freezes. (This is on a fresh install of Leopard). When I boot to safe mode, it boots fine. I have tried reseating RAM, different RAM sticks, and a different hard drive. Also replaced PRAM battery. Done a SMC reset and a PRAM reset. No change.
Also worth noting was that when I tried to boot my Leopard disc, it would freeze at the Choose Language screen. So I took the HD out and installed Leopard thru my other iMac and reinstalled OS X. Did the same thing when I tried to boot from a Snow Leopard disc.
Ideas??

Hello, in Safe Mode did you try setting a good resolution on the Display?
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons
See this great post by themachead on how to list the extensions in Safe Mode with System Profiler then compare to the extension folder!
http://discussions.apple.com/thread.jspa?messageID=10161377&#10161377

24" iMac will only boot in safe mode

Here is the short version:
I have a 24" iMac Core 2 2.16 GHZ with Lion installed (has been for a long time). It will only boot successfully in safe mode. The AHT Extended tests do not report any problems. I have reset PRAM and SMC. Nothing helps. Normal boot process will get to the point where it switches from the Apple logo with spinning wheel to where it would normally switch the OSX GUI and login screen. Instead the screen is all white or gray. The exact same problem happens if I try to boot from an OSX Install DVD or USB and also my DiskWarrior DVD. Since safe mode works, my guess is that the problem is with the video card and the normal color depth that the Mac boots to. In Safe Mode it is in reduced colors.
Since safe mode works, I have all of my data backed up to an external drive. If I could boot from an install disk, I would have already wiped the disk and done a new install, but I cannot do this! I am assuming this is a hardware problem and given the age of this iMac I am out of luck. I ordered a new system last night, but if it is possible to get this one working again, I would like to be able to give it to a relative who could use it. So if anyone has any ideas, it would be appreciated.
Just slightly longer version:
Been using this system since 2007. Used to use it for work, now it is the home media hub where we sync our iOS devices. It has had Lion installed for probably a year now and has always worked great. A few weeks ago, it started locking up whenever my son was playing Minecraft. I would have to power off the system to get it back. I assumed it was a Java problem. I tried fixing disk permissions etc. but nothing solved it. Anyway, last week I was downloading App updates in iTunes when the system locked up again. The mouse would move around but I could not Force Quit anything or really do anything. So I had to power off the system. That is when the boot problems started. Since that happened, the system has not come back with a normal boot.
Thanks for any ideas/help. If someone thinks this is fixable, I can bring it to my local Apple service dealer. I do not want to pay them $100 just to have them tell me it cannot be fixed or needs a new logic board or something like that which would not be worth buying.
Mark

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
The commands may line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it. Copy the selected text to the Clipboard (command-C). Then click anywhere in the Terminal window and paste (command-V).
find /Sy*/L*/Ex* -type f -name Info.plist -exec sh -c '/usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$1" 2> /dev/null | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo ${1%*.kext/*}.kext' {} {} \;
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 3
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, these steps are all copy-and-paste — no typing. Also remember to post the output.
You can then quit Terminal.

Unable to recover Mavericks via Time Machine on iMac (2011). I have one Time Machine backup from this week On new Time Capsule. I already attempted safe boot and NPRAM reset. Hard drive and permissions verified as ok.

Some more history - I'm not too techie so added everything in I thought might be significant!
- Installed Mavericks on iMac in October 2013
- experienced regular low memory issues - used Memory Clean app as a workaround
- last week decided to upgrade installed memory from 4gb to 16gb. Faster loading but still running out of memory - just takes longer to do so.
- also last week purchased 2gb Time Capsule (to back up 660gb on 1TB drive)
- one successful Time Machine backup completed last weekend.
- I decided to try and clear some space, tidy my folders, old music files, delete duplicates etc (Not system files)
- then tried out 'time machine restore' just to test it out. Deleted files and folders recovered ok using Time Machine menu (the one that looks like outta space)
- yesterday, Avast Anti-Virus flagged virus detected (sorry, I didn't manage to capture details) and quarantined file, but I couldn't get any windows to respond so forced Mac to shutdown.
- attempted regular reboot , system hanging on white/ apple symbol screen.
- attempted Safe reboot - reboot stalls at mess 'BootCacheControl: unable to open /var/db/BootCache.playlist no such file or directory.
(I don't know if this is significant)
- attempt NPRAM reset, reboot hanging at Apple symbol still
- attempted reboot into Disk Utility. HD drive verified ok. Permissions checked and Safari permissions fixed (only)
- finally attempting restore from Time Machine Backup via Disk Utility. Stalls at 'select a backup source'. Menu is 'searching for Time Machine Backup....'
Nothing is listed, after a few mins machine just goes to sleep.
My Time Capsule and networks are all switched on. No idea what to try next!

Most of the problems like this that people report on this forum are due to bad "utilities" like Memory Clean and Avast.
Your Mac probably didn't have a virus. There has never been an OSX virus "in the wild". Third party antivirus software is of very dubious utility on Macs. Macs are not PCs. OSX has anti-malware protection built into it already.
Do you have any other third party "utilities" on your Mac, such as CleanMyMac or MacKeeper?
Is the RAM you installed the recommended type of RAM for your Mac?
Take a look at this page: Mac OS X: Gray screen appears during startup
But your OS may be damaged beyond repair, or beyond what disk utility is able to repair.
In that case you have a few options:
There is a small chance that a (reputable) third part utility like Techtool Pro 7 may be able to fix your OS.
Try to boot into single user mode (restart, hold down ⌘S until you see a black screen with white text) and repair your hard drive. Here's a reference with directions: Repair Your Hard Disk in Single User Mode | Everything Macintosh
bite the bullet, boot into the recovery partition or internet recovery, and erase your HD, reinstall Mavericks from scratch, and start over. Your documents are probably still on your Time Machine Backup. I wouldn't reinstall the documents via a migration- you don't want to reinstall bad system files along with your documents- but you could copy them one by one back to your internal HD. And most importantly- don't reinstall any third party "utilites" like Memory Clean or Avast (or any other third-party antivirus software, for that matter).

How can I transfer files from a 27" iMac which will only boot in safe mode?

My late 2009 27" imac is having issues and will only boot in safe mode. I have tried to transfer files to a new Imac using migration assistant but it wont let me. If I try booting the old Imac normally I just get a grey screen, I believe it is the video card failed and am waiting for a fix, but I would like to transfer files before the fix in case something goes wrong and I lose everything.
Any help would be great

Hello Myles, likely it is a Hardware problem.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

I have an iMac that won't boot up. I've read all posts on this subject to no avail. When power is switched on, it chimes, Apple logo appears, spinning wheel, then loading bar starts to fill. It gets to about 25% then switches off! Help please!

iMac that won't boot up! When power is switched on it chimes, Apple logo appears, then loading bar, then spinning wheel. Bar seems to load up and gets to around 25%, then reverts to the start again, gets to about 20% on the bar and then switches itself off leaving a black screen. Tried all the remedies on internet with no avail so would welcome some advice other than binning what is a relatively new computer. Earliest appointment Apple could offer was Thursday 17th, really useful for a business user _ not impressed,

You've probably tried this, but will it Safe Boot? Restart holding down the Shift key until you see the grey progress bar. You'll need to input your admin password during bootup. If it will boot you can then try to eject the disk using the various suggestions here that you haven't tried already:
http://osxdaily.com/2009/08/28/eject-a-stuck-disk-from-your-mac-dvd-super-drive/
Or this (not tried this myself, but if things are desperate): http://www.youtube.com/watch?v=n7NYW9Dr448

IMac won't boot, won't start in safe mode

I'm at my wits end. My 17" iMac G4 won't boot. I just get the Apple logo, with the spinning progress wheel. I get the same thing when I try to boot in safe mode -- it just sits there with the progress wheel spinning. (I waited an hour, just to make sure.)
Here's what I've tried:
First, I read various articles on the Apple Web site which, among other things, talk about bad fonts, etc. All of the tips rely on safe mode, so I didn't get too far.
I was able to see the iMac HD from my PowerBook by launching it as a target drive, via "t", using a firewire cable. I used Disk Utility to do a repair on the iMac HD. It did find problems (I don't remember what they were), but when I ran it again it said there were no problems with the HD. I can move files from it to my machine, and browsing it looks normal. I looked for non-standard StartupItems, as recommended, but didn't see anything that isn't on the PowerBook.
I also tried putting my install disk in the iMac as it booted. The DVD went in, but had no effect on startup. (Same symptoms.)
Is there any way I can re-install from my PowerBook -- i.e., can I somehow run setup from the PowerBook on the firewire-connected iMac?
I'm not sure of the exact version of the OS it's got, since I can't boot it to see. (Should I look somewhere on the HD for that information?)
Any ideas or suggestions?
Thanks!
iMac Mac OS X (10.4.8)

I am just going to jump on the band wagon (first post). Before I try all the good advise given for "no start"... Does this info point me in a different direction? thanks
IMac (2003) OS 10.4.X troubleshooting. Bill Howarth 14Feb07
· iMac has been running slow. Has not been shutdown/restarted in months.
· Shutdown Computer, Power off, Power on. Get Apple logo and rotating timer. Hangs.
· Power off, power on with mouse down to insert TechTool Pro 4 CD.
· Turn journaling off, perform Directory Maintenance. Locks up at 1971269 of 1971270.
· Start from TechTool CD. Run test on File/Finder info. Locks up at mh1661.html ~ 70% of files tested.
· Start from TechTool CD. Run test on File/Finder info with “repair on” checked. Task completed.
· Run Directory Maintenance. Locks up at 1971269 of 1971270.
· Cannot do e-drive restart in TechTool (greyed out).
· Optimize volume. Task completed.
· Run Directory Maintenance. Locks up at 1971264 of 1971264.
· Try regular startup. Power off, power on (no CD). Get Apple logo and rotating timer. Hangs.
· Shift startup. Get Apple logo and rotating timer. Hangs.
· Startup from Apple Test CD (v2). Passes extended hardware test.
· Startup. Get Apple logo and rotating timer. Hangs.
Arrrrggghhhhh.
iMac Mac OS X (10.4.8)

After power cut, iMac will only start in safe mode.

When starting up the grey progress bar gets about one third of the way across and eventually switches to a blank grey screen The cursor is visible. It never progresses to the normal desk top.
It does start up in safe mode and shows the normal Yosemite desktop.
iMac is mid 2007 running Yosemite. 2.4 Ghz Intel Core 2 Duo, 4GB 667 MHz DDR@ SDRAM, ATI Radeon HD 2600 Pro 256 MB graphics.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Fonts 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\//&&/\/(Lib|usr).+\/(.+\.framework|Contents|Info\.plist|Resources|Versions)$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/(Content|Resource|Version)s(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/[AD]/d;p;' 's/Pr.+n //p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2 x\1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' 1,/$P/d;/e: Pe/{ n;s/^.+://;b0'$'\n'' };/^ +Man.+: ./{ s/ \(0x.+$//;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n//;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );S1() { printf kMDItemContentTypeTree=com.apple.$1'|sort';};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1'" {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} "`S2 ${p[35]}`" );N1=${#c2[@]};for j in {0..10};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Stylesheet );N3=${#l[@]};for i in {0..3};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 5 69 1;D13 5 54 30 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 24 22 29;B7 12;B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;C3 29;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+10)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 58 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 58;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

IMac randomly booting into "safe boot" mode after a clean installation of OS X Lion 10.7 (??)

Is anyone else having problems with their Mac (running a clean installation of OS X Lion 10.7) randomly booting into "safe boot" mode after a restart or shut down?
(Indicators being: seeing the login screen even when "automatic login" is enabled, the proper video drivers not loading - indicated by laggy desktop animations, WiFi not working properly, Menu Bar icons that normally show - not showing, etc.)
**Note: I migrated from a Snow Leopard Time Machine backup, but did not import "Settings". I thought this would be the best way to keep from encountering any issues with 10.6/10.7 incompatibility.

Found this answer from another user. THE EXACT THING HAPPENS TO ME:
Its really annoying Apple hasn't fix it.
=================
I think i got it :
The progressbar while booting ( booting in safe-mode ) came from the wireless keybord and is reproduceable.
At evening I shut down my iMac an put off my mouse and keyboard. To startup I put on the iMac and immediatly after I switch on keyboard and mouse. In tihs case the keyboards sends some event wich leads to safe-mode.
Know I wait until I switch on the keyboard. In my opinion this is a bug, i can live this way but i hope it will be fixed.
I will know take a look at it while not switching off the keybord, power consumption should be acceptable

IMac G5 boots into a hardly usable 'safe' mode.

Hello,
A lot has happened so I'll try to be brief. Initially ipod updater locked up the iMac (and trashed my ipod folders) until the only option was to use the power off. On trying to restart it would get to the grey screen (Apple icon and spinning gear) and go no further. I booted into safe mode which didn't really help, I then used the install disk and verified permissions and repaired the Mac HD several times (one error was reported initially but now all reported as ok).
However, now when I do a normal start, i.e. touching nothing on the keyboard during start up, it starts up and seems to log me in to a regular screen, but the icons like connection strength, language, bluetooth etc do not appear. In the top left the Apple icon appears as does 'Finder', but they don't work, if I click on them they turn blue but no drop down menus. I can open Finder from the dock and iTunes and they work ok, but everything else like Safari, iDVD, iPhoto all crash before they even start and I get the option to submit a report to Apple.
So I guess my questions are,
1) What has caused this, what is the problem?
2) Is this booting me into a 'safe mode' option? If so how can I just boot into the iMac normally?
3) Is running fsck worthwhile even though I've run disk utility which reports everything is ok?
4) Any other options apart from a reinstall?
Many thanks for any help and suggestions.
Regards,
Ian Goose

Hello Ian, welcome to Discussions. You might want to take a look at this, which will give you some insight into methods of dealing with your problem.
Good luck,
Miriam
Rev A 20" iMac G5, 15"iMac G4, 15"iMac G3 DVD Mac OS X (10.4.6)

Safe to switch off iMac regularly, safe to switch off iMac regularly

Similar Messages

Maybe you are looking for