Safe to windows format my iPod?

First a bit of bg info:
I dont usually have windows xp, in fact I pretty much dont outside of school, and I dont even have computers class in school anymore so hey.
My iPods firmware died, and after ages of googling, I found rockbox, an alternative, open source firmware. This all worked grand, until I tried to update that and I can;t get the newer version working
Now I can use my dads laptop for a few days while he's away on business, so Im wondering, if I use windows to format the iPod, then when I can get the lappy use the iTunes 7.4 restore tool will it a) bring the iPod back to the original functioning firmware and b) fix the bootloader so that it loads the iPod firmware by default?

I, too, am in need of assistance. I've been using my iPod mini on my computer system for nearly a year with no issues. Now, suddenly neither iTunes nor iPod Updater will recognize my iPod (even though my computer system seems to recognize it just fine). I have read all of the FAQs on this topic, and have tried everything to no avail. I've Reset the iPod, unistalled and reinstalled iTunes and the current Updater, tried putting the iPod in disk mode, etc. Everything that is listed in the various support articles, I have tried - except the Restore option. Unfortunately, since I can't get iPod Updater to recognize the device, I have no way (that I am aware of) to Restore the iPod - and I think that is my last hope in this case before I need to send it in for repairs.
Any suggestions on how to Restore an iPod when neither Updater nor iTunes recognizes the device (but Windows does)? I'd really like to update my iPod with all the music I've purchased since the last update.
Thanks, Stacy

Similar Messages

How do i transfer windows formatted 2005 iPod to my macbook air?

How do i transfer my old Windows formatted iPod (2005 model: 60GB video iPod model no. A1136) to my new MacBook Air (OS X 10.10)? I don't have a PC anymore to transfer to first. My Mac doesn't even recognize that there is a device when I plug it into the USB. I tried iCopyBot App, but it also seems to be looking for a Apple formatted iPod.

You can use a third party application: http://imazing.com
iMazing will recognize the iPod and you can copy / transfer the audio / movies to the Mac.

Mac & windows formatting on ipod

OK, here's the deal... I have a laptop that runs windows that I've been using and I've loaded a bunch of CDs on, as well as a bunch of itunes purchased music. I just got an imac (which is very cool - just trying to get used to using a mac!), loaded itunes and was thinking, "great, I'll plug in my ipod, authorize the new computer... and I'll have all my music on the new mac."
Yeah, well - not the case. Only the purchased music transferred from my ipod. After some searching, I think its because my ipod is formatted for windows, and that doesn't work on a mac.
Here's my question, is there any way to sync everything? So I can have my entire library on both computers?
Thanks for any help or suggestions.

"Only the purchased music transferred from my ipod."
Correct, that's how it's supposed to work. You can only transfer purchased music that way.
The iPod was never designed to be used cross platform. The major drawback is because although a Mac can read a Windows formatted iPod, Windows cannot read a Mac iPod.
The normal way of getting over this is to format the iPod for Windows, then it can be used on both platforms but all software updates would have to be done on Windows. Another way is to format the iPod for Mac use and use some 3rd party software such as XPlay2 which will allow a Mac iPod to be used on Windows.
Since Windows iPods should work on a Mac, you may have some success using a program such as Yamipod. This is a free program that transfers music and playlists etc from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Or, since you have access to both computers, how about this?
Switch 101.
That's an easy way to migrate your files from Windows to Mac.

Can I Windows format my iPod using a Mac?

...Might sound like a stupid question. I have an iPod with 5600 songs and a dead iMac with all my iTunes library on it. I need the iPod to be Windows formatted to work with the Blue&Me software in my car, but I want to buy a Macbook as my new computer.
Is this doable?
Thanks!

If part of your question involves getting music off of your iPod onto a laptop or PC the article below was very helpful to me. It's a few years old, but I believe the basics are still the same.
http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/P0/
I'm not 100% sure, but I think if an Ipod is formatted for windows it will still synch to itunes on a Mac. It won't work the other way around....Windows PC will not read a Mac formatted iPod.
Hopefully someone will correct me if I am wrong.
M.

I let windows format my ipod nano?

Today I bought a new ipod nano but the only one in store was an openbox ipod. since i am in a time crunch i decided to risk it and get the openbox ipod. i then took it home and plugged it into my pc (windows 8). a windows popup appeared that said i needed to format the disk to continue. so without thought i said ok. windows then reformatted my ipod. the ipod now does not turn off but instead displays black and white "do not disconnect" and "OK to disconnect" screens. holding down the sleep button and the home button result in the apple symbol and then it says to plug it into itunes. when i do so itunes doesnt recognize it. i have the latest version on itunes and have uninstalled and reinstalled itunes.
my main question is how to do a factory reset. i know how to do it once the ipod is recognized in itunes but not otherwise.
Cheers, T

Hello Telly64,
Thanks for using Apple Support Communities.
To troubleshoot this issue of your iPod nano not appearing in iTunes please follow the steps in the article below.
iPod nano not appearing in iTunes
http://www.apple.com/support/ipodnano/assistant/itunes/
Take care,
Alex H.

Windows format / ipod not recognized

More of a 2 part question.
I am having the same problem as everyone else. Updated to 5.0 and 5.0.1 and my ipod is not longer recognized by itunes. I've followed all the different tutorials and "5 step fixes" and nothing works. I ran through the 5-step fix multiple times with each step being a success. Still itunes doesn't recognize the ipod and windows doesn't recognize it correctly. When I try to use ipod updater it either freezes or says "ipod service error"(something like that).
So without the ability to use ipod updater to install the new software or restore the ipod...my only option is to do a windows format of the ipod. If I do a windows format is ipod updater then going to work and let me install the software?
If you have any ideas of how I can fix it without formating that would be great, but Ive done everything I could find on these forums with no avail.

Hello heuriztic,
The problem very likely is due to your XP's USB port, try to connect with other port first, if not works, try to plug and replug your iPod with your PC and hope it can recognized.
It will be fine if you can find a way to format your iPod with your PC. I am a bad PC user, but I believe you cant format it without a 3rd party software. I faced the same problem as your with my brother's iPod, I managed to solve it by first refomatted it by my Mac, and do a restore of iPod update with the PC afterward
It really works and hope you can find a friend with a Mac machine for you to fix your problem

Possible to move itunes from windows formatted ipod to a mac?

I would like to move all my music from my windows formatted ipod to my mac book. Ive tried looking up info but get lost around the parts that only specify moving itunes from mac ipod to a windows...

If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve music files and playlists from your iPod. I use Senuti but have a look at the web pages and documentation for the others too, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. This is just a small selection of what's available, you can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
Senuti Mac Only
PodView Mac Only
PodWorks Mac Only
iPodDisk PPC Mac Only (experimental version available for Intel Macs)
iPodRip Mac & Windows
YamiPod Mac & Windows
Music Rescue Mac & Windows
iPodCopy Mac & Windows
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod
If your iPod is set to update automatically you need to take care connecting to an empty iTunes. You can use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on a Mac hold down the Option and Command (⌥ and ⌘ Apple) keys. This will stop the iPod from auto-syncing with iTunes and it will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer: iTunes Keyboard Shortcuts for OSX
Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using most of the utilities listed above your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
Keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

How do i transfer my music on my Windows formatted iPod to my new iMac?

HELP! Just bought a new iMac (yes, I finally converted!), but now I can't transfer/access my music from my Windows formatted iPod to my iMac.
i know that the iPod needs to be reformatted on the iMac but i'll lose all my music, won't I?

*i know that the iPod needs to be reformatted on the iMac but i'll lose all my music, won't I?*
Macs can read Windows formatting so you should be able to connect and use the iPod on your new Mac without any problem. One proviso is that up until now Apple has only fully supported using the iPod shuffle in FAT32 format on Mac (unless the range has been expanded to include the iPhone and the iPod Touch which I've no experience of). What this means effectively is that if you need to apply a firmware update for your iPod and you wanted to maintain the Windows format you would have to do it on a PC. If you were to try and update a Windows based iPod on a Mac it would be restored and reformatted to the Mac file system and have the Mac firmware installed.
*I can't transfer/access my music from my Windows formatted iPod to my iMac.*
Connect your iPod to your new Mac. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. When your iPod appears in the iTunes source list change the update setting to manual, that will let you use our iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod
Once you are safely connected there are a few things you can do to restore your iTunes from the iPod.
The transfer of content from sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve music files and playlists from your iPod. I use Senuti but have a look at the web pages and documentation for the others too, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. This is just a small selection of what's available, you can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
Senuti Mac Only
PodView Mac Only
PodWorks Mac Only
iPodDisk PPC Mac Only (experimental version available for Intel Macs)
TuneAid Mac only (iPhone and iPod Touch compatible)
iPodRip Mac & Windows
YamiPod Mac & Windows
Music Rescue Mac & Windows
iPodCopy Mac & Windows
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod to a computer
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
Keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

What happens when you format your iPod in windows?

I had been having major problems with my iPod... you know not getting recognised on the PC. I read a thread that said format it. So off I went thinking that the iPod still didn't work on the laptop. connected the ipod tried a restore, but was told there was an error. remembered someone writing that an ipod could be fromatted in windows to solve the problem. did that, updated itunes. laptop asked again to restore then came up that the ipod was not recognised in the restore program. all I get now on the ipod screen is the apple and a folder with exclamation saying www.apple.com/support/ipod. what do I do from here?

On in this case, have a read the following:-
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/ipod/download/
http://www.apple.com/itunes/download/
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iPod Updater and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning ! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery replacement (with pictures)
http://www.kokopellimusic.us/KM_instructions.htm
Have I tried this myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.

How do I change my Ipod from mac to windows format??

How do I change my Ipod from mac to windows format?? My Imac is not working at the moment, but I want to use my Ipod on my PC. How do I get my Ipod(mac formated) to get work on my PC??

Use iTunes on the PC to restore the iPod, or install XPlay on the PC without changing the format. Restoring the iPod will erase everything on it.
(25085)

Problems transferring photos from a Windows formatted iPod Photo to new G5

Hi all,
I have recently come back from an overseas trip where I stored many many photos on an iPod Photo, using a PC with Windows XP. Now that PC is stuck in the repair shop - most likely not worth saving - and I have bought myself a G5 with OS X and iLife.
Basically iTunes can recognise the number of photos on the iPod, however I cannot view them when I open the Photos folder when in the disk drive. Two folders come up: 'Photo Database' and 'Thumbs'. (I hope I haven't lost the HI RES photos!)
I know there was one post that mentioned creating an empty folder then sync it using iTunes in order to transfer the photos from the ipod- I'm just a bit weary of losing all the photos seeing a warning message displays a similar note.
I thought Mac computers can recognise Windows formatted devices/docs. May it be that the iPod needs to be updated?
I'm calling out to all Mac-savvy users out there who may be generous enough with their time to solve this annoying issue.
Cheers.
iMac G5 Mac OS X (10.4.4)

same thing happened to me. I purchased iPod Access from the internet (for about $15). This program will let you transfer your music and playlists from your iPod to your library

Transferring songs from a Windows-formatted iPod classic to iTunes on Mac

Hi everybody, I'm curious to see if this is even possible. My husband's Windows laptop died for the second time in three years, so he decided to switch to a Mac after seeing my MacBook last longer than both of his Windows laptops. :o) Anyway, now that the Windows hard drive is dead-and no, he didn't back up his songs to CD-he wants to transfer the songs on his Windows-formatted iPod Classic to iTunes on his Mac. I tried Yamipod, but it said "firmware unsupported" and quit-I suspect the Windows format had something to do with it. He has a lot of songs ripped from CDs and he doesn't want to lose them or have to spend time re-ripping them. Any ideas?
Thanks for your help!

same thing happened to me. I purchased iPod Access from the internet (for about $15). This program will let you transfer your music and playlists from your iPod to your library

Do I need to format my iPod on Windows to use it as a hard drive on a PC?

I use my iPod on a MacBook with my iTunes library, but now want to ALSO use it as a simple hard drive on my PC for files transfer.
In the Windows explorer, I am told that it is not formatted and I am proposed to format it, which would erase all data on it.
Do I need to format my iPod on Windows to use it as a hard drive on a PC?
(I don not have iTunes installed on that PC currently)
And if I have to format it, will all my music be gone, but can I simply then synch it again on my MacBook with my iTunes library?
Thanks a lot in advance.

To use the iPod Classic on both the Mac and Windows PC, you need to format it in FAT32 filesystem structure, which both OS can recognise.
Yes, formatting it in FAT32, using iTunes, will erase all music and data in your iPod, but that is no problem if you have all the music in your Mac iTunes library.
So to do this,
Install the Latest iTunes in your windows PC, run itunes and check that all is in order (you can navigate, play some sample songs in itunes.)
Connect your iPod to the Windows PC, USB 2.0 port (please dont use USB hub with iPod Classic, -my bad personal experience, freezing itunes and windows)
iTunes will pop a windows asking you to reformat it in FAT32 and Restore
Click ok. (HERE there maybe some problem, if your iPod hardisk is not in tiptop condition)
When Restore is complete, eject the iPod
Connect it to your Mac and sync iTunes library.
If you want to use the iPod in Windows as an external hd, you have to set it in Disk Mode. first then Windows will recognise it as a portable HD.
Good luck! on this big undertaking.

How do I format my IPod Shuffle to be used on Windows?

My computer doesn't reconise my IPod is there, and I think I hav to format my IPod to workon Windows instead of Mac...how do I actually do this?

I am extremely interested in resolving the same issue. I think I have exhausted my options and I believe the issue I have is exactly what is described here. Nothing seems to work since both the windows explorer and itunes do not recognize the iPod shuffle so I can't "get to it" to fix it. My daughter's friend gave her the iPod shuffle and we believe it's been formatted on a Mac. We use PCs in our home. When I plugged in the USB docking station, the iPod blinks orange light for about 4 times and then absolutely nothing happens. I tried the device management options and I can't seem to find/locate where the iPod "drive". Can someone please help with detail instructions on how I can reset/restore this iPod shuffle so I can use it on my PC based iTunes?

How to use Windows formatted iPod nano to move music to a new Mac?

Hi all,
I need to transfer my iPhone's musics, songs, apps and photo, etc to the Mac and I came across this http://support.apple.com/kb/HT1329" guide at Apple Support site since I owned a iPod nano.
My questions is since my iPod nano is configured for Windows will the Mac be able to read it since it's stated clearly in the guide "While a Windows formatted iPod may work on a Mac, Apple supports this configuration only with iPod shuffle."
If I follow through the guide, 1. Switch the iPod to manual update and enable disk use, 2. Locating and consolidating the iTunes Media folder, 3. Copy iTunes folder to iPod. I will still need to restore the iPod to work in Mac and end up nothing left inside meaning songs, photo all erased.
Also, anyone using third party software like http://www.fadingred.com/senuti/ Can advise if it's good to use this? And if iPod nano configured for Windows can works with this?
Need other more solution other this to transfer the mentioned data to Mac.
Thanks.

darrengbl wrote:
I need to transfer my iPhone's musics, songs, apps and photo, etc to the Mac […] since I owned a iPod nano.
iPhone… iPod… iPod Nano… which one it is? You are trying to transfer music from what source, using what medium, and to what target?
I came across this http://support.apple.com/kb/HT1329"
it's stated clearly in the guide "While a Windows formatted iPod may work on a Mac, Apple supports this configuration only with iPod shuffle."
Where exactly is this stated? I am unable to find this statement in the KB article you mentioned. And are you talking iPhone or iPod? This KB article applies only to iPod.

Safe to windows format my iPod?

Similar Messages

Maybe you are looking for