Safegaurd User master Data during a System Copy
Hello Gurus,
I have a 3 system landscape and we are planning to have a system copy from PRD to QTY. Can any one suggest me the available options for safegaurding my User Master Data and retain it back as it is... What is the best practice methods that can be done in this scenario.
Points gauranteed...
Br,
Sri
Hello Raghu,
User master data will get copied from source system during system copy. However if you want to protect this then I would suggest an unconventional way. In case you have CUA then before system copy you need to discontinue CUA.
After this make a transport of all the roles along with user assignment. Include this transport in a transport of copies and release it with a target though please dont import it in the target system.
After system copy is done follow the following proceedure.
Delete all role assignments that the users have.
You can make a CATT tool for this.
Once user deletion is done import the role tranport with user assignments.
Now reset CUA and do SCUG activities.
Hope it helps.
Please award points accordingly.
Regards.
Ruchit.
Similar Messages
-
How to send User Master Data through XI
Dear SAP gurus,
We are currently configuring the e-recruiting module on a separate server than HR (following the SAP standard).
As our CUA is not connected to the E-REC systems, we are looking for a way to send properly the User Master Data from HR systems. We have seen that the report RSCUSND enable us to send iDoc with message type USERCLONE, but this repport can be only run from the CUA then we can t use it.
Another solution is to make a client copy with the profile SAP_USER, but we can t use this solution because in order to get the User Master Data in a real time we should make the copy each 15 minutes.
We can t figure out with the question, what is the standard way to send User Master Data to our E-Recruiting module
Regards
HadrienHR side:
1-Below t-code is what you should go through:
SM59
BD64
WE20
WE21
2-The key interface object is as below(I used it in LSMW, XI should be the same):
Business Object HRMASTER
Method SAVEREPLICAMULTIPLE
Message Type HRMASTER
Basic Type HRMASTER02
XI side:
1- The XI has the HR interface package in IR. You just need to select those you need.
2-Goto ID and do interface mapping between IDOC interface & XI outbound interface
All above is the skeleton processes. U can consult with XI consultant in details.
Hope helpful.. -
Export and import change document for user master data
Dear Gurus,
I have two queries on change document for user master data:
1. Are there any approaches to export and import change document for user master data?
We often do system copy from PRD to QAS for UAT and troubleshooting. Before system copy we export the user master data from QAS and then import after the copy process. We would like to keep the change document for user master data on QAS from being refreshed from PRD for security reason.
2. Change document for Role change in QAS
When the role is created or modified in DEV and then transported to QAS, the role change document doen't include this change log. The role change document in QAS only records those role changes directly made in QAS.
Could you advise this is by SAP design or are there any approaches to record this transported role change in the role change document in QAS?
Thanks
YBY1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
Cheers,
Julius -
How To... Update Master Data during upload of transaction data
Can anybody let me know how this can be achieved.
I have datasource (Legacy not R3) where I am getting both master data and text for number of infoobjects.
I dont want separate datasources.
The datasource is actually transactional datasource.
I dont need text in the cubes or DSO I need the text tables of the infoobjects to be updated.
I could find this on SDN but do anyone have document based on the below link.I was not able to find it.
How To... Update Master Data during upload of transaction data
Thanks.Dear Praveen
I guess yr req is demanding the knowledge of Data Unification and Synchronization whose scope is a bit outer the area of BW.( its MDM actually )
In BW we could very well fetch data out of different data sources (even across the different system) with no issues so why not u trying that. if there is any issue implementing that then please specify what kind of trouble you are interfacing...
I got the below link which may be helpful
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bd6389-0a01-0010-eb95-d45835d446a8 -
Maintain output device in user master data
when we try to print the Purchase order smartform we are getting the
following update terminated error message.
" Please maintain output device in user master data".
1. If we maintain output device in my user profile as any printer name
then we are not getting the update terminated error message.
2. when we select the network printer it is always printing
using the output device maintained in the user profile (example
LOCL). it is not printing using network printer.
when we select the network printer it should overwrite the user profile
output device.
Can we have the network printer selected irrespective of the printer
maintained in the user profile?
Please provide the solution
Title was edited by:
Alvaro Tejada GalindoHi
If you mention printer as LOCL the system will use network printer and the printer will be controled by Windows.
If you specify printer name the printer will be controled by SAP.
I hope now you can re-analyze your issue.
Regards
Surya. -
Deleted User Master Data with SQL Server Management Studio
Hi All
I've, recently restored an ECC 6.0 backup onto a test system. In an attempt to quickly delete most of the User Master Data from the source system, I deleted the User ID's from the USR02 table using SQL Management Studio.
But within Transaction su01, the User ID's that were deleted that way, still show up in the "F4" search. I can select one of those deleted ID's, but get an informational pop up stating that the user does not exist, if I go to display.
Does anyone know of a quick way to delete these User ID's from the "F4" search pop up?
The only way I've found so far is to select the User ID, recreate it and then delete it from the su01 transaction. This is going to take me hours.
Tried to save time, but caused more of a head ache.
KenThanks Brian
Yes, I have done this in the past as well. Although for this instance, I needed to keep about 20 of the 100 + User ID's that were in the system, and was hoping for an easy way to do it.
In Table USR02, it was easy to pick all, but the 20 and delete. (Sometimes we think we're smarter than we really are I've since spoken to a Security team member and found out about there's a way to do "Mass" changes in transaction su01.
tcode us01 -> Environment -> Mass changes.
Ken
Live - Learn - Laugh -
User Master Data Changes in CUA Environment
Hello,
when a new user gets created.we have requirement for Indian system to set the decimal notation in user master data by default to 1,234,567.89 ,instead users doing it manually using SU3.We are using workflow tool for user creation.Globally our systems are connected to CUA system.User gets created in CUA system and then master data is distributed through IDOC to child systems.
Now by defalut it the decimal notation is set to 1.234.567,89.Dear Sagar,
Try to see which tables are changing when you chage that field with help of ABAP and then incorporate the same logic in your workflow for India User. I think there will be a need to add one more field in your workflow and should be done.
But make sure you put some logic in your workflow if this India user then add this new field.
Regards
Shailesh Mamidwar -
Maintain out put device in your user master data
Hi Experts,
My invoice is not get printing, it is giving error as maintain an ouput device in your user master data
I have maintained output in SU01->user id->Default->printer name.
still invoice is not printing it is giving same error & if i directly give print it gives error
*An error occurred while output was being issued. It is possible, for example, that the form to be issued has not been activated or has an error. An error may also have arisen while the data to be issued was being edited.
Procedure
Check possible causes of the problem.*
if I go in SP02 & check that spool request gives following error
Spool request 29,663 in system SPS is empty
If i send it by ZPDF it gives following error
OTF end command // missing in OTF data
Error in function CONVERT_OTFSPOOLJOB_2_PDF
can anybody guide me?
Thanks
TruptiHello
Try using Tcode SPAD.
Kindly refer following links for reference:
- Please maintain an output device in your user master data. - Smartform
- Maintain output device in user master data
- update was terminated: maintain output device. How to avoid?
Thanks & Regards
JP -
Any difference between Master data and User master data ?
Any difference between Master data and User master data ?
hi
A user master record defines the authorizations assigned to a user. Based on these authorizations one can access the master data.
Master data - it is the data which is used long term in SAP r/3 system such as vendor master , material master, customer master,
there is no such thing like user master data to the best of my knowledge
hope this helps
regds
Manan -
*Journal Entries while uploading the vendor master data from legacy system*
hi SAP Folks,
can any one of you tell me the journal entries while uploading the vendor master data from legacy system to SAP system.
Eg: legacy system is having 10000 vendors list, 1 reconciliation account and $ 1000000. while uploading all these data from legacy system to SAP what are the journal entries we get.
thanks in advance.
Edited by: ravindranath manikonda on Nov 24, 2008 1:12 PMHi
you will be having only one entry logically
i.e. Opening Bal. clrng A/c Dr.
To Vendor A/c Cr.
regards -
Upload vendor master data from legacy system to internal table tcode xk01
through batch input program how to upload vendor master data from legacy system to internal table and then to SAP R/3 database(transaction XK01) by using recording method.
By learning the basics of BDC recording and the use of GUI_UPLOAD
-
Insert data in a user master data Table
Hi every body,
I've created a User Master data table named 'MyTable'. i want to add data to this table but there is an error which occur : 'to generate this. First Define the Numbering Series in the Administration Module'. I want to add data to this table using C# code, without using UDO.
Is it possible?
Thank you for helping me
HaifaHi,
thank you for your answer.
I didn't understand very well, i will ask the question in an other way.
it is possible to insert records in a master data table by using the code C#
I mean :
usertable = _Company.UserTables.Item(tablename);
usertable.Code = code;
usertable.Name = name;
usertable.UserFields.Fields.Item("U_ContCode").Value = ContCode;
usertable.UserFields.Fields.Item("U_CardCode").Value = CardCode;
lRetCode = usertable.Add();
without encountering the problem of numbering series.
Haifa -
Master data from multiple system compunding to source id
Hi all,
We have a requirement to host multiple Country SAP systems in one BW system. This requires compounding with an infoobject key on all the master data and I am using 0soursystem.
and found that this configuration is very cumbersome( time taking) we need it to be cost effective also.
Is there any other way of doing this and at the same time make the Data unique to the Country.
note: one of the system is in production for 2 years now and loose that data.
Regards,
NPRHi,
a) what about harmonizing master data over all systems and defining one system as the leading master data system?
b) While uploading the master data, do a concatenation of the key (material no. with the source system id or something similar)
c) assign a complete different key to the master data and post the original key to a nav. attr. and use the nav. attr. for reporting e.g. material 4711 --> change the key to 0001, post the original no. 4711 to a attr. called zmat_orig which is added as nav.-attr. to the attributes.
regards
Siggi -
Error : please mention output device in user master data
I am new to ABAP development.I have created a smartform of address as a main window,then call the function module in a report program. When i run that report program, i m getting screen asking for output
device saying "please mention output device in user master data".
In main window, i have selected an address number whose details is to printed in the form,but instead of displaying the address, it's asking for output device.
can you please tell me where lies the error & how to get rid of that?Hi Anupam,
Refer this [wiki|https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/massAddressorLabelPrintinginSMARTFORMS]
Regards,
Sravanthi -
Add master data during transaction load
While loading a oDS can I add new entries into master data infoobject.
I don't want to update master data. I need to add new master data along with its attributes.
Like a new material is found in invoice that's not in material-master.
Using the invoice I want to add the material into material masterHi Rohini,
Here is the link -->
http://service.sap/com/bi -->services & implementation --> how to guides --> guide list SAP BW 2.x --> How to... update Master Data during upload of transact. data
Cheers,
Sree
Maybe you are looking for
-
Two different plans in TEST & Prod
hi, we have a problem in production database where we find some sql statements running very slow. but if you run same SQL statement in TEST it runs < 2 secs. Production DB Prod.SchemaA is exported into TEST DB as Test.SchemaA When study the explain
-
My iTunes library will not open because it was created with a newer version
When I try to open iTunes I get the following error message. "The file iTunes.itl cannot be read because it was cretaed by a newer version of iTunes. This happened after I downloaded version 7 in September. I can see that my library is intact but can
-
Report Viewer Dynamic Parameter List not showing a complete list of values
Hi, I have installed the crystal report runtime 13.0.1.220 for framework 4.0 in a 64-bit windows 7 professional server. I have an aplication that opens crystal reports using the crystal report viewer control for visual studio 2010, also version 13.0.
-
The iTunes itl. file can not be found
iTunes won't open and i tried to reinstall it and it says the same thing wat do i do?
-
Generate Components Dynamically
Dear All, Case: In my application i have a textfield Problem: Depending on the number inserted in that text field (i.e 4) iam generate 4 labels and 4 textfields and add this components on a panel like that | A | Enter your text Here | | B | Enter you