Safest and Easiest way to update nokia xm 5800 to ...

I've been trying a lot to update my 5800 xm firmware from v31 to v40, I used Ovi Suite and NSU it takes a lot of time and there is a good chance that you'd run into some errors, so what I did, and I dont know why it wasn't it suggested to me here..I just connected my device to my WiFi connection and updated the software, followed the instruction, it's so simple, and my device works fine, no bugs AT ALL whatsoever, I recommend you to update to v40, if your code doesn't support it yet, dont attempt to change your code in any way, just wait till it's available for your code, you can update by entering *#0000# then searching for updates.
v40 is BUGS-FREE! 0 bugs!

i would always go for OTA over pc as the pc often intends to be the problem when updates goes bad.
I always make sure that my pc is running fine - no driverissues and all updates are installed. - I have never had any trouble updating with XP prof, Vista 32 and 64 bit and now W7 64 bit.

Similar Messages

What's the easiest way to update my site regularly?

What's the easiest way to update my site? I update with new content every month, sometimes more often. (I don't use .mac) When I do, I delete my whole site, then have to upload the whole site with it's updates (the main file along with the index file).
Is there a way to only update, let's say, ONE page? And if so, will I still have to delete that page?
Thanks!
http://faithmountainaz.com/FaithMountain/Home.html

Hi,
I wrote my personal experience in that thread:
http://discussions.apple.com/thread.jspa?messageID=5431205&tstart=0#5431205
I think you will find all you need
If not, just ask...
Enjoy your day,
Cédric

What is the best and easiest way to speed up a Mac-MINI?

What is the best and easiest way to speed up a Mac Mini without adding memory?

I'd tried to reply yesterday to your question but for some reason it didn't go anywhere and I got a red message box in the Discussion post area with "error." After trying three times, including log-out, clear cookies from browser (and history) and back in, I still was unable to add my post with links to resources for your Mini, here. And the last time I tried that, the copied text also went missing as I found it gone after considering to make a Text document of it, for later posting.
Anyway, the http://iFixit.com site has guides on how to replace RAM in the computer you have. Note there are different models shown and from what I remember, yours is the last 'old look' Mini with an optical drive. The model after that is thin, a 2010 model with slot in front for discs; the next one has no internal optical drive.
RAM specs: 2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM (replace pair) up to 8GB total. Best price would be an online vendor of repute, once you know about what they sell for, you could ask a local mac expert if they could get you a better than retail price. I get ram from OEMPCworld and shipping is about $1. including insurance to my post office box, priority or 1st class. At about half retail. Crucial (website) offers parts, too; and so does OWC (other world computing).
In addition, I recommended checking into the build specs and quality of the OWC (esales) site for external enclosures with their own power supply, for hard disk drive; for storage and bootable clones on different partitions. And see about Bombiche Carbon copy cloner, it is a commercial product now, not donationware. I've used it successfully to make competely bootable clones on a suitable external HDD (drive should have own power supply, too) A 750GB HDD in a self-powered enclosure that can boot Mac OS X from a clone, is a good start on backing up your upgraded OSX in a way you can clone it back into an empty, wiped or new HDD inside the computer; and it can run from the external. You can't necessarily use a TimeMachine that way.
This should be your Mini -- check other indicators to be sure:
http://www.ifixit.com/Device/Mac_Mini_Model_A1283
A serial number lookup site such as the one I end up using because I had it bookmarked is OK: http://www.powerbookmedic.com/identify-mac-serial.php & also have mactracker http://mactracker.ca
Anyway, before I time out or exceed post content(?) This is not all I meant to write before.
Good luck & happy computing!

100% Cheapest and easiest way to Charge iPhone 3G in your car - Works

OK So i have spent a long time in these forums, and other forums, looking for a way to charge the iPhone 3G in my car. There have been lots of posts explaining why current chargers wont work and because of the firewire pins being removed etc, yet noone has posted the cheapest, quickest and easiest way to combat this problem.
All you have to do is puirchase the following item for £6, there may be a store right by you, plus your existing charger cable into the outlet (because your existing charger cable has the correct pin configuration) and it will charge straight away.
http://www.maplin.co.uk/Module.aspx?ModuleNo=99487&criteria=car%20charger%20usb& doy=3m8
Or search for item A66GA on www.maplin.com if the link doesnt work
Its cheap, easy, works, (i know this because i bought one) and it wont burn a hole in your pocket.
This unit puts out exactly the correct requirment for the iPhone 3G to charge, 5v at 1000mAh. This is what is written on the box, ignore the FAQ response on the site.
The only problem is you have to take your cable with you if you need to charge in the house, but im sure you can buy a spare cable somewhere quite easily because if you broke yours for example, you wouldnt be able to charge at all would you? and although Apple arnt the best im sure they would understand they need to offer speare cables.
Hope this solves the issues people are having.
Cheers,

You can't beat this deal. Buy this:
http://www.monoprice.com/products/product.asp?cid=108&cp_id=10826&cs_id=1082602&pid=3523&seq=1&format=2#description
and this:
http://www.monoprice.com/products/product.asp?cid=108&cp_id=10831&cs_id=1083101&pid=2732&seq=1&format=2
monoprice is by far the way to go for accessories. Screen protector is dirt cheap as well.

I have a camcorder (JVC Everio with hard disk internal drive) and it records file as MOD. When I dowload thru I movie it ceates a .mov file. What is best and easiest way just to convert to MPEG filesZ?

I have a camcorder (JVC Everio with hard disk internal drive) and it records file as MOD. When I dowload thru I movie it ceates a .mov file. What is best and easiest way just to convert to MPEG files?

I have a camcorder (JVC Everio with hard disk internal drive) and it records file as MOD. When I dowload thru I movie it ceates a .mov file. What is best and easiest way just to convert to MPEG files?

HT1338 I am trying (without success) to design an organization chart on Diagram Painter, please advise fastest and easiest way to complete this task?

I am trying (without success) to design an organization chart on Diagram Painter, please advise fastest and easiest way to complete this task?

Purchasing an app from the App Store does not mean that Apple's forums are the right place to ask questions about it. Asking about it here is roughly similar to asking another customer at Wal-mart how to assemble the bicycle you bought there. Ask the company that created the app, using the link Bob gave you.

The quickest way and easiest way to answering a call?

Hi, can someone give me some tips for the quickest way and easiest way to anwering the call without having to unlock the phone and key in the passcode (well i set up the passcode on my phone). Thank you

To answer a call when the phone is locked and the passcode is enabled, you don't have to enter the passcode, just slide to answer.

Easiest way to update my IPAD 1 to iOS 5.1.1

Easiest way to upgrade IPAD 1 to Ios 5.1.1

See
iOS 5: Updating your device to iOS 5
http://support.apple.com/kb/HT4972
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Fastest and easiest way to transfer system & files G3 to G5

I have a G3 b&W with a 400 firewire card in it, and two basic ATA hard drives. Which would be easiest way to transfer 10.3.9 system (with classic) by means of Carbon Copy Cloner, and all files to a partition on the G5 Mac.
Since the G5 has 400 & 800 firewire, or ethernet transfer.
I think Migration Assistant will help with the transfer, but not sure wich way to go about this.
Berry

Hi Berry, to use CCC you need an older version for 10.3, version 2.3, because the B&W doesn't support FWTDM.
Put the G5 in FW Target Mode…
http://docs.info.apple.com/article.html?artnum=58583
Wait for the G5's HD to show up on B&W.
But, if perchance it's just Classic you need, you can Simply copy OS9's "System Folder" & "Applications OS9" over.

Best and easiest way to Overclock?

Been thinking lately about power management for my phone, with regard to saving the battery when I am not using much, and then maybe getting a bit more oomph when I need it.
What's the best way to achieve this, preferably with a GUI instead of X Terminal and SUDO rights (still a little scared of that one)?
I've installed a few Kernel things and CPU Freq apps too, but I am not sure which is the best and the easiest to implement.
Any help would be greatly appreciated...
If tnis post is a cure to your issue, please MARK IT AS SOLUTION.
If this post has helped anyone in any way, PLEASE SHARE YOUR KUDOS, by clicking on the GREEN STAR.

richwhite wrote:
Ceroreoberts: when a new kernel is released is it auto updated? I had no update flashing in the status bar about it. And if we have to update/download manually does it affect our settings or seamlessly integrate in the background?
CPUFreq widget isn't actually meant to drop to 125. I spoke to the developer about it and he thought it was strange mine was at 125 and said it was because i was using a custom kernel, then he updated it and asked me if it still went that low, which it did. Anyway, it always dispalyed 125 but Conky showed it at 250, so i wonder if it just tells 125 on a custom kernel but actually doesn't change the minimum freq
the kernel should autopopulate, though this latest update installed seperately and still left the previous one there with a note to uninstall it.
this is probably because i believe he included thedrives for the fcam support to be integrated in this build rather then a seperate install.
but normally, it does it automatically.
i use xterm alot and just do a quick apt-get upgrade from time to time to check what has been done.
you can also do an apt-get update in xterm and it will update your repos.
as for the cpufreq.....there are two different ones...named very close.
i have both installed.
the first one is cpufrequi.
this one is a drop-down type that i use mostly. and i am not sure, as it doesnt show it, that it auto-drops the low to 125mhz. but conky confirms that. (this may also be because i have both installed)
the other is qcpufreq.
this one has a slider that you can change the high freq from 125mhz-1150mhz. but it actually shows you that the low is automatically 125mhz.
this low freq is most likely because of the kernel i am using, which is very stable, and anyone can install it from the repos as stated above. it is the one that i use.
NOTE- though, i have been forgetting to actually OC my device lately because the black plastic theme is just awesome and fast, especially combined with the custom transitions settings applications all set to 10.

Easiest way to update all apps on iPhone 5S without having to click update for each one under the apps tab in iTunes

After I've used the download all updates option under the updates tab in the iTunes library Apps view, when I plug in my device (iPad or iPhone) and go to the device apps view I now have a button to the right of each of those apps that says "update" instead of "remove" or "install".
The problem is that my app library is enormous and often there are 20+ apps that had updates at one time and it's a royal pain having to scroll through the entire list to find the ones that have the "update" button that needs to be clicked.
Unfortunately iTunes doesn't have a sorting option in the pulldown called "updated" to bring those to the top.
Is there any way to easily select all of those apps rather than having to manually scroll through my whole library hunting for them just to click the update button?

Hi Twilight_Face!
You can always try a backup and restore in an attempt to get rid of these apps that were interrupted during the download and are no longer available:
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
Take care, and thanks for visiting the Apple Support Communities.
-Braden

What is the easiest way to update Eclipse in Flash Builder 4.6.1 to Eclipse 3.7.2?

I've just installed FB 4.6.1 and I notice that it is still using Eclispe 3.7.0. What is the easiest to update Eclipse to 3.7.2?

For Plug-in, Supported Eclipse version are 3.6/3.6.1/3.6.2/3.7, 32-bit
http://helpx.adobe.com/flash-builder/release-note/flash-builder-4-6-release.html#main_Inst all_your_software

2.1 Out and Best way to Update if you are a mobile me subscriber's

From My experience put your phone in to DFU mode and reset your phone back to new.
Remember this works for me and I recommend it if you use MOBILE ME.
Download the new Firmware and then follow the below
http://www.ifonenation.com/2008/07/24/how-to-put-your-iphone-into-dfu-mode/
once Itunes has installed the new firmware.
Then re-sync your data again, as if you just bought it.
If you use mobile me this is the best option for you as all your data is stored on apple servers and will update your phone from your mobile me account.
** you will loose the following... SMS and all call logs and your favorites some and all preference settings..
To eliminate any confilicts from apps etc this is the best way to go and give your iphone a fresh start.
I have always done this with the last updates and never had a problem with any conflicts, and performance issues.
Remember this is for mobile Me users as all you Contacts,Callender, and Mail is stored remotly.
Keep us posted on your 2.1 findings.
I have full 3g NOW! yay

The fastest way is to directly change the values in the catalog.pse9db database. The database is a SQL Lite database, so if you know (or know someone who knows) how to run SQL queries against a database, you're in luck because Adobe did an excellent job of designing a highly normalized database schema.
I highly recommend first trying this on a copy of your database. In general, the procedure goes like this:
Add one of your images on the P: drive into the catalog. This will establish a listing for the P: drive and its identification in the volume_table table.
Run a SQL query against the volume_table table to see a listing of all the rows.
Note the values of the "id" column for your "thehive" volume and the "P:" volume.
Run a SQL query against the media_table table to update the value of the volume_id column, replacing all instances of the "thehive" id number with the id number of your "P:" drive. The SQL query will look something like this:
Update media_table
set volume_id = "<your new value>"
where volume_id = "<your old value>"
I've tested this with PSE9.0.3 on Win7, changing the location from a CD on my E: drive to a USB stick on my F: drive.
Good Luck!
Ken

Easiest Ways To Update Offline Media?

We normally use PXE boot and deploy images across the network even though is seems slower since many computers are on a 100Mb connection due to sharing their network port with a 100Mb VOIP phone. We do this for convenience mostly because of the big hassle
of updating multiple flash drives whenever the image or task sequence is updated.
We could use multicast if we were doing many simultaneous deployments of the same image, but the majority of the time, we are reimaging one-off machines one or two at a time.
However, I just saw some hardware and software that seems like it could make using offline media more manageable if they were used together.
Instead of copying the Content folder manually one stick at at a time to USB flash media, is there any reason you cannot just mass clone multiple copies of the LiteTouchMedia.iso file to multiple bootable usb drives using ImageUSB http://www.osforensics.com/tools/write-usb-images.html and
a USB hub like this?
This software copies the ISO as if burning a DVD. It does not copy the Contents folder files the way you would manually create USB media for MDT.
If this works, then updating as many USB sticks as we can get on a hub wouldn't be much more difficult than just updating one USB stick.

We got them back at the same time by telling all of the remote technicians to send (FedEx) their flash drives to the corporate office. There was a period of time, maybe a week, where the remote technicians didn't have flash drives. That worked for us but
that's obviously not a technical item - it's a process item. Once all the flash drives were updated, which took about a day, we shipped the flash drives back out to the techs.
Mind you, we also had PXE booting for OSD through SCCM at all of our remote locations. So we approached the OSD question through a few different angles. (Flash drives, PXE + OSD, and also a "break-fix" location that machines could be shipped to.)
-Nick O.

Easiest way to update -git packages?

Hello!
I have installed the Dolphin emulator from dolphin-emu-git with yaourt -S and I have noticed that by running yaourt -Syua, it doesn't update Dolphin, even though there is a never version available.
Do I always have to re-install -git packages with yaourt -S to get the latest version? If so, is there any way for me to get noticed when there is a new version out? Or do I have to manually have to check now and then?
Thanks!

--devel will rebuild VCS packages.
As far as notification, every upstream commit is an update. You can set something up to get notifications there.
Last edited by Scimmia (2015-05-18 15:40:12)

Safest and Easiest way to update nokia xm 5800 to ...

Similar Messages

Maybe you are looking for