Safety Cameras not working on E7 with new map upda...

Since updating the maps on my Nokia E7 yesterday the Safety cameras are no longer showing. Traffic info is working fine. I restarted the phone, have the switched cameras off and back on, I have deleted the camera data file called 1.0.0.602europe.cdt in the E\Cities\diskcache\safetyspots directory on the mass memory of the phone and restarted maps to reload the file, but still not showing cameras.
They were there before the update when opening Nokia Drive
I would be obliged if anyone has any ideas.
Solved!
Go to Solution.

rsjuk wrote:
I have deleted the camera data file called 1.0.0.602europe.cdt in the E\Cities\diskcache\safetyspots directory on the mass memory of the phone and restarted maps to reload the file, but still not showing cameras.
Whilst deleting this is fine, you would need to reload previous version such as 1.0.0.579.europe.cdt and make sure that Nokia Maps application remains "Offline" otherwise it will reload 1.0.0.602.europe.cdt. This has happened before, but issue may not be rectified quite so quickly as Symbian a fairly low priority now.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

IPhone 4s back camera not working even after buying new iphone 4s

Back when the ios 6 updates were coming out in 2013 my iPhone 4 back camera stopped working, after trying way too many ways to reset the phone and finding others with this same issue I decided to start over I bought a new iPhone 4s so this one was better and 32gb instead of 16gb and it was 9 days later the back camera stopped working on my NEW iphone and still doesn't work to this day? What on earth should I do? How can this be fixed? I've tried hard reset, backing up the new phone, all the tricks I've tried on both phones do not work!!

A new phone has a warranty. So take it to an Apple store. If they can't fix it, they will replace the phone. Or do you mean: it stopped working after 9 days, but then you waited until the warranty ran out and then ask us?

Photostream not working on pc with new router installed

I have lots of apple products, and photo stream works between all of them, but struggling with them loading to my pc through photo stream.
It was working, on and off for a while. Some pictures would load, some not.
We installed a new router, thought it would fix it, now there is nothing!
Any thoughts?
I have windows vista.
some type of linksys router, I can find out if that's relevant.

Not sure if this will help, but you might check your router settings again this:
Recommended wifi settings
Troubleshooting wifi connections

Mac App Store not working - first day with new MacBook Pro

Hi guys,
I received a new MacBook Pro 13 inch with retina display today and have been working on it this evening but I have a problem: My app store won't open.
It was fine earlier - I downloaded both textwrangler and notepad - but now, whenever I click on the icon in the dock it bounces for a few seconds before simply showing a blank screen.
I have uninstalled my downloads from the day in the hope that it would prove to be a fix but nothing has happened. I live in the UK so it's too late for me to ring the store - it's past 10pm here - but I was hoping somebody could help me out!
Also - My iTunes doesn't work - whenever I try to purchase an album or listen to any music an error message pops up reading 'an unknown error occurred.' I'm not sure if the two problems are linked...
Any help will be greatly, and gladly, appreciated!

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

ServiceDesk software not working as expected with new Firefox version

After recently upgrading to Firefox 5.0, I have discovered that the ServiceDesk software I use with Firefox no longer works as expected. This software is ManageEngine ServiceDesk Plus 8.0. The problem is irratic but unique to Firefox. I don't have this problem with Chrome or IE.
The problem is this: When I open an issue, several fields become active, one of which is the description field where the user who sent the issue typed the description of their problem. When editing the issue and the active fields become active, sometimes this description field is completely blank, meaning their description is gone, but not really. I have to close the page and try to re-open hoping this time, the description will be shown. Also, there is a tab for me to enter a resolution when I want to close it. I cannot enter anything in this field, or rather I can, but when I save it, nothing gets saved to this field, so the user doesn't get to see my resolution. The default font for ServiceDesk is Arial, but I know something is amiss because the default font is Times. If the font shows as Arial, then I know everything will be okay.

I knew I would figure this out as soon as I posted it...
This is the behavior you see if the SamAccountName field is not included.

Camera not working on new profile

I have 3 profiles on this same Skype, on one laptop. 1 profile works fine but on second profile camera not working (video not showing), audio works fine. I created a new account (e-mail is same from second profile) and is this same - video not working. I dont understand what is wrong. This same laptop, this same camera, this same drivers/windows7, latest Skype, and from 3 profiles one working fine. Please help!!!

Try to reset all Skype settings.
Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old.
Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder.
Restart Skype.
N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

Old macbook pro3,1 (2.4 GHz Intel Core Duo) camera not working with Mavericks

I have an old macbook pro3,1 (2.4 GHz Intel Core Duo, I think 2007), builtin camera not working and I think it is related to mavericks update.
Anyone had the same problem, and if yes what is the solusion?

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

My camera not working with tango

My camera not working on Tango since i update my iphone 5s to IOS 8

Delete and reinstall the app.

Front camera not working

Hi, I was wondering if anyone else has had the same problem as myself in regards to the front camera not working. All I seem to get is a black screen! I'm not sure if I need to activate it somehow or it's just not working? Thanks Ross

UPDATE: After the intial Factory Data Reset, the camera work fine for one day. Now it's back to the same blank screen in the front camera. Also now my video camera isn't working either. I get an error msg "Recording in progress in another app. Cannot record". I know some folks were having issues with the "OK Google" app. I checked mine and all is unchecked. Spent most of the day talking with Sony and Verizon and neither was able to help me other than Verizon offered a refurbed phone. No thank you, my phone is new. **bleep** Sony? If anyone can help, it would be greatly appreciated.

Isight camera not working after the last update

After reboot of the last OS update
Isight camera not working...
i've tried photobooth, ichat, skype and it doesn't show up anywhere. in fact, when i go to system profiler, it doesn't show isight under USB connections at all.
just to give you a recap of what i've tried so far:
* restarting (obviously)
* resetting PRAM/SMC (by booting it the way it was specified in the isight troubleshooting thing)
* just shutting down my computer and taking the battery out for several hours
any Help pls
because i mast to use it as soon as possible in a conference

*A few suggestions.........*
Try running repair permissions from your HD and afterwards run +repair disk+ from your software install DVD.
my isight camera is not working-not recognized with photo booth or ichat
To fix your iSight, shut down computer. Reboot in safe mode (press power button and then hold shift key down). After computer boots, restart again. Hopefully, your iSight will start working again.

HP Mini 110-3700 built-in camera not working

I just bought my HP Mini 110-3700 (LV831PA#UUF) last january. I just tried using the HP camera twice to check if the image it captures is clear. Yesterday, i will use the camera for a video chat but the messenger said "Cannot detech the camera/ device is not connected).When I had clicked the link for the HP Camera it had open but the light indicator didn't have any light and the camera isn't working.
I already tried restoring the HP mini to factory settings but after that, the camera isn't working still. What should I do? Need help ASAP.
Thank you!

bamba-ista wrote: built-in camera not working properly. what do i need to do?
How to Troubleshoot iSight (also works with FaceTime and FaceTime HD cameras.)

Apple 4 camera not working

My iphone 4 camera not working it opens afters closing 2-3 times before but its can not open now i totaly reset,restore,formet and change software version but still now its not open that is 5-6 month now please tell me what to do now

There is no Apple here, this is a user to user forum. When you said you restored, then you restore as NEW?
If you restored as New and still the problem persiist, then it time to take a trip to the Apple store.

Camera not working on Lumia 535.

Camera not working lumia535
Moderator's note: The subject was edited. A new thread was created.

Hi, sanaayesha. Welcome to Microsoft Mobile Community. We'd love to know more about your concern. When you say camera isn't working, does it mean it's inaccessible, not taking sharp images, etc.? Does this happen to both main and secondary camera? Are you getting this issue regardless of the lens you're using? You can try checking the workarounds given on this link to further isolate the issue: My camera is not working correctly. The content of this link is applicable regardless of your location. Hope to hear from you the soonest.

Camera not work ipad 4generation before ios8 update

Camera not work ipad 4generation before ios8 update
PLease help

Hi Hellside,
Welcome to Apple Support Communities.
It sounds like there is an issue with the camera on your iPad. The article linked below has a lot of great troubleshooting suggestions for a similar issue on an iPhone but the suggestions should resolve the issue with your iPad too.
iPhone: Hardware troubleshooting
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
I hope this helps.
-Jason

LT2223 ThinkVision Monitor - Inbuilt Web Camera not working

Hi
I am using a LT2223zwC monitor which has a built in Web Camera but does't seems to be working - Skype cannot detect the camera and I have no idea how to get it work. Tried the Lenovo Web Conferencing from Control Panel, it only allows me to adjust the Speaker and Mic.
Any assistance is much appreicated.
Many thanks.
Gilar

Thanks For Information..
But I Am Using Microsoft Lifecam Studio Download Latest Software Microsoft life cam Version 4.25.512.0
This Is Not A Driver Issue This is Application Issue Or Windows 8.1 Issue
I Check 3 Different Camera but Any camera Not Working
I Check 3 Different Pc..
But In Windows 8.1 That Thing Not Work !
But This Thing Working Ok With Windows8
This Is Majjor Issue Of Microsoft Windows8.1
If I Download Other Store App Like Cammix The Software Give Me Hint..
Showing Me Error Like..
"windows.media.capture"media
capture is not registered, (This Error
Is Showing In Cammix Application)
And Microsoft Have To Provide Something To As...
Thank You For Support....

Safety Cameras not working on E7 with new map upda...

Similar Messages

Maybe you are looking for