Safety issues while using Sleepless & other software for iOS 10.7.4

Hi All,
I just wanted to know if it was safe to use software that lets you bypass the sleep mode on a mac book pro. Also is it safe to use software that alous you to controle the fan, ect. If it is ok then which software is best to use?

I'm not sure why you'd want to 'bypass' sleep mode, but you can do that through Energy Saver by setting Sleep to "Never," no third-party software needed. There are applications that let you control your fans but unless you're having problems, for instance, with your fans speeding up enough to control heat I find them useless and potentially harmful - Apple does a good job of fan control and if you're having problems then it's likely a hardware or software problem that can be solved with a SMC reset.
Clinton

Similar Messages

Mapping issues while using MapwithDefault Node function for Idoc

Hi Experts,
We are facing issues while trying to generate nodes at reciver side even though it does not exist at sender side.
we are using the matmas05 and we want the nodes E1marcm and e1mardm to generated at target structure.
the structure is like this
Matmas05
idoc
E1maram
segment
      E1marcm
        segment
          msgfn
          .....other fields
          E1mardm (can be many segments)
            segment
              lgort
              ..other fields
          E1mpgdm
             segment
             ...e1mpgdm fields
the mapping has been done like:
e1marcm -mapwithdefault-e1marcm
constant -segment
werks-mapwithdefault-werks
other fields(one to one mapping)
e1mardm-mapwith default-e1mardm
lgort-mapwithdefault(value 1000)-lgort
other fields -one to one mapping
now the problem we are facing is when e1mardm is not existing in source structure the values from the other node of e1mardm(which exists) are getting overwritten into it.
we want only the lgort to be 1000 and the segment should populate at target side.
like
e1mardm
segment
lgort value 1000
Could you please assist in solving this issue and give your valuable suggestions as how could we handle it.
Thanks and regards,
jyoti

U will achieve this using UDF function. Map the below Like.
e1mardm-mapwith default(Value Constant)-e1mardm
                                                        lgort (A) ---
e1mardm-mapwith default(Value Exit)u2014(EqualsS) (B)- (UDF1)- lgort
                            Constant(Value Exit)---
                                          Constant(Value 1000)(C)---
Other one to one mapping fields also you should use one more UDF.
                    Other one to one fields (A) ---
e1mardm-mapwith default(Value Exit)u2014(EqualsS)    (B) - (UDF2)- Target
                             Constant(Value Exit)---
UDF1:
Argument A,B,C and select queue.
   //write your code here
int j = 0;
for(int i=0;i<a.length;i++)
if (b[j].equals("true"))
result.addValue(c[0]);
i--;
result.addValue(ResultList.CC);
else
result.addValue(a<i>);
j++;
UDF2:
   Argument A,B and select queue.
    //write your code here
int j = 0;
for(int i=0;i<a.length;i++)
if (b[j].equals("true"))
i--;
result.addValue(ResultList.CC);
else
result.addValue(a<i>);
j++;

HT3743 HT4623 We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care.----How to fix this issue while setting up the iphone for the new ios?

HT4623 We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care.----How to fix this issue while setting up the iphone for the new ios?

If you don't have a SIM card in the phone, you must put one in. It's required for activation.
If you do, then your phone was probably hacked to unlock it from the original carrier. Contact them and see if they will unlock it. If they will not do so, then you can't use that phone.

Issues downloading the 5.0 software for the iPhone 3GS. Any suggestions?

Issues downloading the 5.0 software for the iPhone 3GS. Any suggestions?

Disable your firewall/security software.
This is asked and answered many times each day. The forum search bar is on the right side of this page.

I lost my administrator password and can not install Mavericks (or any other software for that matter). How can I find my administrator password?

I lost my administrator password and can not install Mavericks, or any other software for that matter. How can I retrieve an administrator password?

Forgot Your Account Password
For Lion/Mountain Lion
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see Reset a Mac OS X 10.7 Lion Password, OS X Mountain Lion- Reset a login password, and
     OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
     Mac OS X 10.6- If you forget your administrator password
For Snow Leopard and earlier without installer DVD
    How to reset your Mac OS X password without an installer disc | MacYourself

How can I export an .PLT file from Illustrator without using any other software but Illustrator

I'm in the URGENT need of exporting a file to .PLT and no using any other software like the producer's software.

You can't. AI doesn't produce .PLT files.

Mac-specific drivers and other software for Windows

Mac-specific drivers and other software for Windows how can I download them with out the install cd?

Or for the same price you can order a new Snow Leopard disk. http://store.apple.com/us/product/MC573Z/A?mco=MTY3ODQ5OTY
That would give you Boot Camp 3.0 drivers. With Snow Leopard and Boot Camp 3.0 you can install Windows XP, Vista or Windows 7. With Lion and Boot Camp 4.0 you can only install Windows 7. If you install Lion with Boot Camp 3 and XP or Vista already on it it will work.

Posting period issue while deleting a confirmation posted for a limit PO

Hi ..
I am facing an issue whiel deleting a confirmation posted for a limit PO.
Confirmation was posted for a limit PO in SRM and it created a service entry sheet in SAP. If I deleted that confirmation in the same posting period, then it is getting deleted. No issue here.
But if I deleted that confirmation in the next posting period then the reversal document is going to error in process. RZ20 is showing the error "Positng only possible in periods 2012/2 and 2012/3".
Posting date of reversal document is current date only and the backend posting period is 2012/3, but still it is failing with this posting period error.
If I tried to delete a confirmation posted for a normal PO then I could able to delete it even in next posting period by just changing the posting date.
Why this posting occurs while deleting the limit confirmation, even through the posting date is falls within the backenn posting periiod? Is it like, SAP system is trying to delete the service entry sheet in original posting period? Kindly help.
I am in SRM 5.0 (server 5.5) SP12.
Thanks,
Arun

OK.
Well, if the variable is not used in any interval selection, then I would say "something happened to it".
I would make a copy of the query and run it to check if I get the same problem with period 12.
   -> If not, something is wrong in the original query (you can proceed as below, if changes to original are permitted).
If so, then try removing the variable completely from the query and hardcode restriction to 12.
   -> If problem still persists, I would have to do some thinking.
If problem is gone, then add the variable again. Check.
   -> If problem is back, then the variable "is sick". Only quick thing to do, is to build an identical variable and use that one.
If problem also happens with the new variable, then it's time to share this experience with someone else and consider raising an OSS.
Good luck!
Jacob
P.S: what fisc year variant are you using?
Edited by: Jacob Jansen on Jan 25, 2010 8:36 PM

Issue while using SUNOPSIS MEMORY ENGINE (High Priority)

Hi Gurus,
While using SUNOPSIS MEMORY ENGINE to generate a .csv file using the database table as a source it is throwing an error in the operator like.
ODI-1228: Task SrcSet0 (Loading) fails on the target SUNOPSIS ENGINE connection SUNOPSIS MEMORY ENGINE.
Caused By: java.sql.SQLException: unknown token
(LKM used : LKM Sql to Sql.
IKM used : IKM Sql to File Append.)
can you please help me regarding this ASAP as it has became the show stopper for me to proceed further.
Any Help will be greatly Appreciable.
Many Thanks,
Pavan
Edited by: Pavan. on Jul 11, 2012 10:22 AM

Hi All,
The Issue got resolved successfully.
The solution is
we need to change the E$_,I$_,J$_,...... to E_,I_,J_,.... ((i.e; removing the '$' Symbol)) in the PHYSICAL SCHEMA of SUNOPSIS MEMORY ENGINE as per the information given below.
When running interfaces and using a XML or Complex File schema as the staging area, the "Unknown Token" error appears. This error is caused by the updated HSQL version (2.0). This new version of HSQL requires that table names containing a dollar sign ($) are surrounded by quotes. Temporary tables (Loading, Integration, and so forth) that are created by the Knowledge Modules do not meet this requirement on Complex Files and HSQL technologies.
As a workaround, edit the Physical Schema definitions to remove the dollar sign ($) from all the Work Tables Prefixes. Existing scenarios must be regenerated with these new settings.
It worked fine for me.
Thanks ,
Pavan Kumar

Issue while using SUBPARTITION clause in the MERGE statement in PLSQL Code

Hello All,
I am using the below code to update specific sub-partition data using oracle merge statements.
I am getting the sub-partition name and passing this as a string to the sub-partition clause.
The Merge statement is failing stating that the specified sub-partition does not exist. But the sub-partition do exists for the table.
We are using Oracle 11gr2 database.
Below is the code which I am using to populate the data.
declare
ln_min_batchkey PLS_INTEGER;
ln_max_batchkey PLS_INTEGER;
lv_partition_name VARCHAR2 (32767);
lv_subpartition_name VARCHAR2 (32767);
begin
FOR m1 IN ( SELECT (year_val + 1) AS year_val, year_val AS orig_year_val
FROM ( SELECT DISTINCT
TO_CHAR (batch_create_dt, 'YYYY') year_val
FROM stores_comm_mob_sub_temp
ORDER BY 1)
ORDER BY year_val)
LOOP
lv_partition_name :=
scmsa_handset_mobility_data_build.fn_get_partition_name (
p_table_name => 'STORES_COMM_MOB_SUB_INFO',
p_search_string => m1.year_val);
FOR m2
IN (SELECT DISTINCT
'M' || TO_CHAR (batch_create_dt, 'MM') AS month_val
FROM stores_comm_mob_sub_temp
WHERE TO_CHAR (batch_create_dt, 'YYYY') = m1.orig_year_val)
LOOP
lv_subpartition_name :=
scmsa_handset_mobility_data_build.fn_get_subpartition_name (
p_table_name => 'STORES_COMM_MOB_SUB_INFO',
p_partition_name => lv_partition_name,
p_search_string => m2.month_val);
                    DBMS_OUTPUT.PUT_LINE('The lv_subpartition_name => '||lv_subpartition_name||' and lv_partition_name=> '||lv_partition_name);
IF lv_subpartition_name IS NULL
THEN
                         DBMS_OUTPUT.PUT_LINE('INSIDE IF => '||m2.month_val);
INSERT INTO STORES_COMM_MOB_SUB_INFO T1 (
t1.ntlogin,
t1.first_name,
t1.last_name,
t1.job_title,
t1.store_id,
t1.batch_create_dt)
SELECT t2.ntlogin,
t2.first_name,
t2.last_name,
t2.job_title,
t2.store_id,
t2.batch_create_dt
FROM stores_comm_mob_sub_temp t2
WHERE TO_CHAR (batch_create_dt, 'YYYY') = m1.orig_year_val
AND 'M' || TO_CHAR (batch_create_dt, 'MM') =
m2.month_val;
ELSIF lv_subpartition_name IS NOT NULL
THEN
                    DBMS_OUTPUT.PUT_LINE('INSIDE ELSIF => '||m2.month_val);
MERGE INTO (SELECT *
FROM stores_comm_mob_sub_info
SUBPARTITION (lv_subpartition_name)) T1 --> Issue Here
USING (SELECT *
FROM stores_comm_mob_sub_temp
WHERE TO_CHAR (batch_create_dt, 'YYYY') =
m1.orig_year_val
AND 'M' || TO_CHAR (batch_create_dt, 'MM') =
m2.month_val) T2
ON (T1.store_id = T2.store_id
AND T1.ntlogin = T2.ntlogin)
WHEN MATCHED
THEN
UPDATE SET
t1.postpaid_totalqty =
(NVL (t1.postpaid_totalqty, 0)
+ NVL (t2.postpaid_totalqty, 0)),
t1.sales_transaction_dt =
GREATEST (
NVL (t1.sales_transaction_dt,
t2.sales_transaction_dt),
NVL (t2.sales_transaction_dt,
t1.sales_transaction_dt)),
t1.batch_create_dt =
GREATEST (
NVL (t1.batch_create_dt, t2.batch_create_dt),
NVL (t2.batch_create_dt, t1.batch_create_dt))
WHEN NOT MATCHED
THEN
INSERT (t1.ntlogin,
t1.first_name,
t1.last_name,
t1.job_title,
t1.store_id,
t1.batch_create_dt)
VALUES (t2.ntlogin,
t2.first_name,
t2.last_name,
t2.job_title,
t2.store_id,
t2.batch_create_dt);
END IF;
END LOOP;
END LOOP;
COMMIT;
end;
Much appreciate your inputs here.
Thanks,
MK.
(SORRY TO POST THE SAME QUESTION TWICE).
Edited by: Maddy on May 23, 2013 10:20 PM

Duplicate question

Any issues with using LDAP on LINUX for GRC 5.2 UME?

Our company is converting our LDAP servers from AIX to LINUX. The DNS name used in our UME connection should not change. Are there any issues with using LDAP on LINUX? We are currently on GRC 5.2 SP9 (in the middle of upgrading to SP12).
Also, I have been trying to connect our test UME system to a test LDAP box that has already been converted to LINUX but keep getting a 'connection failed' error when I try to test it.
Do you have to reboot the server to test changing the LDAP connections? I've been trying it by going into UME, pulling up the LDAP tab, hitting the Modify button, entering the new userid and password for test LDAP, and hitting the Test Connection button. I've verified that this userid and password is correct for test LDAP.
Is there a way to get more information about why the connection failed?
Thanks.

I've been told by our LDAP Support group that none of the other configuration settings should have to be changed. I should only have to change the id and password to connect to a test version of LDAP instead of our regular connection to the production LDAP.
Can you test a connection for a different userid/password without having to reboot/restart the server? Do I need to change these two settings, save then, reboot/restart, and then do the Test Connection button?
Thanks.

Authorization issue while using business content objects

Hi all,
I am getting an authorization error while loading from DSO to Cube (for standard business content objects only). Even i am not able access the data in Bex reports from Standard cubes or DSO.
The user is assigned to SAP_ALL .
But there is no such issue while accessing user defined DSO or cubes.
any solutions will be helpful.
Regards,
Varma

Hi,
Have you seen the error thru the SU53 t-code ? There you should see what is the missing authorization with the user.
Regards, Federico

Issues of using same enhancement set for different components

Hi experts,
I have an issue when using the same enhancement set(ZCRM_EHSET) for two different components IUICMD & IUICMRD. Component IUICMRD has two views IUICMRD/MainVS & IUICMRD/MeterReading and these views have been copied to Component IUICMD.
Now, i am getting the following error, when i try to access AccountSearch view of component IUICMD
Context initialization failed in view IUICMRD/MeterReading of UI Component IUICMD
An exception has occurredException Class CX_SY_MOVE_CAST_ERROR - Source type \CLASS=CL_IUICMD_BSPWDCOMPONENT_IMPL is not compatible, for the purposes of assignment, with target type \CLASS=CL_IUICMRD_BSPWDCOMPONENT_IMPL
Method: CL_IUICMRD_METERREADING_IMPL=>DO_INIT_CONTEXT
Source Text Row: 10
Let me know how i can solve this. Is there any precautions that i should have taken before using the same enhancement view for two different components.
Thanks in advance.......................
Regards,
Prabahar

Hi Bharathy,
Thank you for the reply which helped me to come close to the solution.
I hope you reply will solve the second part of my question where i get MOVE_CAST_ERROR.
My first Question is still unanswered and i request you to provide solution if you have any. I worked on CRM 4.0 and CRM 2007 is new to me.
My first question is below.
I have two components IUICMD & IUICMRD. I have enhanced 4 views in the first component IUICMD using enhancement set ZCRM_ENHSET. There is no problem with that. But when i try to use the same enhancement set ZCRM_ENHSET for enhancing the second component IUICMRD, it's enhanceable in enhancement set. But 2 views IUICRMD/Meterreading & IUICMRD/MainVS is also copied to first component and available as enhanceable views in First component.
Is it the std behaviour that views from one component is copied to other when you try to use the same enhancement set? Kindly let me know if you faced similar situation.
Best regards,
Prabahar

Different pixel sizes while using Sigma 8mm fisheye for Pano photos

I have been using a Canon T4i for a few months now to take panoramic shots of apartments. I use a Sigma 8mm fisheye lens on a Nodal Ninja Ultimate R10 head.
I have the camera set to 16:9 aspect ration with 3456x5184 resolution (Not the highest "L" setting but the next highest "L" setting).
I've noticed that when I look at the dimensions on the images, sometimes they are at 2912x5184 and other times it is 3456x5184.
During a shoot I do not change any settings on the camera other than white balance. I do shut off the camera and have to re-enable "Exposure Comp / AEB Setting" but that is all I am changing.
Can anyone tell me why I am seeing images with different widths?

The very important thing is not just the lens and resolution but please tell me what software perhaps you are using in post? Do you tripod mount your camera and sometimes it looks as if it is 4x3? Please describe to me as best you can what settings are you shooting in landscape? Are you using any custom functions and I knew these may seem irrelevant but if you are I was wondering if you are the only user of the camera and if there was another photographer in involved? Did someone mess with your camera's firmWare Note please do not admit to this here aka Magic Lantern or other possible hacks? PM me or if you have registered your product to your account I have strong feelings this is what people do with other people's cameras because well it is not there own and they are vindictive at times. I apologize for my endless speculation please let me know if you can provide the exact camera settings and any questionable things that may be afoot ;(.

How I claim my video to use my Adobe softwares for commercial use on Youtube?

Hi,
I would like make video tutorial on Youtube and I am enable for add advertising on my video with adsense. Basically, I need claim my video and say YouTube I can use my software for commercial use in my video. I need this help because Youtube is very strict for add advertising.
My question is what do I have to write for my video to claim I can use my softwares (Creative Suite Production PremiumCS5.5) in my video for a tutorial?
Here is the picture when I need claim my video on YouTube.
Thanks you

You are being asked if you have the rights to the content you are publishing. That is all.
If you are using Copywrite content it is not allowed unless you have the rights or a license to use it. For instance if you create music for the background is it your music, or someone elses? If it is someone else's, you cannot use it unless you have the right or license too do so. Your images are they open source or did you create them? Or did you rip them from the net? IF the latter you cannnot use.... Does not matter if you are using pirated, or stolen software (although frowned upon, and NOT recommned) to create your content
Hope that was clear.

Safety issues while using Sleepless & other software for iOS 10.7.4

Similar Messages

Maybe you are looking for