Safety Stock history

I want safety stock changed date and user id from which it has been changed..

Hi mate,
U can have the changes done to the safety stock along with the user in t.code: MM04 (display changes done to the matl. master) for that particular material.

Similar Messages

Safety stock and safety period

Can anybody help me in understanding the effect of safety period in MRP..
CAn anybody give me an explanation with numbers so that i could test and understand..
Please help me out..

Dear
There are plenty of earlier posting on Safety stock and safety periods .
Safety Stock : This is one kind of Un-restricted stock which will be used to full fill the un-expected damand for any material apart from the normal stock .Safety Stock calcuation depends on requireiment .It can be pre-defined ( manual safety stock -MRP3 view-Safety Stock ) or Automatic Safety Stock based on the MRP Type set up in OMDQ.If you want automatic safety stock , then it will calcuated based on Forecasting view parametrs , forcast model , MAD, BASIC value calcualted wheil excuting Forecasting collectively or individually .
Safety Stock Calcualtion happend based on following CONDITION :
1.MRP type should be Forecast Base MRP -VV,VB,VS,V1,V2.Here MRP type calculates the Automatic Safety stock based on the Forcasting View Maintained in MM02 with proper Consumption History .( 261,501 etc update control in MMR through OMJJ set up --Please check MMR Forcasting View -Cosnumption Histry at least 6 months are there or not ?)
2.In MRP Type -SPRO-MRP-Check MRP Type -Select any one of the MRP Type like VV , you will find that Calcualtion of Reo-Order Point and Safety Stock Check Box Ticked .Based this set up and above Forcasting view , safety Stock will be calcualted with certain formaul .Here in the Material Master MRP3 view u need to maintain Service Level Percentage of that Material whcih will be consideredr as Service level factor to calcvualte the Safety Stock automatically based on the MAD and Basic Values calcualtion in Forcating View Individually (MM02) or collectively in MP38 .
Hope this above facts will help you to understand the calcualtrion of Safety Stock .
Formula : Safety Stock = R x Sq.rt. W x MAD
Safety Stock = R x W x MAD
Refer our earlier posting on the similar issues :
Automatic reorder point calculation
safety stock and min safety stock
Hope it clarifies
Regards
JH
Edited by: Jiaul Haque on Feb 21, 2011 10:31 AM

Safety stock data update in APO product master

Hi Gurus
I have an active IM for a product . when i change the safety stock in R/3 , the same is not getting updated in APO. The method maintianed is SB
Please suggest

Finally i need to apply the below code in Exit EXIT_SAPLCMAT_001
INCLUDE ZXCIFU01 *
IF CT_CIF_MATLOC IS REQUESTED.
if no saftystock-method is explicitly set
use method 'SM' if safty stock & time is transfered
use method 'SB' if only safty stock is transfered
use method 'SZ' if only safty time is transfered
LOOP AT CT_CIF_MATLOC.
LOOP AT CT_CIF_MATLOCX WHERE MATNR = CT_CIF_MATLOC-MATNR AND
LOCNO = CT_CIF_MATLOC-LOCNO.
CT_CIF_MATLOCX-MSDPSBMETH = 'X'.
*APO und R/3: Safety stock
IF CT_CIF_MATLOCX-SAFTY = 'X' AND
NOT CT_CIF_MATLOC-SAFTY IS INITIAL.
*APO: Safety days' supply R/3: Safety time/act.cov.
IF CT_CIF_MATLOCX-SVTTY = 'X' AND
NOT CT_CIF_MATLOC-SVTTY IS INITIAL.
*Maximum of stock und safety time
CT_CIF_MATLOC-MSDPSBMETH = 'SM'."Maximum
ELSE.
*Safety Stock
CT_CIF_MATLOC-MSDPSBMETH = 'SB'.
ENDIF.
ELSE.
IF CT_CIF_MATLOCX-SVTTY = 'X' AND
NOT CT_CIF_MATLOC-SVTTY IS INITIAL.
*Safety days' supply
CT_CIF_MATLOC-MSDPSBMETH = 'SZ'.
ENDIF.
ENDIF.
MODIFY CT_CIF_MATLOC.
MODIFY CT_CIF_MATLOCX.
ENDLOOP.
ENDLOOP.
ENDIF.
Thanks all for the input

Report for Reorder point, safety stock, current stock and fixed lot size

Hi,
Purchasing Dept. is looking for a report which can give list of materials falling below the reorder point, so that they can go ahead and create procurement proposals for those materials.
They also want to see the Reorder Point, Safety Stock, current stock and fixed lot size in the same report.
Let me know if there ia any standard report availbale which displays the same or any approach to get the same.
Thanks in Advance.
Regards,
Shankar Goud.

Hi,
There is no standard report because this is meant to be managed by the MRP run.
The MRP lists show all materials that have a problem (such as stock below reorderpoint) but MRP generates requirements for these anyway and so all you need to do is to look for the MRP generated requirements (requisitions?) and you have your list?
Are you using MRP?
If so then please use the standard functions in MRP to get this.
If not, then WHY NOT?
Steve B

Report on current stock and safety stock

Hi,
I want to have the report on current stock and safety stock.
In MC.9 it gives wrong safety stock. When I go to cross check the safety stock in material master & in MC.9 I see differences.
Thanks,
Kiran

You can user tcode MC.9 or MC.5 to know valuated stock available at given plant. Stock lying in Returns (MB52) will not be a part of this report as it non-valuated stock.
The stock in the accounting view of the material master considers stock at plant level including stock in Transit (Intra & Inter plant stock trasnfers) & special stock like stock issued to vendor , consigment stock etc which is valuated at plant level.
whereas and stock in the plant stock view of the material master does not consider such special stocks hence there will always difference in both veiws.
For Physical stock as on particular date you can consider MB5B report with radio button "Storage location/Batch Stock" wherein you will get Quantity issued & Qunatity received in those SLOC along with Opening stock & Closing stock for the specified period.
use tcode
MBLB to know stock at vendor.
MB54 - Consignment Stock.

Safety stock not covered by schedule lines in planning run

Hi !
In our organization we are trying to implement scheduling agreements and automatic creation of delivery schedule lines through MRP. We have MRP type PD and it considers the reservations created by PM orders and Production orders as requirement elements. When I do the planning run, it creates schedule lines for the PM order reservations and purchase requisition for safety stock. I need it to create schedule lines for all scenarios. Kindly help and suggest a solution.
Regards,
Satya

Hi,
Please refer the below links.
Schedule Lines not getting created in MRP
Re: No Scheduling line is generated when RUN MRP
Hope it helps you.
Thanks.

Calculation of Safety Stock and Reorder Point under Forecast Model T

Hi Gurus!
Happy Holiday!
I would like to ask for your assistance on how the the safety stock and reorder point was calculated with the following values available. I would really appreciate it if you could give me details on the calculation.
Below are the values:
Basic data
Forecast date        01.12.2009        Unit                  CTN
Forecast model       T                 Service level         0.0
Period indicator     M                 Paramtr profile
Control data
Initialization                                Tracking limit        4.000
Model selection      A                 Procedure selection   2
Parameter optimizatio                Optimization level    F
Alpha factor         0,10               Beta factor           0,10
Gamma factor       0,00              Delta factor          0,30
Basic value           5.464-           Trend value          5.603-
MAD                      4.758            Error total              4.722
Safety stock         1                   Reorder pnt.          1
No. of values
Consumption           6                Forecast periods       1
Initial. periods      0                Fixed periods          0
Periods per season   12
Historical data
Period                Original     Corrected value
11.2009                3.000              3.000
10.2009                0.000              0.000
09.2009                0.000              0.000
08.2009                9.000              9.000
07.2009               21.000             21.000
06.2009               20.300             20.300
Forecast results
Period                Original     Corrected value
12.2009                0.000              0.000
Appreciate your assistance!
Thank you and Happy Holidays!
Ji

Sweth, you are asking for consulting, and in my opinion it is way beyond what can or should be reasonable to achieve in such a forum. You are asking complex questions, that most probable have more than one possible answer.
I suggest that you get on-site help from a knowledgeable and experienced consultant. These are crucial business issues, and should be dealt seriously.

Safety stock and Reorder point calculation in inventory planning

Hi,
How System does the calculation of own safety stock, and Reorder point, maximum safety stock level at parent and child location while running inventory planning services in SAP APO SPP. does anyone about the calculation please let me know
Regards
Puneet

Hi,
How System does the calculation of own safety stock, and Reorder point, maximum safety stock level at parent and child location while running inventory planning services in SAP APO SPP. does anyone about the calculation please let me know
Regards
Puneet

Safety Stock T-code

Dear Experts,
What is the T-code for viewing all the safety stock which are maintained for all materials.
Regards,
Phalgun Patel

Hi,
Execute t-code se16, then enter MARC table and press enter. Enter list of materials or plants or this can be run without any selection parameter.
Execute it and look for field EISBE (Safety stock).
Regards,
Gaurav

No planning file entry for safety stock

hello!
i do not have a planning file entry for safety stock. my material has required safety stock and no quantity on plant stock. therefore MD01 should create a purchase requisition - but is does not. i do not have an entry in the planning file as well.
any ideas what could be the reason?
thanks!
matthias

Hi,
- First of all check whether MRP is activated or not for Perticuller Plant.T.code is OMDU.
- Which MRP type is maintained for that material?
- In rare cases (Materials uploaded by LSMW using Badi) it is observed that system miss to make the entry in Planing File.So better will be set a Back Ground job to activate Planing file OMD0 or make manual entry using T.code MD20.
Regards,
Dhaval

Dynamic update of safety stock in SAP R/3 systems (ECC 5.0 version)

Hi Friends,
Forgive my newness to SAP. Let me explain the problem i am facing in SAP. I want to identify the parameters to dynamically update the finished goods safety stock for each depot by SKU wise.
Current process :- Safety stock is calculated manually and updated by using Transaction code MS02 in the system.
It would be highly useful if i know the flow in SAP system and how the current process can be changed?
If more info is required i'm ready to give.
Thanks in advance

Hi Mario Adler,
Thanks a ton for ur answer.
Will it update safety stock for finished goods in each depot by SKU wise? Raw material safety stock isn't my concern.
project description : Manufacturer of chemical goods , 70+ products,350 skus
Distribution : factory to depot (bulk volume)
Mother go-down to depot(Stock transfer)
No of depots :33,factory:3,mother go-down -1
Sales forecasting is done in excel for every month and updated to SAP via BAPI. After that DRP,MRP and other runs takes place.
What are all the areas i need to touch in to get the parameters to update the safety stock?
Regards
Arasu
Edited by: Arasu_IIM on Apr 26, 2011 12:52 PM

MRP with Safety Stock

Hi All,
I am working on a trading Company. I have one scenario for Make to Stock, whenever the MRP will run it should consider the safety stock and the MRP should be run through the reorder Point. As i do not have much idea about the MRP, so please guide me on this. Please give me step by step Procedure to do this. What MRP type,shall i choose while creating the material master and which lot size? Its will be better if you clarify with an example.
Sure,Points will be awarded.
Thanks in advance.

Hi Dharama,
I have run the MRP same as the example given by you for Lot size HB and MRP type VB as--
Ex. Stock 50
Reorder point 60
safety stock 30
MAx stock level 100
When MRp run system create P.R for 50 no's.
I understood the first two line items as we have the safety stock as 30, so it will be reduced from the avalaiable quantity 50. It will become as 20.
But after that, how the system is calculating on the reorder level and the maximum stock level. Please clarify me on this.
Thanks in advance
Sure, Points will be awarded.
Edited by: Neeraj Saini on Oct 23, 2008 7:53 AM

MRP - project stock - safety stock

Hello,
My MRP plans on a project stock.
When I try to fill in the field "safety stock" in material master data MRP plans the safety amount on unrestricted use stock. I would like it to be planned on a specified project.
Do you know how to do it?
Best regards
Piotr

Hi,
procurement for safety stcok will always happen wo ac assignment. So you may have look for use of some other parameters like lot sizing or minimum lot size fields etc.
Regards
Vineet

In Material master safety stock field is in display

Hi,
As a consultant i am able to change the Safety stock field in MRP view in the test system and Production also,but for the user this particular field is in display mode wheras other field in the MRP view user is able to change.
Kindly help me if,there is any settings for the same.
Regards,
Prashant

Hi Prashant,
Have you checked if there is any configuration made to lock same fields on material master? Follow the below path please;
Logistics u2013 General ==> Material Master ==> Field Selection ==> Define Lock-Relevant Fields
May be someone defined some fields as u201Clock-relevantu201D in customizing and during creation or changing of material master he/she set this indicator. You are able to change those fields because you may have SAP_ALL authorization whereas others may not.
Best regards

Safety Stock Issue

Hello Gurus,
We are in SCM 4.0 and currently we are facing an issue in safety stock calculation.
We run a macro to calculate the safety stock. The safety stock for a particular bucket is calculated by the sum of total demand of next consecutive 4 buckets. The problem is that the macro works fine if we select a single product-location combination but when we select a product at multiple locations combination (aggregated level) the macro doesnt work. The value is not displayed in the planning book. However, we could see the total demand value for that particular bucket.
Hope I am clear and please help me on this.
Thanks,
Sai

Hello all,
I have a quick question:
Do we need to maintain the data at Location-Product Group level to go for Aggregated Safety Stock Planning?
Let me explain my case:
We have the following selections at Location-Product level:
Sel1: Prod1 at Loc1
Sel2: Prod1 at Loc2
Sel3: Prod1 at Loc3
When I make either of these selections individully in the Planning book the safety stock macro works fine but if I make any of these two selections or all the three selections at a time, then the values does not show up at the Total but I can see the values at 'Details' level if I select Location at the Header Information.
We are thinking of Aggregated Safety Stock Planning and We do not mainatain the data at Group level. Can we still go for Aggregated Safety Stock Planning?
Could anyone give me some suggestions on this?
Thanks
Sai

Safety Stock history

Similar Messages

Maybe you are looking for