Sagem f@st 800 and leopard problem solved!

Hi to every leopard users! : )
i finally solved the black screen caused by sagem f@st 800 usb modem!
first of all get the lastest drivers here:
http://lgsagem.free.fr/drivers_fast800.htm
then just follow these steps:
before installing drivers keep network in the pref panel opened with preferences saved.
1-before connecting the usb open network in pref-panel
2-click on your connection (mine is ppoe service but i renamed it)
3-save preferences (lock the padlock)
4-after saving preferences connect the usb to your mac!
i don' t know why everytime a turn on my mac the preferences are not saved i mean the padlock is open..well i finally understand that before connecting the usb i have to lock the padlock (everytime i find it open) and after doing this the usb works fine!!
also connecting and disconnecting it several times!
I really hope it works for you too! bye bye!

well it started giving me problem again...i really don' t know what could it be... so tomorrow i'll change the modem..that's the real solution...
Message was edited by: Elen4

Similar Messages

  • Adobe Photoshop CS3 and Leopard problem changing number values in the tools

    I know that Adobe has mentioned on their site that this is a known problem and that the fix is going to come from a Leopard update. I have not seen anything on this problem from the Mac side so I am wondering when a fix can likely be expected. The Adobe link is http://www.adobe.com/support/pdfs/PhotoshopCS3_LeopardIssue.pdf
    Any clue?

    Welcome to the Apple Discussions!
    This is a user-to-user forum, so no one here works for Apple. None of us have any idea what they have running behind the scenes. I'm afraid you're just going to have to wait and see like the rest of us. It's against the Terms of Use of the Apple Discussions to speculate about unannounced or unreleased products, but the Macworld Expo starts in San Francisco in a little more than two weeks. In the past, Apple has released software updates at the same time as the expo to support new software and hardware. No one here can speculate if this will include the update you're looking for, however.
    -Doug

  • Mail and Leopard problem?

    Mail is not shutting down properly since upgrading to Leopard... I know others have this problem but I have not seen a credible way of resolving. Any ideas while the Jobs team is hopefully (!!) trying to resolve? Thanks, Floor.
    (while quitting Mail, window dissapears but Mail menu bars stays up and Mail is still active... need to use Force Quit to get it to go away).

    This forum is dedicated to the productivity application, AppleWorks. It is not a "catch-all" for how Apple computers work. For you I suggest the Mac OS X v10.5 Leopard > Mail and Address Book forum.

  • GDM and OpenBox - Wallpaper and background problem [SOLVED]

    I have a strange problem.
    I am using GDM as login manager. And I am using OpenBox as a window manager.
    As soon as GDM appears on the screen, my wifi connection is connected... so its good.
    But, when I login Feh loads my background picture and it disappears after few seconds..... I solved this modifying the autostart script (adding the sleep).
    Now background stays, BUT not always. Sometimes it disappears.... sometimes not.
    It seams that this problem is appearing randomly.
    So my question is:
    Is there a way to disable Gnomes (GDMs) background color and picture after loading openbox through GDM?
    Last edited by webmasteryoda (2011-06-26 10:50:10)

    azleifel wrote:
    It will apply to gnome as well, so if gnome-settings-daemon is your problem then you either need to choose one environment or perhaps do some settings adjustment with gconftool-2 when you log into each environment.  I didn't try this but settings for openbox could be changed with a couple of gconftool-2 lines in autostart.sh, e.g.
    gconftool-2 --set --type bool /desktop/gnome/background/draw_background "false" &
    and settings for gnome could be changed from a DE-specific ("OnlyShowIn=GNOME") .desktop file or two in $HOME/.config/autostart.
    I tried this, but it didnt work. Its a Gnome 3.
    I dont understand second part of your post... ("OnlyShowIn=GNOME")

  • Powerbook G4 and Leopard Problems

    I've had Leopard for over a month on my Powerbook G4. I went so far as to make a post here saying how smoothly the install went and that all was well. I spoke too soon. Yes, I rather like many things about Leopard and most things work. But little problems keep cropping up. I would guess that Apple did MUCH more testing with newer Intel machines before releasing Leopard, and much less with legacy machines like mine. Makes sense to put their resources where their new computers are.
    Just tonight I found that iDVD does not work. It appears to load and I can create a new project, but nothing works beyond that.
    Final Cut Pro works in almost all ways, thankfully, but Log and Capture will not work with HDV devices. Works fine with DV.
    Leopard is very erratic about recognizing older Windows computers on my small office network. Does work perfectly with other Macs on 10.4 or later.
    Before installing Leopard, I did backup all my data, of course. Should have done a mirror image so I could have gone back to very stable 10.3.9, but I did not. Going back is intimidating, especially since I cannot seem to find many of the old updater downloads on the Apple website now.
    Are others having problems with Leopard on G4 machines?

    Thomas,
    I installed Leopard on my PowerBookG4 about a month ago. So far, so good.
    All of my Adobe apps work fine; Office 2004 works just fine; mail is ok. For a while, I thought the chronic Airport problems had gone away but I still have to work with some of my network express units from time to time. (Unplug & replug="work with"...then they reestablish their respective connections). Dropouts with iTunes (AirTunes) have not happened with Airport under Leopard. This is huge!
    My printer drivers acted up at first but seemed to have mysteriously worked out the 'bugs' on their own.
    If I had to criticize Leopard at all, I would say the only real disappointment so far is with repairing permissions. It takes far longer than it should. Finder is not as snappy as it was in Tiger...connecting to the .Mac servers is a little slow. (iDisk)
    But all in all, I really like the new OS. I rebooted a few times to my Tiger clone (Thank you *_a brody_* for all your advice on cloning drives) when I had some issues with the printer drivers, but those issues are now gone.
    iDVD works ok for me as well.
    Stick with it...Leopard is good stuff!
    -Mark

  • W540 + Dock station (40A20170EU), Audio and HDMI problems - SOLVED

    Hello,
    I have recently bought your dock station (40A20170EU) and as soon as I started using it the problems began:
     - Audio jack on the dock is not working and is emitting static.
     - As soon as I connect a display via HDMI port (on the dock station) my laptop display starts flickering (the display was tested on the PC and works).
    I have updated the dock firmware to 2.21.000, nothing changed. 
    PS. The second monitor running from the docking stations display port is working fine. 
    I need your help! 
    Thank you!

    SOLVED.
    1) Removed all display drivers.
    2) In BIOS I changed the display setting from standard to advanced.
    3) Reinstalled all the display drivers.
    4) Reconnect the HDMI monitor and now it’s working.
    5) WINNING J
    Thanks anyway.

  • NOAA and Gmail problem solved after one small change - coincidence?

    I have a late 2009 iMac with a 3.06 GHz Intel Core 2 Duo processor and 4GB of memory, and I am running OS X 10.9.4 with all software updates.
    I have had continual problems with Apple Mail reliably loading my new Gmail for months.  I have combed these communities and the web in general for advice and fixes, and I've tried a lot of them.  The problem always recurred.  I had to quit Mail and restart the application to load new Gmail emails to my Inbox countless times every day.  If I didn't find everything else about Mail so perfect for all my needs, I'd have quit using it.
    Recently, I started having problems getting to NOAA's weather forecasting website as well as the NHC (National Hurricane Center).  I started looking around to see if others were experiencing this problem, and I did see I was not alone.  Someone suggested this fix:  System Preferences/Network/Advanced/DNS and entering 8.8.8.8 as my server.  It worked like a charm, and NOAA and the NHC now come up quickly and reliably as they always had in the past.
    Oddly, I have had ZERO problems with Gmail since I did this.  None.  It's working perfectly for the first time in months.  I've checked updates to software and see no changes to explain this.  The only change that took place immediately before Apple Mail started loading Gmail reliably was the DNS change.
    I know just enough about computers to understand that I know nothing about computers.  So I'm throwing this question out there to people who do have some understanding of these things:  Is there any connection between what I did to fix my access to the NOAA sites and the fact that my Apple Mail is finally working properly?  Or is it just some freak coincidence?

    It has solved my problem untill hal has been updated now i am back to the same problem
    eth1 -> 00:0e:35:75:95:f2
    eth0 -> 00:c0:9f:59:04:00
    [wael@nasreddine ~]$ tail /etc/udev/rules.d/udev.rules
    ##### Hotplug rules - end
    # debugging monitor
    RUN+="socket:/org/kernel/udev/monitor"
    KERNEL="eth*", SYSFS{address}=="00:0e:35:75:95:f2", NAME="eth1"
    KERNEL="eth*", SYSFS{address}=="00:c0:9f:59:04:00", NAME="eth0"

  • Oracle Cluster and libnnz10 problem - SOLVED!

    Hi to all
    I have some machines (XServe) with OSX 10.4.9 and Oracle 10.1.0.3.
    In all the machines I follow the instructions find in this forum (the relink libnnz10.dylib trick) and all the databases runs very well.
    Now I'm trying to instal two machines in cluster mode.
    The node 1 is a clean machine. The node 2 is a machine that has a Oracle single instance running.
    All the installation in cluster mode runs smooth and I made the same things that in a single instance (like the relink trick).
    With all installed, the CRS daemon is running and the listeners is running (I run NETCA before runnig DBCA).
    Using the DBCA works fine until the last step - for the database creation, the last script has a shutdown/startup command to run a full recompile of all packages and procedures in the database.
    At this moment the installation fails (with end-of-communication channel). Looking in the logs, this is the _dyld libnnz10.dylib error.
    Even after the crash in installation, I quit the DBCA and runs SQLPLUS. I connect in the database, try a startup (that fails with the error mentioned), reconnect again and make two commands : alter database mount; alter database open; (and it works).
    I do this in the two nodes and the CRS daemon recognizes the running instances (with crs_stat -t I can see all online) and the database is running and in cluster (what I do in one instance appears in the other and the datafiles are the same), including failover tasks (like simulating a node down - the database still running).
    But all tries to run the startup/shutdown commands fails. It fails always when the LMON processes try to start.
    I recheck the installation, focusing in the relink trick with the libnnz10. When I use DBCA to install a single instance on node 1 or node 2 in the same ORACLE_HOME of the cluster, it runs fine (including startup/shutdown) - this make me think that all the database relink's are fine.
    I try to relink the cluster. In installation it uses 4 makes and I redo this makes without the libnnz10. The makes runs well too, but the error continues (only using startup/shutdown in cluster database).
    I'm doing the documentation of the process and will post it, but I want to resolve this issue.
    Any ideas ?
    Thanks to all
    Message was edited by:
    alliance01

    Hi to all.
    I downloaded the 10.1.0.5 as soon I can - thanks to damjanp!
    After the download, I follow all the instructions.
    I stop the database, all the services and the cluster. Run the installer and it works fine.
    When I try to make the post-installation tasks, I cannot startup the database (nor with the error that I was having). I received a Oracle Cluster Configuration Error...
    I read all the logs and find 3 errors. I do not know if this occurs because of wrong environment variables.
    The commands awk, touch and basename fails - the scripts try to find this commands in /bin (this commands in OSX stay in /usr/bin). I prefer make a link (ln -s) using root :
    ln -s /usr/bin/awk /bin/awk
    ln -s /usr/bin/touch /bin/touch
    ln -s /usr/bin/basename /bin/basename
    When I done this, the cluster starts (ocssd.bin, crsd.bin e evmd.bin). But when I try to start the database, it fails (ORA-29702 : error occurred in Cluster Group Service operation) and srvctl gives me PRKH-1010 : Unable to communicate with CRS services. [OCR Error(Native : prsr_initCLSS:[21])].
    To resolve this I use localconfig (user root) :
    localconfig reset /<ORACLE_HOME>
    After this, I shutdown all and restart the CRS services - and for my surprise the CRS automaticaly starts all the services (including the instances).
    And the libnnz10 problema was gone!
    I read the documentation and found that the "TNS - lost contact" problem in Tiger (yeah - Tiger) was resolved.
    I think that 10.1.0.5 can runs on Tiger more easily.
    The cluster are running fine now - I shutdown/startup the instance several times to test with no errors.
    I will prepare a documentation to post in the Web about this installation. When I finish I post in this forum the link.
    Thank's to all.

  • Mega PC 180 Remote (HiFi Mode) and Eject problem SOLVED

    Hi everyone,
    I just bought the MSI DR8-A DVD Writer.........   and Gues what..??!!??
    - Now i don`t have any problems anymore with the Remote in HIFI mode (strange)
    - Also the new drive will eject as it supose to ........
    I am a very happy man now.
    I am all set up, and my Home Media Center is complete Now.
    Don`t understand some of you guys still having problems....
    Remember: the Mega PC is not for NOOBS
    Greetings from the Netherlands,
    Defaulty
    MSI Mega PC 180
    AMD XP2400
    2x 256 mb (No label) PC3200
    80 Gig Maxtor
    MSI DR8-A DVD Writer
    MSI TV@nywhere Master
    MS Windows XP (SP1)

    Quote
    Originally posted by sav_
    nopz.
    I even wiped the entire copper layer of the cooler with polish, added Artic Silver Ceramic and yet, 40° idle, 59° stressed...
    Note that the intake of the cpucooler gets blocked by the Radeon, so the reason is obvious  
    A pretty common trick used on Biostar SFFs (which are even smaller than the 180) is to add two Zalman 80 x 15 OP1 fans to the side panels.  Left panel toward the front and right panel toward the rear.  This gives a good cross ventilation flow and when you run the fans on the low voltage setting-----it is totally silent---so you haven't added any noise to the overall setup.
    Drops CPU temps 4-5 C.  Might work on the 180.  You can see an example of the side panel fans----as well as another possible solution, watercooling, here:----just scroll through all the pics to find the fan solution...SFF Fans and Watercooling
    Good Luck-----John

  • CS3 and Leopard problems.

    Just made the jump from 10.3.9 to 10.5.2. Problem is when I open old Illustrator 10 files in CS3 the page setup is comletely lost. I have to manually set it up in the print dialog box. I have tried many different print drivers for my HP, nothing works.
    Printing from Illustrator 10 works fine.
    Help please.
    Ulrich

    Just made the jump from 10.3.9 to 10.5.2. Problem is when I open old Illustrator 10 files in CS3 the page setup is comletely lost. I have to manually set it up in the print dialog box. I have tried many different print drivers for my HP, nothing works.
    Printing from Illustrator 10 works fine.
    Help please.
    Ulrich

  • Ettercap and ipw2200 problem [SOLVED]

    Hi, I used ettercap with wifi in monitor mode 5 months ago. I cant start ettercap with wifi today.
    Ettercap writes:
    FATAL ERROR: Inteface "wlan" not supported (802.11 plus BSD radio information header)
    My wifi card: Intel Corp.|Intel(R) PRO/Wireless 2200BG (ipw2200)
    Any suggestions.
    What does mean 802.11 plus BSD radio information header.
    Edit:
    I have installed wireshark. It works fine.
    Last edited by mezcal (2007-03-24 09:59:42)

    i'm running a T43 as well so here's what i did
    1) do a base install of arch
    2) download the ipw-2200 arch linux package on a computer that has the internet working and save it to a usb flash key or burn it to a cd or something.  or just plug in your ethernet on your laptop to a working internet hookup and download it with lynx.  don't get it from the developer's site, you need the arch .pkg. file.  here's the link:
    ftp://ftp.archlinux.org/extra/os/i686/i … pkg.tar.gz
    3) mount your usb key if you did it that way, as root do:
    # mkdir /mnt/flash
    # mount -t vfat /dev/sdb1 /mnt/flash
    change to the directory where you have the file:
    # cd /mnt/flash
    4) then do a
    # pacman -A ipw2200-fw-3.0-1.pkg.tar.gz
    5) do you have wireless_tools package installed? you need it for wireless to work.  do 
    pacman -Q wireless_tools
    , it should return the version if it's installed.  if not download and install it the same way:
    ftp://ftp.archlinux.org/0.7.2/os/i686/w … pkg.tar.gz
    6) install ifplugd:
    ftp://ftp.archlinux.org/extra/os/i686/i … pkg.tar.gz
    6) as root, edit /etc/rc.conf:
    in modules, add ieee80211, ieee80211_crypt, and ipw2200.
    check what your wireless adapter is named, it might be wlan0 or eth1 or eth0 depending, i've had it change.  do a
    iwconfig
    to see what has wireless extensions.  say it is eth1 then do:
    in networking section of /etc/rc.conf, make it like this:
    eth0="dhcp"
    eth1="dhcp"
    INTERFACES=(lo eth0 eth1)
    in DAEMONS section add @ifplugd, and @network.
    reboot your system, and you should see your wireless indicator light come on all by itself without you having to hit Fn+F5.  let me know how that works.

  • Tint and Trayer problem [SOLVED]

    Since tint has no systray, I'm running Trayer on top of it, but I was wondering if there is any way to fix the task size (so it wont go past the green line)? Or even another solution if there is any.
    Any help, appreciated.
    Thanks
    I'm sticking with <task> <clock> <trayer> option now. Thanks cinan
    Last edited by joqueza (2008-09-28 21:34:42)

    cinan wrote:you can set tint size in .config/tint/tintrc, there's "panel_size = x y" and then move trayer to corner
    Thanks for your input... but this way the clock will be on trayer's left, and thats not exactly what I want....
    Last edited by joqueza (2008-09-28 18:28:08)

  • I had this imac 27" two years ago,updated to snow leopard 10.6.8 and suddenly the imac shut down and able to start again from the beggining,i had the leopard 10.5.8 and my problem is i cannot re-installed my snow leopard.Do i have to update my old leopard

    I had this imac 27" two years back(leopard 10.5.8) and no problem was encountered so far! (thanks 4that),i always made an update as far to snow leopard 10.6.8. Unfortunately when i did some application /downloading,the system was off and when i turn it On the logo of an apple only came.So what i did is to start all over again,now i am two years old back with Leo-10.5.8,My problem is i cannot install my snow leopard,it reads that i have to clean tha disc which i did and thru utility disc.Any help please and i really appreciate to every1 helping me to solve the problem.I will keep in touch.
    Many thanks! - Angel

    BTW,I purchased the SL by retail and originally installed for the first time in my IMAC 27" ,unfortunately during the upgrading of the system,suddenly it was totally gray.then off as it killed my imac.i switch it On but only the apple logo came and waiting for so long.I tried to start from the very beginning,installed the DVD installation that was originally came from imac..it works and i have now the latest version of Leopard 10.5.6...then .8 thru updates. My problem is i cannot re-install my SNOW LEOPARD that i purchased from retail store..proceeded to install in my imac but everytime it ends with 'FAILED-pls clean the disc" i did the cleaning but still the same,:installed failed!-The installer could not copy the necessary support file",i tried booting from the disc holding C down but no luck at all. Anybody can help me please. Many thanks ..

  • I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

    Question
    I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
    '''(in English)'''

    Hi Danny,
    Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
    but not 180, right?
    I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
    =COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
    or
    =SUM(IIF(Fields!TICKET_STATUS=4,1,0))
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • I am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!

    i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
    When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
    Please HELP!!!!!! Getting second thoughts on Lion!!!!

    Hi b,
    Have you restarted yet?

Maybe you are looking for