SahrePoint Server -Upgrade Status Failed
Hi,
On our SharePoint server 2010, I noticed that there are 2 Failed upgrade. ( Central Admin > Upgrade Status)
Could you please let me know what are the steps to fix it?
Thanks,
Kate
Thanks Jason,
I'm new in the company and don't know the history of how the upgrade has been done.
The reason I'm researching is, there is a problem with synchronization with Active Directory and I think it maybe because of the upgrade issue!
I also found the Application Event Log error below.
Error ID 1004: The resource 'D:\SharePoint 2010\14.0\Service\Microsoft.ResourceManagement.Service.exe' does not exist.
This means, the Network Service account does not have rights to the %programfiles%\Microsoft Office Servers\14.0 folder so, the User Profile Synchronisation with
Active Directory does not run properly.
The solution is to grant read access to the Network Service account to the ...\14.0 folder.
https://support2.microsoft.com/kb/2473430?wa=wsignin1.0
But I cannot find %programfiles%\Microsoft Office Servers\14.0 folder. Instead
there is a folder in D drive: 'D:\SharePoint 2010\14.0 and I granted read access to the Network Service account to this folder and ran Full synchronization but still not a joy.
Could you please advise me?
Thanks
Similar Messages
-
Hi
I try to upgrade a Project Server 2010 environment to 2013. When I run
upgrade-spprojectwebinstance
it fails with:
Action 15.0.0.1 of Microsoft.Office.Project.Server.Upgrade.FullFarmDependentProjectDatabaseSequence failed
Anyone seen this error?
ThanksHi Xtenser
try to check the ULS log. There might be a hint, that there is a blocking job in the Project Server Queue. This can block the upgrade process.
Regards
Christoph
Christoph Muelder | Senior Consultant, MCTS, MCSE, MCT | SOLVIN information management GmbH, Germany -
What to do when SLS - Lion Server Upgrade & Migration Fail
Hi everyone,
I've had a tough time over the past week trying to updating my SLS to LS. (It was a slow week at the office so despite the warnings in these discussions I wasn't disturbing anyone, so I thought I'd try...) Both an upgrade to the current running system and a clean install on a wipe of that hard drive stall at the "Configuring Services" "Upgrading services" screen of the set up process. The migration path eventually fails, and as far as I can tell, it seems that the upgrade path just stays there forever.
Don't worry - I'm doing this all on a Super Duper! clone of my primary drive, so I can go back to SLS whenever I need to.
BUT, I can tell that the server's status is at least partially okay, even in this stalled setup state - iChat seems to work on various clients, and I can use Server Admin to see stats and services, etc.
So despite the discomfort of a failed install, part of me feels like I'll be fine with the LS if I can just figure out how to move my old data into the right places for the new system to use it. But I can't find any guidance for that. I'm looking to migrate OD (seems to have migrated fine), iCal, iChat, Address Book, Wikis, Time Machine, and File Sharing (which should be trivial to set up, I reckon).
Can anyone point me in the right direction?
Thanks very much,
WillhausOkay, so I've had some marginal success.
After leaving the hung install for a ridiculous amount of time (24+ hours), I realized that I could click the help button, and from the help window click the "further info about Lion Server" link to launch Safari. That gave me access to Software Update from the Apple menu, which then let me install the latest Safari update which conveniently enough requires a restart.
After restart, the Server Migration Assistant kicked in again, but failed quickly in the upgrading services stage. Another restart, and the sever finally booted more or less normally.
The strange thing was that although chat services worked fine during the hung install, all OD-related services stopped working after restarting. Turns out there were no users or groups in OD. Importing them from an OD archive, though, restored them.
So now iChat works great (even the old chat longs migrated successfully), and AFP is properly sharing our volumes across our studio's network. So our server is limping along.
The other services we need that aren't up yet are Wiki and iCal. Some info about those:
Wiki: administrators can log in and see all wikis just fine. That's awesome because it means the data migrated successfully. Any non-admin users can log in, but are then get a wiki-styled page that says simply "No wikis found". It's as if they don't have permissions to see the wikis, even though in Server.app they belong to the groups that the wikis are associated with. I've tried removing and re-adding users to groups, but that doesn't seem to do it. Any ideas how to fix this?
Calendar: While I can't get this to work, it's not like it's completely lifeless. An account in a client Lion iCal configured with the proper Lion settings returns an error that reads:
"The Server is Busy or Unavailable.
"The server at myserver.com is currently unable to handle the connection for account “ Calendars” due to a temporary overloading or maintenance of the server. If this continues you should contact the server administrator.
"You may try to connect to the server again or take the account offline."
As a logged in administrator, in a wiki clicking on Calendar in the nab bar goes to the calendar style page with an unending dialogue box that reads "Getting events from server". And clicking on Calendar from Home page footer takes me to the URL https://myserver.com/webcal with an error that says:
"Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Apache/2.2.20 (Unix) mod_ssl/2.2.20 OpenSSL/0.9.8r DAV/2 Server at myserver.com Port 443"
Again, at least I'm confident that the data migrated properly - I can find all the calendar data in it's proper new location - but either the service won't start or something's not configured correctly. I've tried chaining the hostname and restarting the service about a billion times. I've got no idea what to try next. Any ideas?
Thank you so much,
Willhaus -
10.5 to 10.6 Server Upgrade - Apache Fail
Hello,
I did a server upgrade last night from Leopard 10.5 Server to Snow Leopard Server. Everything went surprisingly well aside from one issue I've detected. All my existing services are working with the exception of the Web service. It starts and I get the green light but Apache is not working. In the overview, it says web service has started but no information on Apache version or start time.
Prior to the update I had been running Apache 2.2 so I assumed everything would be happy updating the OS. When the service is off and I click on the Logs tab I see all my old logs, as soon as I start the service everything goes blank so somewhere there is a disconnect with Apache 2.
Any ideas where to start? I cloned the server to another RAID set just in case of failure plus I have my backups, I even tried deleting everything in the Apache2 folder and replacing it with my 10.5 Apache2 contents but still no luck.
A bit baffled.I like your idea but after doing some research it appears as if the upgrade did not install somethings cause reactivating the system with the default php that ships does not work at all. I would have preferred to do it your way. I did build php ver 5.3.8 and its all working, even the ionCube module but I'm just wresting with a small issue iconv, believed to be a bug. But if I could wipe the slate clean and have everything default I would have, it's just every reference I found pertianing to the factory installation of php were not there.
My only reason for the upgrade to begin with is to support the ionCube module for an OpenRealty installation, other than that server 10.5 was working perfect for me. I would love to have it just work as 10.6 intended and working and stable as you mentioned, just not sure if its possible at this point.
Apache 2.2, PHP 5.3.8, and MYSQL are all working at the moment.
My small issue, loving this apache command,
Syntax error on line 1464 of /private/etc/apache2/httpd.conf: Syntax error on line 8 of /etc/apache2/sites/+entropy-php.conf: Cannot load /usr/local/php5/libphp5.so into server: dlopen(/usr/local/php5/libphp5.so, 10): Library not loaded: /usr/local/php5/lib/libiconv.2.dylib\n Referenced from: /usr/local/php5/libphp5.so\n Reason: Incompatible library version: libphp5.so requires version 8.0.0 or later, but libiconv.2.dylib provides version 7.0.0 -
Sql Server 2008 R2 setup status failed
Hi guys, plz help me when i install Sql2008 i get this error.... plx help me if you have solution...
Thanks in Advance...
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068052377
Exit facility code: 1212
Exit error code: 1639
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-03-14 18:21:32
End time: 2014-03-14 18:30:00
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: NIRMAL-PC
Machine processor count: 8
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United Kingdom)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: E:\Software _2\Software _2\SQL2008\x64\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: NIRMAL-PC\sdfg
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.SQL2008\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQL2008
INSTANCENAME: SQL2008
ISSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: NIRMAL-PC\sdfg
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: True
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Analysis Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_as_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\sql_engine_core_inst_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Integration Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Books Online
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182056\SystemConfigurationCheck_Report.htmHello,
Please try to uninstall SQL Server using YoyoYu suggestions on the following thread:
http://social.msdn.microsoft.com/Forums/en/sqlexpress/thread/4d6158a1-b601-428c-aad4-a1716e76de1a
When finish, re-install SQL Server again.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Upgrade to SQL Server 2008 R2 fails
I'm trying to upgrade from SQL Server 2008 Express to SQL Server 2008 R2 Enterprise. The installation is failing. I get two log files. The first appears to be a summary. The second is an MSI install log file. The MSI log is too large to paste in here and
I cannot attach files, so I included the section where it appears to fail. Based on the log contents below, how can I fix this?
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068024447
Exit facility code: 1212
Exit error code: 29569
Exit message: Failed: see details below
Start time: 2015-04-06 21:07:14
End time: 2015-04-06 21:13:54
Requested action: Upgrade
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150406_210629\sql_engine_core_inst_ctp6_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: DAD-PC
Machine processor count: 12
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services
1033 Express Edition 10.3.5500.0 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication
1033 Express Edition 10.3.5500.0 No
Sql Server 2008
Management Tools - Basic 1033 Express Edition
10.0.1600.22 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: H:\x64\setup\
Installation edition: ENTERPRISE
User Input Settings:
ACTION: Upgrade
AGTDOMAINGROUP: <empty>
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150406_210629\ConfigurationFile.ini
CUSOURCE:
ENU: True
ERRORREPORTING: True
FAILOVERCLUSTERROLLOWNERSHIP: 2
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
FTUPGRADEOPTION: Import
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
RSCATALOGSERVERINSTANCENAME: Unknown
RSUPGRADEDATABASEACCOUNT:
RSUPGRADEPASSWORD: *****
SQLDOMAINGROUP: <empty>
SQMREPORTING: False
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150406_210629\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Writer
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Browser
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Compact Edition Tools
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150406_210629\SystemConfigurationCheck_Report.htm
PARTIAL MSI LOG BELOW
Action start 21:13:47: AppSearch.
MSI (s) (40:00) [21:13:47:914]: Note: 1: 1325 2: v2.0.50727
MSI (s) (40:00) [21:13:47:914]: Note: 1: 1325 2: EventLogMessages.dll
MSI (s) (40:00) [21:13:47:914]: PROPERTY CHANGE: Adding ASPNET_EVENTLOGDLL property. Its value is 'C:\Windows\Microsoft.NET\Framework64\v2.0.50727\EventLogMessages.dll'.
MSI (s) (40:00) [21:13:47:915]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\\Setup 3: 2
MSI (s) (40:00) [21:13:47:915]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{FBD367D1-642F-47CF-B79B-9BE48FB34007} 3: 2
MSI (s) (40:00) [21:13:47:915]: PROPERTY CHANGE: Adding INSTALLSQLSHAREDDIR_32 property. Its value is 'C:\Program Files (x86)\Microsoft SQL Server\'.
MSI (s) (40:00) [21:13:47:916]: PROPERTY CHANGE: Adding INSTALLSQLSHAREDDIR_64 property. Its value is 'C:\Program Files\Microsoft SQL Server\'.
MSI (s) (40:00) [21:13:47:916]: PROPERTY CHANGE: Adding DEVENV_IDE8 property. Its value is 'C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\'.
MSI (s) (40:00) [21:13:47:917]: PROPERTY CHANGE: Adding SQLSETUPARPWRAPPER property. Its value is 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Release\x64\SetupARP.exe'.
MSI (s) (40:00) [21:13:47:917]: Doing action: RestoreSetupParams_64
Action ended 21:13:47: AppSearch. Return value 1.
MSI (s) (40:00) [21:13:47:920]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'RestoreSetupParams_64'
MSI (s) (40:C0) [21:13:47:921]: Invoking remote custom action. DLL: C:\Windows\Installer\MSICCED.tmp, Entrypoint: RestoreSetupParams
Action start 21:13:47: RestoreSetupParams_64.
<Func Name='LaunchFunction'>
Function=RestoreSetupParams
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='203'>
Doing Action: RestoreSetupParams
PerfTime Start: RestoreSetupParams : Mon Apr 06 21:13:47 2015
<Func Name='RestoreSetupParams'>
Error Code: 0x80077381 (29569)
Windows Error Text: Source File Name: sqlca\sqlcax.cpp
Compiler Timestamp: Thu Jul 3 22:23:09 2008
Function Name: RestoreSetupParams
Source Line Number: 190
Error Code: 29569
MSI (s) (40!D0) [21:13:51:016]: Product: Microsoft SQL Server 2008 Database Engine Services -- Error 29569. SQL Server Setup failed to restore the instance id.
Error 29569. SQL Server Setup failed to restore the instance id.
<Failure Type='Fatal' Error='29569'>
<EndFunc Name='LaunchFunction' Return='29569' GetLastError='203'>
CustomAction RestoreSetupParams_64 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)Hello,
You shared with us the following lines part of one of the logs created during the upgrade process:
Error Code: 29569
MSI (s) (40!D0) [21:13:51:016]: Product: Microsoft SQL Server 2008 Database Engine Services -- Error
29569. SQL
Server Setup failed to restore the instance id.
These lines are associated with Registry corruption. If this instance is a production instance, please call Microsoft Support for help.
For more information, please read the answer provided by Cathy Miller (MSFT) on the following thread.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/15a67403-3e67-47cd-8595-4330945bd6cc/sql-server-2008-sp2-update-fails-error-29569-sql-server-setup-failed-to-restore-the-instance-id?forum=sqlsetupandupgrade
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Service Pack Update Upgrade Status showing failed
I have SharePoint 2010 Server. I upgraded the same to SP2. In upgrade status it shows failed but once I run command
(get-spserver $env:computername).NeedsUpgrade.
It shows false. How to check if patch is successful?
Please remember to mark the replies as answers or vote as helpful if they help.Hi,
From your description, my understanding is that upgrade status shows failed when you upgrade SharePoint, but when you run PowerShell Command, it shows “false”.
Have you run the SharePoint Configuration wizard again after the status shows failed, then check if it will show successful status?
As upgrade status is failed, you should check if there are some error message in your USL log.
In addition, you could check the version of SharePoint if it is upgraded to the correct version number.
Best Regards
Vincent Han
TechNet Community Support -
SCSM 2010 to 2012 Management server upgrade failed
I upgrading my scsm 2010 to 2012 both Management and DW server.
So i have set up the secondary lab environment and do this.
The DW server has been upgraded successfully to 2012.
When i try to upgrade SCSM Management server, at the finalizing stage, i get this error as _RegisterExtensionsDeferred
Log as below.
2014-08-26T14:48:28.7717429+05:30 Always: Trace Session Started
02:48:28:
02:48:28:Application Started
02:48:28:This is 64-bit application.
02:48:28:Product ID is NOT installed
02:48:28:Found ProductID:{A193A8C7-CBE7-4F3B-887F-6B03EE43A208}, ProductName:Microsoft System Center Service Manager SP1, Version:7.0.6555.128
02:48:28:Found SMServer components
02:48:28:Found SMConsole components
02:48:28:Setup is running from: c:\SCSM2012\amd64\Setup
02:48:28:Using local Analysis server as default instance
02:48:28:Using 'DWASDataBase' as default Analysis server database name
02:48:28:Using 'Default' as default Analysis server database file path
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_license.rtf.
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_EvalLicense.rtf.
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\PrerequisiteInputFile.xml.
02:48:29:Found c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:48:29:All vital setup files found.
02:48:29:Upgrading Service Manager 7.0.6555 with 7.5.1561
02:48:29:Checking dependencies for Server upgrade...
02:48:40:Managment server is registered with Datawarehouse 'TESTSER'
02:48:42:Datawarehouse is up-to-date
02:48:42:Getting Management Group information from TESTSER:ServiceManagerNew
02:48:42:[GetManagementGroupPropertiesFromDB]: Opened the DB connection using Data Source=TESTSER;Initial Catalog=ServiceManagerNew;Integrated Security=True;Persist Security Info=False.
02:48:42:[GetManagementGroupPropertiesFromDB]: Found Management Group information.
02:48:42:[GetManagementGroupPropertiesFromDB]: Found Primary SDK server:..net.
02:48:42:Validating SmAdminRoleGroup
02:48:43:Checking MU OptIn state
02:48:43:MU is not opted in
02:48:43:Start adding DataItems
02:48:43:System Center Service Manager Install
02:48:44:Final Install Tasks
02:48:44:Done adding DataItems
02:48:46:Getting Domain List
02:49:35:LoadPrerequisites: Start adding ComponentTitles
02:49:35:LoadPrerequisites: Start adding DataItems
02:49:35:Memory check
02:49:36:Microsoft SQL Server 2008 Analysis Management Objects
02:49:36:Memory check
02:49:36:Processor speed check
02:49:36:Processor speed check
02:49:36:Processor speed check
02:49:36:IIS check
02:49:36:ASP.NET check
02:49:36:Basic Authentication check
02:49:36:Windows Authentication check
02:49:36:Microsoft .NET Framework 4 check
02:49:36:Windows Service Pack check
02:49:36:Microsoft Report Viewer Redistributable check
02:49:36:PowerShell 2.0 check
02:49:36:SharePoint Server 2010 check
02:49:36:SharePoint Farm Administrator check
02:49:36:SharePoint Server 2010 configuration check
02:49:36:ADO.NET Data Services Update check
02:49:36:Microsoft SQL Server 2008 Native Client check
02:49:36:Language Pack for SharePoint Server 2010 or SharePoint Foundation 2010 - English check
02:49:36:LoadPrerequisites: Done adding prerequisites checks
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Memory check prereq.
02:49:36:CheckPrerequisites: Logic Type:and MemoryCheck-8gbWarn: 0
02:49:36:
02:49:36:CheckPrerequisites: Memory check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Analysis Management Objects prereq.
02:49:36:Entered RequiredAMO
02:49:36:Trying alternate method of detection using Assembly.Load
02:49:36:CheckPrerequisites: Logic Type:and AMO-err: 0
02:49:36:
02:49:36:CheckPrerequisites: Microsoft SQL Server 2008 Analysis Management Objects: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Processor speed check prereq.
02:49:36:CheckPrerequisites: Logic Type:and ProcessorSpeedCheck2.5MHz-Warn: 0
02:49:36:CheckPrerequisites: Logic Type:and ProcessorCoreCheck2Core-Warn: 0
02:49:36:
02:49:36:CheckPrerequisites: Processor speed check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Windows Service Pack check prereq.
02:49:36:CheckPrerequisites: Logic Type:and Win2k8R2Sp1Check-Err: 0
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites: ProductType was not a match. Looking for: LanmanNT Found: ServerNT
02:49:36:CheckPrerequisites: Logic Type:or Win2k8R2Sp1DCCheck-Err: 2
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites: The value 6.1.7601.65536 was not within the range 6.2.0 to 9.9.9999.
02:49:36:CheckPrerequisites: Logic Type:or WinSrvrVNextCheck-Err: 2
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites: ProductType was not a match. Looking for: LanmanNT Found: ServerNT
02:49:36:CheckPrerequisites: Logic Type:or WinSrvrVNextDCCheck-Err: 2
02:49:36:
02:49:36:CheckPrerequisites: Windows Service Pack check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft Report Viewer Redistributable check prereq.
02:49:36:Entered RequiredReportViewer
02:49:36:CheckPrerequisites: Logic Type:and RptVwrCheck-err: 0
02:49:36:
02:49:36:CheckPrerequisites: Microsoft Report Viewer Redistributable check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking PowerShell 2.0 check prereq.
02:49:36:CheckPrerequisites: Logic Type:and PowerShell2Check-err: 0
02:49:36:CheckPrerequisites: Logic Type:or PowerShell2Check32-err: 0
02:49:36:
02:49:36:CheckPrerequisites: PowerShell 2.0 check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking ADO.NET Data Services Update check prereq.
02:49:36:Loading System.Data.Services.Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
02:49:36:Found version 3.5.30729.5420
02:49:36:CheckPrerequisites: Logic Type:and ADODotNetDataServicesHotfix-err: 0
02:49:36:
02:49:36:CheckPrerequisites: ADO.NET Data Services Update check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Native Client check prereq.
02:49:36:CheckPrerequisites: Logic Type:and SQLNCLI10-err: 0
02:49:36:
02:49:36:CheckPrerequisites: Microsoft SQL Server 2008 Native Client check: Passed
02:49:36:
02:49:36:**************************************************
02:49:37:CheckPrerequisites: Return Value 0
02:49:39:Doing Pre-Upgrade checks...
02:49:39:Validating database ServiceManagerNew on SQL Server TESTSER
02:49:39:Validating SQL Instance TESTSER
02:49:39:SQL Server: TESTSER
02:49:39:SQL Server version: 10.50.1600.1
02:49:39:Full text search installed: True
02:49:39:Checking if '\administrator' is Sysadmin Or (SecurityAdmin And DbCreator) on SQL Instance TESTSER
02:49:39:Stopping Service OMSDK on server
02:49:39:Starting Service OMSDK on server
02:49:41:Stopping Service OMCFG on server
02:49:44:Starting Service OMCFG on server
02:49:47:Validating Path C:\Program Files\Microsoft System Center\Service Manager 2010\
02:49:47:Checking for available free disck space
02:49:47:Checking directory write access
02:49:47:*** Pre-Upgrade checks passed ***
02:49:47:QuickFixEngineeringHandler: Unable to LoadQuickFixEngineeringFile.
02:49:47:SetProgressScreen: StartMinorStep.
02:49:47:statusUpdate: Resetting progress bar.
02:49:47:ProcessInstalls: Install Item System Center Service Manager Install has a Preprocessing delegate of SystemCenterServiceManagerPreinstallProcessor. Launching it now.
02:49:47:SetProgressScreen: Init MSI Install progress.
02:49:47:statusUpdate: Resetting progress bar.
02:49:47:LaunchMsi: Msi mutex is not in use.
02:49:47:LaunchMsi: MSI to launch is: c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:49:47:LaunchMsi: Turning off the internal UI for c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:49:47:LaunchMSI: Enable logging for the MSI at C:\Users\administrator.\AppData\Local\Temp\2\\SCSMInstall02.log.
02:49:47:LaunchMsi: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi is not in silent mode. Setting the external UI.
02:49:47:LaunchMsi: Launching c:\SCSM2012\amd64\Setup\Server\SM.msi
02:49:52:statusUpdate: Resetting progress bar for MSI: MaxValue 58857
02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
02:50:09:Install Progress - (ProcessComponents) Updating component registration
02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
02:50:10:Install Progress - (StopServices) Stopping services
02:50:16:Install Progress - (_StopNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Stopping Health services
02:50:17:Install Progress - (RemoveODBC) Removing ODBC components
02:50:17:Install Progress - (RemoveFiles) Removing files
02:50:17:Install Progress - (CreateFolders) Creating folders
02:50:17:Install Progress - (InstallFiles) Copying new files
02:50:30:Install Progress - (_CreateDatabase) Creating Database
02:50:30:Install Progress - (_ExecuteSqlScripts) Configuring Database
02:52:07:Install Progress - (ExecuteSqlStrings) Executing SQL Strings
02:52:07:Install Progress - (CreateShortcuts) Creating shortcuts
02:52:07:Install Progress - (WriteRegistryValues) Writing system registry values
02:52:08:Install Progress - (_InstallServerPerfCounters.D2179E31_E456_401A_A820_CEBB135E3429) Installing Server Performance Counters
02:52:12:Install Progress - (WriteEnvironmentStrings) Updating environment strings
02:52:12:Install Progress - (_Rollback_UninstallBIDMOF.68918168_3885_4F75_BBF8_0CC84213F8D1) Rolling back BID MOF Installation
02:52:23:Install Progress - (GenerateScript) Generating script operations for action:
02:52:24:Install Progress - (_MPProcessorDeferred) Importing Management Packs
02:52:25:Install Progress - (_ExecuteSqlScripts) Configuring Database
02:52:26:Install Progress - (RegisterUser) Registering user
02:52:26:Install Progress - (RegisterProduct) Registering product
02:52:26:Install Progress - (PublishComponents) Publishing Qualified Components
02:52:26:Install Progress - (MsiPublishAssemblies) Publishing assembly information
02:52:26:Install Progress - (_ConfigureConfigService.D2179E31_E456_401A_A820_CEBB135E3429) Configure Config Service
02:52:26:Install Progress - (_CreateInstanceQualityRelationship) Creating Default Instances, Qualities And There Relationships
02:52:26:Install Progress - (PublishFeatures) Publishing product features
02:52:26:Install Progress - (_StartNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Restarting Health Service
02:52:26:Install Progress - (PublishProduct) Publishing product information
02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:32:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:44:An error occurred while executing a custom action:_RegisterExtensionsDeferred
Upgrade failed after making permanent changes to this management server. A disaster recovery procedure will be necessary to rebuild this machine before attempting upgrade again. Consult the User Guide to determine which action to take next.
02:57:44:Install Progress - (Rollback) Rolling back action:
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 3
02:57:44:Install Progress - (Rollback) Rolling back action:
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 10525
02:58:43:MsiInstallProduct finished for msi c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:58:43:LaunchMSI: Setting rollback to true
02:58:43:LaunchMSI: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi returned error 1603:Fatal error during installation
02:58:43:ProcessInstalls: Install Item System Center Service Manager Install failed to install. We did not launch the post process delegate.
02:58:43:SetProgressScreen: FinishMinorStep.
regards Sundaresan.CJeremiah,
We ran into this as well. One of two options:
1.) Just run a repair on the SQL Server installation
2.) Repair the WMI settings on the SQL Server as descibed here:
http://social.technet.microsoft.com/Forums/en-US/systemcenterservicemanager/thread/2a91d03e-a685-495e-89ac-a591ec5871f6/
bb -
OS X Lion Server upgrade *failed*, now what?
The installation process got as far as registering a message like, "Upgrading Services, failed". The only option was to click the Lion icon for reboot. That, I did, then I couldn't find the 10.7 Server Admin Tools, which I had to download separately. The "Open Directory" part of the Server Admin UI does not have the *expected* start/stop button and the service is stopped.
It would be nice to have a post-upgrade program to checklist what went well, what needs fixing with pointers to resources. It's possible none of my services programs got upgraded.
I got an email receipt with a link to "Report a Problem" which turns out to be mostly a hole for getting lost, but at least it got me here to present feedback.goeres wrote:
But do we need all the blows and wristles?
Yes. Lion Server out of the box does not allow for complex custom configurations short of manually editing text configuration files, which is an ironic step backwards from SL Server considering Apple's commitment to ease-of-use GUIs.
Instead of improving the admin tools that were available with SL Server, they simply removed too many of them. That would suggest that they've given up on the market for business servers to focus on the market for toy servers for home use, which is a bit disconserting considering that Lion Server's security is also woefully lacking out of the box. It's hard to figure how any IT professional could take it seriously.
The Internet is a dangerous place to play with a server. Apple's quest to simplify OS X Server with Lion has resulted in a server package that is dangerously simplistic. If Lion Server becomes popular for home use, I expect to see a rapid expansion of botnets. -
Hi,
I am using Javascript serializer to send server side code to javascript.
This works in IE 9, Mozilla, chrome. But fails with error in Safari as "request failed. unexpected response from server. the status code of response is '0' . status text of the response is ". null
My code is as below:
<asp:UpdatePanel ID="panLayout" runat="server">
<ContentTemplate>
<div id="divloadingImage" >
<br />
<asp:Image ID="imgLoading" runat="server" ImageUrl="/images/rotate.gif" ImageAlign="Middle" />
<br />
</div>
<div id="banner-fade" >
<ul id="carousel" class="bjqs">
</ul>
</div>
<asp:Timer ID="timerRSS" Interval="1" runat="server" ontick="timerRSS_Tick"></asp:Timer>
</ContentTemplate>
</asp:UpdatePanel>
In CS:
protected void timerRSS_Tick(object sender, EventArgs e)
DisplayImages();
divloadingImage.Visible = false;
bannerfade.Visible = true;
timerRSS.Enabled = false;
private void DisplayImages()
List<SharePointListItem> allImages = GetallImages();
JavaScriptSerializer serializer = new JavaScriptSerializer();
string json = serializer.Serialize(allImages);
string script = string.Format("<script type=\"text/javascript\">var allSliderImages={0}</script>", json);
if (!this.Page.ClientScript.IsClientScriptBlockRegistered("clientScripts"))
ScriptManager.RegisterClientScriptBlock(panLayout, panLayout.GetType(), "clientScripts", script, false);
string scriptRegister = string.Format("<script type=\"text/javascript\">FetchData();</script>");
ScriptManager.RegisterClientScriptBlock(panLayout, panLayout.GetType(), "clientScriptData", scriptRegister, false);
In Javascript:
function FetchData() {
if (typeof allSliderImages !== "undefined") {
for (var i = 0; i < allSliderImages.length; i++) {
Imagesuccess(allSliderImages[i].fileleafref, allSliderImages[i].filedirref, allSliderImages[i].caption1);
var rota = $("#bannerfade");
rota.css("display", "block");
function Imagesuccess(fileLeaf, fileDir, UserCaption1) {
var ul = $('#bannerfade > ul');
var li;
var filename = fileLeaf;
var dir = fileDir;
var caption1 = UserCaption1;
var sfils = filename;
filename = dir + '/' + filename;
var imageCaptionData;
if (caption1 != null && caption1 != "") {
imageCaptionData = '<div class="HeadlineDiv">' + caption1 + '</div>';
li = $('<li>' + imageCaptionData + '<div class="SubHeadline" style="color:white;">' + '<br/></div>' + '<img src="' + filename + '"/>' + '</li>');
ul.append(li);
$('#bannerfade').bjqs({
height: 354,
width: 970,
responsive: true
Below is the data I get:
<script type="text/javascript">
var allSliderImages=[{"id":"1","Title":"Scenic","caption1":"scenic","fileleafref":"02.jpg","filedirref":"/s/Test/Library"},
{"id":"2","Title":"nature","caption1":"scenic2","fileleafref":"C034.jpg","filedirref":"/s/Test/Library"},
{"id":"3","Title":"Tiff","caption1":"Tiff","fileleafref":"test_tiff.tif","filedirref":"/s/Test/Library"}]</script>
The data is shown in all browsers except Safari. How to fix this?
Update: I have checked this link: http://sharepoint.sureshc.com/2013/07/unexpected-response-data-from-server-in.html
but that did not help.
ThanksHi,
From
this documentation, though SharePoint 2013 supports several commonly used web browsers including Apple Safari (latest released version), it is not guarantee
that SharePoint 2013 can run perfectly on all these browsers, “certain web browsers could cause some SharePoint 2013 functionality to be downgraded, limited, or available only through alternative steps”.
According to the code provided, it seems more relate to ASP.NET, therefore, a suggestion is that you can open a thread in ASP.NET forum, communities there will be more familiar
with this issue:
http://forums.asp.net/
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support -
i have Server 2008 r2
exchange 2010 evrything was working fine but now when i try to open the Exchange management console i get this errore
the follwing error ocurred when serching for on premises exchange server
Connecting to remote server failed with the following error message:
The WinRM client received an HTTP server error status 502, from the remote ws-managment servic For more information, see the about_Remote_Troubleshooting Help topic. It was running the command
'Discover-ExchangeServer -UseWIA $true -SuppressError $true'.
please help
Mahmoud HanefyAnything in the event logs?
Any help from:
http://msexchangeteam.com/archive/2010/02/04/453946.aspx
Troubleshooting Exchange 2010 Management Tools startup issues -
Exchange 2010 Initialization failed: The WinRM client received an HTTP server error status 500
Good morning,
I have major problems with exchange 2010 this morning.
First off, exchange stopped sending and receiving any emails- whether internal or external. We are running a server 2008 R2 domain and exchange 2010 is installed on a Server 2008 virtual machine.
I tried simply rebooting the server and then tried logging on and getting into the Exchange Management Console. I receive the following error in the exchange management console:
Initialization failed
The following error occurred while attempting to connect to the specified Exchange server 'exchangesvr.chs.internal';
The attempt to connect to
http://exchangesvr.chs.internal/Powershell using "Kerberos" authentication failed: Connecting to remote server failed with the following error message: The WinRM client received an HTTP server error status (500), but the remote service did not include any
other information about the cause of the failure. For more information, see the about_Remote_Troubleshooting Help topic.
I followed the steps listed here:
http://technet.microsoft.com/en-us/library/ff607221(EXCHG.80).aspx
but everything appeared to be correct. I did not have to make any changes because everything was set as it should be according to that information.
Any help would be much appreciated.
Best regards
KatrinaHi,
I had the same problem, and I spent a weekend looking a solution, fortunally, I have it:
Please follow this steps:
Install WinRM IIS Extension, adding this feature from Server Manager.
Change IPv4 over IPv6 lookup preference, because the FQDN fails to find the server on TCP/IPv6.
To verify this, on Command Prompt please make this test: ping yourserver.yourdomain.domain.
Maybe you obtain TCP/IPV6 address response.
Probably the Internet Information Services (IIS) Manager dont have the binding for IPv6, only for IPv4.
To change IPv4 over IPv6 lookup group prefence, follow this steps:
Please open regedit, locate the skubkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\
On DisabledComponents subkey, double click, change de value for
0x20 (or 4120 Hexadecimal). this value make the Windows OS to prefer IPv4 over IPv6.
Repeat the test, on command prompt:
ipconfig /flushdns (Enter) to flush DNS cache.
ping yourserver.yourdomain.domain.
At this moment you obtain TCP/IPv4 address response.
To check Exchange Managment Console operation, you must restart the server.
Please restart the server.
Best Regards, -
Error at phase Installation status: failed
Hi,
i am getting problem in phase Installation. please look into the below error:
PREPARE: START OF PHASE SHDINST_CPY
You have the alternative to use the profiles
from a test upgrade with identical environment
for the so-called shadow instance. If you choose
this alternative the profiles will be taken from
the subdirectory <save>.
Please also refer to the upgrade manual for more details!
Do you want to take the profiles?
when i choose yes, i am getting this error "SEVERE ERROR: copy of C:\usr\sap\put\save\SHDINST.LST failed"
if i choose no, its running but at the end i getting this error
"'Installation' status: failed".
Please see file C:\usr\sap\put\log\CHECKS.LOG
for the actions which have to be performed.
#=======================================================================
Starting new execution of PREPARE modules
Installation
at 20080318150442.
#=======================================================================
#==================================================#
Requests and information for module Installation #
#==================================================#
#=========================================================#
PREPARE module Installation finished with status failed #
#=========================================================#
#====================================================
Execution of all selected PREPARE modules finished.
#====================================================
my R3up is running but shadow instance is down, dispatcher is not connecting to message server.
please help me.Hi,
Answer to the PREPARE question
You have the alternative to use the profiles
from a test upgrade with identical environment
for the so-called shadow instance. If you choose
this alternative the profiles will be taken from
the subdirectory <save>.
Please also refer to the upgrade manual for more details!
Do you want to take the profiles?
YES - only if you want to use profiles used in previos TEST upgrade.
Normally we say NO and go ahead.
Then you say you are still getting the error in final assesment.
This should not be the case. I suggest you to repeat the Installation phases again and give all the inputs again properly.
Do this and reply again.
Regards,
Suhas -
10.6.8 to Mavericks Server Upgrade loses Open Directory Users
Hi,
I have an OpenDirectory Master running OSX Server 10.6.8. An upgrade to Mavericks 10.9 has just failed.
The server has about 50 OD users and passwords need to be retained across the upgrade. Apart from OD, the only other active service is AFP file sharing.
DNS is good forward and back as per this article: OS X Server: Steps to take before upgrading or migrating the Open Directory database
I followed these Apple guidelines for server migration: OS X Server: Upgrade and migration from Lion Server or Snow Leopard Server.
I cloned the boot drive, booted from the clone, upgraded to Mavericks, then installed the Mavericks Server app.
On opening the Mavericks Server app "Configuring services' showed for 5 minutes, but then an error message appeared. I did not record it exactly, but it was something like, "There was an error configuring the server. Certificate not valid!".
I was able to continue through the error but on opening Server app there were no OD (local/network) users showing. Authentication was not happening.
I had underestimated the time to get the installation done and I had used up the window of downtime I had booked - I did not have much time to troubleshoot. So, I cut back to the original hard drive and the server is back to 10.6.8 again.
Can anyone point me in the right direction to find out what may have gone wrong? How can I get my users into 10.9 Server?
Many thanks,
b.Linc Davis advice is spot-on, as usual.
There seem to be dozens of sub-databases in the LDAP database. A problem in any of them seems to derail the entire conversion process. I tried a straight conversion and was also disappointed that there were unresolved issues, and it meant that the conversion failed.
So I did the export route using WorkGroup Manager, and exported four sets:
Users
Groups
Computers
Computer groups
go to the appropriate pane (e.g., Users) and Select All, then choose Export, and give it a name (probably with an embedded date in case you need to do it again later)
Then use 10.9 WorkGroup Manager (available as a separate download) to Import.
When re-imported, everything worked just fine (except the passwords, which cannot be carried forward using this method). I did have to manually enable at least one service, such as File Sharing service in Server [admin], or users showed up as "not allowed" [to log in].
This entire process of getting Server 3 to work is fraught with peril, and everything converges on ONE diagnostic, "Network users can't log in". Which means you blew it, but provides no additional information about WHERE you blew it.
There do not appear to be any magic bullets. It is just a tough slog. Users who reported success after failing the first time reported they returned to fundamental principles and did all the steps over, in order, to attain success. -
Oracle Calendar Server Configuration Assistant fails with Red Hat ES 4
I am trying to install Oracle Collaboration Suite 10.1.2 on a Red Hat ES 4 server platform.
I have installed with the Advanced Installation Option. The infra installation proceeds well then when i try to install the ocs application tier (different Oracle Home) the Calendar Server Configuration Assistant fail.
Output :
================================================================================================================
Output generated from configuration assistant "Calendar Server Configuration Assistant" (attempt 1):
Time zone selected: EBST3EBDT.Warning: Existing node(s) found in unison.ini. Using node 1 for configuration tasks.
Current State for Instance:ocsapp.lf-ocs1.lima_e_falcao.inet
Component Type Up Status In Sync Status
================================================================================
1 HTTP_Server HTTP_Server Up True
2 OC4J_Content OC4J Up True
3 OC4J_Mail OC4J Up True
4 OC4J_OCSADMIN OC4J Up True
5 OC4J_OCSClient OC4J Up True
6 OC4J_Portal OC4J Up True
7 OC4J_RM OC4J Down True(Disabled)
8 OC4J_Wireless OC4J Up True
9 OC4J_imeeting OC4J Up True
10 Service_Component_Cont OC4J Up True
11 home OC4J Up True
Warning: more than one process-type Element in the snippet. only the 1st one is appended
Error: can not append, there is a same named process type element in the exisitng ias-instance.ias-component
Error: Could not configure OPMN module information.
java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1
at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
at oracle.calendar.server.configuration.OCalConfig.configureOPMN(Unknown Source)
at oracle.calendar.server.configuration.OCalConfig.run(Unknown Source)
at oracle.calendar.server.configuration.OCalConfig.main(Unknown Source)
3 [main] ERROR emSDK.config - oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
at oracle.sysman.emSDK.conf.TargetInstaller.addTargetInt(TargetInstaller.java:1148)
at oracle.sysman.emSDK.conf.TargetInstaller.addTargetFromFile(TargetInstaller.java:1075)
at oracle.sysman.emSDK.conf.TargetInstaller.main(TargetInstaller.java:3669)
Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
Warning: ocad.conf already included in /u01/oracle/product/10.1.2/ocs_2/Apache/Apache/conf/oracle_apache.conf.
Error: java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1: Registration of ocal_targets.xml into targets.xml failed.unistart: Oracle Calendar Server 10.1.2.0.0
unistart: Copyright (c) 1993, 2005, Oracle.
unistart: All rights reserved.
unistart:
unistart: opmnctl: opmn is already running
unistart: opmnctl: starting opmn managed processes...
unistart: The Calendar Server started successfully.
Orclguest account has already been provisioned for Calendar.
Fatal Exception caught : java.lang.NullPointerExceptionopmnctl: stopping opmn managed processes...
Configuration assistant "Calendar Server Configuration Assistant" failed
================================================================================================================
Someone can help me?
Thanks a lot.is it a reinstallation or a first one on a bare server ? if there were several attempts please be sure you cleaned evrything before launching the installation :
- product directory
- /etc/ora*
- database
- oraInventory
- /tmp (I had a similar issue with remaining files in /tmp, even after rebooting)
If it doesn't work, check that you don't hit the NO-EXCUTE problem (see the OCS 10.1.2 release notes, look for "noexec")
Maybe you are looking for
-
HOW TO USE Class Interface CL_GUI_FRONTEND_SERVICES
Dear All, I am working to get output of SMARTFORMS through report into PDF file.Following code i am using inside LOOP. *CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG EXPORTING WINDOW_TITLE = DEFAULT_EXTENSION = 'PDF' DEFA
-
How to use Infocube in Look ups
Hi Experts, i have a requirement that i have Infoset as source and Infocube as target. For the two key figures in the target i neet to get the values from some other Infocube by comparing some characteristics using look ups.. Before i have used Look
-
Could some one calrify the following on the COI Question 1 For jointventure consolidation, the US GAAP says to follow Equity method if the subsidiary is incorporated one. If it is not to follow proportational consolidation. What does it mean by inco
-
Unzip file with .sar and .car extensions.
Hi, how unzipping file with .sar .car extensions? Best regards
-
Class A is Loading Class B Using Reflection
Hi, I am facing the below problem. Class A is loading Class B By Using Reflection package. Class B is one jar (Eg: B.jar) ,Class A is one Jar (Eg: A.jar) Class B internally using Class A variables and methods. When ever loading the class B from Class