SAINT/SPAM UPDATE takes longer time more than 12hours

Hi everyone,
I am doing SAINT/SPAM UPDATE version 33 on NW70 systems running on windows 2003 x64 servers with oracle 10g database. The update is running for more than 12 hours and has not finished yet.
Normally SAINT/SPAM update wud take 15 to 20mins. But this is very unusual.
Has anyone faced similar problems before ?
Please suggest solutions if any
thanks
Moses

Check the import monitor and the tp system log to check the status of the patch... please post here any errors found.
Loging using DDIC
ensure 000 client you login
ensure your active login session on CI instance (in case multiple instances)
ensure to shutdown/stop all other instances (Dialog Distances) running on other hosts
This information is inacurate and missleading... You don't need to logon with DDIC you can use any user with the right authorizations, also you don't need to shutdown any instances.
Regards
Juan

Similar Messages

Urgent run the job --SBIE0001 takes long time more than two hours

hi expert,
we run the job which cocntian the program SBIE0001 it takes so along time,
we use the job to eatra the date from our system to another satellite system, by checking the
job this is one step takes the mainly time as below.
88 LUWs confirmed and 88 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
any update will be appreciated. thanks in advance.

If you have transaction ME30 active in yous system, run the program into in.
It will give more information about how the time is lost.

DELETE query takes long time more than 30 min

Hi
I have delete query as below.It takes 1300 sec to execute .Please let me know how to reduce the time of execution.I have indexes on both the columns jdoid,jdoversion of deletion.
DELETE FROM SIT7016.DEVICEINTERFACE WHERE JDOID = :1 AND JDOVERSION = :2
Regards
Pandu

udnapp wrote:
I have delete query as below.It takes 1300 sec to execute .Please let me know how to reduce the time of execution.I have indexes on both the columns jdoid,jdoversion of deletion.
DELETE FROM SIT7016.DEVICEINTERFACE WHERE JDOID = :1 AND JDOVERSION = :2Pretty meaningless information without an the execution plan.

Security updates takes long time to install through Software Center

Hi Folks,
We have a setup with SCCM 2012 R2 CU4 as a Primary Site server where SUP also enabled. I deployed the windows security updates to the test servers collection by deployment type as Available.
I verified in test servers that all the deployed security updates are listed under Software Center client, but when I checked all the updates and tried to install. it is taking long time to install . Most of the time the updates are in “waiting to install”
status and finally ends up in failed state with error codes 0xc80003f3, 0x8007000e. Have verified all the logs windowsupdate.log, Updatesdeployment.log, WUHandler.log are points to the same error code. Found that multiple SVChost.exe process consumes more
memory during patching process.
However we have enough physical memory(2 GB) and page memory( Min 2 GB to Max 4 GB) configured on the servers (Windows 2012 R2 SP1) . Need some guidance in further troubleshooting...

Most of the servers managed by me today are having anywhere 2 - 4 GB RAM installed. How do one install the security patches through SCCM with this configuration?. Selecting more than 4 patches at the same time to install does gives memory errors.
I would suggest 4GB RAM for a modern Server OS e.g. WS2012R2 is simply too little memory.
There have been quite a lot of issues in recent months, relating to Software Updates, affecting WSUS and also ConfigMgr, e.g.
http://blogs.technet.com/b/configurationmgr/archive/2015/04/15/support-tip-configmgr-2012-update-scan-fails-and-causes-incorrect-compliance-status.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Delivery updation takes long time

Hi all,
I am working on ECC 6.0 implementation. Delivery saving is taking long time.
Program is SAPLMCS5 and function module is MCV_STATISTICS_DELIVERY.
When delivery is having more than 200 line items this FM is taking long time .
If anybody has clue, please reply me soon.
Thanks & Regards,
Kavan Shah

Hi....
Yes...u can hide..........just Check the hide box for those fields.......R u in BI 7.0 or BW...........whatever ........is the no of records is huge?
If so u can split the records and execute............I mean use the same IP...........just execute it with different selections.........
Check in ST04............is there are any locks or lockwaits..........if so...........Go to SM37 >> Check whether any Long running job is there or not.........then check whether that job is progressing or not............double click on the Job >> From the Job details copy the PID..............go to ST04 .....expand the node............and check whether u r able to find that PID there or not.........
Also check System log in SM21............and shortdumps in ST04........
Now to improve performance...........u can try to increase the virtual memory or servers.........if possiblr........it will increase the number of work process..........since if many jobs run at a time .then there will be no free Work prrocesses to proceed........
Regards,
Debjani......

Application is getting crash when recording long time( more than 1hour 30m)

Implemented a Java app to record audio & video .
For audio recording - Java Sound , video - writing all captured images to one file by capturing images using java.awt.Robot class
Generating video file using JMF from captured images.
Once clicked on stop button, I am merging audio & video files using JMF .
But Here the problem is if I record more than 1hr 30min then I clicked on STOP button, then the app is crashing.
I am not getting any out of memory or some other exceptions.
Please suggest.
Thanks
GRR

          * This is called from the Processor to read a frame worth of video data.
          public void read(Buffer buffer) throws IOException
               logger.debug(" read(): nextImage = " + nextImage + ",numOfFrames : "+RecordingConverter.numOfImages);
               if (nextImage >= numOfImages)
                    start = System.currentTimeMillis();
                    // We are done. Set EndOfMedia.
                    logger.debug("Done reading all images.");
                    buffer.setEOM(true);
                    buffer.setOffset(0);
                    buffer.setLength(0);
                    buffer.setFormat(format);
                    ended = true;
                    return;
               nextImage++;
               int imageSize = EndianFormat.readInt(recFile);
          byte data[] = new byte[imageSize];
          recFile.readFully(data);
               buffer.setData(data);
               buffer.setOffset(0);
               buffer.setLength(data.length);
               buffer.setFormat(format);
               buffer.setFlags(buffer.getFlags() | Buffer.FLAG_KEY_FRAME);
          }

Firefox shows a black screen suddenly while browsing or when left idle for long time (more than 1 hr).

Firefox suddenly turns totally black while I was browsing yesterday. I tried restarted it, and it works fine. In such state none of the menu or actions items are accessible. Even while closing the browser I get the confirmation popup which is also completely black.
Screenshot link: http://prntscr.com/55kggq
I had to randomly click on the "close tabs" button.
I am using Mozilla Firefox v33.1 in Windows 7, 32 Bit OS with i3 processor, 4GB RAM.

''nescafe2002 [[#answer-663423|said]]''
<blockquote>
I've just had the same issue (sudden black screen while browsing), probably related to my graphics card driver which I've updated two days ago.
Laptop model: ASUS N550JV CN270H
Graphics card model: Intel(R) HD Graphics 4600
Old driver: 10.18.10.3308 (2013-09-16)
New driver: 10.18.10.3960 (2014-09-29)
If the problems recurs, I will re-install the 10.18.10.3308 driver and post the results here.
</blockquote>
After 3 more blackouts, I restored 10.18.10.3308 and the problem went away.

Create Table taking long time (more than 60 minutes) and still running

Hi all,
I was able to create and drop table until yesterday, but now the when I issue the below statement the server is stuck, its showing creating table in process.... and then it hangs till you cancel the operation. Query of table and running the procedures are ok, so I am confused why only create table is having issues.
CREATE TABLE table1
( field1 VARCHAR2(20) );
Any help at the earliest will be appreciated,
Thanks

Just check up your status of the log files
select * from v$logfile
If the status is inactive,
Just do a
alter system switch logfile
The alert log should have the problem specified check for the file.
also try to recreate another user and take a try in table creation:
SQL> connect sys/******
SQL> create user scott identified by tiger default tablespace users temporary tablespace temp quota 100m on users;
SQL> grant connect, resource to scott;_
SQL> connect scott/tiger
SQL> create table xyz ( a number);
SQL> create table abc ( d number);
Could you successfully create the tables?

Gif files takes long time to load..!!

Hi,
I found the gif/jpg files takes long time ( more than 5 or 6 seconds depends on size ) to render on JavaHelp viewer EditorPane.. I am using JDK 1.3 / Win 2000 / 256 MB / 1 GHz Pentium. Also found JVM uses 90% of the system resources while loading the pic files. I have noticed it as a JDK 1.3 bug from another thread.
http://forum.java.sun.com/thread.jsp?forum=42&thread=230409
I would like to know is there any other solution for this, keeping my JDK Version as it is?
Thanks
Reji

I would convert your images to JPegs if possible since they are so much smaller in size and therefore load much quicker. I had exactly the same problem but I sorted it out this way. I know it's a pain and it will probably screw up your view, but it will speed up your load time ten-fold and I don't know of any other work around. sorry...

Validate map in FDM takes long time and finally expires

Hi,
I have an issue with FDM Mapping.
When i click the "validate" option in workflow, the FDM processing takes long time (more than an hour) and finally expires.
But when i open a new web interface, i am seeing a gold fish on validate - which means validate mapping has been done.
As we are in production environmeny, Can someone quickly clarify me, why this happen.
Thanks,
Siva

Hello Kelly,
Something you said concerns me: +"Because we automated data loads for the large file, this issue is extremely low on the priority list."+
In this type of scenario we notice customers/partners implementing FDM as an 'ETL' utility. FDM is not an ETL utility and should not be treated/used as such. In the event that you are doing this, Support has no control of the application as it is a mis-use of what FDM is for.
Files that are being pushed into FDM should always be broken down into the smallest components(locations) and used as a 'front end,' user interface.... not a server-side/IT application. If you meet this criteria of FDM, then there is not much Support can do.
If you do not think you are misusing FDM, I would highly suggest you open/create a Support SR if you do not use FDM in that manor. Consultants/Partners are functional/design based.... and not necessarily trained as Support Engineers. Therefore they might not have the skills required to make such determinations.
Thank you,
Oracle Global Customer Support

Deleting takes long time

Hi,
I have a table with around 12 million rows. It takes a very long time, more than 200 seconds even deleting just one row and passing primary id in where clause. This is a partitioned table. But the query runs fine on other tables similarly partitioned with more number of rows. Can any one please help.
Thanks
SC

Hi,
I will turn on the trace to see the results. Here is the result from plan table:
SQL> SELECT * from plan_table;
STATEMENT_ID PLAN_ID TIMESTAMP REMARKS OPERATION OPTIONS OBJECT_NODE OBJECT_OWNER OBJECT_NAME OBJECT_ALIAS OBJECT_INSTANCE OBJECT_TYPE OPTIMIZER SEARCH_COLUMNS ID PARENT_ID DEPTH POSITION COST CARDINALITY BYTES OTHER_TAG PARTITION_START PARTITION_STOP PARTITION_ID OTHER DISTRIBUTION CPU_COST IO_COST TEMP_SPACE ACCESS_PREDICATES FILTER_PREDICATES PROJECTION TIME QBLOCK_NAME
8091 2/24/2009 1 DELETE STATEMENT ALL_ROWS 0 0 4 4 1 58 36157 4 1
8091 2/24/2009 1 <remark><info type='plan_hash'>3964552726</info></remark> DELETE PLANT PLANT_SAMPLE 1 0 1 1 DEL$1
8091 2/24/2009 1 INDEX UNIQUE SCAN PLANT PS_PK_IND T@DEL$1 INDEX (UNIQUE) ANALYZED 1 2 1 2 1 3 1 58 28686 3 "T"."PA_ID"=1062054265771 "T".ROWID[ROWID,10], "T"."PA_ID"[NUMBER,22], "T"."PA_PS_ID"[NUMBER,22], 1 DEL$1
There are not table level or row level locks on this table and also 'on delete cascade' option is off.
Thanks
SC

Oracle grid infrastructure installation take long time on step 15 (perform prerequisite checks )

Oracle grid infrastructure installation take long time on step 15 (perform prerequisite checks )
I'm starting install and configure Oracle RAC 11gR2 on redhat 6.3 , when i reached step 15 (perform prerequisite checks ) it's taking long time more than 10 hours and still checking .... i closed it and start installation again it's same still waiting in perform prerequisite checks 75% complete
it is normal ?? what should i do ?? how i can monitoring installation steps and why this step take all this time please help .

Pl identify which exact version of 11gR2 - currently only 11.2.0.3 is certified/supported on Linux 6.x - Oracle&reg; Database - if you are using 11.2.0.1 or 11.2.0.2, then you will need to use Linux 5.x
HTH
Srini

Hi i insttalled the free trial 3O days MacScan on OsX10.5 is it normal that for full scaning it takes so long time more even than one day?! on the other hand this application hasn't any uninstaller on image disc ,so how can i uninstal it from my hard?

Hi i insttalled the free trial 3O days MacScan on OsX10.5 is it normal that for full scaning it takes so long time more even than one day?! on the other hand this application hasn't any uninstaller on image disc ,so how can i uninstal it from my hard?Thanks

Get rid of the tracking cookies. They are used to profile and track your browsing history. While they are privacy invading, by calling them spyware, MacScan is being a little dramatic in trying to sell you its crap. And in the future, for whatever browser you use, don't allow third-party cookies.
To prevent tracking, get Ghostery. In addition to having Ghostery and forbidding third-party cookies, I clear out all cookies from one browsing session to another. If you always do that, you won't have any tracking cookies to worry about, so you won't need MacScan to find them for you. Btw, MacScan finds the tracking cookies in the first few minutes of scanning; if you want to use it for that, then that's all the time you need to run it for. But, as I said, you won't have any tracking cookies around if you just remove all cookies and don't allow third-party cookies. As soon as you visit a site that needs them, you'll just get new ones. No problem.
Read all about cookies here.
http://en.wikipedia.org/wiki/HTTP_cookie

Why it takes long time to execute on Production than staging?

Hi Experts,
Any help apreciated on below issue.
I have one anonymous block for updating around 1 million records by joining 9 tables.
This is proceeded to production by following environments. And all env have exact equal volume of data.
development->Testing->Staging->Production.
The funny problem is while it takes 5 mins to be executed in all environments, it takes 30 mins on production.
why it happned and what can be action points for future?
Thanks
-J
==============
If the performance is that different in the different environments, one or more statements must have different query plans in the different environments. The first step would be to get the query plans and compare them to figure out which statement(s) is/are running slowly.
If there are different query plans, that implies that something is different between the environments. That could be any of
- Oracle version
- initialization parameters
- data
- object statistics
- system statistics
If you guarantee that the data is the same, I would tend to expect that the object statistics are different. How have you gathered statistics in the various environments? Can you move statistics from an environment where performance is acceptable to the environment where performance is unacceptable?
I would also recommend following the advice others have given you. You don't want to commit in a loop and you want to do as much processing in SQL as possible.
Justin
===============
Thanks Steve for your inputs.
My investigation resulted following 2 points.
There are 2 main reasons why some scripts might take longer in live than on Staging.
1: Weekend backups were running on the live server so slowing the server down allot.
2: the tables are re-orged when they are imported into staging/Dev – so the table and index layout is optimal, on live the tables and indexes are not necessarily contiguous so in order to do the same work the server will need to do many more I/O operations.
Can we have some action points to address these above issues?
I think if data can be contigous then it may help.
Best Regards
-J
===============
But before that, can you raise this in a seperate thread as there is a different issue going on in this thread?
Cheers
Sarma.
===========
Posts: 4
Registered: 08/28/06
Re: Performance issue (Oracle 10.2.0.3.0)
Posted: May 22, 2009 2:46 AM in response to: Radhakrishna Sa... Edit Reply
Hey Sarma,
Exterme aplogies to say that I don't know how to raise a new thread.
Thanks in advnce for your help.
-J
user636482
Posts: 202
Registered: 05/15/08
Re: Performance issue (Oracle 10.2.0.3.0)
Posted: May 22, 2009 2:51 AM in response to: user527345 Reply
Hi User 527345,
Please follow the steps to raise a request in this Forum.
1. Register urself.
2. Go to the forum home and select the Technolgy where do you want to rasie a request.
eg : If is related to Oracle DATAbase general then select Oracle databse general...
3. clik on post new thread
4. Give the summary of your issue.
5. then submit the issue.
please let me know if you need more information.
Thank you

Jayashree Mohanty wrote:
My investigation resulted following 2 points.
There are 2 main reasons why some scripts might take longer in live than on Staging.
1: Weekend backups were running on the live server so slowing the server down allot.
2: the tables are re-orged when they are imported into staging/Dev – so the table and index layout is optimal, on live the tables and indexes are not necessarily contiguous so in order to do the same work the server will need to do many more I/O operations.
Can we have some action points to address these above issues?
I think if data can be contigous then it may help.First , I didn't get at all what actually was that thing when you copied some part of don't know which post in your actual question? Please read this , it would help you post a proper question to get a proper answer ,
http://www.catb.org/~esr/faqs/smart-questions.html
Now, how did you come to the conclusion that the backups are actually making your query slower? What's the benchmark that you lead to this? And what's the meaning of the 2nd point , can you please explain it ?
As others have also mentioned, please post the plan of the query at boththe staging and production, that only can tell that what's going on.
HTH
Aman....

Why update query takes long time ?

Hello everyone;
My update query takes long time. In emp ( self testing) just having 2 records.
when i issue update query , it takes long time;
SQL> select * from emp;
EID ENAME     EQUAL     ESALARY     ECITY    EPERK       ECONTACT_NO
      2   rose              mca                  22000   calacutta                   9999999999
      1   sona             msc                  17280    pune                          9999999999
Elapsed: 00:00:00.05
SQL> update emp set esalary=12000 where eid='1';
update emp set esalary=12000 where eid='1'
* ERROR at line 1:
ORA-01013: user requested cancel of current operation
Elapsed: 00:01:11.72
SQL> update emp set esalary=15000;
update emp set esalary=15000
* ERROR at line 1:
ORA-01013: user requested cancel of current operation
Elapsed: 00:02:22.27

Hi BCV;
Thanks for your reply but it doesn't provide output, please see   this.
SQL> update emp set esalary=15000;
........... Lock already occured.
>> trying to trace >>
SQL> select HOLDING_SESSION from dba_blockers;
HOLDING_SESSION
            144
SQL> select sid , username, event from v$session where username='HR';
SID USERNAME     EVENT
   144   HR    SQL*Net message from client
   151   HR    enq: TX - row lock contention
   159   HR    SQL*Net message from client
>> It does n 't provide clear output about transaction lock >>
SQL> SELECT username, v$lock.SID, TRUNC (id1 / POWER (2, 16)) rbs,
2 BITAND (id1, TO_NUMBER ('ffff', 'xxxx')) + 0 slot, id2 seq, lmode,
3 request
4 FROM v$lock, v$session
5 WHERE v$lock.TYPE = 'TX'
6 AND v$lock.SID = v$session.SID
7 AND v$session.username = USER;
no rows selected
SQL> select MACHINE from v$session where sid = :sid;
SP2-0552: Bind variable "SID" not declared.

SAINT/SPAM UPDATE takes longer time more than 12hours

Similar Messages

Maybe you are looking for