Sale a material for first time needs settings
hello All,
my user is gng to sale the material for the first time...It is exisable material...wht setting needs to be done prior to sales order and invoicing activities...
helpful solutions will be highly appreciated
Thanks
Nano SAP
hii
please refer this thread
MM Configuration
Rizz
Similar Messages
-
How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes? I need step by step instructions for first-time sync with ipad mini. Thanks.
If you synced it many times, you have to have a backup. It's just a question of how old that backup is now. When did you last sync?
First of all launch iTunes on your computer and go to Edit>Preferences>Devices. Do you see any backups for you iPad in that window? If so, how new is the newest backup? That will be the backup that you will want to use. But remember that if you use that backup and it is one month old, you can only restore from that date back in time. Anything that you did on the iPad in the past month will not be in that backup.
Turn on the new iPad Minin and start activating OTA via WiFi. You will get to a certain point in the process where you will be given the choice to Set up as new, Restore from iCloud - or Restore from iTunes. You will want to select Restore from iTunes.
That is the short and sweet version. There are step by step instructions in this article. This applies to the mini as well as the iPad 4 or the iPad 3 for that matter.
http://www.everythingicafe.com/how-to-set-up-new-ipad/2012/03/16/ -
Hi I forgot my security question how I can rest becouse I was going APP this massage pop of in the app page I benn buying app in this iPod may time they are say for first time you are buying apps in iPod pls I need your help to resist my security question
The Three Best Alternatives for Security Questions and Rescue Mail
1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID. -
When itunes load for first time ,the ios operating system load automatically?
I connect my ipod for first time ,and download itunes, but an operating system doesnt show in settings /general/ doesnt appears software??
can somebody tell me what to do ? or if my ipod may be is not working properly? and any time I try to download an apps , read need ios5.What then does show?
Did you setup/activate the iPod? You have to do that via wifi (for newer ones) or conneft to iTunes and restore
iTunes: Restoring iOS software -
if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in America?
please i need help, im worried that if I connect my ipod here, it will burn or sometihng bad.Just connect it to a computer's USB port.
Most wall chargers are dual voltage (110- 220 volts) and only require a plug adopter. Check the wall charger to see if yours is. -
Performance issue in browsing SSAS cube using Excel for first time after cube refresh
Hello Group Members,
This is a continuation of my earlier blog question -
https://social.msdn.microsoft.com/Forums/en-US/a1e424a2-f102-4165-a597-f464cf03ebb5/cache-and-performance-issue-in-browsing-ssas-cube-using-excel-for-first-time?forum=sqlanalysisservices
As that thread is marked as answer, but my issue is not resolved, I am creating a new thread.
I am facing a cache and performance issue for the first time when I try to open a SSAS cube connection using Excel (using Data tab -> From Other Sources --> From Analysis Services) after daily cube refresh. In end users system (8 GB RAM but around
4GB available RAM), for the first time, it takes 10 minutes to open the cube. From next run onwards, its open up quickly within 10 secs.
We have daily ETL process running in high end servers. The configuration of dedicated SSAS cube server is 8 core, 64GB RAM. In total we have 4 cube DB - out of which for 3 is full cube refresh and 1 is incremental refresh. We have seen after daily cube
refresh, it takes 10 odd minutes to open the cube in end users system. From next time onwards, it opens up really fast with 10 secs. After cube refresh, in server systems (32 GB RAM, around 4GB available RAM), it takes 2 odd minutes to open the cube.
Is there, any way we could reduce the time taken for first attempt ?
As mentioned in my previous thread, we have already implemented a cube wraming cache. But, there is no improvement.
Currently, the cumulative size of the all 4 cube DB are more than 9 GB in Production and each cube DB having 4 individual cubes in average with highest cube DB size is 3.5 GB. Now, the question is how excel works with SSAS cube after
daily cube refresh?
Is it Excel creates a cache of the schema and data after each time cube is refreshed and in doing so it need to download the cube schema in Excel's memory? Now to download the the schema and data of each cube database from server to client, it will take
a significant time based on the bandwidth of the network and connection.
Is it anyway dependent to client system RAM ? Today the bigest cube DB size is 3.5 GB, tomorrow it will be 5-6 GB. Now, though client system RAM is 8 GB, the available or free RAM would be around 4 GB. So, what will happen then ?
Best Regards, Arka Mitra.Could you run the following two DMV queries filling in the name of the cube you're connecting to. Then please post back the row count returned from each of them (by copying them into Excel and counting the rows).
I want to see if this is an issue I've run across before with thousands of dimension attributes and MDSCHEMA_CUBES performance.
select [HIERARCHY_UNIQUE_NAME]
from $system.mdschema_hierarchies
where CUBE_NAME = 'YourCubeName'
select [LEVEL_UNIQUE_NAME]
from $system.mdschema_levels
where CUBE_NAME = 'YourCubeName'
Also, what version of Analysis Services is it? If you connect Object Explorer in Management Studio to SSAS, what's the exact version number it says on the top server node?
http://artisconsulting.com/Blogs/GregGalloway -
ADF application taking more time for first time and less from second time
Hi Experts,
We are using ADF 11.1.1.2.
Our application contains 5 jsp pages, 10 - 12 taskflows, and 50 jsff pages.
For the first time in the day if we use the application it is taking more than 60 sec on some actions.
And from the next time onwords it is taking 5 to 6 sec.
Same thing is happening daily.
Can any one tell me why this application is taking more time for first time and less time from second time.
Regards
GayazHi,
If you don't restart you WLS every day, then you should read about Tuning Application Module Pools and Connection Pools
http://docs.oracle.com/cd/E15523_01/web.1111/b31974/bcampool.htm#sm0301
And pay attention to the parameter: Maximum Available Size, Minimum Available Size
http://docs.oracle.com/cd/E15523_01/web.1111/b31974/bcampool.htm#sm0314
And adjust them to suit your needs. -
How to disable chanllenging questions while user log in for first time
Hi All,
How to disable challenging questions while user log in for first time in OIM 10g and OIM 11g
also i need to know how to change the Oracle logo with custom logo in both versionsIn 11G:
To disable challenge questions at start up: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e14308/system_props.htm#BABBDCJH (System Property Named: "Force to set question at start up)
To change logo: http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14309/uicust.htm#CHDIFJEJ
In 10G:
Dig the documentation.
A suggestion, please go through the documents first as they have quite a bit of information.
HTH,
BB -
Computer keeps Configuring and setting up for first time use
I have a toshiba A505-S6980 that has been working fine for a couple years. Recently I had performance issues and suspected virus, spyware so I did a recovery with the original discs I made when I first got the computer. Four of the six discs reloaded fine. It did not ask for the last two discs "Environment 64 bit and Applications and Drives. I also have a System Repair disc. After loading the four recovery discs the computer now keeps recycling between preparing for first time use, configuring system, reboot and then back to preparing for first time use,etc. I think I'm close to getting this, but need a last bit of help.
ThanksIt's been a couple days since you posted this problem. Did you get anywhere, or are you still stuck in that loop? If it's still stuck, you may just want to perform the recovery again.
- Peter -
SQL Server Management Studio - Configuring the environment for first time use
Hi
I have recently switched my local 'My Documents' folder location to a network drive that I 'make available off line' to allow on-line/off-line work and synchronisation when I am working in and out of the office.
When I load my SQL Server Management Studio 2005 I frequently get 'Microsoft SQL Server Management Studio is configuring the environment for first time use'.
Management Studio them loads and I can continue without problem.
I am guessing it is trying to make reference to some settings file. Any ideas? I wonder if I can change/move these settings elsewhere to a local drive?
ThanksHi,
There is bug report of this issue:
http://connect.microsoft.com/SQLServer/feedback/details/126364/configuring-enviroment-for-the-first-time-every-time-in-ms-sql-server-management-express
"SQL Server Management Studio Express saves the settings for the user in ...\Documents and Settings\<User Profile>\Local Settings\Application Data\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM
and in ...\Documents and Settings\<user profile>\Application Data\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM
if any of these files are not available or unusable, SSMSE will generate new ones."
Hope this helps.
BR,
JoukoK -
HT5312 I'm trying to buy iTunes for first time, but can't verify security questions.
I'm trying to buy iTunes for first time and can't answer security questions.
<Personal Information Edited by Host>The page that you posted from has instructions for how to reset them i.e. if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 half-way down that page should give you a reset link.
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset (these are user-to-user forums).
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use -
when i want to purcahase for first time on itune,,it said this ID have never been used on itune .how can i use my ID to purchase it if this is my first time?
Hi Zannat,
Don't get scared. Cookies are the small file which stores your settings for a website, such as location details, login details, language details and so..
Some sites don't care about your cookies settings but some other sites instructs you to enable cookies in your browser. Enabling cookies is too easy.
Just follow the instructions which explained [[Enable and disable cookies that websites use to track your preferences |here]] .
Thank you!!! -
HT1178 I'm setting up airport for first time. I'm getting error no DNS servers help
I'm setting up airport for first time. Getting error no DNS servers. What is DNS server and how do I fix this?
DNS server is that translation from a website address in words meaningful to us.. eg www.google.com to an actual number that computers can use. Without DNS the internet may work but you would have to know the ipv4 address of every site you want to visit.
Whenever you don't know the meaning of a term just type wiki plus the term in google search.
http://en.wikipedia.org/wiki/Domain_Name_System
We cannot really help fix the problem without knowing a good deal more info.
So
What modem do you have.. make and model may be a help?
Who is your ISP.. may be helpful??
Is the modem also a router?
How is the TC connected to the modem?
How is the computer connected to the TC?
A primary example of where you get this problem is a pure cable modem.. ie has no router in it.
When you replace an existing computer or router that is plugged into it, with the TC, requires that you power cycle the modem. In some cases the off time is 5min.. for a lot of services, it needs to be off 20min.. and for some even longer.. maybe an hour or overnight.
But it is not worth getting into specifics without knowing the rest of the system. -
Long time to open workbook for first time
Hi,
I have a workbook with three queries . Performance of workbook is good when it was created for first time. It has additional 22 sheets with formulas and other sheets with values based on query sheets.
The problem starts after I close the existing session and open in another session when it takes 15 to 20 minutes to come up.But after that the book is slow even for single click button action.
Version of analysis 1.4.6
Win 7(64 bit)
Ms office 2010(32 bit)
Refresh on opening is disabled.
Few thing which I did:
>> I opened up task manager and did analyze wait chain, I found that excel.exe is waiting for splwow64.exe process.
>> I enabled logging at "debugging information" in support setting for workbook and checked things out in log file.
Found that
There was warning "AddSerializer failed (Command processors not initialized)
Looking at log file for events when book took time to open, I found that time stamp gap between following events"
-verbose: Working mode as serialized in document:'Local'
-verbose: Successfully deserialized system info from workbook XML
- verbose: ...its logs various properties of queries like query name,id etc"
and its immediate previous event of cache formula string is 20 mins.
>> in another session I opened a workbook with normal performance.Found above mentioned warning message and deserialization... information.
the difference in this case is that there is not delay in events.
Has anybody faced this issue? Any idea on deserialization of workbook xml in analysis.
Any idea where is metadata saved in analysis. is it in form of some hidden script object just as in BEx 7.0
Thanks
Pramod.Hi Pramod,
Since you have several sheets in this workbook, have you checked the number of custom styles?
Please check the SAP note http://service.sap.com/sap/support/notes/1899658
According to the note, too many styles slow down Analysis for Office.
The note also contains a macro that you can run on your workbook to delete the custom styles if you want to check.
Regards,
Filipe -
i am using for first time the time machine and an external hard drive because I want to erase my macbook and start from zero files. Am i keeping my files in the portable hard disk when I will connect it again with the macbook or the time machine will erase all?
I would like to know if after I erase all my data, empy hard drive inside the macbook, the time machine will erase all my files that I have saved in my "WD "My passport" external hard driveWelcome to Apple Support Communities
Time Machine has to erase the external disk in order to make backups. Before setting Time Machine up, copy the files of your external disk to the hard disk of the Mac in order not to lose them, and then, set up Time Machine. The first backup will start automatically.
If you want more information about Time Machine, read the Pondini's site > http://pondini.org
Maybe you are looking for
-
Automator Open Finder Items Won't Work in Plug-In
I'm having another Automator problem in Leopard. This time I have a workflow that is intended to combine PDFs selected in Finder and open the resulting document in Preview. The steps are: 1. Get Selected Items 2. Combine PDF Pages, Combine by appendi
-
HT201263 how do i reset a passcode that i forgot on an ipod touch
How do I reset a passcode if I forgot the original passcode on an ipod touch
-
No smooth Blu-Ray transitions...
hi all! this problem is nearly driving me crazy: i use encore cs3 and want to have transitions between my menu and the clips (e.g. static menu -> button pressed -> transition (menu items fade out) -> video clip). i used the transition feature but i a
-
Validating xml input against schema's registered in database
Hi, We have an application that stores a massive XSD document (with cyclical references between schemas) in a VARCHAR2 column of a table. The XSD is loaded everytime an xml input needs to be parsed. The problem is that the XSD is very huge, and maint
-
Hi all I have written an application that I am trying to make faster. It took approx 10seconds to completely execute and by simply passing a connection to all the methods reduced it to 6-7 seconds, while this is a decent improvement I want to get thi