SALE ORDER CREATION WITH LSMW
Hi
Can we upload open sales orders through ..LSMW ...if it is posible ..pls tell me procedure
In LSMW Steps recording step .. can we tcode VA01...?
REGARDS
SESIDHAR
Hi
Check this link
[Sales order uploading through LSMW;
And there is nothing like that you can upload only Master Data through LSMW. Once you are able to handle LSMW you can upload any data in SAP. Yes, there may be some constraints, but an expert can manage.
So go ahead.
Regards
Amitesh Anand
Similar Messages
-
Create ecatt script for one sales order creation with multiple line items
Hi ,
I want to create a ecatt script for one sales order creation with multiple line items. Preferably SAP GUI.
This selection of data will be from an external file/ variants which will have only one row of data in it.
Firstly: I have to sort the external file having same PO Numbers in an order.Group them together.
Second: I have to create sales order for those many line items having same PO Number.
Best Regard
TaranumHi Micky
Firstl you should upload the Line items for a particular sales Order in an Internal table
and then pass that internal table to your BAPI during your coding corresponding to a particu;lar sales order
In case of any issues pls revert back
Reward points if helpful
Regards
Hitesh -
Sales order creation using LSMW
Hi All,
I am creating open sales order (VA01) using LSMW where I am using BAPI: BUS2032 and Method CREATEFROMDAT2.
I need to pass multiple line items for the same Header data, but the LSMW is creating multiple sales orders with a single line item every time.
I tried giving "on_change_transfer_record" after Header record but that doesn't work.
Can anyone suggest any suitable solution for this using BAPI only other than BDC, report program etc.
Thanks in Advance
Asif Ali KhanHi Asif Khan,
Please check this link
BAPI_SALESORDER_CREATEFROMDAT2 - Sales Order Create
http://sap-img.com/abap/bapi-salesorder-createfromdat2.htm
Best regards,
raam -
Sales Order Creation with reference to Contract
Hi all ,
Existing Setup in the System:
1) I have a contract created with a validity period of 30 days. When i create sales order with reference to contract, then i get a pop-up box, from the box i can select my contract.
2) I have a Lead time configured as 5 days for the Sales document type , I,e when I create sales order I can see my Requested delivery date is always system date + 5 days.
3) I have a Pricing date configured as Todays date. Therefore when I create sales order I can see pricing date becomes the system date.
Execution of Sales Order:
4) When I create Sales Order with reference to contract document. Always Requested Delivery date is compared with Contract Validity Dates.
Example: Contract Validity 01/03/2008 - 31/03/2008
Sales Order: Sales Order Creation date -> 19/03/2008, Pricing Date: 19/03/2008 Requested delivery date 24/03/2008.
REQUIREMENT IS:
But my requirement is when i create Sales Order it should consider System date or Pricing Date( since pricing date is today date) for to compare with contract validity dates.
Can it be done with standard config or do we need to some type of custom? Appreciate your help
ThanksHi ,
As said when I create Sales Order with reference to contract document. Always Requested Delivery date on Sales Order is checked against Contract Validity Dates.
But i want Pricing date in Sales Order should be checked against Contract Validity Dates.
Can someone suggest me on this? -
Sales order creation with respect to contracts
Hi Guys,
I am trying to create a saleorders with referece to contract for which in the background I configured so that during my sales order creation I see the pop-up box with all existing contracts for a specified sold-to party.
This process is so painful that order entry people have to manually select from the big list (pop up box consisting of huge list).
Is there any way so that I can automate this process insetead of selecting contracts from that list.
Regards
KrishnaHi Ravi,
Thanks for your solution and could you please give me some more details what is the neame of the user exit.
and welcome for some more suggestions.
Thanks
Krishna
One way is to create the order with reference to the Contract and then the system will not give the pop up for the existing contracts.
The other way to automate the process is by using a userexit. Here the system should check all the existing valid contracts for this sold to party and should select the oldest or latest valid contract, as per the client choice.
Thanks,
Ravi -
Sales order creation with bapi in webdynpro using table control
When i use table control to update the line items only first row is getting updated in the sale order creation and the loop is not updating the other row to header only the first row is getting saved, for the same set of data sale order is getting created in va01 for multiple line items. Pls give me some idea to resolve this issue, here is the code i am using for creating sale order using bapi 'BAPI_SALESORDER_CREATEFROMDAT2' method CREATE_SALES_ORDER .
Declaration for Order Header Node DATA: node_order_header TYPE REF TO if_wd_context_node, elem_order_header TYPE REF TO if_wd_context_element, stru_order_header TYPE if_componentcontroller=>element_order_header . * Declaration for Order Items Node DATA: node_order_items TYPE REF TO if_wd_context_node, elem_order_items TYPE REF TO if_wd_context_element, stru_order_items TYPE if_componentcontroller=>element_order_items . * Declaration for Order Partners Node DATA: node_order_partners TYPE REF TO if_wd_context_node, elem_order_partners TYPE REF TO if_wd_context_element, stru_order_partners TYPE if_componentcontroller=>element_order_partners . node_order_header = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_header ). elem_order_header = node_order_header->get_element( ). elem_order_header->get_static_attributes( IMPORTING static_attributes = stru_order_header ). * via lead selection node_order_items = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_items ). elem_order_items = node_order_items->get_element( ). elem_order_items->get_static_attributes( IMPORTING static_attributes = stru_order_items ). * via lead selection node_order_partners = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_partners ). elem_order_partners = node_order_partners->get_element( ). elem_order_partners->get_static_attributes( IMPORTING static_attributes = stru_order_partners ). DATA: v_sales_doc TYPE bapivbeln-vbeln. DATA: w_order_header_in TYPE bapisdhd1, i_order_header_in TYPE table of bapisdhd1," i_order_partners TYPE TABLE OF bapiparnr, w_order_partners TYPE bapiparnr, i_return TYPE TABLE OF bapiret2, w_return TYPE bapiret2, i_order_items_in TYPE TABLE OF bapisditm, w_order_items_in TYPE bapisditm, i_order_conditions_in TYPE TABLE OF bapicond, w_order_conditions_in TYPE bapicond, w_order_SCHDL type BAPISCHDL, i_order_SCHDL type table of BAPISCHDL. * Order Header Details CLEAR: w_order_header_in, i_order_partners, i_return, i_order_items_in, i_order_conditions_in, w_order_SCHDL, i_order_SCHDL. refresh : i_order_partners, i_return, i_order_items_in, i_order_conditions_in, i_order_SCHDL. w_order_header_in-doc_type = stru_order_header-doc_type. w_order_header_in-sales_org = stru_order_header-sales_org. w_order_header_in-distr_chan = stru_order_header-distr_chan. w_order_header_in-division = stru_order_header-division. w_order_header_in-req_date_h = stru_order_header-req_date_h. w_order_header_in-sales_dist = stru_order_header-sales_dist. w_order_header_in-purch_no_c = stru_order_header-purch_no_c. * Order Item Details CLEAR: i_order_items_in,w_order_items_in. * w_order_items_in-itm_num = stru_order_items-itm_num. w_order_items_in-ITM_NUMBER = stru_order_items-ITM_NUMBER. w_order_items_in-material = stru_order_items-material. w_order_items_in-target_qty = stru_order_items-target_qty."'5'. w_order_items_in-target_qu = stru_order_items-target_qu."'5'. w_order_items_in-plant = stru_order_items-plant. w_order_items_in-target_val = stru_order_items-target_val. w_order_items_in-currency = stru_order_items-currency. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_items_in-material IMPORTING output = w_order_items_in-material. APPEND w_order_items_in TO i_order_items_in. * Order Partner Details CLEAR: i_order_partners,w_order_partners. w_order_partners-partn_role = stru_order_partners-partn_role. w_order_partners-partn_numb = stru_order_partners-partn_numb. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_partners-partn_numb IMPORTING output = w_order_partners-partn_numb. APPEND w_order_partners TO i_order_partners. * Order Condition Details w_order_SCHDL-ITM_NUMBER = stru_order_items-itm_number." '000010'. w_order_SCHDL-req_qty = stru_order_items-target_qty." '5'. APPEND w_order_SCHDL to i_order_SCHDL. * Create Sales Order BAPI Call *loop at i_order_header_in into w_order_header_in. CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2' EXPORTING order_header_in = w_order_header_in IMPORTING salesdocument = v_sales_doc TABLES return = i_return order_items_in = i_order_items_in order_partners = i_order_partners order_schedules_in = i_order_SCHDL order_conditions_in = i_order_conditions_in. * Get message manager DATA: l_current_controller TYPE REF TO if_wd_controller, l_message_manager TYPE REF TO if_wd_message_manager. l_current_controller ?= wd_this->wd_get_api( ). CALL METHOD l_current_controller->get_message_manager RECEIVING message_manager = l_message_manager. DATA: v_message_text TYPE string. * When Sales Order is created commit the data IF NOT v_sales_doc IS INITIAL. CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' EXPORTING wait = 'X'. CONCATENATE 'Sales Document' v_sales_doc 'has been created.' INTO v_message_text SEPARATED BY space. * Report Success message CALL METHOD l_message_manager->report_success EXPORTING message_text = v_message_text. ELSE. v_message_text = 'Error Creating Sales Order'. * Report Error message CALL METHOD l_message_manager->report_error_message EXPORTING message_text = v_message_text. ENDIF. *endloop. endmethod. and code for table control i am using is method WDDOINIT . Types : Begin of item_tab, itm_number type bapisditm-itm_number, material type bapisditm-material, plant type bapisditm-plant , target_qty type bapisditm-target_qty, target_qu type bapisditm-target_qu, target_val type bapisditm-target_val, currency type bapisditm-currency, end of item_tab. *Creating internal table and Work Area of the same structure *as that of the Node created. Data : it_item type standard table of item_tab, wa_item type item_tab. *Appending Blank Work Area to Internal table. ***********************************************888 *LOOP AT it_item INTO wa_item. **wa_item-itm_number to bapisditm-itm_number. **wa_item-material to bapisditm-material. **wa_item-plant to bapisditm-plant. **wa_item-target_qty to bapisditm-target_qty. **wa_item-target_qu to bapisditm-target_qu. **wa_item-target_val to bapisditm-target_val. **wa_item-currency to bapisditm-currency. ** * APPEND wa_item TO it_item. *ENDLOOP. **********************************************88 ******** Do 10 times. Append wa_item to it_item. enddo. ********* "Binding the table DATA lo_nd_order_items TYPE REF TO if_wd_context_node. * DATA lt_material TYPE wd_this->Elements_material. * navigate from to via lead selection lo_nd_order_items = wd_context->get_child_node( name = wd_this->wdctx_order_items ). * @TODO handle non existant child * IF lo_nd_material IS INITIAL. * ENDIF. ** @TODO compute values ** e.g. call a model function * lo_nd_order_items->bind_table( new_items = it_item set_initial_elements = abap_true ). endmethod.DATA: node_order_header TYPE REF TO if_wd_context_node, elem_order_header TYPE REF TO if_wd_context_element, stru_order_header TYPE if_componentcontroller=>element_order_header . * Declaration for Order Items Node DATA: node_order_items TYPE REF TO if_wd_context_node, elem_order_items TYPE REF TO if_wd_context_element, stru_order_items TYPE if_componentcontroller=>element_order_items . * Declaration for Order Partners Node DATA: node_order_partners TYPE REF TO if_wd_context_node, elem_order_partners TYPE REF TO if_wd_context_element, stru_order_partners TYPE if_componentcontroller=>element_order_partners . node_order_header = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_header ). elem_order_header = node_order_header->get_element( ). elem_order_header->get_static_attributes( IMPORTING static_attributes = stru_order_header ). * via lead selection node_order_items = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_items ). elem_order_items = node_order_items->get_element( ). elem_order_items->get_static_attributes( IMPORTING static_attributes = stru_order_items ). * via lead selection node_order_partners = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_partners ). elem_order_partners = node_order_partners->get_element( ). elem_order_partners->get_static_attributes( IMPORTING static_attributes = stru_order_partners ). DATA: v_sales_doc TYPE bapivbeln-vbeln. DATA: w_order_header_in TYPE bapisdhd1, i_order_header_in TYPE table of bapisdhd1," i_order_partners TYPE TABLE OF bapiparnr, w_order_partners TYPE bapiparnr, i_return TYPE TABLE OF bapiret2, w_return TYPE bapiret2, i_order_items_in TYPE TABLE OF bapisditm, w_order_items_in TYPE bapisditm, i_order_conditions_in TYPE TABLE OF bapicond, w_order_conditions_in TYPE bapicond, w_order_SCHDL type BAPISCHDL, i_order_SCHDL type table of BAPISCHDL. * Order Header Details CLEAR: w_order_header_in, i_order_partners, i_return, i_order_items_in, i_order_conditions_in, w_order_SCHDL, i_order_SCHDL. refresh : i_order_partners, i_return, i_order_items_in, i_order_conditions_in, i_order_SCHDL. w_order_header_in-doc_type = stru_order_header-doc_type. w_order_header_in-sales_org = stru_order_header-sales_org. w_order_header_in-distr_chan = stru_order_header-distr_chan. w_order_header_in-division = stru_order_header-division. w_order_header_in-req_date_h = stru_order_header-req_date_h. w_order_header_in-sales_dist = stru_order_header-sales_dist. w_order_header_in-purch_no_c = stru_order_header-purch_no_c. * Order Item Details CLEAR: i_order_items_in,w_order_items_in. * w_order_items_in-itm_num = stru_order_items-itm_num. w_order_items_in-ITM_NUMBER = stru_order_items-ITM_NUMBER. w_order_items_in-material = stru_order_items-material. w_order_items_in-target_qty = stru_order_items-target_qty."'5'. w_order_items_in-target_qu = stru_order_items-target_qu."'5'. w_order_items_in-plant = stru_order_items-plant. w_order_items_in-target_val = stru_order_items-target_val. w_order_items_in-currency = stru_order_items-currency. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_items_in-material IMPORTING output = w_order_items_in-material. APPEND w_order_items_in TO i_order_items_in. * Order Partner Details CLEAR: i_order_partners,w_order_partners. w_order_partners-partn_role = stru_order_partners-partn_role. w_order_partners-partn_numb = stru_order_partners-partn_numb. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_partners-partn_numb IMPORTING output = w_order_partners-partn_numb. APPEND w_order_partners TO i_order_partners. * Order Condition Details w_order_SCHDL-ITM_NUMBER = stru_order_items-itm_number." '000010'. w_order_SCHDL-req_qty = stru_order_items-target_qty." '5'. APPEND w_order_SCHDL to i_order_SCHDL. * Create Sales Order BAPI Call *loop at i_order_header_in into w_order_header_in. CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2' EXPORTING order_header_in = w_order_header_in IMPORTING salesdocument = v_sales_doc TABLES return = i_return order_items_in = i_order_items_in order_partners = i_order_partners order_schedules_in = i_order_SCHDL order_conditions_in = i_order_conditions_in. * Get message manager DATA: l_current_controller TYPE REF TO if_wd_controller, l_message_manager TYPE REF TO if_wd_message_manager. l_current_controller ?= wd_this->wd_get_api( ). CALL METHOD l_current_controller->get_message_manager RECEIVING message_manager = l_message_manager. DATA: v_message_text TYPE string. * When Sales Order is created commit the data IF NOT v_sales_doc IS INITIAL. CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' EXPORTING wait = 'X'. CONCATENATE 'Sales Document' v_sales_doc 'has been created.' INTO v_message_text SEPARATED BY space. * Report Success message CALL METHOD l_message_manager->report_success EXPORTING message_text = v_message_text. ELSE. v_message_text = 'Error Creating Sales Order'. * Report Error message CALL METHOD l_message_manager->report_error_message EXPORTING message_text = v_message_text. ENDIF. *endloop. endmethod. and code for table control i am using is method WDDOINIT . Types : Begin of item_tab, itm_number type bapisditm-itm_number, material type bapisditm-material, plant type bapisditm-plant , target_qty type bapisditm-target_qty, target_qu type bapisditm-target_qu, target_val type bapisditm-target_val, currency type bapisditm-currency, end of item_tab. *Creating internal table and Work Area of the same structure *as that of the Node created. Data : it_item type standard table of item_tab, wa_item type item_tab. *Appending Blank Work Area to Internal table. ***********************************************888 *LOOP AT it_item INTO wa_item. **wa_item-itm_number to bapisditm-itm_number. **wa_item-material to bapisditm-material. **wa_item-plant to bapisditm-plant. **wa_item-target_qty to bapisditm-target_qty. **wa_item-target_qu to bapisditm-target_qu. **wa_item-target_val to bapisditm-target_val. **wa_item-currency to bapisditm-currency. ** * APPEND wa_item TO it_item. *ENDLOOP. **********************************************88 ******** Do 10 times. Append wa_item to it_item. enddo. ********* "Binding the table DATA lo_nd_order_items TYPE REF TO if_wd_context_node. * DATA lt_material TYPE wd_this->Elements_material. * navigate from to via lead selection lo_nd_order_items = wd_context->get_child_node( name = wd_this->wdctx_order_items ). * @TODO handle non existant child * IF lo_nd_material IS INITIAL. * ENDIF. ** @TODO compute values ** e.g. call a model function * lo_nd_order_items->bind_table( new_items = it_item set_initial_elements = abap_true ). endmethod.
-
Sales order creation with bapi in webdynpro
When i use table control to update the line items only first row is getting updated in the sale order creation and the loop is not updating the other row to header only the first row is getting saved, for the same set of data sale order is getting created in va01 for multiple line items.
Pls give me some idea to resolve this issue,
here is the code i am using for creating sale order using bapi 'BAPI_SALESORDER_CREATEFROMDAT2'
method CREATE_SALES_ORDER .
Declaration for Order Header Node
DATA: node_order_header TYPE REF TO if_wd_context_node,
elem_order_header TYPE REF TO if_wd_context_element,
stru_order_header TYPE if_componentcontroller=>element_order_header .
Declaration for Order Items Node
DATA: node_order_items TYPE REF TO if_wd_context_node,
elem_order_items TYPE REF TO if_wd_context_element,
stru_order_items TYPE if_componentcontroller=>element_order_items .
Declaration for Order Partners Node
DATA: node_order_partners TYPE REF TO if_wd_context_node,
elem_order_partners TYPE REF TO if_wd_context_element,
stru_order_partners TYPE if_componentcontroller=>element_order_partners .
node_order_header = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_header
elem_order_header = node_order_header->get_element( ).
elem_order_header->get_static_attributes(
IMPORTING static_attributes = stru_order_header
<ORDER_ITEMS> via lead selection
node_order_items = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_items ).
elem_order_items = node_order_items->get_element( ).
elem_order_items->get_static_attributes(
IMPORTING static_attributes = stru_order_items ).
<ORDER_PARTNERS> via lead selection
node_order_partners = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_partners ).
elem_order_partners = node_order_partners->get_element( ).
elem_order_partners->get_static_attributes(
IMPORTING static_attributes = stru_order_partners ).
DATA: v_sales_doc TYPE bapivbeln-vbeln.
DATA: w_order_header_in TYPE bapisdhd1,
i_order_header_in TYPE table of bapisdhd1,"
i_order_partners TYPE TABLE OF bapiparnr,
w_order_partners TYPE bapiparnr,
i_return TYPE TABLE OF bapiret2,
w_return TYPE bapiret2,
i_order_items_in TYPE TABLE OF bapisditm,
w_order_items_in TYPE bapisditm,
i_order_conditions_in TYPE TABLE OF bapicond,
w_order_conditions_in TYPE bapicond,
w_order_SCHDL type BAPISCHDL,
i_order_SCHDL type table of BAPISCHDL.
Order Header Details
CLEAR: w_order_header_in, i_order_partners, i_return, i_order_items_in,
i_order_conditions_in, w_order_SCHDL, i_order_SCHDL.
refresh : i_order_partners, i_return, i_order_items_in,
i_order_conditions_in, i_order_SCHDL.
w_order_header_in-doc_type = stru_order_header-doc_type.
w_order_header_in-sales_org = stru_order_header-sales_org.
w_order_header_in-distr_chan = stru_order_header-distr_chan.
w_order_header_in-division = stru_order_header-division.
w_order_header_in-req_date_h = stru_order_header-req_date_h.
w_order_header_in-sales_dist = stru_order_header-sales_dist.
w_order_header_in-purch_no_c = stru_order_header-purch_no_c.
Order Item Details
CLEAR: i_order_items_in,w_order_items_in.
w_order_items_in-itm_num = stru_order_items-itm_num.
w_order_items_in-ITM_NUMBER = stru_order_items-ITM_NUMBER.
w_order_items_in-material = stru_order_items-material.
w_order_items_in-target_qty = stru_order_items-target_qty."'5'.
w_order_items_in-target_qu = stru_order_items-target_qu."'5'.
w_order_items_in-plant = stru_order_items-plant.
w_order_items_in-target_val = stru_order_items-target_val.
w_order_items_in-currency = stru_order_items-currency.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = w_order_items_in-material
IMPORTING output = w_order_items_in-material.
APPEND w_order_items_in TO i_order_items_in.
Order Partner Details
CLEAR: i_order_partners,w_order_partners.
w_order_partners-partn_role = stru_order_partners-partn_role.
w_order_partners-partn_numb = stru_order_partners-partn_numb.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING input = w_order_partners-partn_numb
IMPORTING output = w_order_partners-partn_numb.
APPEND w_order_partners TO i_order_partners.
Order Condition Details
w_order_SCHDL-ITM_NUMBER = stru_order_items-itm_number." '000010'.
w_order_SCHDL-req_qty = stru_order_items-target_qty." '5'.
APPEND w_order_SCHDL to i_order_SCHDL.
Create Sales Order BAPI Call
*loop at i_order_header_in into w_order_header_in.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
order_header_in = w_order_header_in
IMPORTING
salesdocument = v_sales_doc
TABLES
return = i_return
order_items_in = i_order_items_in
order_partners = i_order_partners
order_schedules_in = i_order_SCHDL
order_conditions_in = i_order_conditions_in.
Get message manager
DATA: l_current_controller TYPE REF TO if_wd_controller,
l_message_manager TYPE REF TO if_wd_message_manager.
l_current_controller ?= wd_this->wd_get_api( ).
CALL METHOD l_current_controller->get_message_manager
RECEIVING
message_manager = l_message_manager.
DATA: v_message_text TYPE string.
When Sales Order is created commit the data
IF NOT v_sales_doc IS INITIAL.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
CONCATENATE 'Sales Document' v_sales_doc 'has been created.'
INTO v_message_text SEPARATED BY space.
Report Success message
CALL METHOD l_message_manager->report_success
EXPORTING message_text = v_message_text.
ELSE.
v_message_text = 'Error Creating Sales Order'.
Report Error message
CALL METHOD l_message_manager->report_error_message
EXPORTING message_text = v_message_text.
ENDIF.
*endloop.
endmethod.
and code for table control i am using is
method WDDOINIT .
Types : Begin of item_tab,
itm_number type bapisditm-itm_number,
material type bapisditm-material,
plant type bapisditm-plant ,
target_qty type bapisditm-target_qty,
target_qu type bapisditm-target_qu,
target_val type bapisditm-target_val,
currency type bapisditm-currency,
end of item_tab.
*Creating internal table and Work Area of the same structure
*as that of the Node created.
Data : it_item type standard table of item_tab,
wa_item type item_tab.
*Appending Blank Work Area to Internal table.
***********************************************888
*LOOP AT it_item INTO wa_item.
**wa_item-itm_number to bapisditm-itm_number.
**wa_item-material to bapisditm-material.
**wa_item-plant to bapisditm-plant.
**wa_item-target_qty to bapisditm-target_qty.
**wa_item-target_qu to bapisditm-target_qu.
**wa_item-target_val to bapisditm-target_val.
**wa_item-currency to bapisditm-currency.
APPEND wa_item TO it_item.
*ENDLOOP.
**********************************************88
Do 10 times.
Append wa_item to it_item.
enddo.
"Binding the table
DATA lo_nd_order_items TYPE REF TO if_wd_context_node.
DATA lt_material TYPE wd_this->Elements_material.
navigate from <CONTEXT> to <MATERIAL> via lead selection
lo_nd_order_items = wd_context->get_child_node( name = wd_this->wdctx_order_items ).
@TODO handle non existant child
IF lo_nd_material IS INITIAL.
ENDIF.
@TODO compute values
e.g. call a model function
lo_nd_order_items->bind_table( new_items =
it_item set_initial_elements = abap_true ).
endmethod.When i use table control to update the line items only first row is getting updated in the sale order creation and the loop is not updating the other row to header only the first row is getting saved, for the same set of data sale order is getting created in va01 for multiple line items.
Pls give me some idea to resolve this issue,
here is the code i am using for creating sale order using bapi 'BAPI_SALESORDER_CREATEFROMDAT2'
method CREATE_SALES_ORDER .
Declaration for Order Header Node
DATA: node_order_header TYPE REF TO if_wd_context_node,
elem_order_header TYPE REF TO if_wd_context_element,
stru_order_header TYPE if_componentcontroller=>element_order_header .
Declaration for Order Items Node
DATA: node_order_items TYPE REF TO if_wd_context_node,
elem_order_items TYPE REF TO if_wd_context_element,
stru_order_items TYPE if_componentcontroller=>element_order_items .
Declaration for Order Partners Node
DATA: node_order_partners TYPE REF TO if_wd_context_node,
elem_order_partners TYPE REF TO if_wd_context_element,
stru_order_partners TYPE if_componentcontroller=>element_order_partners .
node_order_header = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_header
elem_order_header = node_order_header->get_element( ).
elem_order_header->get_static_attributes(
IMPORTING static_attributes = stru_order_header
<ORDER_ITEMS> via lead selection
node_order_items = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_items ).
elem_order_items = node_order_items->get_element( ).
elem_order_items->get_static_attributes(
IMPORTING static_attributes = stru_order_items ).
<ORDER_PARTNERS> via lead selection
node_order_partners = wd_context->get_child_node(
name = if_componentcontroller=>wdctx_order_partners ).
elem_order_partners = node_order_partners->get_element( ).
elem_order_partners->get_static_attributes(
IMPORTING static_attributes = stru_order_partners ).
DATA: v_sales_doc TYPE bapivbeln-vbeln.
DATA: w_order_header_in TYPE bapisdhd1,
i_order_header_in TYPE table of bapisdhd1,"
i_order_partners TYPE TABLE OF bapiparnr,
w_order_partners TYPE bapiparnr,
i_return TYPE TABLE OF bapiret2,
w_return TYPE bapiret2,
i_order_items_in TYPE TABLE OF bapisditm,
w_order_items_in TYPE bapisditm,
i_order_conditions_in TYPE TABLE OF bapicond,
w_order_conditions_in TYPE bapicond,
w_order_SCHDL type BAPISCHDL,
i_order_SCHDL type table of BAPISCHDL.
Order Header Details
CLEAR: w_order_header_in, i_order_partners, i_return, i_order_items_in,
i_order_conditions_in, w_order_SCHDL, i_order_SCHDL.
refresh : i_order_partners, i_return, i_order_items_in,
i_order_conditions_in, i_order_SCHDL.
w_order_header_in-doc_type = stru_order_header-doc_type.
w_order_header_in-sales_org = stru_order_header-sales_org.
w_order_header_in-distr_chan = stru_order_header-distr_chan.
w_order_header_in-division = stru_order_header-division.
w_order_header_in-req_date_h = stru_order_header-req_date_h.
w_order_header_in-sales_dist = stru_order_header-sales_dist.
w_order_header_in-purch_no_c = stru_order_header-purch_no_c.
Order Item Details
CLEAR: i_order_items_in,w_order_items_in.
w_order_items_in-itm_num = stru_order_items-itm_num.
w_order_items_in-ITM_NUMBER = stru_order_items-ITM_NUMBER.
w_order_items_in-material = stru_order_items-material.
w_order_items_in-target_qty = stru_order_items-target_qty."'5'.
w_order_items_in-target_qu = stru_order_items-target_qu."'5'.
w_order_items_in-plant = stru_order_items-plant.
w_order_items_in-target_val = stru_order_items-target_val.
w_order_items_in-currency = stru_order_items-currency.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = w_order_items_in-material
IMPORTING output = w_order_items_in-material.
APPEND w_order_items_in TO i_order_items_in.
Order Partner Details
CLEAR: i_order_partners,w_order_partners.
w_order_partners-partn_role = stru_order_partners-partn_role.
w_order_partners-partn_numb = stru_order_partners-partn_numb.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING input = w_order_partners-partn_numb
IMPORTING output = w_order_partners-partn_numb.
APPEND w_order_partners TO i_order_partners.
Order Condition Details
w_order_SCHDL-ITM_NUMBER = stru_order_items-itm_number." '000010'.
w_order_SCHDL-req_qty = stru_order_items-target_qty." '5'.
APPEND w_order_SCHDL to i_order_SCHDL.
Create Sales Order BAPI Call
*loop at i_order_header_in into w_order_header_in.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
order_header_in = w_order_header_in
IMPORTING
salesdocument = v_sales_doc
TABLES
return = i_return
order_items_in = i_order_items_in
order_partners = i_order_partners
order_schedules_in = i_order_SCHDL
order_conditions_in = i_order_conditions_in.
Get message manager
DATA: l_current_controller TYPE REF TO if_wd_controller,
l_message_manager TYPE REF TO if_wd_message_manager.
l_current_controller ?= wd_this->wd_get_api( ).
CALL METHOD l_current_controller->get_message_manager
RECEIVING
message_manager = l_message_manager.
DATA: v_message_text TYPE string.
When Sales Order is created commit the data
IF NOT v_sales_doc IS INITIAL.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
CONCATENATE 'Sales Document' v_sales_doc 'has been created.'
INTO v_message_text SEPARATED BY space.
Report Success message
CALL METHOD l_message_manager->report_success
EXPORTING message_text = v_message_text.
ELSE.
v_message_text = 'Error Creating Sales Order'.
Report Error message
CALL METHOD l_message_manager->report_error_message
EXPORTING message_text = v_message_text.
ENDIF.
*endloop.
endmethod.
and code for table control i am using is
method WDDOINIT .
Types : Begin of item_tab,
itm_number type bapisditm-itm_number,
material type bapisditm-material,
plant type bapisditm-plant ,
target_qty type bapisditm-target_qty,
target_qu type bapisditm-target_qu,
target_val type bapisditm-target_val,
currency type bapisditm-currency,
end of item_tab.
*Creating internal table and Work Area of the same structure
*as that of the Node created.
Data : it_item type standard table of item_tab,
wa_item type item_tab.
*Appending Blank Work Area to Internal table.
***********************************************888
*LOOP AT it_item INTO wa_item.
**wa_item-itm_number to bapisditm-itm_number.
**wa_item-material to bapisditm-material.
**wa_item-plant to bapisditm-plant.
**wa_item-target_qty to bapisditm-target_qty.
**wa_item-target_qu to bapisditm-target_qu.
**wa_item-target_val to bapisditm-target_val.
**wa_item-currency to bapisditm-currency.
APPEND wa_item TO it_item.
*ENDLOOP.
**********************************************88
Do 10 times.
Append wa_item to it_item.
enddo.
"Binding the table
DATA lo_nd_order_items TYPE REF TO if_wd_context_node.
DATA lt_material TYPE wd_this->Elements_material.
navigate from <CONTEXT> to <MATERIAL> via lead selection
lo_nd_order_items = wd_context->get_child_node( name = wd_this->wdctx_order_items ).
@TODO handle non existant child
IF lo_nd_material IS INITIAL.
ENDIF.
@TODO compute values
e.g. call a model function
lo_nd_order_items->bind_table( new_items =
it_item set_initial_elements = abap_true ).
endmethod. -
Sales Order Creation using LSMW IDOC method.. ( Custome Interface)
Hi ABAP'rs,
Please provide me LSMW steps for creating Sales Order using IDOC method.
Thanks and Regards,
Param.LSMW-IDOC in General
LSMW Step by Step Guide: Legacy System Migration Workbench is an R/3 Based tool for data transfer from legacy to R/3 for one time or periodic transfer.
Basic technique is Import data from Spreadsheet / Sequential file, convert from source format to target format and import into R/3 database. LSMW not part of standard R/3, if we need this product email [email protected]
Advantages of LSMW:
Most of the functions are within R/3, hence platform independence.
Quality and data consistency due to standard import techniques.
Data mapping and conversion rules are reusable across projects.
A variety of technical possibilities of data conversion.
Generation of the conversion program on the basis of defined rules
Interface for data in spreadsheet format.
Creation of data migration objects on the basis of recorded transactions.
Charge-free for SAP customers and partners.
Working With LSMW:
Use TCODE LSMW
Objects of LSMW:
Project ID with max of 10 char to Name the data transfer project.
Subproject Used as further structuring attribute.
Object ID with max of 10 Characters, to name the Business object .
Project can have multiple sub projects and subprojects can have multiple objects.
Project documentation displays any documentation maintained for individual pop ups and processing steps
User Guide: Clicking on Enter leads to interactive user guide which displays the Project name, sub project name and object to be created.
Object type and import techniques:
Standard Batch / Direct input.
Batch Input Recording
o If no standard programs available
o To reduce number of target fields.
o Only for fixed screen sequence.
BAPI
IDOC
o Settings and preparations needed for each project
Preparations for IDOC inbound processing:
Choose settings -> IDOC inbound processing in LSMW
Set up File port for file transfer, create port using WE21.
Additionally set up RFC port for submitting data packages directly to function module IDoc_Inbound_Asynchronous, without creating a file during data conversion.
Setup partner type (SAP recommended US) using WE44.
Maintain partner number using WE20.
Activate IDOC inbound processing.
Verify workflow customizing.
Steps in creating LSMW Project:
Maintain attributes choose the import method.
Maintain source structure/s with or without hierarchical relations. (Header, Detail)
Maintain source fields for the source structures. Possible field types C,N,X, date, amount and packed filed with decimal places.
Fields can be maintained individually or in table form or copy from other sources using upload from a text file
Maintain relationship between source and target structures.
Maintain Field mapping and conversion rules
For each Target field the following information is displayed:
o Field description
o Assigned source fields (if any)
o Rule type (fixed value, translation etc.)
o Coding.
o Some fields are preset by the system & are marked with Default setting.
Maintain Fixed values, translations, user defined routines Here reusable rules can be processed like assigning fixed values, translation definition etc.
Specify Files
o Legacy data location on PC / application server
o File for read data ( extension .lsm.read)
o File for converted data (extension .lsm.conv)
Assign Files to defined source structures
Read data Can process all the data or part of data by specifying from / to transaction numbers.
Display read data To verify the input data being read
Convert Data Data conversion happens here, if data conversion program is not up to date, it gets regenerated automatically.
Display converted data To verify the converted data
Import Data Based on the object type selected
Standard Batch input or Recording
o Generate Batch input session
o Run Batch input session
Standard Direct input session
o Direct input program or direct input transaction is called
BAPI / IDOC Technique:
IDOC creation
o Information packages from the converted data are stored on R/3 Database.
o system assigns a number to every IDOC.
o The file of converted data is deleted.
IDOC processing
o IDOCS created are posted to the corresponding application program.
o Application program checks data and posts in the application database.
Finally Transport LSMW Projects:
R/3 Transport system
o Extras ->Create change request
o Change request can be exported/imported using CTS
Export Project
o Select / Deselect part / entire project & export to another R/3 system
Import Project
o Exported mapping / rules can be imported through PC file
o Existing Project data gets overwritten
o Prevent overwriting by using
Import under different name
Presetting for Inbound IDOC processing not transportable.
Reward if useful.
regards
santhosh reddy -
Material Variant Matching in Sales Order Creation with ref.to Sales Order
Hi All,
We are working in Variant configuration.Our product is defined at PQD(Product, Quality & Dimension).
But, Sales Contracts are created at PQ (Product, Quality/Grade ) level only.
We have defined Variant Characteristics GRADE(ALLOY CODE),DIMENSION AND TWO MATERIALS.
MAT 1 , configurable material.
MAT 2, A Material Variant of MAT 1, Having values of GRADE = A & DIMENSION = 150 in MRP 3 view of the same.
When a Sales Order is created for MAT 1 and its characteristics values are GRADE = A, DIMENSION = 150, Material Variant type matching happens & it replaces the configurable material.
Similarly,Sales Contract is created for Configurable material MAT 1, with only GRADE = A ( As mentioned above, only quality is known at contract creation level).But, when we are trying to creart a Sales Order with reference to this Contract, we are trying to punch characteristic Value for DIMENSION = 150 also. At this stage, Materuial Variant MAT 2 is shown, but it is not replacing MAT 1.
Is this the standard behaviour or there is some solution/enhancement available.
regards,
StutiDear Vijay,
in incompletion procedure we can arrange to check whether any field is empty, here data comparison is not possible.
As far as I know you can not achieve this through standard config.
To achieve your requirement, you will need to take help of an ABAPer, it can be achieved using Userexit.
ABAPer can use include MV45AFZZ
and Userexit ""USEREXIT_SAVE_DOCUMENT".
the code written in this userexit will check and compare the quantities before saving the dcument.
Logic if quantity enter is greater than the quantity mentioned in Contract show warning Message.
I hope this solves your Problem.
Regards,
Paresh -
Sales Order creation with Ship to not assigned to Sold to
Hi There,
I have an issue that I am able to create an order with a Ship to which is not assigned to Sold to. i.e, The sold to accepts any ship to and not giving any error. I am giving both Sold to and Ship to together while order creation. Is it because of this? Should I enter sold to and then press enter for the list of Ship to's assigned to that? I dont find any issues in the Partner determination.
Can you help?
Thanks in advance,
RenjithHi Renjith,
I agree with you that SAP allows you to enter any ship to(belonging to sales org of sold-to party) for a given sold to party.
To meet your requirement, You may like to use the Userexit MV45AFZZ (Form USEREXIT_SAVE_DOCUMENT_PREPARE) to check the Ship-to while saving. Thus a comparison could be made with assigned Ship-Tos for the given Sold-to party. In case there is a mismatch throw a error message before allowing committing of save.
Your developer would be able to help you to achieve this
Please let me know if this helps
Warm regards
Harpreet -
Sales order creation with reference to check quantity according reference
Hi,
I create return sales order with reference. But the problem is that system can not check the quantity of creation sales order according reference quantity now. I want the system check the quantity according reference sales order quantity and do not allow to put sales order quantity more than reference sales order quantity.
Thanks.hi,
please check the below thread
Return Quntity is more the sales Quantity?
this may help you
regards
senya -
Problem in Sales Order Creation with reference to Contract
Hi All,
We had enhanced Contracts (VA41) by adding fields thru append structures in VBAP and the same is provided in the "Additional Data B" tab at the item level.
The Z fields are populated with data and gets saved along with the contracts line items.
But when a sale order is created with reference to a contract, the data in the Z fields (maintained in Append Structures) of the contract are not getting copied to the line item of Sales orders.
Should a routine be necessarily written for copying Z fields from contract to Sales orders or Copy control must be set up for Z fields separately?
Any info on this would help.
Thanks,
K.V.VenkatasubramanianHi VJ,
The copying from Contract to Orders worked. I copied the standard routine (151) in data transfers and added the code to transfer Z fields from work area CVBAP to work area VBAP and attached the same in the copy control. It works!!!
Thanks for the help VJ.
Cheers,
Venkat -
Sales order creation with ref. to contract. Quantity related issue
Hii All,
I am creating sales order with ref. to contract. But i can enter more quantity than that mentioned in the contract. Here i need the system should give a warning while saving the order. I refered the thread Sales Order Against Contract
In this thread the procedure to convert the warning to error is given. but i need how to give this warning message.
In VTAA, I have maintained copy requirement as 303 at item level. & DataT as 151, 102 & 002.
Please suggest.Dear Vijay,
in incompletion procedure we can arrange to check whether any field is empty, here data comparison is not possible.
As far as I know you can not achieve this through standard config.
To achieve your requirement, you will need to take help of an ABAPer, it can be achieved using Userexit.
ABAPer can use include MV45AFZZ
and Userexit ""USEREXIT_SAVE_DOCUMENT".
the code written in this userexit will check and compare the quantities before saving the dcument.
Logic if quantity enter is greater than the quantity mentioned in Contract show warning Message.
I hope this solves your Problem.
Regards,
Paresh -
Sales Order Creation with reference to Quotation using FM IDOC_INPUT_ORDERS
HI Guru's,
I've a requirement to create the sale order from the quotation.
For this we are using the FM "IDOC_INPUT_ORDERS".
Here my problem is i'm able to create the sales order with the custom program, but if i made any changes to the quotation Header
(Ship-to party address) before creating the sales order, it is not reflecting into the sales order header level (ship-to party address).
What i was thinking is we are not using the Quotation as reference to create the sales order while filling the segments.
Could you please tell me which segment do i need to use fill the reference document number (quotation) at header level.
one more problem, if i change ship-to party of one line item, it is affecting the other line items also.
Please guide me what to do???
Thanks,
Adi.HI Ramesh,
Question:
Could you please tell me which segment do i need to use fill the reference document number (quotation) at header level.
Sol: use segment E1EDK02
Segment type E1EDK02 IDoc: Document header reference data
QUALF 011 : Referenced Document Number
BELNR XXXXX IDOC document number
DATUM 20100121 IDOC: Date'
what i've used in my program
I'm using the E1EDK02 segment as you mentioned above.
le1edk02-qualf = '011'.
e1edk02-belnr = Quotes-vbeln.
Question:
Here my problem is i'm able to create the sales order with the custom program, but if i made any changes to the quotation Header
(Ship-to party address) before creating the sales order, it is not reflecting into the sales order header level (ship-to party address).
Sol: Check you custom code .. whether you are bringing write address to segement or not
(if you change any address in Quotation then Address master is added with new entry with new address no )
In my program..
I'm passing the partner numbers and partner types (WE & AG) to the segment "E1EDKA1". (Ship-to & Sold-to).
What i was thinking is the above segment is causing the problems, because if we reference the Quotation, we should not pass the Ship-to and sold-to numbers, it should take all those from quotation.
I've tried to comment the code which we have written for that segment "E1EDKA1", it is giving me the error saying that
Customer numbers can't be determined for the document number..
Please guide me how to solve this problem..
Thanks,
Adi. -
Sales order creation with reference to quote using BAPI
Hi All,
I am trying to create a sales order with reference to quote using BAPI BAPI_SALESORDER_CREATEFROMDAT2.
I am passing the Quote number and preceding doc.category (B) at the header level and
at item level I am passing the quote number and the line item number in the quote for REF_DOC and REF_DOC_IT.
The order is created but there seems to be some issue with the document flow.
I do not see the Reference Doc number at the header level from the Sales order document flow whereas I can see the Reference Doc for each line item.
In VBFA I can see the Ref.Doc number at the header level along with the Ref.Doc at the line item level.
Why do you think it is not showing at the header level from Sales Document Document Flow?
Is there any bug in the standard BAPI or is there any OSS note?
Any answer would be greatly appreciated.
Thanks
Sandeephi,
Are you giving different quotation numbers in the different line items, if that is the case you will not get that in the header document flow, as it cann't point to all the quotations.
Thanks,
Mahesh.
Maybe you are looking for
-
I have an iPhone 5c recently updated with iOS 8, i am having problems with my IMessage. when i try to IMessage my contacts, instead of sending the IMessage from my phone number the message is sent with my email. i also cannot be in a group chat due
-
How can I delete watched and unwanted TV shows from my ipad. They don't show on my mac, they don't show up in the useage tab. But when I click on videos, the tv shows show up with links to the cloud. How can I delete?
-
Hi I have a pdf file defined with 2 page sequences. First page with total width of 8.5in. In that i have defined xsl-body with left margin 2.375in. If i display a some data in that region, it displays correctly. If i display a table, then it takes to
-
Get above code every time I use theme = Full Frame 05. Don't get it when using a non-full frame theme eg Fish. Have found discussion re this from a previous request and looked at http://support.apple.com/kb/TS2180. I can display "Show tv safe area" b
-
HT5610 How do I retrieve the stuff I backed up on icloud to my new computer?
How do I retrieve the stuff I backed up on icloud to my new computer?