Sales Analysis for a certain period

Hello Experts,
In standard Sales Analysis Report, when we run report for a certain period for "Customers" and when we run the report with same parameters for "Items" it gives different results.
Can anybody please guide me, why these results are different whereas we are using the same parameters in both the Tabs i.e. Customers & Items.
Thanks & Regards,
SN

Hi Shazad,
One possible reason is that you have service type documents in that period. In such case, the document total appears in Customers tab, but not in the Items tab.
Could this be the case?
I hope that helps.
Regards,
Toni

Similar Messages

  • Report for analyse the sales realisation for a particular period

    Hi guys,
    Is there any report for analyse the sales realisation for a particular period.
    thanks
    murali

    Able to find the solutin the report S_AHR_61016532 it self.

  • Valuated stock for a certain period

    Hi all,
    Using transaction MC.9 (Material Analysis: Stock), you can search for a material for a certain period (ea. 04.2007). The outcome gives you the Valuated Stock for that period.
    In which table is this Valuated stock stored?
    How can I fetch this Valuated Stock (through table, BAPI, ...?
    Many thanks in advance.

    Hi,
    Reading data from MBEWH is tricky since as you correctly pointed out there may not be any record in MBEWH for a particular period.The logic for creating a record in MBEWH is for first relevent entry in the current month create a history record in MBEWH i.e. e.g. if there is a say GIR or any stock movement today & if this happens to be the first entry for materialValuation area then it will create a record in MBEWH for the previous period i.e. 2008/03. Now suppose there is no movement at all say for the period 2008/04 & say 2008/05 materialValuation area in that case as per the above mentioned logic for the first record of the materialVal area for the period 2008/06 it will write a record for 2008/05 but there will be no record for the period 2008/04.so to get the currect valuated stock get all records for materialval area into an internal table where
    period i.e YYYYMM is GE period under consideration. Then sort the internal table on matnrbwkeybwtarlfgjalfmon. Then loop at the internal table & if you hit the first record pick up the stock i.e the stock you are interested in & exit from the loop. However if no record is found in the internal table get the details directly from MBEW. & that's it. You may refer to SAP help for the same. (search for MBEWH)
    I hope this helps,
    Regards,
    Raju Chitale

  • Sales analysis for selected reps

    Hi,
    I'm trying to find a way to use SAP's existing Sales Analysis reporting function to run a sales analysis report by a group of salesreps.  These salesreps are in a territory, so want to pull 1 sales analysis for this territory.
    For example, I have about 25 reps in the OSLP table.  I need to run SAP's standard Sales Analysis by Sales Employee, but be able to choose several reps instead of just one or all. 
    I've considered adjusting the Sales Employee names so that they all fall into consecutive order in the table (example: Northwest-Bob Smith, Northwest-John Black).  This which would allow me to run by a range.  However, we want to keep historical data for each rep; when they leave our employ, we don't want to lose the record of their sales, which would happen if I routinely change the Sales Employee name field when their customers are assigned to another salesperson.
    Would prefer not to have to set up queries for each territory either, because I would need to remember to maintain and change the queries to the proper salesrep each time we add or remove a salesrep.
    Any suggestions on the easiest way to make SAP's sales analysis reporting do what I want without going to the work of creating and maintaining queries?
    Using B1 2007A, pl 42.
    Thanks,
    Shelby

    Hi, Gordon-
    Are you referring to setting up Territories under Admin, Setup, then enter the territory in the BP, then run a query on that?
    If not, how would I go about this?  I haven't used the Territory function in B1 yet, but so far only see it as a field in the BP.
    Thanks,
    Shelby

  • Showing Monthly Sales Analysis for Sales Employees (including credit notes)

    Hi Experts,
    I want to show a report for my director so we can accurately decide upon sales targets for each sales employee for 2012.
    The Monthly Report > Invoices by posting date in the Sales Analysis module is not ideal because it does not appear to include credit notes so the totals are incorrect.
    How could I create a query which gave me a total for each month of 2011 for every sales employee which includes invoice minus credit notes.
    Unfortunately my SQL is not great but I started something which might help - this is only for first 2 months of the year.   I presume I would need a select statement for each month if I wanted to have the sales employee name followed by a total for each month.    Maybe this is too intensive a query to run anyway.  
    SELECT T1.[SlpName],
    (select(sum(t2.doctotal)-(t3.doctotal)) where (Month(t2.docdate)=1 and t3.docdate=1) FROM OCRD T0  INNER JOIN OSLP T1 ON T0.SlpCode = T1.SlpCode INNER JOIN OINV T2 ON T0.CardCode = T2.CardCode INNER JOIN ORIN T3 ON T0.CardCode = T3.CardCode)
    (select(sum(t2.doctotal)-(t3.doctotal)) where (Month(t2.docdate)=2 and t3.docdate=1) FROM OCRD T0  INNER JOIN OSLP T1 ON T0.SlpCode = T1.SlpCode INNER JOIN OINV T2 ON T0.CardCode = T2.CardCode INNER JOIN ORIN T3 ON T0.CardCode = T3.CardCode)

    Hi,
    I have moved your posting here because it belongs here.
    You may check this first: Re: Top Customers report
    Thanks,
    Gordon

  • Does anyone know of an IPhone app to lock myself out of my phone for a certain period of time?

    Does anyone know of an app I can use so that I can lock myself out of my phone for a specified time interval? There are times where my phone becomes a distraction and it would be easier to just lock myself out of it for 45 mins than to go to the trouble of putting it somewhere were I won't notice it and it will be too far away from me to just pick it up and start searching social media sites as procrastination.

    It's called "SelfControl". It can be a little hard to learn to use but it's worth the effort.

  • How to only show data for a certain period of time for cumulative data?

    I need to show cumulative data for the past 12 months on a chart (e.g. # of accounts). But in order to get the cumulative data for Month 1, I need to cum the data starting from the very first month when we started to add new account which can be Jan 2006. If I put a filter to limit the data to only last 12 months, then my Month 1's cum data will not include any account prior to Month 1. So how do I do this?
    Edited by: user637947 on Feb 5, 2009 2:02 PM

    Hi,
    Try this Filter....
    Opportunity."Close Date" >= TIMESTAMPADD(SQL_TSI_MONTH, -11, TIMESTAMPADD(SQL_TSI_DAY, -(DAY(CURRENT_DATE) - 1), CURRENT_DATE)) AND Opportunity."Close Date" <= TIMESTAMPADD(SQL_TSI_MONTH, 1, TIMESTAMPADD(SQL_TSI_DAY, -(DAY(CURRENT_DATE) + 0), CURRENT_DATE))
    Thanks and Regards,
    Amit Koul

  • Is it possible to stop depreciation for a certain period?

    Hi all,
    I am wondering if it is possible, and how it is done if yes, to stop the depreciation. For example in the 2nd year of an asset the user wants no depreciation on that asset for 5 months, after which the asset starts depreciating again. Also life is prolonged for this 5 months.
    Thanks for ideas!
    D.

    Hi,
    You can Use Shutdown check box and give the shutdown interval in the Time dependent data tab of Asset master.
    Regards
    shankar

  • How to check list of  transactions used  for a certain period of time

    Hi
    Is there a way to check the transcations that were used e.g the past two months apart from using transaction STAT or sm19 or sm20.
    Thanks

    Hi..  i have got a similar request like yours.... i need to find the list of 
    list of transactions used by all users in a user group (in my case PLKR) in the past two months.
    is this possible to find???

  • IS Retail - discontinuing an article for a certain sales area

    HI,
    For an article, say article 123456, we can process a sales order for a certain sales org / distribution channel. say 1000 / 10. however, we want to discontinue this process. How do I set this up in the system, so it won't allow anymore an article 123456 to be sold under sales area 1000/10. I'm thinking of changing the article master? But how should it be done?
    Thanks in advance !

    Go to transaction MM42.
    select the sales views with the sale org and distribution channel you want (1000/10).
    fill in the value in field DChain-spec.(MVKE-VMSTA) then the material won't be able to used specific sales org / distribution channel anymore.
    Distribution-chain-specific material status
    Indicates whether, for a specific distribution chain, the material may be used in individual functions in Sales and Distribution.
    Use
    The distribution-chain-specific material status restricts the usability of the material for the distribution chain concerned, that is, it defines whether a warning or error message is displayed if you include the material in a particular function.
    Example
    The material may be a part under development or one to be discontinued.
    Cheers,
    Chaiphon

  • Report of all sales orders for a business unit

    I am analyzing revenue, and I would like to run a report that would list all sales orders and the value of those orders in a particular business unit.
    I require the value of each and every sales contract during a certain period. Can I run a report that lists all sales contracts opened during a particular period?

    Hello,
      from the standard SAP menu, under: "Logistics --> Sales and Distribution  --> Sales --> Information System  --> Orders" you can find some transactions reporting sales orders lists, such as VA05 or SDO1, which perhaps could fit your requirements. Otherwise you can create a query to merge the tables containing the information that you need. As of my knowledge there's not an organizational level called "Business unit" in SAP, so you should check if in the transaction mentioned above the field you use to identify the "Business unit" is available.
    Hope to be useful.
    Best regards,
    Andrea

  • Std. Sales analysis - By material-material group

    Hi all,
    I am executing std. material analysis(t-code MCTC) 
    Unnder menu VIEW >> SAP hie. drildown or hiel drildow >> Material group or prduct hierarchie
    is not active, I am unable to see it by material groupwise, how to activate this as I am unable to locate IMG configue for this.
    Kapil

    Hi
    As you are using the Standard Sales analysis for Material "MCTC" the characteristics which are database key fields are limited.
    If the Material group is required you can copy the standard info structure and include the required characteristics .Take precautionary steps and with relevant SIS skills you can achieve it as below:
    MC21. Create Info structure
    MC22. Change Info structure
    MC23. Display Info structure
    MCSI. Standard Analysis of Sales (here you can see the user-defined info structures)
    Regards,
    Ravi

  • Sales Analysis - Gross Profit Percentage

    Hello,
    This is a very basic question that hopefully somebody can help me with.
    I ran the Sales Analysis by Customers --> Orders --> for a specific customer.  When I look at the detailed report of the Sales Analysis for this particular customer there are two orders.  I'm confused by how SAP is calculating the gross profit percentage.
    For example, one of the invoices has a sales amount of $76,160.00 and a gross profit of $22,580.00.  The gross profit percentage on the analysis is 42.143. 
    Shouldn't the GP % really be 29.648%?  I used the following formula to calculate this:  (Gross Profit/Sales Amount)*100. 
    What formula is SAP using? 
    Thank you,
    Amanda

    I get it.  It's calculating, however, it's setup on that tab.
    I've been able to calculate both percentages now.
    Thank you so much for your help.  I knew it had to be basic!
    Thanks!
    Amanda

  • Restric materails from sales for certain period

    Dear Gurus,
    There are some materials that should be in  quality inspection for specific period and after that period it should automatically release for unrestriced use stock. Basically we want to restric some material from sales for certain period and after that period it should be automatically avoid that restriction.
    Please provide me a possible solution for this.
    Thanks,
    Regards,
    Chameendri

    usually a human changes a status with a material movement, e.g. thru usage decision if Quality module is used.
    there is nothing in customizing or master data where you can say the material becomes saleable after 3 day lying in the shelfs.
    the GR processing time can be extended to 3 days, so ATP can know that the material is not immediatly available after goods receipt.
    But this does not change a stock status from blocked to unrestricted  (or quality to unrestricted).
    If you want this, then you have to write a report that checks how long the batch is already in Q-status and then calls a BAPI for posting a goods movement to change the status. and this report can then be scheduled to run in background once a day.

  • Sales Analysis Item Tab Displays Zero Dollars for "Orders"

    This pertains to SAP B1 SP 00 PL 16 Version 8.8.
    While doing the Sales Analysis function under Sales A/R > Sales Reports > Sales Analysis > Item Tab, the system does not report on the dollars for the day when I select "Orders" or "Delivery Notes'. The system does display the proper dollars when I select "Invoices" on the "Item" Tab.
    And the "Invoices" and "Orders" and "Delivery Notes" buttons display correct dollars on the other tabs for Customer and Sales Employee...so why not on the "Items" tab???  Strange that a button would be displayed which does not work...
    Does anyone know why this might be happening and/or how to fix this???
    Does SAP plan on fixing this in any upcoming patch levels???
    Regards - Zal
    Responses received from SAP B1 Core Forum:
    Sales Analysis Item Tab Function Not Showing Orders Dollars

    Thanks for the quick reply Gordon - hope things are continuing to go well in your new endeavors &;-D
    Well that is really strange that items is handled that way - I have created SQL to get the results but I always like to balance out to what SAP B1 is reporting.  My SQL detail and grand totals are fine by Customer and I have been able to reconcile in that manner, but wanted to reconcile by items also.  I am certain I have done it before in SAP 2007A...
    Has there been a change to the item/sales order table in Version 8.8???
    Take care my FFF - Zal

Maybe you are looking for