Sales area and sales office not displyed in bp

Hi all,
i'm new to crm , when i'm creating BP i'm not getting my sales area and sales office data in BP sales area data tap. Please provide me solution for this issue.
Thanks and regards
kesav

Hi prassana,
Thanks for your reply. I have maintained my org model and maintained attributes, country  in org units and i have checked sales scenario bust still my sales area not determined in my bp level. i wanted to know where can i check org determination?, Please give me any another solution for this issue.
Thanks and regards
kesav

Similar Messages

  • Sales area and sales doc

    Hi
    how can I configure the system where all sales document type can be allowed for all the sales area. and this means i dont require to assign sales area and sales doc type into OVAZ.

    Hi
    Yes, you are right.
    Check the img activity documentation in SPRO under "Assign Sales area to sales doc types".
    Assign Sales Area To Sales Document TypesI
    n this menu option, you allocate the allowed order types to each sales area group.
    You do not need to make any entries at all if all the sales order types are allowed for each of your sales areas.
    If you wish to check allowed sales document types, you must set up common sales areas. This means you must define common sales organizations, common distribution channels and common divisions. If, for example, you have define common divisions, then you must also define common distribution channels and sales organizations.
    Regards
    Madhu

  • Sales Area and Sales document type

    Hi Professionals,
    I like to clarify if the following is correct:
    1. Sales Area Must Be assigned  to Sales document type.
    regards
    John

    Hi John,
    1. Sales Area Must Be assigned to Sales document type
    -as far as the logic for this goes ,
    its main relevanmce  is to limit the sales document type to the sales area is that the end user does not create a sales order ,
    for another sales area in your sales document let for ex-
    there is a sales area for whole sales and one for retail.
    now you have configurerd the ywho sales doc type for whole sales- sales area and yret for retail sales area.
    now if the user creates the ywho sales order in retail sales area there will be process related problems for despatch guys so in order to limit this error and hassle, there are the ales area specific sales document types and can be configured as earlier told by gurus
    revert if helpful
    Mohit Singh

  • Sales Office, Sales group and Sales Area table of CRM BP

    Hello Experts
    Please give me the table name where i will get the sales office, sales group and sales area of the CRM Business Partner.
    Any pointers.
    Regards
    DJ

    Hi Jamal,
    You may use table CRMD_ORGMAN
    Regards,
    Shaili
    Edited by: shailip on Aug 26, 2009 7:44 AM

  • About configuring sales organization and sales office

    how can i create sales organization and sales office in SAP ??

    Hi
    where to create new sales orgs and sales office is well explained by the other friend
    After creating the new sales org there are a lot of assignments to be done in img-enterprise structure assignment-sales and distribution
    1.   assign sales org to company code
    2.   Assign sales org to distribution channel
    3.   Assign sales org to division
    4.   Assign sales org distribution channel to plant
    5.   Set up sales area
    6.   Assign sales office to sales area
    Like that a lot of enterprise structure assignments needs to be completed
    Plus
    T code VOR1 define common distribution channels
    T code VOR2 define common divisions
    T code OVAO combine sales organizations
    T code OVAM combine distribution channel
    T code OVAN combine divisions
    T code OVAZ  Assign sales order types to sales areas
    (Right now i dont have SAP access  so that i am not able to tell you every thing
    But these are must assignments which needs to be done if you have to use your new sales org
    All the best
    Regards
    Raja

  • Sales area data view is not visible

    Hi All,
    the salea area data view  is not visible for  all BP roles in BP master data
    please help me how can i need to put in a visible

    hi
    sales area data tab is not visible for each and every BP role,
    it is visible for sold to party,ship to party roles,
    there is aview associated with this role that is CRM 000
    if you want to have sales area data tab visible in the role like BP general you have to assign this view to your role
    but i should make you one thing very clear that sales area data tab is meant for the customer who has purchased the order and final order has been given and within this tab you have each and every info regarding the sales office,sales group etc that where the order is to be delieverd or purchased from,
    once a final order is given it can be sold to party role,ship to party role or bill payable role ,u urself tell in the role of customer how can u see the sales info if the customer hasnt purchased the order ,
    likewise the consumer role also has sales data info so sales area data tab is visible in this role too
    hope it clears all your doubt,
    in case of any doubt do revert back
    best regards
    ashish

  • How to restrict sales group and sales office in va01?

    in transaction "va01" ,I want to restrict "sales group" and "sales office", but there is no
    relative authorization object. I create a role named "z1000test001" with va01 , there are only "division","sales organization"
    and "distribution channel" which could be restricted.
    the authorization object with va01 is : V_VBAK_VKO.
    and I find another authorization:V_VBKA_VKO ,which contains:"sales group" and "sales office",
    but this one seems have no relationship with va01.
    Is there any method to restrict "sales group" and "sales office" in va01?
    Could anybody help me?

    Hello,
    This has been discussed before and there's a solution available.
    Have a look at this thread: Authorization for Sales Office and Sales Group
    Cheers
    Jurjen

  • Sales office and sales group and sales district

    what is the difference between Sales office and sales group and sales district,
    please explain,
    Thanks

    hi
    sales office
    A organizational unit in a geographical area of a sales organization.
    A sales office establishes contact between the firm and the regional market.
    sales group
    A organizational unit that performs and is responsible for sales transactions.
    sales district
    A geographical sales district or sales region.
    You can assign customers to a sales district and use the sales district to generate sales statistics.
    regards

  • Need to know the table for sales org and sales area of role Sold-to  in CRM

    Dear Sir,
    Our server is CRM 5.0, I would like to download the data from CRM , however, I would like to know the table name which keep the sales org and sales area of role Sold-to  in T-code : BP . However, we can't find the actualty table.
    Please kindly advise.
    Thank you
    Lek

    Hi Vimol,
    You can get Org details in various tables like Sales Org, Division, Distribution Channel in following tables with help of PARTNER_GUID.
    Sales :
    CRMM_BUT_LNK0010
    CRMM_BUT_LNK0011
    Shipping:
    CRMM_BUT_LNK0020
    CRMM_BUT_LNK0021
    Billing :
    CRMM_BUT_LNK0030
    CRMM_BUT_LNK0031
    Organization :
    CRMM_BUT_LNK0140
    CRMM_BUT_LNK0141
    I think, for you Organization related table CRMM_BUT_LNK0141 would be useful.
    From this table you will get Sales Org, Division, Distribution Channel.
    And in order to get Sales Office of BP, you will get it from table CRMM_BUT_SET0140 where you can put set_guid fetched from CRMM_BUT_LNK0141
    Hope this helps....Please reward points if useful.
    Regards,
    Shailesh Jadhav

  • Business area and Sales organisation

    Can any 1 of u tell me the difference btw Business area and Sales organisation

    Dear Venkata Krishnan
    Business areas are primarily used to facilitate external segment reporting across company codes, covering the company's main areas of operation (product lines, branches).
    You can assign all balance sheet items, such as fixed assets, receivables, payables, and material stock, as well as the entire P&L statement directly to business areas. You can only assign banks, equity, and taxes manually to business areas indirectly. For this reason, it is not possible to create the legally-required financial statements and tax reports at business area level. Financial statements at business area level are therefore only suitable for internal reporting.
    Sales Organisation is an organizational unit subdividing an enterprise according to the requirements of Sales. It is responsible for selling materials and services.
    A sales organization can be subdivided into several distribution chains which determine the responsibility for a distribution channel.
    Several divisions can be assigned to a sales organization which is responsible for the materials or services provided.
    A sales area determines the distribution channel used by a sales organization to sell a divisionu2019s products.
    thanks
    G. Lakshmipathi

  • Difference between business area and sales area

    Hi
    I am swetha i have one doubt
    1) what is the buisiness area and what purpose we use the business area
    2)  what is sales area and what purpose we use the sales area
    3)what is the main Difference between business area and sales area.
    Regards
    Swetha

    Hii..
    Business Areas in SAP are used to differentiate transactions originating from different points/lines/locations in business. Let me give some examples to elucidiate:-
    A company (say, ABC) is a huge company and has a variety of businesses under it. Let us say that it typically operates in 3 different domains like machinery manufacturing, trading and assembling of machine parts.
    There are 2 options here now -
    1. Either create different company codes for the 3 business operations (which would be the easiest and require no creativity)
    or
    2.) Create each of these business lines into business areas (the better option).
    The advantages of using the second option is:
    1. You can use these business areas if other company codes require the same areas
    2. The configuration is simpler as in case of company code, you would require to go through the entire configuration of creating Chart of Accounts, Fiscal Year variants, posting periods variants and so on. In the business area option, you just need to attach it to the company code and the rest of the details in Business area is attached by default from the company code you are using it in.
    3. Using the options in controlling (EC-PCA, Enterprise Controlling, Profit Centre Accounting), you can even draw up Balance Sheets and PL statements for your business areas and hence this is used for management accounting in some companies (like HP, Dell, etc) when it wants to know the operating profits for different business areas/lines.
    The above was an example when the company wanted to separate entries according to the lines it operates in... the other case could be when it wants to find out profitability during its operations in cities and differentiates these cities into Business
    Areas...
    Business Areas are not much relevant in FI but are much more relevant in CO.
    Hope this clears.
    What is mySAP SD?
    The SAP sales and distribution is part of the logistics module that support your customers, starting from quotations, sales order and all the way towards billing the customer.  It is tightly integrated with the MM and PP functional modules.  It allows companies to input their customer sales price, check for open orders and forecast etc.
    The most important basic functional features in the sd module are:
    - Pricing                                           - Availability Check
    - Credit Management                       - Material Determination
    - Output Determination                     - Text Processing
    - Tax Determination                          - Account Determination
    Regards,
    Aakash

  • Sales area and Pricing

    Hi
    I have an issue where we have worked with few sales areas and different pricing procedures, Now we have to bring all sales areas to one sales area and different pricing procedures to one pricing procedure.Please throw some light on this issue where I can have some solution.
    Thanks in Advance,
    Kanna Palle.
    Edited by: kanna palle

    Hi Kanna,
    In my point of view pricing are recorded in condition record.
    so if you want to combine all the pricing procedure then i dont this so this is possible.
    What you can do is create new pricing procedure and add all the condition types which are active.
    so that you can get the pricing procedure of your requirement.
    hope so this might work but i dont know how to combine pricing procedure.
    And if you want to combine your all sales area to one sales area
    then you can use combine sales organisation and combine distribution channel process.
    you need to create new sales organistion and distribution channels
    and do the assignment of both these with one division.
    then go to VOR1 and VOR2 to combine all your sales area to one sales area.
    hope so this might work for sales area combination.
    please post your reply whether it works or not.
    regards
    Raj.

  • Sales Order and Sales Item not copy over to table AFPO-KDAUF and AFPO-KDPOS

    Hi Expert,
    May I know why I run MRP and convert planned order to production order based on Sales Order, why the sales order and sales item is not copied and save in table AFPO-KDAUF and AFPO-KDPOS?
    I can see the sales order and sales item is appearing in MD04, but how is the linkage between production order and sales order/item?
    Thanks.

    Sales order No. and sales line item will only be transfer to production order in MTO ( Make to Order) scenario.
    If your scenario is MTO and the sales order reference is not getting  transfer, then check your requirement type and  requirement class setting in T.Code OVZH and OVZG.
    In standard SAP 'KE' requirement type  40 requirement class is used  for MTO scenario.

  • Material wise Sales area and customer master

    Hi,
    Suppose I have a plant 4002, if i want to see all the material of plant 4002 then i can see those to following MM60 transaction code but if i want to see a particular material and that material is belongs to which sales area and which customer master then how it could be possible .
    Regards
    Jibanjyoti

    Hi,
    You cannot see a material on customer basis unless it's MTO scenario, still try in t-code MB52.
    Otherwise try in table level as suggested above.
    Reg,
    JJ
    Edited by: Jagsap on May 26, 2011 2:01 PM

  • Crm tables for sales group and sales office

    Hello CRM Experts,
    Can any one plz. help me to find Tables for Sales Group and Sales office.
    It will be really helpful if the above fields have relation to the Business Partner.
    Thanks in Advance,
    Regards,
    Bharat.

    Hi Radek,
    I feel the table which you have given is the right table but in my scenario we have created sales office and sales group(in org structure) independently in CRM, so now we need to find these values from the table independently as well as with relation to BP the table which you have provided can be used for second scenario but if we want to fetch the values of all sales office and sales group which table i have to use.
    One more problem for second scenario is in BP we cant able to see the sales ofice & group values which we defined in CRM, if we can save BP with sales office and group values then only we can use the table which you have given
    Highly appreciable for your replies.
    Thanks,
    Bharat.

Maybe you are looking for