Sales Area Data isnt replicating from CRM to ECC

Hi Gurus,
We are replicating some BPs of certain groupings from CRM to ECC.
We performed all steps relevant for this task mentioned in Best Practice u201CMaster Data Replication C03u201D. After performing the
steps results are as follows:
u2022 BP General Data is replicating without any trouble.
u2022 When registering sales area data in CRM and trying to get this replication to ECC we see that the BP Sales Area data isnu2019t replicated.
Monitoring SMW01.
The BDOC BUPA_MAIN ended with the following error:
Messages for business partner 0007000362: Fill in all required entry fields
Action already taken:
After reading this message I have reviewed the mandatory fields per Account Group in ECC and mapped them with the CRM ones. Even this changes I still can get sales area data in the ECC BPs replicated.
Is there something I am missing here.
Thanks for your help.

Hi,
Regarding debugging from CRM to R3. Please follow the below steps.
There are 2 methods to debug the Business Partner (BP).
First Method:
1)     In CRM, Go to SM59 -> ABAP Connections => The ECC client -> See if the saved user (in logon details) that is used to connect to ECC from CRM is a Dialog user.
2)     You can use transaction code SU01 to check User Type of User.
3)     Deregister the Queue through SMQS.
4)     Make changes to BP.
5)     Go to SMQ1, Select the Queue name Double Click 2 times then select the Tool bar (Debug LUW).
Second Method:
1)     Put a break point in Function Module SMW3_MFLOW_UPDATETASKBDOC.
2)     Create a BP and before save, type /h to activate debug, Mark update debugging option.
3)     When stops in Function Module u201CSMW3_MFLOW_UPDATETASKBDOCu201D you must be sure to set header-dbgmode = 'X' this will make the BDoc stay stopped in SMW01.
4)     Go to SMW01 and type /h and process the BDoc.
5)     Put a breakpoint in Function Module u201CCRM_UPLOAD_AFTER_MAP_HANDLERu201D and be sure to change LV_SYNCHRON = 'X' this will allow you to connect in ECC.
If the variable LV_SYNCHRON does not have any value, then it will work as background task, if the value is filled with the value u2018Xu2019, then it will allow debugging in R3.
And another point to be noted here is, the user type of the R3 should be Dialog User. If the user is not dialog, then it will not connect with R3.

Similar Messages

Customer sales area data not replicated to CRM

Hello,
I'm setting up the data replication model for master data based on configuration guide C03.
We have the following customer master situation:
existing customers with nr range 500000 - 599999 and account group A are created in ERP and replicated to CRM.
new customers with nr range 600000 - 699999 and account group B are created in CRM and replicated to ERP.
PIDE settings are fine.
The initial download of CUSTOMER_MAIN en CUSTOMER_REL went well. I've set a filter in CUSTOMER_MAIN on field KUNNR: value between 500000 - 699999. Everytime a sold-to business partner is created in CRM or a customer is created in ERP, the data gets replicated to the other system.
So far so good.
But here comes the problem: when I assign a sales area to a customer created in CRM (nr range 600000-699999) in ERP, the sales area data is NOT replicated back to CRM. When I assign a sales are to customer created in ERP (nr range 500000-599999) in ERP, the sales area is replicated back to CRM.
Do I have to run BUPA_MAIN? I don't think so, because sold-to business partner are already replicated to ERP.
Is the filter in CUSTOMER_MAIN not good? Should I split the nr ranges into 2 rows: 500000-599999 and 600000-699999 instead of 500000-699999
System environment:
CRM 7 EnhP2 (CRM RDS)
ERP 6 EnhP6
Kind regards,
Koen

Hello,
I found the problem. The PIDE was not set up completely: I only set the account group for ERP customer in the 'R3-->CRM' dialog structure. I've added the account group for CRM customers as well, and now customer data of CRM customers added in ERP, is replicated to CRM.
Cheers

How the data gets replicated from CRM to ISU

Hello All,
How the data gets replicated from CRM to ISU?
Would appreciate documents send to [email protected]
Regards,
Remi

Here is the link!
http://help.sap.com/saphelp_crm50/helpdata/en/c8/b0a68afbb3624cbabeb5ea12a8c639/frameset.htm
Cheer,
Daniel
http://sapro.blogspot.com

Configuration is not replicated from CRM to ECC for configurable product

Hi,
We have some materials in the system for which the configuration is not replicated from CRM to ECC.
We create a quotation in CRM and configure it. In CRM, the configuration is complete and components are properly exploded but when we check the same quotation in ECC, configuration is incomplete with respect to some characteristics and product references.
Please find below finding
1. If the same material is created in another plant/company code, the configuration is replicated properly.
2. We have also checked that the BOM is completely maintained for plants for which configuration is replicated. But we dont think so it could be an issue since if we create the quotation in ECC instead of creating in CRM, for the plant (for which the configuration is not replicated from CRM to ECC), it is properly exploded and complete.
3. variant prices are replicated properly even though components are not replicated.
We need to know if we can explode the BOM in the configuration even though complete BOM for the particular plant is not maintained. If its not possible to explode, why it is possible for us to explode the BOM in the configuration in quotation.
Please advise.
Thx.

the configuration (variant configuration and not customization) that is done in CRM contract is not copied to ECC contract. Is it because that item category in CRM is activated for doing the BOM configuration and the same in ECC is not activated for doing the BOM configuration?
My question is that if item category in ECC is not activated for BOM configuration then is it like that the BOM configuration in CRM will not be copied to ECC?

BP not getting replicated from CRM to ECC server

I am currently facing an issue, it seems like the replication of BP from CRM to ECC is not working, I have created a few business partners in CRM for which the BDOC got processed completely but when I go and check these on the ECC side, I am not able to find these BP. Can any one suggest what might be happening.

Thanks a ton for the note number Denis, I am looking into this and would certainly revert back to you if this works. Just to explain you the excat problem that Im facing as of now.
I have a few Business partners which we are not able to replicate from CRM to ECC, I have tried to debug the queue and find out what the reason might be, i could see that everything got processed successfully at the CRM side, the issue is when the BDOC reaches ECC, there it gives me a error that "NO UNIQUE JURISDICTION CODE CANNOT BE DETERMINED" area as "TAX_TXJCD".
If you can suggest anything new based on this information please let me know, in the mean time I will try the note that you had provided and would get back to you very soon.
Regards,
Nitin

POD flag set up automatically after BP replicated from CRM to ECC

Hi Experts,
we are working on CRM 5.0 and ECC 6 as backend system.
*Requirement :*We will create a BP record in CRM and the same will be replicated to ECC.For the BPs which is replicated to ECC from CRM , the "Relevant for POD "(Proof of Delivery) flag should set up automatically.
Note: we have done the following settings
1) Created a Reference Customer in ECC in which we have set up a flag "Relevant for POD ".
2) Initial download Reference BP from ECC to CRM by going to TCode:CRMC_BUPA_CONSUM in CRM.
3) Maintained relevant Sales Areas for the BP.
Question:
In CRM we dont have field called "Relevant for POD ".How can we populate the field "Relevant for POD " for the Business Partner that is Created in CRM and replicated to ECC?
For any helpful answer points will be awarded.
Thanks in advance,
-Rahul.
Edited by: rahul biji on Feb 12, 2008 6:21 PM

Hi,
did you find a solution to make this work ? We have the same problem with other fields that are only available in R/3. We are thinking of adding a FM to fill these fields in table COM_BUPA_CALL_FU. Did you find another way ?
Best regards
Annette

Business Partner with Classification not replicated from CRM to ECC

Dear CRM gurus,
We have a problem with the replication of Business Partner from CRM to the ECC system. Here's the story:
When we create a Business Partner (General) in CRM, it gets replicated to ECC. But when we create a Sold-to-Party Business Partner with Classification Customer, it does not get replicated to ECC. Can anyone of you advice to me what could be the possible error in the configuration? I have already make the neccessary mapping in tcode PIDE.
In ECC system, do we have to maintain the same number range value for SD customer AND also for Business Partner?
Desperately need help! Points will be generously rewarded.

Hi guys,
most likely your field settings on the ECC side for the different BP role will be different. I assume you will have a mandatory field for the sold-to party role in ECC that yo don't provide during the replication. If you check the BDOC errors in txn SMW01 it will give you an error "fill in all required fields".
One standard stumbling block is the field "language key" under communication data....
I hope that's what is causing the problem
cheers
Jens

Payment card details not replicated from CRM to ECC

Hello
We are creating BP in CRM which replicates into ECC. In BP, we are maintaining Payment cards. But, while replicating to ECC, this Payment card details are not replicating to ECC.
The data is present in the BDoc.
Please help!!
Regards,
Debolina

Hi Debolina,
Can you please share the solution. I have the similar requirement.
Regards,
Vaibhav

Product sales area data missing in crm

hi, expert
I'm currently having a problem with some of the products that are being replicated from R/3 to CRM.Product sales data initial synchronization is complete from ecc to r3,user create order is ok in crm.After a period of time,product sales area data missing in crm,we don't know when is lost,the problem is that we can't do an order for several products because there's no data in the sales and distribution tab(Sales Org., Distribution Channel) of the product master in CRM.

Hi ,
What you can do is,
Create a request for a material whose Sales Area data is missing in
CRM , and perform the request load in transaction:R3AR4.
And please check whether sales area data flows to CRM.
Put a filter in txn:R3AC1, to download single material or material
range.And before performing an initial load in txn:R3AS,please make
sure that sales area data is missing in CRM.Now, perform the initial
load in txn:R3AS.And please check whether sales area data flows to
CRM.
Check the filter settings in transaction R3AC1 for
object MATERIAL and please make sure that it would bring down all
the expected materials from R/3 along with the sales area data. I guess there is some
filter setting which is blocking it.
Please check the entries you have maintained in table MVKE - the entries
for the sales data maintained here must match with the ones maintained in the
filters.
thanks & regards,
Krishnen
Edited by: Krishnen Subramanian on Aug 9, 2011 8:47 AM

Company code data for custom replicated from CRM

Hi,
I am trying to default the company code data for a BP replicated from CRM as a customer but it is not working.
How should this be done in CRM 7.0, ECC 6.
I am have so far copied function module SAMPLE_INTERFACE_DE_BALE, added my own code and created the entry in table TBE34. But it doesn't work. Is this correct or is there another method?
regards
Tim

This is what we did wen we had a similar requirement...
u2022     In the ECC create a FM u2018Z_USER_EXIT_BEFORE_SEND_TO_MWu2019.
u2022     Register this function module for the CRM0_200 exit user in the ERP system.
a.     Use Transaction SM30, table TPS34, to go to the maintenance of the modules. Here, enter the Z_USER_EXIT_BEFORE_SEND_TO_MWu2019 module for the CRM0_200 process.
b.     Use Transaction SM30, table TBE24, to check whether the application you have selected (Product column in TPS34) is active.
u2022     The FM will be triggered whenever a Sold gets successfully replicated from CRM to ECC system.
a.     Check for the Object Class u2018BUPAu2019.
b.     Check for the Object Name u2018CUSTOMER_MAINu2019.
c.     If yes copy the BP GUID from the BAPIMTCS Structure.
d.     Now call rfc FM ZLSD_BP_EXTRACT_FRM_GUID in CRM to get the BP number and Acc Group for the respective GUID.
e.     Check if the ACC GRP is Z001.
f.     If yes make a BDC call to transaction FD01 and update the Company Code data u2026. Recon. Account     110000
                             Terms Of Payment ZN30
                           for the respective BP
Note: we have recorded a BDC program to create the company code data.
regards,
Sameer Ahamad

Clarification required on the Sales area data information.

Hi Master's,
As per the standard taxation practice,Tax determination depends upon the Tax liability of a Shipt to Party.
But in a Customer master The Tax classification is maintained in the SALES AREA DATA-BILLING TAB,To my understanding
the Billing Tab data comes from Sold to party.If so how does Billing tab convey the Tax liability of Ship to party.
I am Confused,please let me know in terms of Customer master and Partner types:
1) Which Tabs under the sales data i.e Shipping Billing...come from which Partner.i.e like Sold to party.
(Clarification required on the Sales area data information coming from which Partner functions).
Please suggest,
Thanks
Gajender

Hi
As per the standard taxation practice,Tax determination depends upon the Tax liability of a Shipt to Party.
But in a Customer master The Tax classification is maintained in the SALES AREA DATA-BILLING TAB,To my understanding
the Billing Tab data comes from Sold to party.If so how does Billing tab convey the Tax liability of Ship to party.
I am Confused,please let me know in terms of Customer master and Partner types:
1) Which Tabs under the sales data i.e Shipping Billing...come from which Partner.i.e like Sold to party.
(Clarification required on the Sales area data information coming from which Partner functions).
There is no need of any confusion here
All the tabs and data or fields pertains sold to party only
If for a sold to party say 1001 if he himself is going to be SH and PY and BP then there is no confusion
If for a sold to party say 1001 the ship to party is 1002 and PY is 1003 and bill to party is himself that is 1001
This is what mentioned or assigned in the partner functions of CMR of 1001 in the sales area data
This means there are another CMR lies in the name of 1002 and 1003
Whenever an order comes for 1001 as Sold to party for tax classifications the ship to paty 1002's master record is accessed by the system
System accesses another record for a particular detail (tax details)
Similarly for this customer 1001's order for payment terms 1003's CMR is accessed by the system
System accesses another record for a particular detail ( for terms of payment)
There is no need for any confusion and if you run this in the system with different data you will understand it much better
Regards
Raja

Want to change ACCOUNT GROUP to BP from CRM to ECC

Hi All,
We would like to change the Account group of our (Inside/Outside sales persons) when they are replicating from CRM to ECC. We did change the PIDE setting according to our requirement but surprisingly 10-12 BPs are not getting changed. We opened an OSS and they suggested to write a Z function module and
registering it in the table CRMC_BUT_CALL_FU for the CRM OUTBOUND which HARDCODES the CLASSIFICATION DATA to the BP in accordance with the PIDE settings so as to get the ACCOUNT GROUP for these BPs.
I checkede the tcode CRMC_BUT_CALL_FU for the CRM OUTBOUND where we need to place our own FM. I know to write a FM, but not quite sure how to start. Can anyone out there please help me with this.
Any suggestions are highly appreciated.
Thanks,
Karuna.

I was able to change the account status from EXPIRE(GRACE) to OPEN. The trick as you hint at is to create a temporary profile, assign that profile to the account in question, saving the password from dba_users first, changing the password, logging in with the new password, then alter the user assigning back the original password with the identified by values clause in the later user statement and lastly assigning the original profile, either DEFAULT or custom.
Here is the temp profile I used which used values less than 1 for the critical limits involved here. Cannot have limit values less than 1 in 9i according to Oracle but you can in 10g.
CREATE PROFILE "TEMP_PROFILE" LIMIT CPU_PER_SESSION DEFAULT
CPU_PER_CALL DEFAULT
CONNECT_TIME DEFAULT
IDLE_TIME 15
SESSIONS_PER_USER DEFAULT
LOGICAL_READS_PER_SESSION DEFAULT
LOGICAL_READS_PER_CALL DEFAULT
PRIVATE_SGA DEFAULT
COMPOSITE_LIMIT DEFAULT
PASSWORD_LIFE_TIME .0001
PASSWORD_GRACE_TIME 5
PASSWORD_REUSE_MAX 1
PASSWORD_REUSE_TIME .0001
PASSWORD_LOCK_TIME .0103
FAILED_LOGIN_ATTEMPTS 3
PASSWORD_VERIFY_FUNCTION DEFAULT;
Thanks for your help.

Sales area data is missing when Customer contact replicated to CRM

Dear Experts,
I am facing some problem with the Customer Contact replication from isu to crm, problem is when i create a customer contact by using bct0 interaction record is replicated to the crm, when i open the interaction record in the webic i am getting the error maintain the sales area data ,i am manually maintaing the sales are data in the crm could you please tell me why sales area data is missing while replication could you tell me how to rectify this error.I am using the standard transaction type 0010.
Thanks & Regards
Boyz..

Hello Shravanthi,
Have you looked at the screen in the screen painter in ERP (transaction SE51)? Maybe this will give you a clue to what data is missing.
Kind regards,
Johan Wigert

What are the steps to send sales order custom field from CRM to ECC

Hi Xperts,
We have created a custom field in sales order [ VBAK] and successfully replicate its value from ECC to CRM. But while doing the enhancement to replicate the field value from CRM to ECC [ When the SO is created in CRM ] we are not able to do so.
We used a FM in CRM0_300, but while replicating the SO from CRM to R/3 it is not getting called.
Please help us by providing the steps to do the full enhancement to replicate the custom field of SO from CRM to ECC.
Thanks in Advance.

Hi Anjaneyulu,
We are faced with a similar situation as you.
Here is our scenario with the steps that we performed so far:
1. We have added a few custom fields in CRM 7.0 (Ehp1) using AET.
The BDoc BUS_TRANS_MSG has been automatically extended with these custom fields.
2. On ECC side also, same custom fields have been added to VBAK and VBAP, using APPEND STRUCTURE. Fields were added to ADDITIONAL DATA TAB B in VA01 / VA02 transactions.
3. Extended BAPI structures BAPISDITM and BAPISDITMX in both CRM and R/3 Side.
4. As mentioned in the note 1053817, we have implemented BADI CRM_DATAEXCHG_BADI -> Method CRM_DATAEXCH_AFTER_BAPI_FILL in CRM (mapped fields from BDOC to BAPI structures)
5. In the above note, for R/3 BAPI to R/3 API they have given to implement user exit USEREXIT_MOVE_FIELD_TO_VBAP which we found in MV45AFZZ. But in this we are unable to find BAPI Structure to map.
Our issue is, when a sales order is created in CRM, it is getting replicated on ECC. But, only standard fields are getting replicated. The custom fields that we have added are remaining empty on ECC side.
In CRM --> txn SMW01, we can see that the BDOC is populated with custom fields also.
Could you let us know if your issue is solved completely. Are you able to see the value of custom field, in ECC? Did you use AET to add fields in CRM.
Could you please give us the steps that you have done.

Trying to add sales area data to sold to party in CRM using

Hi all,
i am trying to add sales area data to a sold to party business partner and i used the BAPI BAPI_BUPA_FRG0010_ADD. it executes i dont get runtime error but i get the error "invalid sales and distribution area" in return table.
also i see that the sales area data of the sold to party is not updated after i execute my program
can anyone tell me what i am missing
Edited by: jessica sam on Nov 13, 2008 8:17 PM

hey Rob i dont know if the configuration is done.but if i try to create a sold to party business partner in the screen in CRM i sales area data tab----->sales area, i find the drop down list with the values for sales organization, ditribution channel and division.
i am able to create a sold to party in CRM and it is replicating in ECC. but if i try to display the sales area data of a sold to party that i created using the function module BAPI_BUPA_FRG0010_GETDETAIL
it throws me an error saying invalid sales area data.
Also i find that data is there in CRMM_BUT_LNK0021, CRMM_BUT_LNK0031 tables but not even one entry in CRMM_BUT_LNK0011
Also i find that data is there in CRMM_BUT_SET0020, CRMM_BUT_SET0030 tables but not even one entry in CRMM_BUT_SET0010
is some thing missing in functional configuration. the CRM guy did an intial upload from R3 and brought the sales organization to CRM.

Sales Area Data isnt replicating from CRM to ECC

Similar Messages

Maybe you are looking for