SALES AREA IS NOT DEFINED FOR CUSTOMERS

dear All,
1.I got this error while creating Sales Order,
"Ship to Party x is not defined for Sales Area".
2. while creating Customer Master I got the following error.
"Sales Area xxxx 10 20 is not defined for customers,"
Can any body send soln ASAP.
Thanks and Regards
RAMS

Hi,
i think u have done this
Define Sales Area
SPRO
Enterprise Structure
Definition
Sales and Distribution
Maintain Sales Office
Go to New entries and define the sales office
Go to Address Icon and maintain the details and save it.
Now Maintainain Common distribution channel and common division. common distribution channel and division helps in sharing maste data effectively. Assure you have 10 sales areas. it will b painful process to define a customer at all these areas. instead, it will be wise to create a common distribution channe and division. this can be used as a ref dchnl and divn fo other dchnl and divns. then the master data can be effectivel shared
Go to Spro: Sales and distribution: Master Data : Define common division and disrtibution channel.
Hope this will help you.
Reward ?Point if helpful.
Thanks,
Raja

Similar Messages

SALES AREA MPPS MP LP IS NOT DEFINED FOR CUSTOMERS

At present I am working on integration of FI module with SD.When I am tryng to create Customer Master Record I am getting the error message "SALES AREA MPPS MP LP is not defined for customers".MPPS , MP , LP are sales org,dist channel,division created by me.Plase give solution.

Maintain common distribution channel & common division using transaction codes VOR1 & VOR2.

Sales area VNMH 01 02 is not defined for customers

Dear sir.
I have some questions, help me.
I'm creating a customer, but I have an error " Sales area VNMH 01 02 is not defined for customers".
I want to create plants, but I don't know the path.
Finanly, how to create branches, departments, storages
Help me deal the problem.
Thank you very much.
Regard,
Hangvt

Hi
Please Check Img>SD>master data-->Common dist. channel / division
Your Sales org with dist. channel/division will refered by some other dist. channel/division.
Kindly replace with urs.
example:
common dist. channel
ABCD AB AB
Common division
ABCD CD CD
Do like this and u will not get the error.
here we are assisning common reference dist. channel/ division for a dist. channel/ division
reward if helpfull
Muthupandiyan

Sales area JI00 JI JI is not defined for customers

i created enterprise struv for SD
DIVISION     JI
Plant     JI00
Sales Organisation     JI00
Dist Chan     JI
Divi     JI
Sales Office     JI00
Sales Grp     JI0
Stor Loca     JI00
Shipping Point     JI00
Company Code     0001
and all necessary assignmnets done successfully and consistency chk also , it is OK'
now i am creating custoemr in XD01 then i got an error as Sales area JI00 JI JI is not defined for customers
pls guide me wat to do, i am not done any other settings except i mentioned

Hi,
please check the following customizing:
- transaction SPRO
> SAP Customizing Implementation Guide
> Enterprise Structure
    > Assignment
      > Sales and Distribution
        > Assign sales office to sales area
> Sales and Distribution -> Master Data
          > Define Common Distribution Channels and Common Division.
- Transactions need to also be checked and maintaained if neccessary:
     -> OVXG: Define sales area
     -> VOR1: Joint Master Data: Distr. Channel
     -> VOR2: Joint Master Data: Distr. Division
Kind regards,
Zsuzsanna

Sales area ABCD CB AB is not defined for customers

Hi Guru,
              When I was trying to create customer T-CODE: XD01
Getting following error:
Sales area ABCD CB AB is not defined for customers
I am working on ECC6.
could you please help me out?
Regards,
sha

Hi
Please Check Img>SD>master data-->Common dist. channel / division
Your Sales org with dist. channel/division will refered by some other dist. channel/division.
Kindly replace with urs.
example:
common dist. channel
ABCD     AB     AB
Common division
ABCD    CD      CD
Do like this and u will not get the error.
here we are assisning common reference dist. channel/ division for a dist. channel/ division
reward if helpfull
Muthupandiyan

"Sales Area zzzz zz zz is not Defined for Customers"

Hi All
         I am trying to create a customer using XD01. In my org structure there is only one sales org, one dist channle, one division and hence One Sales Area zzzz zz zz which I have set up in IMG. The Error I am getting is
"Sales Area zzzz zz zz is not Defined for Customers"
And Peformance Assistant gives the following message
Message no. F2644
Diagnosis
The sales area specified has either not been defined (i.e. there is no entry in table TVTA) or it refers to another sales area for customers (customer division/customer distribution channel in the TVTA detail screen). This means that the customer master data of the sales area entered correspond to the data in the reference sales area and customer master data only needs to be maintained for this reference sales area.
Procedure
You can display the relevant and therefore valid sales areas for customers by selecting "Extras" -> "Sales areas" -> "All areas".
I have already checked that
1)My Sales area has been defined and Sales org is assigned to company code, Dist Channel and Division is assigned to Sales Org
2)In Table TVTA my Sales Area Exist...
3)I have tried creating my sales org by copying IDES sales org as well as creating a NEW sales org...however the error is still there
Any Ideas???
Thanks
Raj

Hi!
   This error is coming due to assinment is not made for common Divisions. You can assign this by going to SPRO>S&D>Define common divisions. Here you assign sales org ZZZZ , division ZZ, division for conditions ZZ, division for Customers ZZ. Then try to create customer master for ZZZZ ZZ ZZ .
This assignment for master data can be created in one sales area and that can be referenced to other sales areas also without creating again.Read the help below for details.
Define Common Divisions
     In this step, you define the divisions that common master data should
     apply to. The definition is valid within each sales organization.
     Example
     You can determine, for example, that the conditions which are valid in
     division "01" also apply to divisions "05" and "06".
     Note
     The common master data across various divisions refer to the conditions
     and the customer master data.
     You thus minimize the effort of entering and managing master data.
     In addition, you can extrapolate your own statistics per division
     without having to create master data in the different organizational
     subareas.
     Action
     For the divisions, define from which other division the master data
     should be copied.

"Sales area is not defined" error while creating IBD

Hi All,
We are getting the below error while creating IBD:
Sales area    is not defined
No inbound delivery created for the replenishment delivery 0089799561
We are trying to create IBD from OBD.
We have the Z output type ZPED, which is basically same functionality as SPED.
When we trigger the ZPED in OBD, an idoc will be triggered and IBD will be created automatically.
Here in this case, we are getting the error when ZPED is triggered and we are seeing this error from the processing log of that output.
Below is the details of the processing log of failed ZPED:
Object 0089799561
   Output type: Stk.Transf.CrteDeliv
   Processing log for program /SPE/STO_ID_PROCESSING routine STO_ID_CREATI
   Sales area    is not defined
   No inbound delivery created for the replenishment delivery 0089799561
ZPED is triggered by a batch job in the system but when we are trying to manually trigger it, it got successful.
Please suggest what can be the root cause of it.

First of all, please avoid using abbreviated words which is not encouraged here. Second, what is the Business process that warrants you to create inbound delivery against outbound delivery. Whenever you post here and expect assistance from members, please ensure you provide maximum details with regard to business process and what you had configured so that it will be easy for others to understand.
G. Lakshmipathi

Customer Master Record :Sales area INSO IN IN is not defined for customer

Hi Experts
I got error , when creating Customer Master Record .The error message likes below
"Sales area INSO IN IN is not defined for customers" .I maintained all the settings .But why i am getting again and again the same error .Even i checkd in TVTA table in SM30 but is shows clear data , please tell me where i made mistake .
I traid so many times maintain with new configuration ,but still field .Please what i have to done to over coome this issue .
Your Suggestions needful to me .. Please
Issue Details :
Message no. F2644
Diagnosis
The sales area specified has either not been defined (i.e. there is no entry in table TVTA) or it refers to another sales area for customers (customer division/customer distribution channel in the TVTA detail screen). This means that the customer master data of the sales area entered correspond to the data in the reference sales area and customer master data only needs to be maintained for this reference sales area.
Procedure
You can display the relevant and therefore valid sales areas for customers by selecting "Extras" -> "Sales areas" -> "All areas".
Regards
Rajesh .P

Maintain relevant entries in t.code VOR1 and VOR2 and then try again. Here assign the distribution channels and divisions to reference distribution channel and division.

Sales Document type not defined

Hi
I am working on an interface. Design is like below
Purchase Order->File Adapter->XI (BPM)->RFC Adapter->Sales Order in R/3
When I am trying to cretae a sales document in R/3, I am getting a message back from R/3 saying 'Sales Document is not defined'. But when Checked in R/3, that sales document type is existing. I don't see any Mapping execption in monitoring, but I am receiveing this message back from R/3
Any feedback will be highly appreciate.
Cheers
Rajiv P

Hi
Well initially it was a value-mapping problem. It is possible to debug a BAPI/RFC from XI. If it is possible, the please advise me of the procedure. My XI is working fine but I am getting a message back from R/3 as below. Any feedback will be highly appreciated
<?xml version="1.0" encoding="UTF-8" ?>
- <rfc:BAPI_SALESORDER_PROXY_CREATE.Response xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
<E_SALESDOCUMENT_EX />
<E_STATUS>E</E_STATUS>
- <RETURN>
- <item>
<TYPE>S</TYPE>
<ID>V4</ID>
<NUMBER>233</NUMBER>
<MESSAGE>SALES_HEADER_IN has been processed successfully</MESSAGE>
<LOG_NO />
<LOG_MSG_NO>000000</LOG_MSG_NO>
<MESSAGE_V1>VBAKKOM</MESSAGE_V1>
<MESSAGE_V2 />
<MESSAGE_V3 />
<MESSAGE_V4 />
<PARAMETER>SALES_HEADER_IN</PARAMETER>
<ROW>0</ROW>
<FIELD />
<SYSTEM>UD1CLNT010</SYSTEM>
</item>
- <item>
<TYPE>E</TYPE>
<ID>V1</ID>
<NUMBER>384</NUMBER>
<MESSAGE>Sales unit ****** is not defined for item 000000</MESSAGE>
<LOG_NO />
<LOG_MSG_NO>000000</LOG_MSG_NO>
<MESSAGE_V1>******</MESSAGE_V1>
<MESSAGE_V2>000000</MESSAGE_V2>
<MESSAGE_V3 />
<MESSAGE_V4 />
<PARAMETER>SALES_ITEM_IN</PARAMETER>
<ROW>1</ROW>
<FIELD />
<SYSTEM>UD1CLNT010</SYSTEM>
</item>
- <item>
<TYPE>E</TYPE>
<ID>V4</ID>
<NUMBER>248</NUMBER>
<MESSAGE>Error in SALES_ITEM_IN 000001</MESSAGE>
<LOG_NO />
<LOG_MSG_NO>000000</LOG_MSG_NO>
<MESSAGE_V1>VBAPKOM</MESSAGE_V1>
<MESSAGE_V2>000001</MESSAGE_V2>
<MESSAGE_V3 />
<MESSAGE_V4 />
<PARAMETER>SALES_ITEM_IN</PARAMETER>
<ROW>1</ROW>
<FIELD />
<SYSTEM>UD1CLNT010</SYSTEM>
</item>
- <item>
<TYPE>E</TYPE>
<ID>V4</ID>
<NUMBER>219</NUMBER>
<MESSAGE>Sales document was not changed</MESSAGE>
<LOG_NO />
<LOG_MSG_NO>000000</LOG_MSG_NO>
<MESSAGE_V1 />
<MESSAGE_V2>000001</MESSAGE_V2>
<MESSAGE_V3 />
<MESSAGE_V4 />
<PARAMETER />
<ROW>0</ROW>
<FIELD />
<SYSTEM>UD1CLNT010</SYSTEM>
</item>
- <item>
<TYPE>E</TYPE>
<ID>C_</ID>
<NUMBER>005</NUMBER>
<MESSAGE>The object references could not be written to the CRMKEY</MESSAGE>
<LOG_NO />
<LOG_MSG_NO>000000</LOG_MSG_NO>
<MESSAGE_V1 />
<MESSAGE_V2 />
<MESSAGE_V3 />
<MESSAGE_V4 />
<PARAMETER />
<ROW>0</ROW>
<FIELD />
<SYSTEM>UD1CLNT010</SYSTEM>
</item>
</RETURN>
<TI_EXTENSIONIN />
<TI_ORDER_CCARD />
<TI_ORDER_CFGS_BLOB />
<TI_ORDER_CFGS_INST />
<TI_ORDER_CFGS_PART_OF />
<TI_ORDER_CFGS_REF />
<TI_ORDER_CFGS_REFINST />
<TI_ORDER_CFGS_VALUE />
<TI_ORDER_CFGS_VK />
- <TI_ORDER_CONDITIONS_IN>
- <item>
<ITM_NUMBER>000001</ITM_NUMBER>
<COND_ST_NO>000</COND_ST_NO>
<COND_COUNT>00</COND_COUNT>
<COND_TYPE>EDI1</COND_TYPE>
<COND_VALUE>57.600000000</COND_VALUE>
<CURRENCY>AUD</CURRENCY>
<COND_UNIT />
<COND_P_UNT>1</COND_P_UNT>
<CURR_ISO />
<CD_UNT_ISO />
<REFOBJTYPE />
<REFOBJKEY />
<REFLOGSYS />
<APPLICATIO />

Ship-to party 10106086 not defined for sales area 6000 40 30 error

HI gurus,
We have maintained cross divisions 00, we VR02 have maintanied the combined the divisions and we have maitned the division at MM01, we are getting VP210 error: Ship-to party 10106086 not defined for sales area 6000 40 30.
please help me in this we are unable to create a order.
this is urgent.

Hi,
The error is Ship-to party 10106086 not defined for sales area 6000 40 30
Here system is considering distribution chan 40 & division 30
Go to VOR1 and maintain like as
Sales ogz - Distribution channel - Distribution for Condition - Distribution chn for CUST/MATERIAL
6000 - 40 - 40 - 00
Then in VOR2
Sales ogz - Division - division for Condition - division for CUST
6000 - 30 - 30 - 00
Then also check you have created customer for sales area 6000-00-00
Check in VOV8 go to details of your sales order type under general control tab Check division should be blank
OR
Remove division form material master basic data tab 1
Kapil

SHIP TO PARTY NOT DEFINED FOR CERTAIN SALES AREA

Hi ...
I am creating a specific type of sales order in va01 by reffering a billing document . But soon after entering billing document no it is showing " SHIP TO PARTY NOT DEFINED FOR CERTAIN SALES AREA..." The sales area --- which it's showing in error it is quite different ....it's not that one what we used for it in that ref billing document .
Note : We are maintaining ship to party , sold to party ..... in CRM only
Their also I checked it is assigned properly .Relatioship with sold to party is also OK .
But in R/3 I have checked that ship party is created in VD01 Where as sold to party is created in XD01 .
PLS ADVC

Dear Sundar,
Please check in these areas
1.Check the sales area which you are trying to create sales order and copying invoice sales area is same or not.
2.Why you haven't created ship to party in XD01 transaction.
You go to XD01 transaction exetend the customer master then try.
3.Check the customer master(Ship to party) is available under which sales area.
I hope it will help you,
Regards,
Murali.

Ship-to party not defined for sales area

Hi all,
I am really confused while creating a sales order, I need your help.
My sales org. - 1083, distribution channel - CY, Division - CW.
When I enter va01, in the initial screen I enter the above details. Then it goes to the create sales order screen where I enter my customer details.
After that, I enter my material number and quantity, it is giving me an error ship-to-party not defined for sales area 1084 CY and ZO ( other division) instead of 1084 CY and CW.
Where did I mess up ?
Thanks,
-Chandru

Hi,
Go to SPRO - SD - BASIC FUNCTIONS - PARTNER DETERMINATION Just check whther your partner function (SH) is assigned to your account group and also exists in the partner determination procedure.
Just try and maintain it there against your account group and against your sales document type in VOV8.
Also open your customer master for which you are trying to create this sales order. Just check whther in the partners tab , SH is shown? You can either use transaction BP or XD03.
Let me know, reward points if helpful.
Regards
Ravi

Error message: Ship-to party 1111 not defined for sales area 1000 01 50

Hi friends,
I created a new division 50 reference the one available. I maintained all the combination in sales area as far as I know.
When created SO, I got a error message saying " Ship-to party 1111 not defined for sales area 1000 01 50". Message No VP210
Please advise where I missed configuration.
Thanks,
Linda
Edited by: LindaSAP on May 25, 2010 5:40 PM

Hi,
Please check the below links
Ship-to party not defined for sales area
"SHIP TO PARTY NOT DEFINED FOR SALES AREA "
Ship to party is not defined for sales area..
Ship-to party not defined for sales area
Ship-to party 147 not defined for sales area US DS 20
ship to party -sales area error
Regards
Senya

Ship-to party 147 not defined for sales area US DS 20

Hi,
I am getting following error while creating a sales orcer with ref to contract
Ship-to party 147 not defined for sales area US DS 20
Points will be rewarded for satisfactory answer.
Thanks & Regards,
Vinayak

Hi,
After maintaining in US DS 20 it is working fine.
But normally we never maintain in US DS 20 for other transaction.
then why it is asking for this transaction.
we always create in US DS 10.
is their mistake while creating a BP or any SPRO changes required.
Thanks & Regards,
Vinayak

Ship-to party 1600 not defined for sales area 1000 10 20

Hi Friends,
I am making inquiry(VA11).I am using a material and sales org.combination as (1000/10/00).
I have maintained the same sales org. for material also.i am using for example sold to party as 1600 and for this I checked in XD02 the combination of sales org is (1000/10/00).
But after hitting enter I am getting the errror as Ship-to party 1600 not defined for sales area 1000 10 20 but for 1600 customer ship to party is defined in (1000/10/00).
This error I am getting is quite unusual.(as I am using 1000/10/00 this combination exist for material and customer but why am I getting the error for 1000/10/20. ?).
Any pointer will be rewarded.
regards

in mm02 i have already changed the division as 00 but still getting error(looking quite strange)
same error I was getting earlier but got the solution after changing division in mm02 but not striking this time.
also in xd02 for sales org 1000 and div. 20 i maintained both reference division for condition and reference division for customer as 00 bot no result yet.
same error.
Any other inputs.
Regards
Edited by: Amit Kumar on Oct 29, 2008 8:39 AM

SALES AREA IS NOT DEFINED FOR CUSTOMERS

Similar Messages

Maybe you are looking for