Sales Area Not Maintained

Gurus,
I am trying to create a sales order with reference to a contract. When I am doing the item selection and click on the copy button, it is throwing an error "Sold-to party 100000 not maintained for sales area 2000 20"  where '2000' is the sales organization & '20' is the Distribution channel.
But the customer is already there for that sales area.
Please any one guide me. Its very urgent
Regards,
Anandk

Hi Anandk
Plz go to spro-Sales and distribution-sales-sales doucument header-assign sales area to sales document types and do the following steps.
1. combine sales organisation:- go to position and find ur sales org and assign the same sales org as reference.
2. combine distribution channel :- speicify the same dist channel as refernce.
3. combine divisions.;- speicify the same division as reference diviosn.
4. Assign sales order types permitted for sales area:- assign ur sales area to OR.
Regards
Hari

Similar Messages

  • Sales area not defined

    Hello frnds,
                       I am trying to create a customer in XD01 but it gives me an error stating "SAles area not defined for customer.......I have maintained SAles area properly in IMG  but cant figur eout the reason for this error.
    Please assist
    Regards
    maddy

    Hi
    Go and check at SPRO -- SD -- Master Data -- assign common dist channel and Division...
    you will have assigned some dist channel and division opposite to your distr channel and division...
    Change the same to your own....
    Example
    You have to do like this for both dist channel and division
    S.org          dist channel        ref for master data         ref for condition
    1000                    10                         10                               10
    Muthupandiyan

  • Message no. 8I766 Number Ranges are not maintained For Extended Withholding

    Dear All,
    I am facing the following problem when i am trying to generate the withholding tax certificate
    1.) Message no. 8I766 Number Ranges are not maintained For Extended Withholding Tax 
         Number Ranges are not maintained for Business Place and Section. Check entries in tables J_1iewt_cert  (for Business Place) or J_1iewt_cert_n (for Section Code) and j_1iewt_certno  in EWT.
    I have checked all the above tables and found that the entries are maintained
    2) When i am trying for print priview and then print its generating spool request and the certificate is getting saved -
    > here the following problems are faced
          A) . TDS Number is not coming
          B).Details Of the tax deductor ( Name , Adress , TDS Circle , TAN & PAN is not coming Where       to update these details
          C) In Amount Paid / Credited Column - Some fixed amount is comming irrespective of the actual amount credited
    Please help me in soving the above issues
    Thanks & Regards
    Arun.R

    Hi
    You need to maintain Section Code wise number range . Go to Sm30 Select Table J_1IEWT_CERT_N and maintain it.
    Thanks
    GG

  • The MRP parameters are not maintained in plant JK01

    Good morning,
    t-code : md04 (stock req.list) but got an error.
    MRP parameters for plant 'JK01' have not been maintained
    Message no. 61273
    Diagnosis
    The MRP parameters are not maintained in plant JK01.
    Procedure
    Maintain MRP parameters in Customizing.
    how to maintained mrp parameter fro plant JK01 ?
    Thank you.

    Hi Robert,
    First maintain the plant parameter using  tcode OMI8 for the plant JK01.
    this will solve ur issue.
    hope it wud have answered ur question
    reward if useful
    shawn

  • Labels on Forms are not maintaining positions when viewed on a different computer

    I have a project with 14 forms.  The labels for the text boxes are perfectly aligned on one machine, yet when I run the project on a different machine (same screen resolution and all fonts available) many of the labels are no longer left- or right-aligned
    as designed.  I have experimented with changing the Autoresize settings (using Font, DPI, etc.) for the forms as well as the text alignment settings for the labels themselves, but they don't fix the problem.  I am using Visual Basic (Net 4.5) in
    Visual Studio 2013. Any ideas??

    Hi DrDon81,
    According to your description, the labels on forms are not maintaining positions in different machines.
    I suggest you disable the AutoSize(set to false).
    Or you could put the label in a panel or similar, then use Dock instead of just Anchor property.
    If it still not working, you could share a little sample which can reproduce the issue. we could help you better.
    Regards,
    Youjun Tang
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • After updating to Yosemite, my screen saver settings are not maintained.  The screen saver reverts to some Apple default.  There is no way to get my setting to be maintained.

    After updating to Yosemite, my screen saver settings are not maintained.  The screen saver reverts to some Apple default.  There is no way to get my setting to be maintained.

    Hi ..
    Might be corrupted preferences.
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    ~/Library/Preferences/com.apple.screensaver.plist
    Click Go then move the com.apple.screensaver.plist file to the Trash.
    Restart your Mac then reset your screen saver.

  • Preferences in Agenda are not maintained

    The preference settings in Agenda for "Show weeknumbers" and "Open activities in seperate window", are not maintained.
    Do other people face the same problem?
    Has anyone a solution?

    Okay - I think I'm good now. I had to manually edit the monitor.xml file
    and set up all of my preferences -as Danita described in another post as a
    bug.
    I couldn't just restart the monitor agent, however. I had to reboot my
    server, manually run my ncpmount statement then run the grpwise-ma script.
    If I could ever figure out how to write a script and where to put the script
    for the ncpmount I'd be in great shape. :)
    Connie W
    "Connie W" <[email protected]> wrote in message
    news:oPpdg.4369$[email protected]..
    >I just set up the latest 7.1 Beta - Monitor agent and application on a
    >SLES9.3 box. It's the only GW piece that is running on this box.
    >
    > When I try to set up preferences for notification and click Submit, it
    > isn't saving.
    >
    >
    >
    >

  • Clearing Accounts are not maintained error during CAT7

    Hi All,
    I have got query related to CATS posting to CO i.e. CAT7.
    We are doing inter company CATS. While transferring data to CO, we are getting error that clearing accounts are not maintained for the set of company codes and posting key is not defined.
    We have maintained ZERO rate in KP26 for the year for which we are posting timesheet.
    My questions are:
    Can we post CATS to CO with ZERO rates maintained in KP26 for that year??
    When rates maintained in KP26 is ZERO then do we need to have clearing accounts maintained thorugh OBYA??
    Please reply with your expert comments.
    regards
    Nishith

    I think, i have posted in the right forum. I have seen similar kind of tread. CATS is considered under PS only.
    Please suggest if still i need to post in CO forum.
    regards
    Nishith

  • Error: Control parameters are not maintained in the current client

    Hi,
    We have recently installed IDES IS-H 6.04 - HEALTH CARE. In the SAP easy access menu when I go to Hospital>>Basic data administration>>Hospital structure>>Organizational Structure>>Organizational Unit>>Create it throws the following error message
    "Control parameters are not maintained in the current client"
    Any help on this would be greatly appreciated. I can't move ahead without getting to create an OU.
    Warm Regards,
    Prasoon Singh

    Hi Prasoon
    Are you starting from scratch?
    Was the client created after the activation of IS-H?
    For new installation I always recommend to activate the industry solution in client 000 and then to create the new clients as copy of 000.  It will bring you the configuration of the Institution 0001. If not, it's very hard to do all the customizing, specially the SD ones.
    It seams that you have nothing configured, try to do the copy, if not, probably an entry in transaction ON05 is missing.
    I hope it helps
    With best regards
    Matías

  • BP from R3 to CRM - Sales Area not visible in CRM

    Hi Forum,
    I have done middleware setup for data replication between R3 --> CRM and its working fine.I can see the Customers in CRM that was created in R3 as Sold-to party(Iam downloading only Sold-to party).Iam encountering 2 problems :
    1.Iam unable to see all the Sold-to Party from R3.Only  few Sold-to party are visible, say out of 450 only 30 are visible in CRM.I have done initial load of Customer_Main and other customizing objects(Delta load is also working fine).
    2.And Iam unable to see the Sales area of BP(have assigned Co.code and sales area to Sold-to Party in R3) in CRM.
    Please Guide
    Thanks in advance
    Shridhar

    Hi Matthew,
    The 30 sold-to party that are coming from R3 have the No.30xxx as their id.But there are other sold-to party with the same No.i.e 30xxx.Other sold-to party have id 10xxx and 20xxx.
    I have maintained the number range in CRM according to the number range for the account group 001(sold-to party in R3) as exterbal num range.Below I have shown the Num ranges in R3 and CRM
    in CRM(Define Num Range)
    No.  From Num      To Num          Current Num
    Y4   0000000301    0000000999       350
    Z1   0000010000    0000039999        --
    Define Groupings and Assign Number Ranges(CRM)
    Grouping    short name      Desc                Num rng
    R001        R/3 Customer    R/3 Customer        Z1
    Y004        Int.No. Org BP  Int.No. Assgmnt     Y4
    in R3
    A/c Grp    Name         Classification     Group     Ext
    0001       Sold-to party  B                R001      X
    Define Num Range in R3
    Accnt grp    Num rng      Interval         Num assgnmnt
    0001         03          0000030001-      Internal
                             0000039999
    Message was edited by: Shridhar Deshpande

  • Sales are not defined

    Dear Friends
    I am using ECC 6.0 IDES
    try to create my own enterprise structure by copying std 1000
    after completion of define and assigned checked in EC01 which is showing all assignment of enterprise structur
    but when I am creating Material MM01
                                   enter Plant, Strg Location and Sales Organisation and Distribution Channel that time error is comming " Sales Org and Dist channel is not assigned. along with sales area is not defined like this message is comming.
    but when I am using same procedure to create entrprise sturcture and sales area assigment in 4.7  i am able to create material master records.
    thanking all of you
    Arun

    Hi
    This is because the common distribution channel t code  VOR1 and common division t code VOR2 assignment is not done
    If enterprise structure is correct and do this VOR1 and VOR2 your error will be solved
    Regards
    Raja

  • SESSIONS are NOT Maintained

    Hello Everyone!
    I am using Servlets, JSP and JDBC for my Web Application.
    I am using SESSION Variables. My entry point is Login Screen "www.man.com/proj/servlet/login" where user enters USERNAME/PASSWROD.
    This FORM calls PROCESS.JAVA Servlet which creates a SESSION for them as shown:
    HttpSession session = req.getSession(true);
    String uname = (String)session.getValue("uname");
    // code coonects to JDBC and see if they match
    // IF MATCH
    session.putValue("uname",req.getParameter("username"));
    String uid = "";
    uid = uid.valueOf(rs.getInt("uid"));
    session.putValue("uid",uid);
    //I then redirect to MENU Page ....which list options availabe for this user.
    res.sendRedirect(menuURL);
    on my menu page (MENU.JAVA), I have following:
    HttpSession session = req.getSession(true);
    String uname = (String)session.getValue("uname");
    String uid = (String)session.getValue("uid");
    if (uname == null)
         PRINT ERROR.....
    Later then user selects one of the MENU options and it takes to another Servlet (say OPT1.JAVA)...
    OPT1 Servlet is processed and at the end it displays a LINK which will take a User back to MENU.JAVA Page....
    But When users clicks this LINK (A HREF) it takes to MENU.JAVA Page but shows UNAME as NULL...... How is it possible...? SHOULD IT NOT RETAIN the SESSION....?
    HOW CAN I RETAIN my PREVIOUS Session Variables...?
    Any related informaiton on this is appreciated.
    THANKS!

    on my menu page (MENU.JAVA), I have following:
    HttpSession session = req.getSession(true);
    String uname = (String)session.getValue("uname");
    String uid = (String)session.getValue("uid");
    if (uname == null)
    PRINT ERROR.....
    Here when you are getting the Session from the Request object you need to use
    HttpSession session = req.getSession(false);
    to retain the old Session. If you use true, it creates a new Session

  • I'm unable to print or save pdf documents without losing text. Margins are not maintained page to page and text size might not be maintained either.

    Printing within Firefox is untenable. I lose text at page break or a right margin. This happens when printing or saving as "pdf" file. Everything works fine in Safari.

    Dear user,
    You are getting such output because you have checked ON the setting 'Print to file' in one of your previous prints. For resolving this issue, kindly uncheck option 'Print to file' present in bottom left corner of print dialog and then click on 'Print' (See attached image for reference).
    Hope this will solve your problem.
    Thanks
    sonal

  • Sales area Button in BP

    I am trying to create a BP(Organization) and assign a Sales Area for the BP in the Role Sold to Party. But when I try to assign a Sales Area to the BP through the Button 'Choose Sales Area' But the Button is in Display Mode and not in Change mode and it says that 'Sales Area not Maintained'. Is there any way to make the Button Enabled to assign Sales Area to the BP.

    Hi Krish,
    1. Do you have the backend R/3 system.If yes it appears that no sales org has been maintained in the R/3 system
    Check in R/3:
    Tcode: SPRO
    Enterprise Structure->Definition->Sales and Distribution->Define, copy, delete, check sales organization.
    2. DNL_CUST_S_AREA is used to get only the distribution channel and division.
        Tcode: R3AS
        Put the adapter object and press enter and execute.
        The disribution channel and division can be seen in
        Customer Relationship Management-->Master Data->Organizational
        Management
         A. Division Settings->Define Divisions
         B. Organizational Data for Sales Scenario-->Define Distribution Channels
    If helpful, Do reward points.
    Regards,
    Shalini Chauhan

  • Sales area and sales office not displyed in bp

    Hi all,
    i'm new to crm , when i'm creating BP i'm not getting my sales area and sales office data in BP sales area data tap. Please provide me solution for this issue.
    Thanks and regards
    kesav

    Hi prassana,
    Thanks for your reply. I have maintained my org model and maintained attributes, country  in org units and i have checked sales scenario bust still my sales area not determined in my bp level. i wanted to know where can i check org determination?, Please give me any another solution for this issue.
    Thanks and regards
    kesav

Maybe you are looking for