Sales Based Contract : Error : Selec a valid settlement

Hi,
Iam new to the RE Module.
Whil doing the TCODE : RESRSE, iam getting the message as 'Select a valid settlement'.
Contract details are as follows:
Condition type is selected only one that is the Sales based and it is statistical.
Sales quantities has been updated.
Sales amount given in the "Sales Rule" - Calculation.
I've given the validity dates, posting date, settlement date correctly.
My question is : Here, is actual condition type (like any rent) are necessary to get calculate and settle the sales ?
If the actual condition type is not necessary then what would be necessary things to be updated ?
Please reply with your inputs.
VVR

Hello
Pls check the below:
1. Before RESRSE, the respective sales figures should be available in the Contract or if no sales available Tick Zero Sales upto the period for which the sales settlement you would like to do.
2. In RESRSE, in addition to default fields like Co Code, Contract No, etc select Settlement Method Simulate, Settlement Type as Standard, Settlement schema as Using Actual AP, Settlement step as 05 Simulation of Posting Costs.
3. In Selection of Sales Rule tab, give Settle Upto Date.
4. In Parameters tab, give Text, Posting & Doc Date, Posting Period, Baseline Date as per the requirement.
Now execute and see. If successful remove simulate and select execute in Settlement Type.
Regards
Amarnath.R

Similar Messages

[Sale Based Rent] RESRSE- Settlement step Processing of SBR not successful

Hi everyone,
While processing Sale Based Rent Contract by RESRSE,
I got some errors as below ( I'm using Cod Type: Sale Based Rent of System)
Step Posting of Sale Base Rent in Financial Accouting perform on 21.12.2011 at 11:14:4
Message for Receiving Posting
LO REC 4000/HAS 01/50, period 01.02.2011- 28.02.2011, settlement step Processing Sal
LO REC 4000/HAS 01/50, period 01.03.2011- 31.03.2011, settlement step Processing Sal
Message for General Cashflow Records
LO REC 4000/HAS 01/50, period 01.02.2011- 28.02.2011, settlement step Processing Sal
LO REC 4000/HAS 01/50, period 01.03.2011- 31.03.2011, settlement step Processing Sal
Message for Object Transfer
LO REC 4000/HAS 01/50, period 01.02.2011- 28.02.2011, settlement step Processing Sal
LO REC 4000/HAS 01/50, period 01.03.2011- 31.03.2011, settlement step Processing Sal
Message for Transfer of Advance Payment
LO REC 4000/HAS 01/50, period 01.02.2011- 28.02.2011, settlement step Processing Sal
LO REC 4000/HAS 01/50, period 01.03.2011- 31.03.2011, settlement step Processing Sal
I thought I was missing somethings. Please advise!
Regards,
TienLQ

Hi Li,
It is very difficult to find out what went wrong basing on message number, that to message class RECAPR is common message class and it will be used everywhere in RE process (settlement, periodic postings ......)
if you provide some more details, somebody can help you.
I think all your error message relates to same issue, provide error log details for any single step.
rgds,
Srini

Item Interface error - "The Cost of Sales Account specified is not a valid"

A week back we migrated from 11.5.10 to 12.1.3
Since then, many items are failing in Item Interface with the error "The Cost of Sales Account specified is not a valid account or has expired in organization ITEM MASTER INV."
Item Master being the 'Inventory master organization'. I checked the cost of sales account & sales account. and they are Valid also their corresponding segments are valid in their respective value sets.
Log message for 'Item Import'
Import Items
Argument 1 (ORG_ID) = 167
Argument 2 (ALL_ORG) = 1
Argument 3 (VAL_ITEM_FLAG) = 1
Argument 4 (PRO_ITEM_FLAG) = 1
Argument 5 (DEL_REC_FLAG) = 1
Argument 6 (PROCESS_SET) = 77
Argument 7 (MODE) = 2
Argument 8 (Gather Stats) = 1
TRANSACTION ID : 42878726
ORGANIZATION ID : 174
TABLE NAME : MTL_SYSTEM_ITEMS_INTERFACE
COLUMN NAME : COST_OF_SALES_ACCOUNT
MESSAGE NAME : INV_IOI_ERR
ERROR MESSAGE : The Cost of Sales Account specified is not a valid account or has expired in organization ITEM MASTER INV.
TRANSACTION ID : 42878726
ORGANIZATION ID : 174
TABLE NAME : MTL_SYSTEM_ITEMS_INTERFACE
COLUMN NAME : SALES_ACCOUNT
MESSAGE NAME : INV_IOI_ERR
ERROR MESSAGE : The Sales Account specified is not valid or has expired for the organization ITEM MASTER INV.
Please help.

The Cost_of_sales_account & Sales_account as defined in the MTL_PARAMETERS are different from those in MTL_SYSTEM_ITEMS_B for the corresponding item. The values for these accounts in the interface tables are same as that in the MTL_SYSTEM_ITEMS_B table and hence not same as those defined in MTL_PARAMETERS.
Actually we have a Custom trigger on the MTL_SYSTEM_ITEMS_B table which updates these accounts, once the item is created in the Master Organization.
To verify this issue, I updated the accounts on the MTL_SYSTEM_ITEMS_INTERFACE table to match with that of MTL_PARAMETERS. Ran the 'Item Import', now those records are processed.
Does this means that, the Interface is validating the cost_of_sales_account & sales_account to match with that of the 'Organization' ??.
But we never had this issue in 11i. Is this a part of R12??

Non Cat Requisition gives error: "contract number - select a valid value"

Hi Guys
I wonder if you can help me please. After we've loaded these 3 patches:(7427952,6987692,6813613) when we create a NonCatalog Requisition and select a contract number with less than 4 characters, we get the following error: "contract number - select a valid value". But when we select a contract with more than 4 characters, it works fine. So in other words, it only takes contracts with 4 or more characters. Has anyone encountered this problem? Something has been changed by the patches, but we can't figure out what exactly. Any help would be appreciated.
Thanks

Hi,
Review the following note, it may be helpful.
Note: 756376.1 - Error: 'Select A Valid Value' When Adding a Section to a Contract Template
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=756376.1
Regards,
Hussein

Sales Agreement workflow errored on 3205: is not a valid role or user name.

Hi experts,
We're currently on EBS R12.1.2 We're running into an issue that seems like a very general issue that other businesses would have encountered before. We have a business user who creates most of sales agreements. When this business user left the company, we set active end date on the particular userid. Now, when we go into these sales agreements originally created by this particular userid, and put in the expiration date to expire these sales agreement. We're seeing the sales agreement workflow erroring out in the pre-notification workflow email with error 3205: is not a valid role or user name.
It seems to be this is a very typical business scenario. If you have encountered this problem, please share how you resolved this issue within your oracle apps environment.
Thank you in advance for your help,
Jennifer

Hello,
We have the same problem in 11.5.10.2. If we want use this blanket sales agreement I have to skipped this notification by sysadmin and after this I can extend end date and another user can use this BSA.
Look at Extend The Expiration Date For Closed Non-Active Expired BSA Blanket Sales Agreement [ID 1394888.1]
Regards,
Luko

RE : Sales based rent agreement- additional reporting rules

Dear Friends
I have created a contract with relevant to Sales tab flaged.
The starting date of the contract is the middle of the month and the agreement with the Business partner is to make sales based settlement on an monthly basis i.e in days as the contract start date is in the middle of the month and on monthly for rest of the period. In fast entry for new sales rules, we specified the frequency start date and frequency in months and also gave settlement frequency in the same way and then attach condition types to the sales rules.
Since the frequency is reporting rules is given in months, and the system caculates the report for 30 days extending to the next month also.
For your easy understanding I have explained the issue with an example:
Contract Start Date 23.03.2008
Contract end date 22.03.2010
Reporting rule frequency 1 month and start date 23.03.2008
Settlment frequency 1 month and start date 23.03.2008
The settings in Frequency start to "Start of Calender year" in Posting parameter has no effect on reporting rules.
Now I need to run the sales based report as per the following
From 23.03.2008 to 31.3.2008 i. e for 9 Days and after that
every month i. e from 01.04.2008 to 30.4.2008,01.05.2008 to 31.05.2008 and so on
I request you to kindly help me as to how I can overcome this issue
Thanks & Regards
Panda

The issue was relating to both
1) the grading which must have a highest level defined as from X to $0.
2) The condition for the sales rule must have a valid from date. If not, the error displayed is "No sales rule specified" but its actually the related condition that is failing.

Wrongly posted Sales Based Rent

Hello,
I have posted a SBR with Sales volume Zero. Now, we realised that there is a sales value for that period. Can you please advise how to correct it.
Should i input the new volume in RESRRP and run RESRSE again or should i reverse the old SBR and input the new sales volume and post it again.
Kindly advise.
Regards
Saravanan.A

Hi Saravanan
What you guessed is right. You need to update the sales (whether with RESRRP or manually within contract) which will result in new versions. But then, instead of RESRSE run RESRSECORRECT (Correction of Sales-Based Settlement) if reversing cannot be made.
Regards, Sekhar

Sales based data migration through LSMW BAPI (BUS1505) change

Hi Everyone,
keep getting this error message while trying to load sales based scenario.
there is neither no term category in the sales rules's structure nor it is in reporting rule's structure.
error message
Term category 1410 cannot be used in sales rules
Thanks in advance.
Regards,
John

John,
That is hilarious I know that feeling.
Not sure why you are getting this error but try following -
1. Make sure your file does not have data in cells which you don't use.
2. Structures which you do not want to pass any values in, do not pass those structures at all. Means if you wish to change only business partner then user only 1 structure and one header record for identifying the contract that is it. Do not pass any other structure not even blank in the file.
3. Make sure in source to target mapping you have made correct assignment if by mistake you have made incorrect assignment you will get bad data.
4. When you read your data execute step display read data and review where you see 1410.
5. Similarly when you execute Convert step in LSMW execute display converted data and you will see if 1410 was populated.
last step if none of the above works ) Display the conversion program and put a debug point at this particulat field and see from where this value is being passed. This is no standard error so it has to be your LSMW/Input file.
Let me know what it was
Jag

Error while transferring Forwarding settlement document to ERP Billing

Hi Experts,
My forwarding settlement document is consistent.
All the basic customizing in SAP ERP, TM has been completed as follows, but getting error while transferring forwarding settlement document to ERP billing (Ref. 1st screenshot).
I am using SAVE AND TRANSFER button to send the document to ERP, also same error is displaying while using PREVIEW INVOICE button (Ref.2nd screenshot)
Please suggest if I missed anything to send forwarding settlement document to ERP.
Customizing settings for transferring Forwarding settlement document to SAP ERP.
1. In SD Billing all condition types has been maintained, pricing procedure determination configured.
2. In SAP ERP SD condition types mapped to TM charge types using following path.
Integration with other sap components - Transportation management - Invoice integration - Billing - Definition for transportation charge elements - Define charge types.
3. Assignment of charge types in ERPSD
4. Define charge category, subcategory codes
5. Mapped ERP SD, TM sales organization with logical TM system, sales area, Order type, Billing type, Pricing procedure
6. Output types determination configured for ERP Billing in SD

Dear Serhat,
I don't think this is an RFC problem or an error. But you wrote:
When I checked why its value is 'X', I saw that if the RFC destination and the current system are the same, then lv_no_commit = 'X', (means if the R3 and the GTS are in the same server, same client.)
It is impossible to have GTS and R/3 on the same system and same client. At least the client should be different. So try to check why the call is performed like that.
Balazs

Sale Based Rent- You are not allowed to change sales-based rents

Hi everybody,
While processing a sale based rent using T-code : RESRSE, I got the problem as below:
At the Log Display Screen:
Step Processing of Sales-Based Rents performed on 19.12.2011 at 17:00:02
Status of step: You are not allowed to change sales-based rents.
Runtime for step: 00:00:00.
Does anyone experience this issue? Please give me a hint to solve it?
Thank you very much.
Regards,
TienLQ.

Hi Franz,
"I guess that the parameter 'Change Direct.' in the details is set that a change is allowed." You're totally right.
I missed it. After I did the changes for this, the process for Sale Based Rent is good but I couldn't posting the result.
I saw that EhP4 has introduced a new feature whereby we can post sales based settlemnet using periodic posting feature. For this, a checkbox is introduced in the system which we have to check in the contract and is named as 'Post using periodic posting'. I dont see this indicator in my system even though I am on Ehp5.
Could you please advise?
Regards,
TienLQ

GTM - One Side Trading Contract - error

Hi All,
I am trying to set up the system for GTM.
I managed to do the config. I assigned pricing procedure VKP003 for a sales area. This is working fine with the two sided contract. However when I try to create a sales trading contract there is no pricing procedure assigned and I am having an error "7 WV E 195 No entry for sales price calculation control exists for key VKP003 ENDPR". But I have assigned WWS003 as the sales pricing schema for a pricing type and assigned this pricing type to the plant. I dont understant why this is not picked up. Any help is much appreciated.
Thank you in advance.

closing...

Bill plan of a Sales Order/Contract

Hi,
Where do we create/update the bill plan for a sales order/contract.
I tried VA41 where a bill plan button is provided. But need to understand the bill plan from a functional perspective.
Any short summary on the same will be helpful.
Also please provide Transaction/steps to update a bill plan.
Thanks.
Shreyas

Hi
A billing plan is a schedule of individual billing dates
for a single item in a sales document.
You can define a billing plan at header level, which is
then valid for all items assigned to it.
During sales order processing, the system determines from
the item category whether a billing plan is required and,
if so, which type of plan: The type of billing plan that
is determined at this point is set up in Customizing and
cannot be changed in the sales document.
For each billing plan you create, you can enter a freely-
definable search term in the details screen of the billing plan in the sales document.
When you save the document, the system automatically
assigns a number that later uniquely identifies the
individual plan.
You can use the search term later to locate specific billing plans.
Transaction code for Sales order - VA01, VA02 & VA03
Kindly check the following link for more information on Billing plan:
http://help.sap.com/saphelp_47x200/helpdata/en/dd/560674545a11d1a7020000e829fd11/frameset.htm
kindly reward points for useful answers!
best regards,
Thangesh

Error "10000180 Specify valid tax code" after upgrading 2007 to 8.8 PL15

Hi all,
In one client, I've upgraded the database from 2007 to 8.8 PL15.
When I try to add an Invoice or Sales order in 8.8, the system gives an immediate error "10000180 Specify valid tax code" and does not open the standard Invoice form to add a new document.
The same happens when I select other sales or purchase menu options.
I checked the tax definition (VAT table) and everything seems fine.
Does anybody know what can cause this error?
It must be related with 8.8 version, since in 2007 it worked fine...
Thanks all,
Manuel Dias

Hi Syed,
After some long checks, I've discovered the problem: after the upgrade, the VTG1 table had wrong value keys (01, 02, 03 and 04) against the OVTG table (which was 1,2,3 and 4).
I've done a manual update of this entries and then it worked.
Thanks anyway,
Manuel Dias
Edited by: Manuel Dias on Mar 28, 2011 9:46 PM
Edited by: Manuel Dias on Jun 21, 2011 10:04 AM

KO8G-sudden surge of error mess(Maintain the settlement rule of the sender)

hi!
we encountered a lot of error message(Maintain the settlement rule), more than 4k, after we run KO8G, this is the first time happened to us. when we checked the PM orders from the error message, most of it came from previous periods even previous years, which are already closed. we can understand if there are posting for the said order for the period, but there is none. why those closed orders with no postings, still read by the settlement? were having a diffuclty of checking it one by one, we only expect less than 100. we hope you can help us.
thanks in advance
vince

Dear,
As found...
Maintain only the FROM DATE... Remove the TO DATE as 10.2010 (Extend the TO DATE)
OR
Create a new settlement rule which is valid in the Period of Execution of settlement
Regards,
Syed Hussain.

Business Flows for Sales and Contracts process

Hi,
I needs Business Flows for sales and contracts process for my project.
Does anybody knows where i can find these BFA ?
Thanks
Regards
Mehdi

Hi mehdi;
Please check below and see its helpful:
R12 Responsibilities And Roles Based On Business Flows [ID 406401.1]
Regard
Helios

Sales Based Contract : Error : Selec a valid settlement

Similar Messages

Maybe you are looking for