Sales District in Sales Order

Hi All,
i create a Sales Order with these characteristics:
Header Level:
SOLD TO PARTY: A
Item Level:
Item 10: SHIP TO PARTY B
Item 20: SHIP TO PARTY C
Item 30: SHIP TO PARTY A
I have substituted manually the ship to party of Item 10 and  Item 20 in  Item Details/Partner tab.
It's all ok, but the field Sales District in Item Details/Sales B tab, is the same of SOLD TO PARTY A, for all three items.
Why it doesn't change automatically when i replace the ship to party of item 10 and item 20?
There is a way to change it automatically?
Best Regards
Alba

Thanks a lot,
yes i need this field for statistical use... and for COPA analysis.
My colleagues of CO would like use this characteristic in function of different ship to parties in the order.
If i have a sales order, with ONE sold-to-party and three item-lines with THREE ship-to-parties, the COPA Analysis want to know the three sales district of ship to parties, not the sales district of SOLD TO PARTY.
The problem is that SAP users would like to change, at item level, only the ship to party and not the sales district, too. I would like to know if there is an automatic way to change sales district at item level in function of changing ship to party.
Thanks in advance
Best regards
ALba

Similar Messages

  • Mndatory sales district in sales order

    Hi experts,
    How to make sales district mandatory in sales order(va01) with the help of customization other than userexit/field exit
    I can not use incompletion procedure because we have to give error message if this field is not filled.
    Also this must be applicable on some order type
    Thanks in advance.
    Regards,
    Dharminder dalal

    Hello Dharminder,
    You can acheive this with Incompletion Procedure.
    Define & Assign the Status Group with Tick mark in Check Box on General & other check Box. At the time of Saving the Sales Order system will clearly give warning message & list the feilds that are incomplete.
    Alternatively, you can make Sales District Feild Mandatory in Sales Order by creating Screen Variant & assign the same to particular Sales Document Type. Just search forum with "Transaction Variant" & you will get necessary guidence.
    This will clearly give a error message that Sales District feild is not filled. 
    Hope this helps,
    Thanks,
    Jignesh Mehta.

  • Sales office and sales group and sales district

    what is the difference between Sales office and sales group and sales district,
    please explain,
    Thanks

    hi
    sales office
    A organizational unit in a geographical area of a sales organization.
    A sales office establishes contact between the firm and the regional market.
    sales group
    A organizational unit that performs and is responsible for sales transactions.
    sales district
    A geographical sales district or sales region.
    You can assign customers to a sales district and use the sales district to generate sales statistics.
    regards

  • Sales District and Partner function relationship in customer master

    Hello there
    I am working on a report and need to know one table relation for sales District and Partner function 
    i have a requirement , where i want to list all the partner number/Partner function assign to the customer with ref to the sales District
    we have one partner function Tab at sales Area tab in customer master , and another when we click on Sales district tab at header will get another window where we maintain partner function relate to the sales District , i want to have all those partner function in report , can you please help me where i can find that in table ? when i do F1 its says  KNVP but that table maintain at the sales area leval , not for the Sales District !! if you can help
    thanks
    Sonam

    Hi Sonam -
    and another when we click on Sales district tab at header will get another window where we maintain partner function relate to the sales District
    Do you have custom table/maintenance for sales district? Are you not maintaining Sales District in Sales Tab of customer master.
    You have to look for the field and table where you have maintained sales distict along with Customer and join the customer with KNVP customers and get all the partners.
    For Example - if you have mainationed sales district in KNVV table of BZIRK field then you have to join KNVV -KUNNR with KNVP-KUNNR and extract all records of customer distict and associated partner functions.
    Let me know,if the given solution is not applicable for your case.
    Thanks
    Amit Gupta

  • Sales district and account group

    how to create a new sales district for a customer?
    and for creating a customer can i assign existing customer account groups? or should i create a new account group like sold to party X.
    And how to create and assign number ranges in account groups?

    Hi
    To Create Sales District:
    IMG - Sales and Distribution - Master Data - Business Partners - Customers - Sales
    1. Define Sales Districts
    No assignment required here, the details will automatically available in Customer Master Sales view screens.
    Create customer account groups:  OBD2
    SAP Customizing Implementation Guide | Financial Accounting | Accounts Receivable and Accounts Payable | Customer Accounts | Master Records | Preparations for Creating Customer Master Records | Define Account Groups with Screen Layout
    (Customers)
    Creat number ranges in account groups: XDN1
    SAP Customizing Implementation Guide -- Financial Accounting --   Account Receivables & Payables -- Customer Accounts
        Master Data --  Create Number Ranges for Customer Accounts
    Assign number ranges in account groups: OBAR
    Financial Accounting -- Account Receivables & Payables -- Customer Accounts -- Master Data -- Assign Number Range to customer account groups
    for creating a customer can i assign existing customer account groups?
    if there is no need of creating new account group then yes u can use the same else create new one

  • Authorization for Accounts(Sales district) and Sold-to parties

    Hi Experts,
    I have a requirement where I wanted to restrict Sales districts(Accounts) & Sold-to's depending on the employee responsible for.
    The requirement goes like this.
    There are Sales districts. Each Sales district has around 4 to 5 Sold-to parties.
    For each Sales district a sales manager is responsible, and for each sold-to party a sales group is responsible.
    Now when a manager logs in using his logon credentials then he should be able to see only the sales districts(Accounts), he is responsible for and the sold-to parties for that particular Sales district(Account).
    But when a sales group logs in , he should be able to view only his sold-to parties, which he is responsible for.
    Any clue on how to achieve this requirement.
    I have used CRM_ORD_LP, CRM_ORD_OP & CRM_ORD_OE but they are related to actvities, leads & opportunities authorization objects.
    How about Sales districts (Accounts)? How can I restrict it to Sales districts(Accounts) for managers and sales representatives?
    Thanks in advance.
    Rohan

    If you don't need to restrict access to all customers but only to propose customers assigned to certain salesman you could probably do it via partner determination rule where you would say when the employee responsible is entered in sales document that customers belonging to this salesman are proposed on selection screen.
    If you need to restrict it then I think you have 2 choices:
    - use ace to restrict by sales district
    - create Authorization Groups, assigned them to customers and then create pfcg roles for salesman providing in pfcg access to certain Authorization Group. in pfcg you use B_BUPA_GRP object. But the problem using pfcg is that you will have to create as many pfcg roles as many salesman you have and this can be a huge thing.
    So ace will probably be more appropriate.

  • Blocking/Deleting Sales District & Sales Group

    Hi !
    Can we block or delete any member of a Sales District or a Sales Group?
    If we can delete, will there be implications of any kind while using customers created with the deleted Sales District or Sales Group member?
    Thanks.

    Hi,
        You can delete the Sales Group in the Assignment. But the system will not accept to enter the deleted sales group or sales district in the customer master.

  • Sales district field in Quotation/Sales order

    Hi Gurus,
                  on which screen i can see the "Sales district" field in Quotation/Sales order/Inquiry?
    Thank you
    ANil

    Hi,
    In Inquiry :
    Menu Bar : Go To: Header : Sales : Below u can see under Pricing and statistics
    Same in Quotation and Sales Order.
    Thanks,
    Raja

  • 1 sales order with 2 sales districts will spilt invoice into 2

    Hi,
    We have one issue here. We would like to create one Invoice based on two different sales districts.
    After we key in one sales order with two differennt sales districts, the system generated only one sales order and only one Delivery Order, but unfortunately the system split the Invoice into two invoices.  Instead of spliting into two, can I combine the invoices into one. Meaning, One Sales Order, generate One Delivery Order and One Invoice?
    Kindly please advise. Thank you.

    Hi Sim,
      Invoices can be combined if your bill to party and the billing date of all the invoices are same.
      This can be done througuh transaction VF06.
      You can also check the transaction VTFL for your corresponding delivery and billling type and for your item category field  VBRK/VBRP should have the value single invoice(routine -03).
       Reward points if it helps.
    Regards
    Karan

  • Sales District in a sales order

    In the customer records the Sales District field (BZIRK) is entered on on 10% of the customer records.
    When a Sales order is created details are copied from the customer record and the Sales District is entered into the item SalesB tab.
    The users need to decide on the correct sales district for that sales order. this may not be the one recorded on the customer details. Not that this is necessarily inaccurate, just not the right one for this sales order.
    I have two queries:
    1 How can the sales district NOT be copied over to the sales order
    2 How can I make an entry in the Sales Order mandatory
    I am sure that this is a config thing.

    Dear Nigel,
    1. If your order is copied from a reference document (quote etc) then you can clear off the variable VBKD-BZIRK in a copy control data transfer routine in VTAA between the source quote and target order types
    2. In any case, you can clear off VBKD-BZIRK in the user exit routine userexit_check_vbkd in MV45AFZB include. I just tried this by putting a break point in the aforesaid routine and can confIrm, that clearing VBKE-BZIRK here will clear it off in Goto -> Header -> Sales while creating the order in VA01. You too can confirm this by putting a break point in the routine userexit_check_vbkd
    3. Regarding adding VBKD-BZIRK to incompletion log, first check out the incompletion procedure assigned to your Sales order type in VUA2. Come to OVA2, select Group 'A'  (Sales header) -> Click on Procedures -> Select the Procedure assigned to your Sales order type -> Click on Fields -> add the entry like below
    Table Fld name  Description     Screen  Status
    VBKD  BZIRK     Sales district  KKAU    01
    KKAU means Sales -> Header screen in VA0n transactions and status 01 means general incompletion error
    Best regards,
    Vishnu T

  • Changing Fields Historically on Billing Documents - Sales District

    Hi
    Is it possible to change fields historically on a billing document ?
    I wish to change the sales district (VBRK-BZIRK) on Historic Billing documents.
    This is due to an external reporting system we use - Business Objects.
    I am able to change the same field on the sales order VBKD-BZIRK, but not on the Billing document
    Is there a MASS change program available to use at all ?
    Please advise
    Many thanks
    Tony

    Hi,
    Yes,you are right.
    We cannot change them in billing document.
    There are two options.
    1)Cancel all those billing documents using VF11 T.code.and mass change the sales order.Recreate the billing document using VF04 T.Code.
    2)Develop a program for this.Using Batch job I think you can change.
    Regards,
    Krishna.

  • Sales District problem inn  2LIS_12_VCITM as its available in datasource

    Dear All.
    i have modify the standard cube 0SD_C03 and added a Sales District in Organization dimension my requirement is to show the Incoming order quantity, Delivery quantity and Billing Quantity with respect to Sales District / Region.
    i am filling the 0SD_C03 cube with the following data sources 2LIS_11_VAITM, 2LIS_12_VCITM and 2LIS_13_VDITM
    but when i run the report the data is inconsistency due to the document type Deliveries does not filling the Sales District.
    when i check the RSA3 extractor program both the other datasource are showing the Sales District data but 2LIS_12_VCITM is not displaying the Sales District field but this field is available in the datasource.
    i try alot because according to the documentation it is quite straight that data source 2LIS_12_VCITM contain the Sales District field and it is available in LBWE.
    it is not showing in the RSA3 extractor and nor filling the cube.
    i am using BI7.0 and connecting with SAP 4.7.
    any help will be highly appreciated.
    Kind regards,

    Dear Ramesh.
    i haven't change the extractor i only change the InfoCube 0SD_C03 by adding the Sales District characteristic the field sales district already there in the datasource 2LIS_12_VCITM i can see it in R/3 using LBWE.
    but when i load this datasource in my cube there is all data but the filed sales district is empty and this is only for this datasource the other two datasources fill the data along with sales district field.
    then i check this datasource in RSA3 in R/3 side and it also not showing the data for this field, but this filed is part of the datasource.
    i hope i have clear the question.
    kind regards,

  • Sales District updation in Delivery header table

    Dear Gurus,
    Sales district is mandatory field in customer master and is copied to the sales orders, when the delivery document is created the sales district is not copied.
    Is there any technical way or customization process to update the sales district in LIKP.
    In this project we ARE NOT USING shipment and transportation process.
    the process implemented here is Sales Order creation, followed by delivery creation (picking and Post goods issue) and finally Invoice creation and posting to accounts.
    Kindly help me in achieving the updation of Sales district in LIKP table.
    Thanks and Regards
    LR

    Hello,
    The current copy control setting between the sales order and delivery is as per the standards.
    ie 001 - Header
    Please suggest a better approach whether:
    Data Transfer routine - 001 -Header (FV50C001) which is a default routine to be copied and add the logic of updating the sales district in delivery header and maintain in place of 001
    or
    copy the Data transfer routine - 002 - Business Data ( FV50C002) to a new routine activate the logic of copying the sales district from VBKD to LIKP and maintain in place of 001
    The replies suggested by seniors is very helpful.
    Kindly help me to come out of my confusion.
    Thanks and Regards
    LR

  • Can Any one tell me. System considering the Sales District also in Delivery Split which is not in standard. How to resolve this. Please help me

       Hi
    Can Any one tell me. System considering the Sales District also in Delivery Split which is not in standard. How to resolve this. Please help me

    Dear Srikanth,
    I am not sure, if my answer will satisfy you, but anyway I will try:
    Field Sales District is technically called BZIRK. In delivery structure is this field located in header (table LIKP), what cause split, if origin document (Sales Order) has different Sales District in some positions. This is standard program behavior. Basically it shouldn't happen, as value is taken from customer master (Sold-to Party) and copied to header and items of sales document. But user can manually changer for particular items.
    Well, to solve situation you have few ways:
    1. Do not allow users to change value on items - can be managed by organizational decision or by authorization concept.
    2. If there is a reason to have different Sales District in items, then it can be managed in in routines for copy control between sales and delivery documents (delete value of BZIRK for all items for instance). But then will be this information lost for further usage. It seems to me to invoice is value copied directly from sales order (field VBRP-BZIRK_AUFT) then it mustn't be a critical for analyses.
    3. Your situation also can happen if you wants to collect more sales documents to one delivery. In this case can be that Sales District is different for same customer in different sales order (even seems to be little bit strange). Then solution from point 2 can help as well, I believe.
    Best Regards
    Arnost

  • Sales district

    Hi experts,
    what is the  table name to find sales district for a sale order.
    Thanks.

    Hi,
    Field name is <b>BZIRK</b> & table name is <b>VBRK & VBKS</b>
    Reward Points if it is Useful.
    Thanks,
    Manjunath MS

Maybe you are looking for