Sales Document Flow - Ref. Value not showing correct currency
I have a question about document flow currency in ECC6.0. We recented upgraded to ECC6.0 from 4.7 and noticed the changes to document flow. We are a US based company with sales offices in Europe. Our European offices are finding that that document flow in ECC6.0 shows in base currency of USD. Even thought the sales order was entered in EUR euros. Is this intended to be this way; since it is causing our offices in Europe some confusion? I searched forums an SAP notes and did not find any references. Has anyone see this in ECC6.0
Example Document Flow: Line Level (I do not see Ref Value at header level)
Note Sales Document was entered in EUR euros.
Document Quantity Unit Ref. Value Currency
Standard Order 0025082768 / 10 12 EA 5,207.54 USD
...Delivery 0080211725 / 10 12 EA
.....Picking request 20100423 / 10 12 EA
.....Handling unit 0001221687 / 1 12 EA
.....GD goods issue:delvy 4901261948 / 1 12 EA 1,690.08 GBP
...Invoice 0092006736 / 10 12 EA 5,207.55 USD
Accounting document 0092006736 12 EA
If I highlight top line in document flow, I see the following in lower part of screen. This is the currency entered on the sales order.
0025082768 10 12 EA 3,847.80 EUR
Smile,
Thanks for pointing those configuration points out. I checked my system and found the following. I do not see any change documents for the configuration points, so they have been set this way since our implemenation in 2005.
XD02 is customer master change, the customer on my order is set to EUR in sales in distribution tabs.
OX02 - Company Code
1000 Middleton USD...ok
2000 London GBP ok
2100 Munich EUR...ok
2210 Amsterdam EUR...ok
4000 Hong Kong USD...ok
I think OVX5 is not set correctly, should be same as OX02. If I change them, do I need to run an update in the system for old data? Or is it as simple as changing the value here? I'm hesitant to change this not knowing how this will affect the system. Do you know?
OVX5 - Sales Org
1000 Middleton USD...ok
2000 London USD should be GBP
2100 Munich USD should be EUR
2210 Amsterdam USD...should be EUR
4000 Hong Kong USD...ok
Thanks,
Tony Romain
Similar Messages
-
SharePont 2013 Document Library lookup Column Properties not Showing Correctly when editing in Word
Hi
I keep seeing this issue albeit intermittently. I have set up a doc library for my users which has a custom content type (lookup, metadata columns, etc) . They all appear perfectly most of the time except the lookup column. Sometimes is just
decides to display the title field of the current library and not the lookup list title . It is weird as it has been working perfectly for ages given the library is populated with valid documents.
There are some fixes listed here. Has anyone got any experience of this?
https://social.msdn.microsoft.com/Forums/azure/en-US/e0b55531-509c-4219-8113-61b3e488de69/document-library-metadata-properties-of-a-content-type-do-not-show-correctly-when-editing-in-word?forum=sharepointdevelopmentprevious
Freelance consultantHi,
According to your post, my understanding is that the lookup column not display well while editing in word.
Did you customize the Document Information Panel?
I recommend you edit your custom document information panel or create a new document information panel, then re-publish it to check whether it works.
https://support.office.com/en-gb/article/Create-or-edit-a-custom-Document-Information-Panel-for-a-content-type-b701a9af-3ea6-4c1a-9e1c-75363bd987c9?ui=en-US&rs=en-GB&ad=GB
Or you can also use the methods in the post you have pasted to check whether it works.
As the limitation of the environment, we could not reproduce the issue in our environment.
I would suggest you open a case to Microsoft Customer Service via Phone.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
finder is not showing correct file in cover flow mode. The files shown in the top panel are one file off.
This problem occurs after I move a file or files to trash. If I remove one file, then the sequence is one file off, if I move two files to trash then the sequence istwo file off. For example, if I delete file 1 and highlight (click on) file 3, then the cover flow panel shows file 2, when it should show file 3.
-
Sales Order -- Purchase Req -- Purchase Order ..... Sales Document flow??
Hi Guys,
We have a process where we proccure few parts externally. When a sales order is created in our system based on the item category config we are able to create a purchase requition automatically. This Preq is further used to create a PO based on which the purchasing group proccures the part from the vendor.
We are trying to identify if there is a way to find out a way if we can relate the PO number created in the sales document flow? Currently we are not able to view the PO number in the sales document flow. We are trying to identify if this is possible and if yes what needs to ne configuered to enable PO number linking in sales document flow?
Any pointers?
Cheers
VJHi Bikash,
The PO field which u r referring to on the VA01 screen is the PO number against which a SO is created. This PO number is the customers PO number. My requirement is i need to store the Intercompany PO number which is the PO number created to procure the part externally from the vendor. So its the vendor PO number and not the customer PO number.
Secondly if i try to misuse any other field to store this PO number it dosent make sense as it would not show up in the document flow screen so it would be of no use to us. We want to enable it the std way and i am sure SAP has provided some way to do it.
I check the OSS notes and found some interesting tips working on that hopefully should be able to resolve it.
Cheers
VJ -
Address not showing correctly in quotation Smartform
Hi Guru's,
We created smartforms for Quotaions. Based on Plant we selecting address.
For some quotaions address template table displaying fine. For few quotations its not working fine in printprivew mode.
Template table is same length for all. Also i checked for items . For some quotations items are more than 20 its also working fine. For some quotations items are 1 or 2 but its not working fine. Plz give any suggestions
Thanks & Regards,
Meenakshi.Hi rajesh,
Thanks for viewing my thread..
Actually we created smartforms for Quotations. Based on plant we are picking address and displaying dynamically.
while executing it shows correctly for some sales document no's and not displaying for some sales documents no's..
Can you give some suggestion why this occuring
Meenakshi -
The onhand quantity at sub inventory level it is not showing correctly
For an item the org level quantityt is showing correctly but at sub inventory level it is not showing correctly.
1)For an item org level the avilablty as below :
On Hand / Avail to Reserve / Avail to Transact are
oRG level 7 7 7
STAGING 7 7 7
STORES 0 0 0
2) Created an Sales order with quantity 5 ,then STAGING decreased by 5 which is correct.
the avilablty as below :
On Hand / Avail to Reserve / Avail to Transact are
oRG level 7 7 7
STAGING 2 2 2
STORES 0 0 0
3) Shipping Transaction not completed,Received 4 into Stores – Staging avail increased by 6 and even STORES also increased by 4 . Here we do not understand why STAGING increased to 6.
the avilablty as below :
On Hand / Avail to Reserve / Avail to Transact are
oRG level 7 7 7
STAGING 6 6 6
STORES 4 4 4
4)Ship Transaction Completed sucessfully now the values are showing correctly.
The avilablty as below :
On Hand / Avail to Reserve / Avail to Transact are
oRG level 7 7 7
STAGING 2 2 2
STORES 4 4 4Hi Patel,
You can create a confirmations using CO11N for sub-operations, but you can only confirm hours, not yield quantity. The yield quantity requried to be confirmed in the operation. You can partially or fully confirm sub-operations.
Enter the order number, sub -operation number all the related data will be displayed execpt greyed quantity fields.
Can you see the "sub-operation" entry field below "oper./activity" in CO11N ?
Thanks & Regards,
Ramagiri -
Balance Sheet not showing correct sign for Liability and Equity
Hai,
I am using SAP PL 40,
In SAP Balance sheet Report,
Liability Ledgers and Equity Ledgers is not showing correct sign. i mean,
In my Liability Ledger the value is
INR-10000.
In Balance sheet it showing
INR1000.
And also, is it possible to bring Dr and Cr column in Balance Sheet?
Now, it's coming in single Column.
Please help me out.
Regards,
Thanga Raj.K
09710445987Hi
It's the system definition that under Standard Balance Sheet Report, the
Liabilities are displayed with POSITIVE SIGN although we know that the
balance for those liabilities accounts are negative. The reason for it
is that the liabilities accounts are defined as Passive Account, so when
the balance is negative, it's displayed with positive sign. And when
the balance is positive, it is displayed with negative sign. The
definition is mainly for the purpose of the reporting. In most of the
localizations, the financial reports supplied by the business should
display Liability and Equity with positive sign.
If you really want to display them in negative sign , you can define a
customized report template in Financials->Financial Report Templates->
and select all liabilities and tick the box in front of 'Reversal Sign'.
Regards,
Syn Qin
SAP Business One Forums Team
Edited by: Syn Qin on Aug 22, 2008 8:49 AM -
MiniDV Video in Affert Effects not showing correct ratio.
I'd like to know how to edit minidv video in its aspect ratio in After Effects. Video is 720 by 480 and 16 by 9 (non-square pixels). When I import the video, it's stretched too tall (set to square pixels I believe). No mater how many times I change the composition ration to widescreen, it still does not show correctly.
I seem to do fine in Premiere. It automatically sets the aspect ratio for minidv video. But I can't get After Effects to do it. I don't want to spend time creating something only for it to be squished in Premiere later.
So how to do create a composition that's 16 x 9 using non-square pixels 720 by 480 that can be edited into miniDV video in adobe premiere?If you properly interpret your footage as widescreen (AE may guess incorrectly here) and put it in any square pixel comp it will not look distorted but it may or may not fill the frame. It will only fill the frame if the frame size is the square pixel equivalent size of your widescreen footage. This applies to all non square pixel aspect ratio footage.
If you interpret your footage as widescreen and put it in the same format (NTSC, PAL HDV) widescreen comp it will also fill the frame. There may be some black pixels on the left and right side because almost all cameras don't put live pixels in every column or even every row of the frame, but the footage will fill the frame. The caveat is that this footage will look distorted unless you activate pixel aspect correction preview in the Comp window because computer displays are always square pixels. You have to fool the display by selecting this option.
When you render your widescreen comp, if you're using any of the standard DV codecs or a codec like Quicktime Animation or JPG, there is no place in this codec for an aspect ratio tag that will tell apps like Premiere or FCP or Avid that this footage is supposed to be widescreen. Once you import the footage to another app you'll have to check and make sure that the footage is interpreted as widescreen there too.
I hope this helps. What ever you do, do not use the Fit to Frame option to force footage into a comp frame. If you insist on using Fit to Frame then check the X and Y scale values after you do and make sure they are identical. If they are not, you've distorted your footage at that point and it will be difficult or impossible to fix it later. -
Sales document flow(vbfa) entries are deleted
Hi Guys,
I am facing a problem with VBFA table. Actually for some delivery i am able to get Sales order number from VBFA table but for some delivery there is no records exists in VBFA table. So just want to know is there any program or Funtion module which delete entries from VBFA table if not then is there any functional configuration which not allowed to enter data in VBFA table. In my system i searched for all the programs and function module but no luck.
I can saw the Sales document flow in VL03N but no entries in VBFA table.
thanks,
BaidyaHi Guys,
Thanks for the replies.
But this is true for some delivery there is no entries in VBFA table but entries are exist in LIKP and LIPS. We are using userexit in sales order program for creating delivery. The Function module which creates delivery inside the USER-EXIT is : BAPI_OUTB_DELIVERY_CREATE_SLS.
If anyone face this type of problem please reply..
Thanks,
Baidya -
HT201317 The photo stream flower icon is not showing up on my icloud account?! Why?
The photo stream flower icon is not showing up on my icloud account. The only icons are Mail, contacts, calendar and iwrok. What can I do??
Basically Apple actually took away the Gallery capability we used to have with me.com when they replaced it with Photo Stream. So there is no way to see on the web, nor send a URL to friends to share the pictures like you used to be able to do with Gallery. To do that, you will need to push those photos to an external service such as Snapfish or Flickr or a social media site.
-
Not showing correct output when parsing the date
//WAP the gives the details of employees
import java.io.*;
import java.util.*;
import java.text.Format;
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
class employee
private String nm,curr_dt;
private Date dob,doj;
private int salary;
employee()
nm="\0";
dob=null;
doj=null;
curr_dt=null;
salary=0;
void getdata()throws IOException
String dt;
BufferedReader br=new BufferedReader(new InputStreamReader(System.in));
//we can create date with these 3 type of objects
Format fm=new SimpleDateFormat("dd-mm-yyyy");
DateFormat df=new SimpleDateFormat("dd-mm-yyyy");
//object of base class are type compatible with the object of derived class
SimpleDateFormat sdf=new SimpleDateFormat("dd-mm-yyyy");
System.out.print("\nEnter the name of Employee : ");
nm=br.readLine();
try{
System.out.print("\nEnter the date of birth of Employee : ");
dt=br.readLine();
dob=(Date)fm.parseObject(dt);
System.out.print("\nEnter the date of joining of Employee : ");
dt=br.readLine();
doj=df.parse(dt);
}catch(ParseException e){
Date d=new Date();
curr_dt=sdf.format(d);
System.out.print("\nEnter the salary of employee : ");
salary=Integer.parseInt(br.readLine());
void putdata()
System.out.println("\n\n\nEmployee Name : "+nm);
System.out.println("\nDate of birth : "+dob);
System.out.println("\nDate of joining : "+doj);
System.out.println("\nCurrent date : "+curr_dt);
/*if((doj-curr_dt)>1)
salary+=3000;
System.out.println("\nSalary of Employee : "+salary);
class emp
public static void main(String str[])throws IOException
employee emp[]=new employee[1];
System.out.println("\nEnter the detail of employees \n\n");
for(int i=0;i<1;i++)
emp=new employee();
emp[i].getdata();
System.out.println("\n\nDetail of employees are\n\n");
for(int i=0;i<1;i++)
emp[i].putdata();
}*Output:*
Enter the detail of employees
Enter the name of Employee : Rajendra Sharma
Enter the date of birth of Employee : 10-10-1979
Enter the date of joining of Employee : 05-09-2004
Enter the salary of employee : 2000
*it is not showing date in the "dd-mm-yyyy" format and not showing correct month as well*
Detail of employees are
Employee Name : Rajendra Sharma
Date of birth : Wed Jan 10 00:10:00 IST 1979
Date of joining : Mon Jan 05 00:09:00 IST 2004
Current date : 17-08-2008
Salary of Employee : 2000Hi,
Use below code that will help u to sort ur problem.
import java.io.*;
import java.util.*;
import java.text.Format;
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
class employee
private String nm,curr_dt;
private Date dob,doj;
private int salary;
private String dobb,dojj;
employee()
nm="\0";
dob=null;
doj=null;
curr_dt=null;
salary=0;
void getdata()throws IOException
String dt;
BufferedReader br=new BufferedReader(new InputStreamReader(System.in));
//we can create date with these 3 type of objects
DateFormat fm=new SimpleDateFormat("dd-mm-yyyy");
DateFormat df=new SimpleDateFormat("dd-mm-yyyy");
//object of base class are type compatible with the object of derived class
SimpleDateFormat sdf=new SimpleDateFormat("dd-mm-yyyy");
System.out.print("\nEnter the name of Employee : ");
nm=br.readLine();
try{
System.out.print("\nEnter the date of birth of Employee : ");
dt=br.readLine();
dob=(Date)fm.parseObject(dt);
dobb= fm.format(dob);
System.out.print("\nEnter the date of joining of Employee : ");
dt=br.readLine();
doj=df.parse(dt);
dojj = df.format(doj);
}catch(ParseException e){
Date d=new Date();
curr_dt=sdf.format(d);
System.out.print("\nEnter the salary of employee : ");
salary=Integer.parseInt(br.readLine());
void putdata()
System.out.println("\n\n\nEmployee Name : "+nm);
System.out.println("\nDate of birth : "+dobb);
System.out.println("\nDate of joining : "+dojj);
System.out.println("\nCurrent date : "+curr_dt);
/*if((doj-curr_dt)>1)
salary+=3000;
System.out.println("\nSalary of Employee : "+salary);
class emp
public static void main(String str[])throws IOException
employee emp[]=new employee[1];
System.out.println("\nEnter the detail of employees \n\n");
for(int i=0;i<1;i++)
emp=new employee();
emp[i].getdata();
System.out.println("\n\nDetail of employees are\n\n");
for(int i=0;i<1;i++)
emp[i].putdata();
thanks,
prabhu selvakumar. -
I tried to open a folder in my Documents. It does not show in any window but does show up when I am half way between windows. It did the same thing when I tried to empty the trash. It asked if that was what I wanted but I could't say yes because it was or
what is your question/issue here? did the folder have any content in it to begin with? screen shots of what you may be seeing?
if english isn't your native language, write it in what you are most comfortable speaking in to describe your issue. -
The web site of Adobe does not show correctly in FireFox
I have a bizarre problem. The site of Adobe (including where I can download the flash player) does not show correctly in FireFox and I only see it as a text HTML page, but without most images (typically, for instance, I do not see the image "Download now" but see a text line "Dowload now", and so on...
This seems to specifically affect the Adobe web site as I have no problme for other web sites (so far).
It is something specific to FireFox as I do have the problem with Internet Explorer.
The problem persis even if I restart FireFox without any add-on (safe mode).
Any suggestion ?Does this only happen in Firefox? What do you see with Internet Explorer or Chrome? If it is only Firefox, I'd try these steps in this order:
1. Clear your cookies and cache
2. Reset your Firefox settings
3. Make a new profile
Chris -
This is my site http://globaledsource.com/ then the characters is not showing correctly. This is what happen in my site http://globaledsource.com/wp-content/uploads/2013/03/MAS_ThemeProbleme-1024x1024.jpg
Hi paulique, the simplest next test would be to disable all plugins and extensions (except Shockwave Flash, which is pretty much indispensable) here, restart Firefox, and see whether your font works without them:
orange Firefox button (or Tools menu) > Add-ons > Plugins category<br>
orange Firefox button (or Tools menu) > Add-ons > Extensions category -
Spot colors not showing correctly in acrobat 11
Spot colors not showing correctly in the output preview as well as the page correctly. I have a spot pms
295 on a page in a few different areas of text and backgrounds. The spot color shows on 1 of my backgrounds
and text and a spot color on another background does not. These items are on the same page. Although I
can use the eyedropper to check the color of these items and it states the spot color is present. The page
also prints correctly. Previews not happening.I included 3 screen shots from Acobat 11 of the test requested. Also, included the last screen shot from Acobat 9 of same file.
Which shows correct preview. To eliminate possible ICC profile issue. I did change profiles to all that were in the profile list
with no change in either test.
Maybe you are looking for
-
How to add own selection version in LDB selection
Friends, I'm using the logical database KDF. Is it possibe to add selection version in the KDF?? I tried to edit the selection of KDF but system asks for developer key. Please suggets a way. Many Thanks, Albert.
-
MacBook pro and uncompressed editing????
I'm about to buy a 2nd edit system (currently running dual G5, AJA IO, with FCP 5 and, 3TB of SATA uncompressed storage) I need this next system to be mobile but still do uncompressed video. I see that you can use the AJA IO with the old MacBooks but
-
Time Machine Problem, Please Help.
Hi, I have a new MacBook Air and TM just doesn't work. I keep getting the "backup volume cannot be found" error message. I've trashed the preference file in Library, quit TM, restart again, and repaired permission to no avail. I have also reinstalled
-
Hi Experts, Table V_512w_d is used for what reason ? A little brief ans is expected. Thanks in advance, Riya
-
Business Area - Substitution Rule?
Hi Gurus, I need help with creating a substitution rule for a business area. The scenario is as follows- We have multiple company codes in different regions that sell their product system wise to company code XXXX. We are using one business area YYYY