Sales Document Number ranges Split

Hi ,
We need to load from DSO to Cube by splitting the load on Sales order Document number because of the volume.
Can you please help me how do we split the ranges , how can we find the starting sales order and the ending sales order .
regards,
Sruthi

Hi,
As per my understanding, you are trying to load data from DSO to cube on sales document number selection.
To see the data in ODS, Right click on ODS -
> Manage -
> Contents ---> Click on Active table.
You can see records in table. Sort the entries, then you can find the sales document numbers in order.
You have to do full load.
Hope this helps,
Regards,
Rama Murthy.
Edited by: Rama Murthy Pvss on Nov 17, 2009 2:40 PM

Similar Messages

Sale document number range

Dear all,
I've a small issue with sales document number range. I create a range 01 from 1 to 4999999 by tcode VN01. But when the first sale document is created, the system gets the number 1000001 & assign to this sale doc. (Not 1 as usual). Do you know the reason why ?
Thank you very much for your help,
Regards,
Tweety.

Go to VOV8, select the sale document type and execute. There ensure that this 01 is assigned to Number range int.assgt
If not, maintain 01 and retry to create a sale order.
thanks
G. Lakshmipathi

Sales order number range

Hi all,
When we save the sales order, One number will generate based on the sales document number range, client requirement was based on plant sales order number should be generate. So what are the configuration i have to do this?

Hi,
I would recommend what JP has mentioned in a previous thread.
But be very careful when you develop such an enhancement. Plant is in the sales order line item table (VBAP) But the sales document number (VBELN) is in the sales order header.
Imagine you have a sales order with 2 line items. One has "Plant 1" and this other line item has "Plant 2". In that case, how does your enhancement generate a number for your sales order? Either you should not allow users to create a sales orders with different plants in different line items (One sales order can have one plant)
Else the best way is to take any other combination in the sales header (VBRK) to design the solution. (Like Sales Org)
Thanks and best regards,
Rahal

Accounting document number range by division

We have a customer that has the following scenario: One company with two divisions, for differente countries.
Company code: 200
Divisions 281 and 284
When trying to release to accounting in VF02 a document created in division 284, is it possible to assign it to a different number range than the one used by division 281 ?

Hello,
If this a real scenario?
Ideally speaking for operations in each Country we create a seperate Company code. (except for Euro one)
Secondly Division is a two character field not three character as you have mentioned.
Further I feel your requirement is not possible with SAP Standard settings.
But if you sales Invoice number ranges are seperate for each Division, then there are couple of threads in the forum explaining the process to have same Sales Invoice & Accounting Number Ranges. Request you to search the forum & you will find a solution.
Thanks,
Jignesh Mehta

Accounting Document Number range error

Dear All,
As per my client requirement 3 types of billing document is thier. SD Consulant maintain the number range below
1. Domestic billing (Number range between 000040000- 0000401000 )
2. Export billing (Number range between 0000900001-0000901000 )
3. Cash sales billing (Number range between 0000900001-0000901000 )
In VF01 billing is saved for above billing documents. But not posted into Accounting Documents.
I am gettin error " Incorrect Doc Number 40000 select the document number between 9000001-901000"
In my understanding FI Consulant maintain the same number range the Account Document automatically posted in to Accounting. How to maintian the 3 number range in FBN1.Plz help me.
Thanks and regards
chandra

Hi,
In FBN1 FI Consultant maintain the number range Cash sales billing (Number range between 0000900001-0000901000 . This Cash sales billing posted to account, other billings not posted to accountg. plz guide me.
Thanks and regards
chandra

Sales Document Number field in ORDER05 IDoc

Hi All,
I am using a ORDERS05 message type for my inbound IDoc. I am using the copy of FM IDOC_INPUT_ORDERS. I am getting a Sales Document Number from BizTalk apart from other details. I want to feed this Sales Document Number in IDoc segment, so that the order is posted with the fed sales document number instead of system generating one.
Please let me know in which segment and field, I should assign the Sales Document Number (received from biztalk) in the IDoc?
Thanks in Advance,
Bipen

Pass external Order number in segment E1EDK02. Set the field QUALF as '066' (External Order Number) and pass the order number in field BELNR (See code lines 69 to 73 of include LVEDAF5S). This assignment will work only if the Number range configuration for Order document type is External.

Document Number ranges

Dear All,
Pls help me to solve the issue reg document number ranges.
We have defiend the document number ranged for two company codes. Now ths issue is.. this document number range is being used/shared by both the company codes. For ex.. Invoice 01, 02 and 03 is posted in the company code A and we have not posted any Invoice in the Company Code B. If we post the Invoice in the Company Code B, number for the Invoice will be 04. And the next invoice in the Company Code A will be 05. But i will required to change the configuration to split the document number ranges..
Pls help me to do so.
Thank you

Hi,
This thing is obvious if the document number is being shared by more than one company code then it will act the following way...
for example :- Company code "A" is assigned with document number 01 and if you raise an entry it will take the range from 01...like document number generated will be 0000001
Company code "B" assigned with the same document number range 01 the next entry will create the next available number that is ....0000002
This happens b'cz its being shared by both the company codes.
Hence you have to keep seperate document number range for both the company code to avoid this confusion.
Please assign points.
Zia.

How do I prevent a Sales Document number to be generated

Hi Experts,
I'm going to be using bapi_salesorder_create_fromdat1 to simulate a sales order create, but I will not commit it.
The BAPI has a flag that I can set to prevent a sales order from being created.
Problem is that:
It still generates a Sales Document Number, which I don't want to have happen.
Has anyone done something similar or at the very least prevent a number from being taken from the number ranges from config?
Regards,
Orlando

Hi Orlando,
as per your last thread i understand no sales order generated but number rage is taken.
so for your test purpose you can assign new dummy number range to order type and after your simaltion you can reassign the original.
I know this is not what you want but still this could be one of soultion to your problem.
hope this solves your purpose.
regards/ashu

B2B Sales Order Number range

Hi All,
We have one requirement in Billing document number ranges in SAP CRM.
For one Billing document type (ZX03) we need to assign two different number ranges , based on two different Sales Organizations.
For Example if the Billing document is created with Sales Organization u2018ABCu2019 it has to pick the number range 0001000001-0001499999 and if the same Billing document is created with Sales Organization u2018XYZu2019 it has to pick the number ranges 0001500000-000299999.
Does anyone have any idea how to get through with this issue? Which BAdi or Function Module can be used for this purpose? Any inputs on this will be highly appreciated.
Thanks in Advance.
Regards,
Namita

Cross post - Re: B2B Sales Order Number range

In FBL5N report user wants the sales document number to be displayed,

HI, Guys
Need ur help to sort out the problem
In FBL5N report user wants the sales document number to be displayed,
but the sales ducument number column is coming blank and this needs to pick from VBRP table
As I discussed with Abaper, he reqiures a key field which common in BSEG abd VBRP table
So,Please guide me in approaching the right way
Munender

Hi,
Speak with your SD consultant. They can set up the copy control in SD so that the sales order is populated in the invoice in field ZUONR (Assignment).This will then copy to the assignment field in accounting.
Alternatively you can use an exit to populate another field during the Posting.
Kind regards

Document number range not creating in Ecc 6.0

Hi
I have tried creating document number range in 6.0, but the change interval buttion is in display mode and not in the change mode, so not able to cretae number range. Any input.
Urgent please help.

Hi Sidhu,
It could be the limit of the authorization.
So try to check whether you have an authorizatin to change the interval or not.
Hope it helps.

Sales Document number in FBL5N

Hi Friends,
In FBL5N (customer line item report) there is a field "Sales Document" Field Name "VBEL2". But the accounting document which is generated in FBL5N for billing document from SD in not populating the sales order number in this field, this field is blank.
this field is getting populated for down payments with relevant sales document number and not for invoice document.
Our client wants the sales order number to be reported in customer line item report for their tracking.
Can any one please suggest how this can be achieved.
Thanks & Regards

You can map Sales Order number to either 'Assignment' or 'Reference' fields in accounting document using Copy control function in SD. Please use transaction VTFA, this needs to be maintained for combinations of billing type and sales document type. Please ensure these fields are not currently used in your system for other information.
Following fields can be mapped to 'Assignment' or 'Reference'.
A Purchase order number
B Sales order number
C Delivery number
D External delivery number
E Current billing document number
F External delivery no. if available, otherwise delivery no.
If you currently use 'Assignment' or 'Reference' fields for other details, you can use user exit EXIT_SAPLV60B_008.
Thanks
Venkata Ganesh Perumalla
Edited by: Venkata Ganesh Perumalla on Oct 4, 2010 11:52 AM

Sales document number not appearing in Work Item.

Hello gurus,
     I have created a WorkFlow for approval of Sales order. My problem is, the sales document number is not appearing in the WorkItem for user decision task. I am passing container variable the sales document number in the Parameter1 of the User Decision task of the work flow. Value is populated correctly in the container variable for sales document number, but fails to appear in the work item content in SBWP.
     Please suggest a solution.
Regards,
Dnyanesh.

Hello All,
     Thanks for your reply.
I am passing the value of sales document number in parameter 1 of the standard task for approval as below.
But in my Business Workplace I do not get the Sales document number. Below is the screenshot.
Regards,
Dnyanesh.

How to populate the sales document number in FD10N or FBL5N report

Hi Gurus,
In the reports FBL5N and FD10N i am able to see the Billing document field(VBELN) populated with the number but The sales document number (AUBEL) is not populated with the number.
How to get this number updated to the FBL5N or FD10N report.
Thanks in advance.

Hai
Goto Settings Special Fields and add the required fields and save and come back and exceute again.
Regards
Raghavendra.M
SAP-Practice

Document number ranges changes

Dear friends,
While creating the document number ranges for current year, user wrongly changed the previous year number ranges, now it is giving new number ranges for new documents which are posted in previous year, how to reset the previous number ranges with out effecting the documents which are already posted.
regards,

Dear,
It is the only way to insert a correct number rang to the current year, and change the document No which posted to previous year wrong to the correct fiscal year. then correct the "current number" to the last one posted in previous year.
But these corrections need necesary authorizations and ABAP knowledge.
With Best Regards,
Gladys xing

Sales Document Number ranges Split

Similar Messages

Maybe you are looking for