Sales group not assigned to sales office

Hi,
When i tried to create ERP quotation from Opportunity, "Sales group not assigned to Sales Office" error is arised.
With Regards
Selvam T

Hi Selvam,
Check in Opportunity the sales org. u have used. Then go to path: SPRO-> CRM-> Master Data-> Org. Mgmt-> Assignment of Org. units from SAP ECC.
In this node, check the corresponding sales group you are using in ECC and then go to ECC and map the sales office and sales group.
If you dont want to use sales group or sales office then go to tx. PPOMA_CRM in CRM. Select the org. which you are using, then click on Function tab, select Sales radio button and delete the assignment for R/3 sales office and sales group and uncheck them as well.
Let me know in case you need any further information.
Warm Regards,
MG

Similar Messages

Sales group not filled form sales order header in PGI accounting Document

Hi all,
we are creating a sales order . when sold to and ship to is entered the sales group at the header level is fetched from the customer master automatically.
Now after changing the sales group,different from customer master,the sales order got saved as usual with a warning mesaage 'sales group is diiferent from customer master'.
After doing PGI and billing , the sales group fetched in billing document is same as that of sales order header,but when good issue delievry document is displayed , in accounting document of the material document (ie. in FB03),the sales group in profit segment tab is getting filled from customer master.
Now the requirement is to fetch the sales group from sales order header instead of customer master.

hi
check your copy control settings and change if required

CRM ORG is supporting only one sales group to only one sales office,

Hi Users,
CRM system is supporting only one sales group to only one sales office, not supported to multiple sales offices.
Per ex : Sales Organization     Distribution Channel     Division        South Sales Office     South Sales Group
                                     AJE                                 EX                        BP        S100                            S01
                                     AJE                                 EX                        BP     S101                             S01
                                     AJE                                 EX                        BP     S103                             S01
                                      AJE                                 EX                        BP     S104                             S01
                                     AJE                                 EX                        BP     S105                             S01
Sales group S01 assigned to sales office S100, but i need to assign my south sales group S01 to different sales offices in South region. in PPOMA_CRM is not supporting for multiple assignment.
Anyone can provide solution for above issue?

HI Denic,
I have got your point, already done all settings for enhanced.
Myside :
Under Sales, based on client requirement created as ( N E W S ) regions, under each region made 4 offices.
in SOUTH : OFFICE 1, OFFICE 2, OFFICE 3, OFFICE 4
IN NORTH : OFFICE5, OFFICE 6, OFFICE 7, OFFICE 8
IN EAST :     OFFICE 9, OFFICE 10, OFFICE 11, OFFICE 12
IN WEST : OFFICE 13, OFFICE 14, OFFICE 15, OFFICE 16
*BUT SALES GROUPS MAINTAINED ONLY 4 LIKE SOUTH GROUP, NORTH GROUP, EAST GROUP, WEST GROUP.*
IN ENHANSED ORG I HAVE MADE UNDER FUNCTION TAB IN PPOMA_CRM
FOR SALES -
> ASSIGNED SLS ORG & R/3 DIST CHAN, R/3 DIVI
   UNDER SALES --> SOUTH ---> ALREADY ORG INHERITED FROM SALES AND
          UNDER SOUTH --> OFFICE1 --> IN FUNCTION TAB SALES ORG INHERITED, SALES OFFICE           SELECTED AS OFFICE 1 AND CHOOSEN R/3SLSORG, R/3 DISTRCHN, R/3DIVI.
IN THE SAME FUNCTION TAB FOR SALES GROUP SELECTED SOUTHGROUP till THIS ITS WORKING FINE.
PROBLEM IS : -
For Office2 which is also belonged to south region, in Funtion tab inherited the sals org and assigned sales office but sales group i have to select southgroup only again for office2 also.
But system not supported bcoz southgroup already assigned to Office1.
Is there any solution inside PPOMA_CRM or we need to change the hierarchy of my client sales structure?

Sales Office & Sales Group not copying from customer Master

I have a few values such as Sales district, Sales Office, Sales Group transportation zone etc in Customer Master.
However, only sales office and sales groups are not copied over to SO upon creation. Does anyone know why?
Thank you.

Hi,
If the sales office & sales group is maintained in the customer master , it should get copied to sales order.
It seems sales office is not assigned to sales area .Kindly check below config
1. Sales office assigned to sales area , below is the path
Enterprise structure --> Assignment --> sales and distribution --->assign sales office to sales area
2. Sales group assigned to sales office, below is the path
Enterprise structure --> Assignment --> sales and distribution --->assign sales group to sales office
Hope this will help.
Regards,
Sanjay

Ship to party not assigned to sales area

Hi everybody
When I am creating sales order for a customer in the sales area into which it's CMR is maintained eg. 1000, 10 , 00. I get an error message ' ship to party...is not assigned to sales area 1000, 10, 01.'' Here SP is also SH.
I checked the common Distribution Channel & common Division Master Data & the ref dc & ref dv are properly maintained. I don't know from where system is taking division 01.

Hi,
Please check VOV8(Sales documet type control).Here in the document type which you are using,check if Item condition field is marked.If it is marked then system is checking the division of the material you are using.
Extend the customer to 1000/10/01 and then try creating the order.
Reward points if useful
Regards,
Amrish Purohit

Sales group not generated in CRMC_R3_ORG_GENERATE

Hi all,
I am having the following issue: when trying to replicate org. strucuture from ECC 6.0 to CRM 5.0, after generating the lines I intend to replicate, all lines have red status.
I assume this has to do with the fact that org. units for CRM sales groups are not being generated, even though R/3 sales groups are detected. For sales org. and offices, org. units are being generated.
I would appreciate if anyone could help me with this.
Thanks in advance.
Regards,
Joã

Hi João,
I'm afraid there is no place to check the error descriptions for that process.
That report was design to run only one time. If you run it twice, and if one of the sales group was already used in the first run, it will generate an error entry for that second run (showned in bottom table).
In this case the best you can do is to create those configurations manually in the Organization Model maintenance program (t-code PPOSA_CRM). Or (not recommend) if you want to start over again and have no historical data maintained yet in the system and want to undo all your CRMC_R3_ORG_GENERATE runs, you can erase all organizations created by that program in PPOSA_CRM, and delete the log history of CRMC_R3_ORG_GENERATE by debugging the program.
Kind regards,
Bruno

Sales Representative # not assigned

Dear All.
i created a query based on SAP best practices for Sales Analysis, when i try to create a query to see the Sales by Sales Employee or when i try to drill down in existing query by Sales Representative it gives me # Not Assigned.
please help and let me know where to assign.
kind regards,

Hi,
Check if Sales Representative is a characteristic in the underlying info provider(cube or DSO).If so check if has data and whether has a mapping in the transformation.
Or else see if it a navigational attribute...if so, see if the master data for the info object, for which it is an attribute, is loaded.
Also activate master data for that info object.
Hope it helps.
Regards,
Rathy

Sales group not coming from Customer

Hi,
When using complaint process Sales group field (VKGRP) get popupated with customer data. Upon entering next order for other customer VKGRP is not taken from this customer - previous value is kept. This is visible in VA01 and can be manually deleted - which is obviously a space for mistakes. I wanted to use MV45AFZZ - USEREXIT_MOVE_FIELD_TO_VBAK as described in OSS note 67498, but this does not work in 5.0 - note is valid only till 45B. OSS 67498 solution is as follow:
*& Title: Note 67498                                                   *
Form Userexit_Move_Field_To_Vbak.
if svbak-tabix = 0.                                    " <<<< insert
    vbak-vkbur = kuagv-vkbur.                            " <<<< insert
    vbak-vkgrp = kuagv-vkgrp.                            " <<<< insert
endif.                                                 " <<<< insert
Anybody would know how to achive this in 5.0?
Thank you,
Adrian

If it was a correction during version 4.5B then ideally it should be part of the standard package in ECC5, I don't know why this problem is coming?
Regards,
N

Sales Document Type Assignment to Sales Area (OVAZ)

Dear Gurus,
I have the following problem.
These are my sales areas which have been created into SAP as follow:
ZV     Dep. Vanz TCPS     99     Distrib. channel 99     ZA     Retail
ZV     Dep. Vanz TCPS     99     Distrib. channel 99     ZB     Wholesale
ZV     Dep. Vanz TCPS     99     Distrib. channel 99     ZC     Key Accounts
I managed to assign the following list of documents to the first one:
ZV     Dep. Vanz TCPS     99     Distrib. channel 99     ZA     Retail
IN     Inquiry
QT     Quotation
CS     Cash Sale
FD     Deliv.Free of Charge
DR     Debit Memo Request
DS     Scheduling Agreement
QP     Rental Contract
RE     Returns
RO     Rush Order
OR     Standard Order
SC     Service and Maint.
Now, when I want to do the same for the 2 last Sales Area the system asks me to create them?????
What is wrong?
Please advise
Kind regards
Chris

Your basic understanding is different from what SAP offers.
You have to create common sales area. For that you have to link your sales org to a common sales area first, d.c to a common d.c and division to a common div.
Then create a common sales area of the combination of common sales org/common d.c./common div
Now in OVAZ, yo only have to link ur doc types to the common sales area. This will enable you to use this doc types for all sales areas which are indirectly assigned to the common sales area.

Commission Group not picking in sales order

Hi
We have created the Commission Group (ie. 6 ) in product master in R/3 and successfully downloaded in to CRM product master. When we create the sales order in CRM the relevant commission is not being picked up in the order from the product master. When we check at the item level of the order under general tab by default the commission grp is taken as 1 instead of 6 which was maintained in the product master.
All the other date like Vol rebate grp , Product group and product hierarchy has picked up correctly from product master. Only Commission grp is not getting picked as maintained in product master.
Plz help.
Rgds
Praveen Raj

Hi Dave,
As you suggested first execute PP order settle to sales order which I have done. After that I have done RA on Sales Order through KKA3. It has saved the record and value flows correctly. After that while I am going to VA88 for Sales Order settlement it is asking for setlment rule which I doubt. If the Sales order is sender what will be its receiver ? During PP order settle to sales order it was PP order in sender and receiver category was material and reciver was Sales document Numeber. What will be its reciver when Sales order is sender.
Kindly need your valuable suggestion ...
Best Regards,
Samrat Roy
Edited by: Samrat Roy on Feb 10, 2012 2:49 AM

Planning customer customer number is not assigned to Sales Organization

Dear Forum members,
I get the above error in the Marketing planner. I have maintained the Sales organization in the Sales Area data for the Business Partner for which I get this error. How can I get rid of this error?
Regards,
Sowmiya

hi,
we upgrade our CRM system from 5.0 to 7.0. We are facing this error to. I think you solved it, what is the problem, or what is the solution? please help..

Sales order type assign to sale organisation

Hi Gruz,
In our system, we have more than one sales organisation/companies. There are lot of sales order types in the system used by different sales organisation/companies.
Where can I check which are the order types are assigned to my sales organisation.
Many thanks

Hi
Your requirement is not clear to me..
Still,
When can I raise invoice without delivery note. (setting required)
In Service orders you need Invoice w/o delivery. Use billing type F1
Also when I have to raise delivery note before I will raise invoice (setting required).
Not clear...creating delivery before invoice is a normal sales cycle..
Reg
JJ
Edited by: Jagsap on Oct 23, 2009 5:51 PM

SAles Order not appearing in Sales Data Warehouse SAles Order List

Hi Gurus,
Can you help me in this regard :- My Sales Order has been invoiced but its not appearing in the Sales Data Warehouse Sales Order List.

Hi poonam,
I don't get clearly, but mean here your sales order doesn't exist in your cube or ODs in BW.
If so check the delta load has been done or not.
Before that check in tables VBAK (Header data) and VBAP (Item data) , wheather your sales order exists.
Hope this helps.
Regards,
Reddy

Special gl activity and groups not assigned urgent

hai all
plese any one can help me out i am getting error in special purpous ledger
This document will not be posted in a FI-SL ledger, because no ledger is assigned to the combination activity/company code or activity/global company.
System response
The posting is not carried out.
Procedure
Check the assignment of the ledgers to the activity/company code or activity/global company.
Customizing Ledgers
This error message only appears if you defined the activity, so that each document line has to be posted to FI-SL.
Customizing Activities
error in abve transacton cods
kindly needful urgent
thanking you
babu
Edited by: babu sap on Apr 14, 2008 7:16 AM

Hello,
Please check the transection code GCG2 make proper assigment there.
Regards
Ravi

Assignment of single Sales group to multiple Sales offices not possible

Hi all,
We need to assign single sales group to multiple sales offices in CRM. When we try to assign a Sales group to more than one Sales office the first assignment between Sales group and Sales office is removed. Only the new assignment is available.
Instead of having two assignments I still only get one.
First I transfered the ECC organization as Standard backend integration. When I realize I needed multiple backend assignment I ran the Conversion to multiple assignments. However, I am not able to realize multiple assignments.
Is it not possible to realize multiple assignment if you first transfered the ECC organization as standard (single) assignment?
Please let me know how to overcome this problem.
Regards
Anders

Hello Anders,
Starting CRM 4.0 multiple hierarchy with this enhanced org data model
works the following way:
- 1 R/3 org data mapped to ONLY 1 CRM org unit.
- multiple hierarchy (1 sales office assigned to several sales org,
1 sales group assigned to several sales office) is managed in the detail
of the org unit with tab Function and with sub tab sales office
and sales group.
For example if you have following R/3 org structure:
Sales org SOr1
_ Sales office Sof1
_ Sales Group Sg1
_ Sales office Sof2
_ Sales Group Sg1
Sales org SOr2
_ Sales office Sof1
In PPOMA_CRM you have to do the following:
For the R3 mapping :
Sor1 mapped to org unit 50000001
Sor2 mapped to org unit 50000002
Sof1 mapped to org unit 50000003
Sof2 mapped to org unit 50000004
Sg1 mapped tp org unit 50000005
And for the multiple assignment
- For sales org 50000001 and 50000002 you just have to maintain in tab
function, sub tab Sales org the Distribution channel division values
- For sales office 50000003 in sub tab Sales office the assignment to
sales org Sor1 and Sor2
- For sales office 50000004 in sub tab Sales office the assignment to
sales org Sor1
- For sales group 50000005 in sub tab sales group the assignment to
sales office Sof1 and Sof2.
If you have different division distribution channel on sales office sale
group compared to the sales org you can maintain manually the values.
Or if is it always the same values you can use * value for distribution
channel division (in that case please read carefully notes
691015 and 735020 if needed)
In addition regarding report CRMC_R3_ORG_GENERATE I would like to
clarify that this report can only be used for initial download, as
written in the customzing documentation of this report (spro-CRM -
master data - org management - data transfer - Copy SAP R/3 sales
structure ) it can only be executed once and so following org
modifications have to be done manually in PPOMA_CRM.
So for this report the correct way to use it is to create all the R/3
org data in 1 shot.
If only 1 R/3 org data is already mapped to a CRM org unit in ppoma_Crm
you will have red light and so it will be impossible to create all
dependent org data.
Hoping i have been able to clarify how it works.
Regards, Gerhard

Sales group not assigned to sales office

Similar Messages

Maybe you are looking for